How to display % in the report results

Hi Experts
I my BW report i am calculacting % using Calculacted KF.
I want to display "%" in the report
Ex: 2.5 should be displayed as 2.5%
How can i achieve this

Hi,
    In formula -- u have to select the Percentage Functions - then u select the [%A] Percentage share funtion.
     It will display the calculated value with percentage like ,50%.
Regards
RP

Similar Messages

  • How to display % in the report

    Hi,
    I  have a column in report which calculates percentage. Is there a way by which I can show % sign in the output too.
    Thank you,
    sam

    You have to use % function:
    KF1 % KF2
    Hope it helps.
    Regards

  • How do you export APEX report results to XML template

    Hello all,
    I would like to export the results of a report to an XML template(CSV removes leading zeroes which doesn't work for us) Where do you store the template and how do you export the report results to it?
    Thanks

    Hello, since you say it's just a question of formating why you want to use xml instead of csv maybe you wanna have a look at this thread:
    CSV Download Changing Text to Number
    There they are discussing the aspects of leadings 0.
    Regards, Tine.

  • How to pass values to be displayed on the report?

    I have an ASP.Net page that has values from the user that needs to be displayed in the page header of the report. Those values need to be passed to the report.
    I am using Crystal Reports 2011.  The code behind for ASP.Net page is written in VB.Net.
    I had thought of using Parameter fields in the report and using the SetParameterValue method of ReportDocument but I am not familiar with using Parameter fields.
    How to set up the report to do this?
    Sincerely,
    Keith Jackson

    Hi Keith
    DJ has some very good suggestions, but the first thing we want to do is to make sure the report works in the designer as you want it to. Reading this thread, I'm a bit unsure if the report does actually work in the designer - can you please comment on that?
    If it does, I like to go from simple as far as coding is concerned. In this case, that would mean not worrying about the parameters or logon and let the report engine do the heavy lifting for us:
    Create a new project. Throw a CR viewer on a form and add one line of code in page load:
    CrystalReportViewer1.ReportSource = <path to the report>
    The engine will prompt for the db logon as well as the parameters. Fill those out. The report should then display on the screen.
    From here we can get fancy and add DB logon code as well as the parameter code.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Udf Data is not being displayed in the report

    Hi all,
    i have designed one report in which i am displaying some udf fields along with other system fields.
    i have not used any selection criteria.
    when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
    If i open sales order and press 'Shift-F2'  and update the document and now if i run report then i get that udf value in the report.
    why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
    pls suggest some solution.
    regsrds,
    Chetan.

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

    Hello, all.
    In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

    Click the search magnifying glass and uncheck "Search entire library".
    Type in the name of the track.
    Click the album of interest to show tracks.
    Select the track.
    Press the X in the search box to clear the search.
    Double click the track you want to start playing first.
    tt2

  • How Can we improve the report performance..?

    Hi exports,
    I am learning the Business Objects XIR2, Please let me know How Can we improve the report performance..?
    Please give the answer in detailed way.

    First find out why your report is performing slowly. Then fix it.
    That sounds silly, but there's really no single-path process for improving report performance. You might find issues with the report. With the network. With the universe. With the database. With the database design. With the query definition. With report variables. With the ETL. Once you figure out where the problem is, then you start fixing it. Fixing one problem may very well reveal another. I spent two years working on a project where we touched every single aspect of reporting (from data collection through ETL and all the way to report delivery) at some point or another.
    I feel like your question is a bit broad (meaning too generic) to address as you have phrased it. Even some of the suggestions already given...
    Array fetch size - this determines the number of rows fetched at a single pass. You really don't need to modify this unless your network is giving issues. I have seen folks suggest setting this to one (which results in a lot of network requests) or 500 (which results in fewer requests but they're much MUCH larger). Does either improve performance? They might, or they might make it worse. Without understanding how your network traffic is managed it's hard to say.
    Shortcut joins? Sure, they can help, as long as they are appropriate. [Many times they are not.|http://www.dagira.com/2010/05/27/everything-about-shortcut-joins/]
    And I could go on and on. The bottom line is that performance tuning doesn't typically fall into a "cookie cutter" approach. It would be better to have a specific question.

  • Displaying metadata, how to display ONLY the Date

    I would like to display the Date below each image in Aperture 3. When I select "Date" in the Browser & Viewer Metadata window, the result is a very long string with the Date, the Time and the Time Zone. meaning that most of the time I see nothing because the string is much too long to be displayed...
    How to display ONLY the Date ?
    Thank you.
    Olivier

    om28 wrote:
    I will do that but still... if the Date could be ONLY the Date "without time and time zone", I would be able to display more information.. and it will look nicer.
    I said at the top of my first response above: +Afaik, there is no way within Aperture to change the date format of the date metadata overlay.+
    Send Aperture feedback to Apple via "Aperture→Provide Aperture Feedback"
    In the past I used Expression Media and the config for displaying such info was better.
    Aperture has a strange interface for it (and for other parameters), it does not behave at all like an Apple software (for the GUI), probably an external development team... but I agree it is more complex than iPhoto.
    Aperture is 10x more complex than iPhoto.
    If you want to see a rigid, boxed, "engineer"-style image database interface, take a look at Lightroom 3. It's a great program -- but it's a very different concept of information presentation and interaction.
    Thanks again.

  • Delete the reporting results from the workbook

    Hi,
    How telete the reporting results from the workbook  via the BEX menu functionality

    That functionality is not available in the Bex 7 Analyzer, just in the Bex 3.x functionality. To delete workbook results, we simply select the rows of data (but NOT the titles) and delete the rows in excel. Then save the workbook.
    If you delete the titles you will delete the analysis grid, and you will have to recreate it.
    You can also change the variable values, click "Cancel" and the workbook then shows no results for any query related field. However, this includes the navigation panes and text elements, which produces a rather blank looking workbook.

  • Displaying only the newest results below. To view all results, narrow your query by adding a filter.

    Hi,
    In one of my list there are 33,000 records.
    It gives message "Displaying only the newest results below. To view all results, narrow your query by adding a filter."
    I don't want to change my threshold limit. Can anybody please tell me steps to resolve this issue?
    Regards,
    Amit Khatri

    I have a list of 11,000 items. Even though I have setup filters on it and it shows all 10 records based on that filter, it still shows that warning on top. For some items, even with those filters, I don't see the list items at all. How do I deal with
    this situation. I don't want to change my threshold limits from CA either. Please help.
    MAK

  • Total time taken for the quiz needs to be displayed in the report

    Hi,
    I would want tthe total time taken for the quiz to be displayed in the report...Let me know if its possible

    Hi,
    Please try this.
    Define three user variables - StartTime, EndTime and Duration.
    At the start of the quiz ('On Slide Enter' of the first Question Slide). have an advanced action with the following actions.
    Assign: StartTime with cpInfoElapsedTimeMS  
    Continue
    At the end of the quiz ('On Success' or 'On Failure' of the last Question Slide or 'On Slide Enter' of Result Slide), have this advanced action.
    Assign: EndTime with cpInfoElapsedTimeMS
    Expression: Duration = EndTime - StartTime
    Expression: Duration = Duration / 1000
    Continue
    The variable 'Duration' will have the time taken by the user for the Quiz in seconds.
    Let me know if you have any queries.
    Thanks,
    Thejas

  • SSRS tablix not be visible when no data is selected to display on the report

    In an SSRS 2008 r2 existing dashboard application, I display a tablix (as a header) based upon the following selection criteria:
    =iif(Len(First(Fields!CustomerNumber.Value, "Main")) = 0, true, false).
    The CustomerNumber value is passed between the various SSRS reports in the dashboard application. There are times when the Fields!CustomerNumber.Value is selected for a particular report and there is no detail data to display. What happens with the existing
    reports, is the space that would be allocated for the tablix is shown.
    When there is no data to display, there is a NoRowsmessage that can be displayed on the report.
    Basically when there are no detail records to display on the report, I would like the tablix report header not to display when there is no detail data for the report.
    Thus can you tell me how to code the tablix report header not to display when there is no detail data?

    Sorry, I overlooked Katherine's simple solution, partly because the header doesn't go away, it is just replaced with something that cannot be differentiated from the report background. Keep in mind that the space the tablix is in is still occupied by the
    tablix as you can see below:
    Sample report with no data and an empty rows message of "  ".
    Above is the same report without a no rows message but with the header row hidden using thisformula: =IIf(Count(1)>0, false, true). You can see that the space that the header normally occupies is collapsed away when hiding the header whereas the spaces
    ("  ") occupy that space when using the no rows message.
    "You will find a fortune, though it will not be the one you seek." -
    Blind Seer, O Brother Where Art Thou
    Please Mark posts as answers or helpful so that others may find the fortune they seek.

  • How do I reorder the form results from a non-BC form in Muse?

    I have a problem with Muse, in that the emails that get delivered from filled-in forms have various fields in the wrong order and not the order that the fields appear in the actual form.
    How do I ensure the form results emails maintain the order of the fields in the form?
    For example, on the www.actconstruction.com Subcontractors form, several of the fields are wildly out of order. Here's a screen capture of the form results email:
    Here's the form as it appears on the site. You can see the fields are in completely different order to the results emai:
    So, how do I make sure the fields follow a particular order that I want them to (i.e. in the order I placed them in the form itself)?
    The form can be seen at www.actconstruction.com/contact-us.html. This shows the actual order of information. The form results email should follow the order exactly as shown on the web site.
    I've had complaints from clients about this and need to handle it immediately. Please have someone get back to me with a figure-out.
    Many thanks,
    Len Williams
    727-466-6888

    I have a problem with Muse, in that the emails that get delivered from filled-in forms have various fields in the wrong order and not the order that the fields appear in the actual form.
    How do I ensure the form results emails maintain the order of the fields in the form?
    For example, on the www.actconstruction.com Subcontractors form, several of the fields are wildly out of order. Here's a screen capture of the form results email:
    Here's the form as it appears on the site. You can see the fields are in completely different order to the results emai:
    So, how do I make sure the fields follow a particular order that I want them to (i.e. in the order I placed them in the form itself)?
    The form can be seen at www.actconstruction.com/contact-us.html. This shows the actual order of information. The form results email should follow the order exactly as shown on the web site.
    I've had complaints from clients about this and need to handle it immediately. Please have someone get back to me with a figure-out.
    Many thanks,
    Len Williams
    727-466-6888

  • How can I run the report for different input values at the same time?

    Reports version: Report Builder 6.0.8.13.1
    Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
    I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
    I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
    In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like “o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
    How can I run the report at the same time for all the input values and save the time?
    Thanks in advance.
    Kishore.

    Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
    and then atleast 4 or 6 reports will run simultaneously.
    For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
    Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
    http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
    Thanks
    Subodh

  • How can we put the report which is generated by the program into spool??

    How can we put the report which is generated by the program into spool??
    I had generated a file in Unix which had the report but now the requirement has changed.
    Regards,
    Shashank.

    Hi Shashank,
    If the program is executed in the background and it has the write statement then the spool will automatically generated.
    Reward points if useful.
    Regards,
    Atish

Maybe you are looking for