How to Display Mutiple CostCentre Hierarchies in the Report

Hi Team,
As we have multiple Hierarchy groups defined in R/3 for Cost Centres, I would like reflect he CC values in the CC report where it is showing the default Hierarchy (only) whereas others are appearing in NotAssigned, is there a way to handle the system to display all Hierarchies listed in the 'Restrictions' more than one Hierarchy.
your expert adivse is highly appreciated.
Thanks in Advance, BR.

Gentlemen any luck..!

Similar Messages

How to display dynamic header title in the report?

I have a req to display dynamic header title in the report.
When a id is entered in the prompt text, it will display the user data based on that user_id.
so similarly....the header title should vary each time when you select different user_id.
How can we implement this?

>
Zack H wrote:
> Lazaro,
>
> It depends on what you want displayed in the heading for each id.
> Please elaborate.
>
> Thanks,
> Zack H.
Zack..I have several projects listed under several project id's...
so when a user selects project id 00164 then it should display something like "Project document for Jon Doe"
again when the user selects project id as 00192 then it should display something like "project document for Zimmerman"
Did you get it??

How to display mutiple form contents on the same page

I have multiple forms for a same page,when i press submit in one form it has to go to next form,where both form contents should display on the same page.Can anyone post example code for this?
Thnx in advance.

I have multiple forms for a same page,when i press
submit in one form it has to go to next form,where
both form contents should display on the same
page.Can anyone post example code for this?that's not how it works. when you press submit, the form data is submitted to the server. you can then forward the user to a page with another form, but what you're talking about doesn't make sense

How to display a table name in the report

Hi,
I have a requirment about the display of pivot table. When we drag a column to see its result, we always see his column name, now what I want to show are both table name and column name..
like:
District_D
Region District
China Beijing
India Chennai
Regards,
Anne
Edited by: anne on Oct 25, 2011 2:39 AM

Hi Anne,
If you want to implement Dpka's solution (hardcoding table and column values in column heading and add line break in between), you will need to add the below entry in instanceconfig.xml file. Refer http://gerardnico.com/wiki/dat/obiee/hardenxss
<HardenXSS>false</HardenXSS>
This will enable the HTML elements to be treated as HTML and not plain text. After adding the above entry in the xml, restart your presentation services and test your solution.
Thanks

How to display only Negative values in the report.....

Hi,
I want to display only negative values for one particular column.
Any suggestions ?
Thanks,
Jeetu

Hi,
define a condition for all characteristics and for specially the keyfigure. Set it to < 0. That should do the trick.
regards
Siggi

How to display properties of dimension on the input form and report in bpc

Dear Expert,
Please tell me how to display properties of dimension on the input form and report in bpc. I can only display dimension number.
thanks so much
hungth

Hi Hungh,
If your are using BPC 10 with EPM add in client, you can use the function:
EPMDimensionProperty ()
This function retrieves the properties of a specified dimension in a specified cell range.
Thanks, Safa

How to display multi-channel image in the 'proxy'?

There're many examples to show how to display composite channels in the 'proxy'. But I don't find any example to show how to display multi-channel image in the 'proxy'. I found that I can use PSPixelOverlay to display alpha channel data like this:
int nSpotChannel = gChannelCount - 4;
PSPixelOverlay* overlay = new PSPixelOverlay[nSpotChannel];
for(int i = 0; i < nSpotChannel; i++){
 if( i != (nSpotChannel - 1) )
 overlay[i].next = overlay + i + 1;
 else
 overlay[i].next = NULL;
 overlay[i].data = gChannelData + (4 + i) * nPlaneBytes;
 overlay[i].rowBytes = gProxyRect.Width() * gDocDesc->depth / 8;
 overlay[i].colBytes = 1;
 overlay[i].r = 230;
 overlay[i].g = 161;
 overlay[i].b = 174;
 overlay[i].opacity = 255;
 overlay[i].overlayAlgorithm = kStandardAlphaOverlay;
pixels.pixelOverlays = overlay;
Then, Seeing red part, it will trigger a new problem, that is how to get the color value of the alpha channel by plung-in itself? It seems that no channel color value info is in FilterRecord.
If you have other solution, please tell me. Many thanks!

This is what I've been doing - was just curious if there was a way to see a more cohesive image.
If the individual EQ plugins are in fact the answer, is there any way to smooth how the Analyzer displays? The image I posted above, all of the tonal curves are very smooth. The analyzer tool shows a lot of peaks and valleys within the overall curve and it's hard to pinpoint each instrument's "sweet spot." Vocals for example are very hard to spot.
- Morgan

How to display language key (0LANGU) in the query for BW report

Hi,
Can someone tell me how to display language key (0LANGU) in the query? I want to display which language (English or French) is used for material description in BW report. Thx.

hi,
check if the infoobject is kept as lang dependent or not for material text, else you need to create a masterdata attribute with text and lang keys and do corresponding mapping, so then it can be displayed in your report
regards
laksh

How to display my country flag on the task bar in osx mavericks?

How to display my country flag on the task bar in osx mavericks?

System Preferences > Keyboard > Input Sources
Checkmark the box beside "Show Input menu in menu bar".

How to display a message in an audit report?

hello all,
i would like to ask how do display a message in an audit report. here is my code...
CALL TRANSACTION tcode USING i_bdcdata
 MODE c_n
 MESSAGES INTO i_error2.
IF sy-subrc EQ 0.
ENDIF.
CLEAR i_error2.
LOOP AT i_error2.
IF i_error2-msgtyp EQ c_e.
 MOVE v_pernr TO i_bdcerror2-pernr.
 MOVE c_infotype TO i_bdcerror2-infty.
 MOVE 'Error' TO i_bdcerror2-msgtype.
 SELECT SINGLE text
 INTO v_msgtxt
 FROM t100
 WHERE sprsl = i_error2-msgspra
 AND arbgb = i_error2-msgid
 AND msgnr = i_error2-msgnr.
 MOVE v_msgtxt TO i_bdcerror2-msgtxt.
 APPEND i_bdcerror2.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_bdcerror LINES v_bdcerrors.
IF v_bdcerrors <> 0.
SKIP 1.
WRITE: 'BDC Error Report'.
SKIP 1.
WRITE: 'PERNR',
 'INFOTYPE',
 'MESSAGE TYPE',
 'MESSAGE TEXT'.
ULINE.
LOOP AT i_bdcerror.
 WRITE: / i_bdcerror-pernr,
 13 i_bdcerror-infty,
 22 i_bdcerror-msgtype,
 35 i_bdcerror-msgtxt.
ENDLOOP.
ENDIF.
the message text that i was getting contains &1, &2 and so on. how would i be able to replace it with the original value?
thanks!
-ann

After calling the transaction, this is what I do.
a) Call the function module, MESSAGE_TEXT_BUILD and pass the following values from BDCMSGCOLL or the internal table where you collect the messages.
 i) MSGID
ii) MSGNR
iii) MSGV1
iv) MSGV2
 v) MSGV3
vi) MSGV4
There is no need to fetch data using select from table t100.
It builds the message and returns in MESSAGE_TEXT_OUTPUT which can be then displayed to user.
Regards,
Subramanian V.

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

How to display username in RTF BI publisher report?

Please advice how to display username in RTF BI publisher report?
May be this can be done via hidden parameter of BIP report which default value will be set up with macro like {$username$} (or smth like)?
Thanks in advance!

Thanks. That worked. I was trying to get it as part of a multi-table query, aliasing dual. But that doesn't work in SQL Plus either so I guess I can't do that.
I was trying
select o.*, d.:xdo_user_name
from oblix_audit_events o, dual d
Before that I was trying
select
:xdo_user_name as USER_ID,
:xdo_user_roles as USER_ROLES,
:xdo_user_report_oracle_lang as REPORT_LANGUAGE,
:xdo_user_report_locale as REPORT_LOCALE,
:xdo_user_ui_oracle_lang as UI_LANGUAGE,
:xdo_user_ui_locale as UI_LOCALE
from dual
but I must have fat fingered something because that works now too. Thanks.
So if I need to do this in it's own query and I'm using an RTF template, how do I make that work?
If I have to do it with it's own

How to get the spool id or how to create a spool id for the report .

hi,
how to get the spool id or how to create a spool id for the report .
this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
my requirement is to download a pdf file from the alv grid list.

Hi Raghu,
Execute this program.
REPORT ZTEST_3318 .
tables: usr01.
perform send_report_to_spool.
*& Form send_report_to_spool
 text
form send_report_to_spool.
data: loc_dest like pri_params-pdest,
 wf_listname type char12,
 wf_listtext like PRI_PARAMS-PRTXT,
 wf_copies type i,
 wf_days type i,
 wf_PARAMS LIKE PRI_PARAMS, " achieving file PRI_PARAMS.
 wf_valid type c.
clear : wf_listname , loc_dest , wf_listtext .
move: 'AP interface' to wf_listname .
move: 'AP interface' to wf_listtext .
select single spld into usr01-spld from usr01 where bname eq sy-uname .
if sy-subrc eq 0 .
 move: usr01-spld to loc_dest .
endif .
call function 'GET_PRINT_PARAMETERS'
 EXPORTING
 destination = loc_dest
 copies = 1
 list_name = wf_listname
 list_text = wf_listtext
 immediately = ' '
 release = ' '
 new_list_id = 'X'
 expiration = 1
 line_size = 200
 line_count = 65
 layout = 'X_65_200'
 sap_cover_page = 'X'
 receiver = 'SAP*'
 department = ''
 no_dialog = 'X'
 IMPORTING
 out_parameters = wf_params
 valid = wf_valid.
if wf_valid <> space.
 new-page print on parameters wf_params no dialog.
 perform write_summary .
 new-page print off.
endif .
endform. "send_report_to_spool
*& Form write_summary
 text
--> p1 text
<-- p2 text
FORM write_summary .
data: begin of itab occurs 0,
 matnr type matnr,
 end of itab.
select matnr
 from mara
 into table itab
 up to 10 rows.
loop at itab.
write: / itab-matnr.
endloop.
ENDFORM. " write_summary
This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
After that use that spool for your purpose.
If Useful award point

How to display two different hierarchical sequential lists in one o/p scree

Hi Gurus,
I have a requirement for displaying two hierarchical lists in one output screen. I have created my hierarchical sequential lists using
function module : - 'REUSE_ALV_HIERSEQ_LIST_DISPLAY', but i dont know how to append my second hierarchical sequential list
into this.
Will it be easily possible through OO ABAP where i will have two containers at the screen and each container will display one hierarchical sequential list at the output screen. But i have no idea how to do this through OO ABAP.
Please help...
Thanks,
Bhupender

i want to display the records corresponding to the user details enterd
in Text Fields in the same Frame by replacintg the previous display..1) Quit multi-posting.
2) You where given an answer in your last posting on the topic.
3) The code isn't formatted so don't expect us to read the code.

How can I display a formula variable in the report?

Hi,
I have a requirement to display a formula variable value in the report. When the user runs a report this variable value should be called once and displayed below the report title or in a specified cell. Is it possible something like this could be done? if yes, can someone tell me how can I achieve this functionality. I appreciate your time and effort with points.
Thanks,
Rao.

Hi Bhanu,
In the query properties you can only see text variables and not the formula variables. If I define my number of working days as text variable and I can display in the report. However, I need to use this variable in some calculation in the report, so it has to be formula variable in order to use in calculations. I appreciate your input with points.
Thanks,
Rao.

How to Display Mutiple CostCentre Hierarchies in the Report

Similar Messages

Maybe you are looking for