How to display image in top level navigation

Hi,
how can i display an image in the top level navigation?
(looks like the top level navigation of the SDN)
Thanks,
Norman

Hello Norman,
Please read through these forum links which also deal with customization of Portal 'Top Level Navigation'.
Basically you need to download the required masthead.par and make the necessary changes as mentioned in the forum messages as belwo:
[Customizing Top Level Navigation|https://forums.sdn.sap.com/thread.jspa?threadID=511530]
[Customize Portal TLN|https://forums.sdn.sap.com/thread.jspa?threadID=1145007]
Hope this helps.
Regards,
Shailesh

Similar Messages

How to change Top-Level navigation design bar into an image?

Hi guru's,
is there anybody who knows how i can change the Top-Level navigation design bar into an image?
thanks in advance
greets
Kurt

Hi
Check this....
http://help.sap.com/bp_epv260/EP_JA/documentation/EP/N08_BB_ConfigGuide_EN_JP.doc
Regards

How to start Top-Level Navigation on Level two?

Hi,
does anyone known a trick how i can start the top-level navigation at Level two?
I make an own frameworkpage and try to set it in the iview properties, but there is not an property for this. it is only for the detailed-navigation iView there.
For what:
I need this, because i would open an pop-up with an other portal window. I link to the popup with navigation-target=... In this pop-up should only be the content of one role. This folder i have set to "invisible in the navigation area". So the User always see him in a popup. when i start at the default Top-navigation level 1, the user see all the other navigation folders.
Best regards,
Patrick

Hi Patrick,
up to SPS13, this needs some hands on on different parts of the TLN. What I've done this spring was showing all top-level nav targets within a select box in the masthead and then, after having selected one of these entries, the TLN shows just the content of this top level entry. So this is more or less the same. As said, some work to do.
As of SPS14, with the new navigation taglib, I expect this to be much less work; anyhow, I didn't convert the results into SPS14, so I cannot say if this is really as easy as I expect.
Hope it helps
Detlev

Link to top-level navigation items

hi all,
does anybody know how to create a link to a top-level navigation item from an jsp iView? the idea is similar to Home-page and area-page concept in the new ESS with WebDynpro. From the home-page, users can navigate direct to an item which is displayed in the top-level navigation. fyi, we are on EP6.
Thanks in advance.

Hi,
You can create links to any navigation node, the keyword here is NavigationTarget.
Check this for more:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/014421d21d6fade10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/b3/7b8163404448e7aad7899c0b30313e/frameset.htm
Regards,
Praveen Gudapati

Portal Top Level Navigation

Hi,
How can i remove the display bar on Top Level Navigation(Left side).
Thanks.

Hi Shah,
Please follow the procedure:
<b>To Configure Top-Level Navigation</b>
1. In the Portal Catalog choose <i>Portal Users</i> -> <i>Standard Portal Users</i>. This folder contains the <i>Default Framework Page</i>.
2. Right-click <i>Default Framework Page</i> and choose Open -> <i>Object</i>.
3. From the Page Content List select the <i>Top-Level Navigation</i> iView and click <i>Properties</i>.
4. Scroll to the <i>Number of Display Levels</i> property and enter the <b>value 0, 1, or 2</b>, depending on how many navigation levels, if any, you want for top-level navigation.
<b> Choosing 0 removes your top-level navigation and displays your navigation structure in the Detailed Navigation iView. </b>
5.Click Save.
For more information see SAP Note <b>687485</b>.
I hope this solves your problem.
Regards
Pravesh
PS: Always consider rewarding points for helpful answer on SDN.

Can we control the top level navigation in portal from a java application

Hello,
I am having a scenario where User logged in to portal and assigned with 2 roles (HOME , ISA(Java application)). When user opened a form in ISA (Java application) and tried to enter the data in form and moved to another tab (e.g. HOME) in top level navigation.
When user come back to ISA (Java application) TAB , we show the page where he left earlier. I would like to know if user click any other TAB in top level navigation (Role assigned to him) while working on a page in ISA(Java application) is there any way we can catch that event before he leaves from ISA (Java application JSP page) to other TAB?
How can we control the top level navigation events in the portal from a java application .Since Top level navigation is seperate par file.
Thanks,
RN

Dear Rajesh,
Top Level and detailed navigation values comes with iteration in the respective par file.
Please check the par file and based on the value (i.e tab name) selected, you can write your code.
Best Regards
Arun Jaiswal

Show portal top level navigation in tab format to a tree fromat

hi all,
whn i assign roles to the portal they are displayed in the top level navigation in the tab format.''
Inspite of showing it in the tab format i want to show it in left croner in the tree format
>role1
        >attri1
        >attri2
>role2
        >attri1
        >attri2
Please help me in this...Awaiting for your response.

Hi, you can change the Look & Feel of Portal.
See link below to create a new Portal Desktop
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e549a890-0201-0010-3f8b-d3b852457ebd&overridelayout=true
Regards,
Edson Thomaz

"Top-Level Navigation" internationalization

Hi, experts!
I have this question:
How i can internationalize the "Top-Level Navigation" links (menu items) in my custom Role? Namely, how i can internationalize my custom Role/Workset/Page name?
Best regards
Alexei Rylov

Hi ,
Please refer to this steps for more details
http://help.sap.com/saphelp_nw70/helpdata/en/25/08174082fe1961e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/74/641640b7b6dd5fe10000000a155106/frameset.htm
Thanks
Pankaj

Display Icon/Image instead of Role name in top level navigation

Hi,
I want to display a image / icon instead of role name for a particular role. Can you please tell me how to achieve this ?
Thanks,
VP

Hi,
the thread is just for the background image (for all elements).
if you want to display icons instead of role names, you have to create your custom top level navigation using the
navigation taglib from SAP. There are lots of examples. make a blog search for Mr "Kannengiesser" from SAP.
In case you are using already an EHPx in your EP 7.0 the AJAX framework might have this feature.
Regards,
Kai

How to Display Detailed navigation passing Top level navigation node name

Hi All,
I have prepared a DLN par file but unfortunatly my requirement is such that I need to pass one of the toplevel node name as input parameter and that should display the corresponding DLN which is from 3rd level.
I have checked in sdn for passing a value to the navigation tag lib which will consider it as a selectednode but could find none.
Can some body suggest me how to acheive this.
Thanks in Advance.
Sai Krishna. K

Hi Kiran,
Thanks for your Reply..
Following is my Scenario:
I use 2 same versions of portals connected via federated portal concept.
I have my detailed navigation par file in portal2 and was calling it from portal1 from a iview.
Since I am not physically navigating in portal2(which mean there is no selected node to iterate ), when I call that iview in portal1 it is picking up only 1st node in top level navigation.
So i need to pass "My reports" (as 1st level) & "India" (as 2nd level) as parameters such that it gets only its DTN at all times from 3rd level.
Hope you understand my scenario, below is my iteration code logic.
<div id="myslidemenu" class="jqueryslidemenu">
<ul>
     <nav:iterateSelectedNavNodesLevel level="<%=START_LEVEL%>">
     <%-- the 'currentDepth' attribute provides the byte value of the current level --%>
    <nav:recurseNavNodeChildren currentDepth="depth">
         <% current = start + depth.intValue() - 1; %>
         <%=writeClosingTags(last - current)%>
         <%
        last = current;
        %>
        <%-- we want to distinguish between folder and leaf nodes so we can use different graphics --%>
          <%-- complete the html syntax for the 'class' attribute pass it as an anchor attribute--%>
          <li><nav:navNodeAnchor navigationMethod="byURL" />
          <%-- checks for additional navigation level and the appropriate html tags to accomodate them --%>
        <nav:ifNextRecursionDepthWillIncrease>
            <ul>
        </nav:ifNextRecursionDepthWillIncrease>
        <nav:ifNextRecursionDepthWillNotChange>
            </li>
        </nav:ifNextRecursionDepthWillNotChange>
    </nav:recurseNavNodeChildren>
    <%=writeClosingTags(last - start)%>
    <% last = start; %>
</nav:iterateSelectedNavNodesLevel>
</ul>
</div>
As per the passing parameter concept please explain me a bit more clear with step by step procedure.
<b>Here if not passing parameters, providing static values will also do for my requirement.</b>
Many Thanks,
Sai Krishna.
Edited by: Konchada Sai Krishna on Feb 14, 2009 9:42 PM

How to enable "top level navigation " in portal

Hi all,
I am unable to see the "top level Navigation" once I logged on to portal
Previously I was able to see that
I performed the following steps thats the reason why I am unable to see "top level navigation"
1 Logged on to portal
2 Content administration
3 Expanded Poratl Content
4 Expanded Content Provided by SAP
5 Expanded End User Content
6 Expanded Standard Poratl Users
7 Selected "Default Frame work Page"
8 In that selected Top Level navigation Iview and the iveiw properties I changed the property "Number of Display Levels " to "0" and choose save
As I have set "Number of Display Levels" to "0" I am unable to see "top level Navigation" Now,I want to change it to 2 for that I need to see the Content Administration role in the "Top Level navigation" Can anyone help me out how to enable "Top level Navigation"
Thanks in advance

undo the changes what you have done.
after you logon to the portal try the url below...this should take you to content admin directly from there modify the framework page and reset the property of TLN
http://yourserver:port/irj/servlet/prt/portal/prtroot/com.sap.portal.pagebuilder.IviewModeProxy?iview_id=pcd%3Aportal_content%2Fadministrator%2Fsuper_admin%2Fsuper_admin_role%2Fcom.sap.portal.content_administration%2Fcom.sap.portal.content_admin_ws%2Fcom.sap.portal.portal_content&iview_mode=default
Thanks
GLM

Top-Level Navigation Tab Image

In the top-level navigation it allows you to assign background colors for the tab colors when selected or not selected. However, you can reference an image with a unique path in this field. So when the top-level navigation renders it displays an image, gradient for example instead of a background color. I did this a while back but cannot locate this information. If someone has done this before and can provide this information that would be great.
--KAL

I just tested it, and did not manage to make it work.
I am in the Portal Outer Frame > Top-Level Navigation > Unselected Tabs of First Level > Background Color of Unselected Tabs
and this is the value I use :
background:url(http://<host>:port/irj/go/km/docs/documents/SDN/my_image.png)
Am I missing something ? Do I have to create a par file for this ?
Edited by: Fabien REVOL on Aug 6, 2010 9:28 AM

How to hide name of Role from the top level navigation of the portal

Hi Experts,
In my project, I have created 2 roles Role A and Role B. These roles have been assigned to User X.
When user X logs in, he is able to see name of role that is 'A' in the top level navigation.
As per the requirement, user X should not see the 'A'.
Rather user X should see following:
Top Level Navigation: 'My Work'
When user clicks on 'My Work', he should see
'My Sub Work1' and 'My Sub Work2'.
After that under 'My Sub Work1' user should see following
All Objects of Role A
All Objects of Role B
Name of role i.e. 'A' or 'B' should not be displayed at all at any place in navigation.
Only whatever objects has been assigned to Role A and B should be displayed in detailed navigation area.
Can you please let me know how to achieve this?
Pictorial Diagram:
                  My Work       (In top level navigation)
My Sub Work1    My Sub Work2    (In top level navigation)
_________Objects of role
A
       |
       |_________Objects of role
                               B
Please note that 'My Work' and 'My Sub Work1' and 'My Sub Work2) are not roles. They are just the name of folders.
Can you please let me know how to achieve it?
Regards,
Brian

Hi Brian,
Try the following steps.
1. Change the 'Entry Point' property of Roles A and B to 'No'.
2. Create a role folder called 'My Work' under A and B.
3. Set the 'Entry point' property of this folder to 'Yes'.
4. Set the 'merge id' property of the folder as "mywork" (or any other string) under both roles A and B.
5. Under 'My Work' in Role A,
a. Set the 'Merge Priority' property to 50.
b. create subfolder 'My sub work1' and create all your objects.
6. Under 'My Work' in Role B,
a. Set the 'Merge Priority' property to 100.
b. create subfolder 'My sub work2' and create all your objects.
7. Make sure the user is assigned both the roles A and B. Only then he/she can see objects of both the roles.
8. One thing to remember while merging folders is that, all the entities that are being merged should be at the same level. For eg: in our case, you cannot merge 'my subwork1' in role A, with 'my work' in role B.
Reward points if helpful.
Regards,
Priya

How to hide Top Level Navigation?

Hi,
I created a quicklink for an iview.
I am able to call the iview from IE window using the quicklink.
But it displays the top level navigation (Company Logo, Welcome message, Logoff, Role tabs,...).
How do I hide this?
Thanks
Sundar

Hi Vinit,
Your solution is working when I clicked the preview button in iview edit window.
But when I try to open the iview using Quicklink with external IE window, it shows the MastHead, TLN.
It is not hiding the MastHead and TLN.
Thanks
Sundar

Roles in top level navigation - display order

Hi,
how it is possible to define the order of display roles in the top level navigation?
If I add roles to a user in user administration the system automatically sort the roles. In this order the roles appear in top level navigation.
I want to define my own order. How is this possible?
Thanks in advance.
Regards
Andreas

HI
it is absolutely possible using sort priority
http://help.sap.com/saphelp_nw04/helpdata/en/92/3e703e632c7937e10000000a114084/frameset.htm
but keep in mind that it is valid for all user.
Regards,
Vijay.

How to display image in top level navigation

Similar Messages

Maybe you are looking for