How to display smartforms table lines useing different background colour

Hi all:
How to display smartforms table lines useing different background colour .
for example:
line1:green
line2:red
line3:green
line4:red
line5:green
line6:red
line7:green
line8:red
Any help is highly appreciated!!
启明星

Hi,
Create a two lines one for header and second for data in the table.
1)In table painter we can find the pencil mark.
2)select the pencil mark
3)now select the line which you need to shade
4) now select the shading colour in the table painter and the provide the resolution up to 100% and select table pattrn for that line.
5) Now you can use this for the header now only the header gets shaded and the remaining gets unshaded.
reward points if useful
Thanks and Regards,
Nishant

Similar Messages

How to display smartform table content in condition basis

Hi experts
     In smartform, can i display the content of table in a condition basis.
     For example am displaying 4 rows in a page.
     If the rows exists more than 4, remaining rows i want to display in next page.
     Is it possible, if so, how to do, pls anyone help me on this.
Thanks in advance.
Regards
Rajaram

hi,
use the command which is present in the flowlogic.
In that tick the <b>Go to new page</b> check box and write the page no. into the i/o bos besides it and write the condition whatever it is.
thanks
Dharmishta

How to display multiple tables from database using netbeans swing gui

plz reply asap on how to display multiple tables from database using netbeans swing gui into the same project

Layered Pane with JTables or you can easily to it with a little scripting and HTML.
plzzzzzzzzzzzzzzzzz, do not use SMS speak when posting.

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

How to display a table control in a report

hi
how to display a table control in a report

create a screen in your report.
Call that screen in your report.
While designing your screen, use Table control creation wizard to create table control on that screen.
http://www.planetsap.com/online_pgm_main_page.htm

How to call smartform FM after using SSF_FUNCTION_MODULE_NAME?

Hi Experts,
How to call smartform FM after using SSF_FUNCTION_MODULE_NAME?
I mean, in driver program i called SSF_FUNCTION_MODULE_NAME to get the related FM for my smart form. after that How do I call it(smartform fm) . I tried to call by pressing PATTERN button in Report. but it is showing FM is not exist error.
Call function SSF_FUNCTION_MODULE_NAME
Export
formname = 'zsmartform'
import
fm_name = function_name.
function_name is stored the corresponding smartform fm. then How do i call it to process my smartform?
thanks in advance.

hi,
Chk this sample.
DATA: p_output_options TYPE ssfcompop, "occurs 0 with header line
p_control_parameters TYPE ssfctrlop. "occurs 0 with header line
p_output_options-TDCOPIES = 3. "number of copies.
p_output_options-tddest = 'LP01'. "def
p_control_parameters-no_dialog = 'X'. "no dilog box
p_control_parameters-preview = 'X'. "no preview
DATA : v_form_name TYPE rs38l_fnam.
*---- Function to get the function module name of the    ----
*---- specified Smart form.                              ----
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'GIVE YOUR SMART FORM NAME'
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3 .
*---- Function Module to call the Smart Form          ----
*step 1 - go to ur smart form
*step2 - take environment
*step3-take function module name
*copy that unique number.
*step4 -come back to ur driver program.
*step5 - place ur cursur here. take patter,.give that unique number.
*at that time u will get the below code.
*step6 - rename that unique number with 'v_form_name' in the code generated by pattern.
CALL FUNCTION v_form_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_PARAMETERS =
control_parameters = p_control_parameters
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
output_options = p_output_options
user_settings = ' '
* ARCHIVE_INDEX_TAB =
* IMPORTING
* DOCUMENT_OUTPUT_INFO =
* JOB_OUTPUT_INFO =
* JOB_OUTPUT_OPTIONS =
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
for any clarifiaction pls revert.
regards,
Reshma

How to display all tables residing in my database

i'm using 10g express edition.
i'm developing a .net application using oracle
i want display table infomation in a datagrid
for that i need to select tables fromthe database using the interface given by them
in that i found server name field.....what it actually means?
also how to create a new database in 10g and how to display all tables residing in the database?
pls help me
thanking u
chaitanya

user11359516 wrote:
i want display table infomation in a datagrid
select owner||'.'||table_name owner_table_name
from all_tables
user11359516 wrote:in that i found server name field.....what it actually means?i'm not sute what you mean by server name field? if you refer to table column name see this code below:
select owner||'.'||table_name||'.'||column_name table_column_name,
       decode(data_type,'VARCHAR',data_type||'('||to_char(data_length)||')',
                        'VARCHAR2',data_type||'('||to_char(data_length)||')',
                        'NUMBER',decode(data_scale,0,data_type||'('||to_char(data_precision)||')',
                                                  null,data_type,
                                                  data_type||'('||to_char(data_precision)||','||to_char(data_scale)||')'),
                        data_type) type,
                        nullable
from all_tab_cols
order by table_name, column_id

How to hide system tables when using the Oracle SQL Developer?

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? I didnt find a way to create a separate database using the Oracle Sql Developer. I see all the tables together, and would like to differentiate between different databases.
Can anyone explain to me how to do these things?
Thanks,

Hi,
I would like to know how can I show only the tables that I created under the Tables tree? Your posting is not clear,again tell something more on tables tree,what u want to achieve with it.
How to hide system tables when using the Oracle SQL Developer? if u connected with sys, system or user with dba role then u have a privilege to see these tables,so revoke the privilege/role from ur user to view this tables if ur connected other then sys,system,
I didnt find a way to create a separate database using the Oracle Sql Developer. DBCA is a tool for creating the new database.
Kuljeet

Note:304522.1 How to Move Queue Tables without using export import

Trying to use the pkg available in Metalink "Note:304522.1 How to Move Queue Tables without using export import"
Using the 10.1.0.x and upwards Package, I'm getting the following error on a single consumer queue table with an xmltype payload:
SQL> exec move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK');
BEGIN move_aqt.move('XFORM_TEST_INT','INTERFACE_XML_QUEUE','SMALLBLOCK'); END;
ERROR at line 1:
ORA-20000: ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "SYS.MOVE_AQT", line 652
ORA-06512: at line 1
We've tried in multiple environments, always with the same results.
Trace file shows:
*** 2006-11-08 10:06:47.154
*** SERVICE NAME:(SYS$USERS) 2006-11-08 10:06:47.147
*** SESSION ID:(379.954) 2006-11-08 10:06:47.147
qtable move procedure starting execution at 08-11-2006 10:06:47 for queue table XFORM_TEST_INT.INTERFACE_XML_QUEUE
qtable move procedure experienced an exception at 08-11-2006 10:06:47
qtable move error message ORA-06502: PL/SQL: numeric or value error
qtable move procedure ended execution at 08-11-2006 10:06:47
Can anyone help with this? Has anyone used this before successfully (or not successfully). We urgently need this working today to test moving our queue table into a tablespace with a smaller block size for performance reasons in production.
Thanks for the help!
Tony

Thank you,
Yes we've done that. They've confirmed a problem with the links/scripts on the note. The 10.1 and up version was not really 10.1 and up.
As they would not have a new version available in time for the move we needed to perform, we switched our approach to using dbms_redefinition instead.
Thanks for the reply,
Tony

How to display another window by using Check box

Hi Friends,
I have one doubt in Webdynpro with java. How to display another window by using Check box?
For Exam My requirement is I am getting BAPI from ECC System. So I have to go given input details in first view and output details in Second View. So in Second View I will taken Table that data will displayed in rows. each and every row first check box is available.
Here Select Check Box of particular row then click Edit button. That row data will be displayed in one popup window.
empid, name, sal ,firstname, last Name
empid, name, sal ,firstname, last Name
empid, name, sal ,firstname, last Name
Suppose I have to select check box in First Row Click on EDIT button That row data will be displayed in another popup window here customer will change details depending up requirement click on SAVE Button that update data will saved in ECC System.
How to display another window by using Check box?
Regards
Vijay

Hi Vijay
Your question is not clear enough to give an answer. Do you have some difficulties with the code for opening a popup-window? There are many-many examples in the forum how to open/close a popup.
Or you do not know how to bind the popup opening with clicking a check box? Just put the code in the onSelect event handler of the check box.
BR, Siarhei
Edited by: Siarhei Pisarenka on Mar 11, 2010 10:55 AM

How to create a table to use in webdynpro ABAP

Hi Guys,
Can anybody let me know how to create a table to use in webdynpro ABAP. I am new to ABAP. It would appreciable if i get useful answer. Thanks In Advance
Regards
Ravi

Hi! You can use transaction code SE11. Please refer to http://help.sap.com/saphelp_nw70/helpdata/en/6c/f2934259a5c66ae10000000a155106/frameset.htm
Please note that table name should start with 'Y' or 'Z' - by SAP naming conventions object names starting with 'Y' and 'Z' are reserved for customer application development.
Please reward points if helpful

How to get pivot table by using dates

Hi,
How to get pivot table by using dates in column.
Below is the sample table and its value is given.
create table sample1
Order_DATE       DATE,
order_CODE       NUMBER,
Order_COUNT   NUMBER
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,232);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,935);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,43);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,5713);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,11346);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,368);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,1380);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,133);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,7109);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,14336);
select * from sample1;So how to get the data like below.
          order_date
order_code 30-sep-12 29-sep-12
1 232 368
2 935 1380
3 43 133
4 5713 7109
5 11345 14336

Using the extra data I inserted in my previous reply:select ORDER_CODE,
SUM(DECODE(extract (month from ORDER_DATE),1,ORDER_COUNT,0)) JAN,
SUM(DECODE(extract (month from ORDER_DATE),2,ORDER_COUNT,0)) FEB,
SUM(DECODE(extract (month from ORDER_DATE),3,ORDER_COUNT,0)) MAR,
SUM(DECODE(extract (month from ORDER_DATE),4,ORDER_COUNT,0)) APR,
SUM(DECODE(extract (month from ORDER_DATE),5,ORDER_COUNT,0)) MAY,
SUM(DECODE(extract (month from ORDER_DATE),6,ORDER_COUNT,0)) JUN,
SUM(DECODE(extract (month from ORDER_DATE),7,ORDER_COUNT,0)) JUL,
SUM(DECODE(extract (month from ORDER_DATE),8,ORDER_COUNT,0)) AUG,
SUM(DECODE(extract (month from ORDER_DATE),9,ORDER_COUNT,0)) SEP,
SUM(DECODE(extract (month from ORDER_DATE),10,ORDER_COUNT,0)) OCT,
SUM(DECODE(extract (month from ORDER_DATE),11,ORDER_COUNT,0)) NOV,
SUM(DECODE(extract (month from ORDER_DATE),12,ORDER_COUNT,0)) DEC
from SAMPLE1
where trunc(order_date, 'YY') = trunc(sysdate, 'YY')
group by order_code
order by order_code;
ORDER_CODE JAN FEB MAR APR MAY JUN JUL AUG   SEP   OCT NOV DEC
         1   0   0   0   0   0   0   0   0   600   600   0   0
         2   0   0   0   0   0   0   0   0 2315 2315   0   0
         3   0   0   0   0   0   0   0   0   176   176   0   0
         4   0   0   0   0   0   0   0   0 12822 12822   0   0
         5   0   0   0   0   0   0   0   0 25682 25682   0   0Now a bit of explanation.
1) Whenever you pivot rows to columns, no matter what version of Oracle and no matter what method you use, you have to decide in advance how many columns you are going to have and what the names of the columns are. This is a requirement of the SQL standard.
2) I use the WHERE clause to get just the data for this year
3) With EXTRACT, I get just the month without the year.
4) Using DECODE, I put every month's data into the correct column
5) Once I do all that, I can just GROUP BY order_code while SUMming all the data for each month.

How to display all the surveys using content query web part

Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
however, it returned nothing. Did I miss anything?

Hi,
OOTB Survey List does not contain any
Content Types and it has the following structure:
Response entry is represented by
List Item
Response entry consist of questions and answers, where Question correspond to
Field and Answer to Item value respectively.
For querying Survey List via CQWP the following properties could be used
BaseType
<Lists BaseType="4">
ServerTemplate
<Lists ServerTemplate="102">
Example
To retrieve all the responses from Survey lists, specify List Type property as shown on picture
Reference:
http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to display multi tables side-by-side

Hi All,
I need some help on BI Publisher layout.
I'd like to display two tables side-by-side in one page.
Though I can put the tables correctly in Template Builder,
the tables are joined into one table in generated Report(Preview).
- Template Builder
+[Page1]+---------------------------------------------- +
| |
| [Table1] [Table2] |
| ------------------ ------------------ |
| |EMPNO | |DNAME | |
| ------------------ ------------------ |
| | <EMPNO> | | <DNAME> | |
| ------------------ ------------------ |
| |
- Report Preview
+[Page1]+---------------------------------------------- +
| |
| [Table1] |
| ------------------ |
| |EMPNO | |
| ------------------ |
| | 1234| |
| | 2345| |
| | 3456| |
| | 4567| |
| | :| |
| | :| |
| ------------------ |
| |DNAME | |
| ------------------ |
| | ACCOUNTING| |
| | RESEARCH| |
| | SALES| |
| | OPERATIONS| |
| ------------------ |
| |
Does anyone know how to display two tables side-by-side in the
same page?
Thanks in advance.

Thanks for your quick reply.
I can display side-by-side layout as I had expected!
Thanks.

How to display smartforms table lines useing different background colour

Similar Messages

Maybe you are looking for