How to display some html code in the front panel

Hello.
I am trying to properly display a few lines of html code in some kind of indicator on my front panel.
I was trying to use an ActiveX container with MS IE in it, but all the methods I find are to make it navigate to a given URL. I did not find any method or property by which I could give it some html code and it would display it.
Anybody know of a way to do this? It does not have to be using ActiveX or MS IE.
Thanks in advance,
Alejandro

Here is a simple way using the activeX that I have embedded in some programs in the past. You will have to call the file path to show the file.
Hope this helps some.
-Dave
Attachments:
HTML Window.vi ‏36 KB

Similar Messages

  • How to: display large error note in the front panel?

    hi guys,
    When "error out" has an error, I would like to display HUGE RED TEXT in the FRONT PANEL saying: "STOP, ERROR DETECTED!"  )
    How to do that?
    Thanks for your help.
    Solved!
    Go to Solution.

    Place an indicator on the panel. Set the text to HUGE and RED, and set its value to "STOP, ERROR DETECTED!". Make it not visible. When you get an error, use the "Visible" property node to display it.
    To learn more about LabVIEW it is recommended that you go through the tutorial(s) and look over the material in the NI Developer Zone's Learning Center which provides links to other materials and other tutorials. You can also take the online courses for free.

  • How do you control LED lights on the front panel to identify the number of steps a stepper motor has taken?

    I am controlling a stepper motor that is coupled with a valve with four outlets (using an Arduino).  I've got a general understanding of how to control the motor, but I want LED lights on the front panel to light up that indicate which outlet the valve is currently at after the steps are taken.  The method I'm thinking about involves a lot of repetitive code.  I'm not that experienced with LabVIEW, I'm assuming I need some sort of loop structure but I don't know how to set it up in order to control the sequence of the LEDs.  I've attached my current block diagram for a visual aid if needed.
    Attachments:
    Capture.JPG ‏33 KB

    I was thinking about using the Stepper To Go and Stepper Write functions four separate times, using the same constants for the steps each time since the distance between each outlet is equivalent.  The only difference would be what's connected to the "steps remaining" node, which would be the function that activates one of the four LEDs (if that makes sense).  I was thinking that doing it this way would be a little counterintuitive since the only thing that needs to be changed is the LED indicator.

  • How can I make an area of the front-panel have scroll bars?

    I'm writing a VI that provides many options to the user. The front-panel is large and contains many controls ~130 of them, it's divided up visually to match the workings of the system the VI controls. One particular functional block has very many control options though these are rarely used. I can't fit all of the controls I need onto the screen area I have available.
    What I would like is a way of making an area of the screen with scroll bars on it. I don't need any more than that, just an expansion of the front-panel area I have available. The "Sub-Panel" feature provides the scroll bars. But, a Sub-Panel is a way of accessing another VI, I don't want to do that. I could put the extra controls on the far-left or far-right of everything else and get the user to scroll the main scroll bars at the edges of the screen. The problem with that is that I it would mean couldn't lay out my front panel to match the system block-diagram as I have so far.
    Does anyone know how to do this?
    Solved!
    Go to Solution.

    I know I can show the scroll bars at the edge of the VI. In my case that's not very useful. The front panel shows a block diagram of a system. It's made up of a set of clusters which control various parts of the system. I want to keep this layout because it's very useful in explaining to people new to the system how it works. I inherited that approach from a previous iteration of the program for an older system. The problem I have is that the new system has far more control parameters for one of the blocks. Unfortunately it's one of the blocks in the middle of the block diagram. If it were one at the left, right, top or bottom it would be no problem because the main scrollbars could be used.
    I can use a tab-control, that's my fall-back plan. The problem is that would be abusing the purpose of the tab control. In a tab control each tab is supposed to deal with a group of controls that have a common connection. So, all the things in tab #1 are supposed to be connected in some way and all the things in tab #2 are supposed to be connected in some way. There not supposed to be a way of gaining more screen space.
    The controls I'm dealing with are numeric controls, switches and rings.

  • How do I center and/or maximize the front panel on every event?

    Hi,
    So basically I have a little issue with trying to maximize and then scale back a VI's front panel every time a user selects a different option from a ring control.
    So far i've been using the LVWINUTIL.LLB and the provided window size vi to set the size I want on ring selection change which works fine, but as far as centering the VI goes, the method I'm calling only works the first time. After it maximizes and I select a different option on my ring control which is linked to a case within a while loop it simply resizes to the size i set which is correct but when I got back to the ring case which is supposed to maximize the front panel again, it doesn't do it. Centralizing the FP also only works once.
    I'm  using FP.Run-Time Position.Centered to try and center the VI....only works once. I do understand that this might be the desired behavior since the name is run-time position meaning it'll only do this when the VI is first run, however I need this to happen more then once, how can i do this? Thanks...

    How did you center the FP?
    Their a method that should work time after time.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • How can I view acquired images on the front panel?

    Hi, I would like view captures on the front panel and video images, Is possible to do it? How can I do it?
    Thank's everybody!

    Hi,
    Its pretty simple, go to Edit>Import picture from file (browse for your .jpeg/.bmp/.gif etc file)
    again Edit>Paste
    hope this helps.

  • HOW TO GET OSCILLISCOPE "Screen Capture" ON THE FRONT-PANEL?????

    Hi All,
    I have a lot of parameters displayed on the Tektronix Oscilliscope like the trigger level, the frequrncy,CH1 T/Div and probably many others along with the Waveform(obviuosly!).
    I need to capture this exact oscilloscope screen on the Front Panel.
    Kindly help me out in this!,
    regards,
    Vikram

    Hi Vikram,
    Try this link....
    http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/e4f00cab814727bf862568ab005fbc2c?OpenDocument
    This one has the driver for your "Tektronix 2440 Oscilloscope" and the oscilloscope can be hooked up to the computer via the GPIB port. THe details are given in the link....
    If the link does not work I have attatched the drivers.....
    Good Luck.
    -Parikshit.
    Attachments:
    tk2440_5x.zip ‏170 KB
    tk24406x.zip ‏138 KB

  • How to/Is it possible to get the front panel's VI icon?

    Hi
    I want a sub-vi to get the front panel's VI icon image of other VI,
    example, the subVI can have the image return based on VI refnum, is
    there any function to do this?  I try to search the "Application
    Control ->  Property Node" and could not find any of it.
    Thank for any suggestion.

    This method also exists in 7.0
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • How do I print a part of the front panel?

    I am interested in printing a part of my front panel as one page instead of printing the entire front panel. Does anyone know if this is possible? Thanks!

    Hi Nes,
    This is the second time you are posting a variation on this question.
    I was about to so NO YOU CAN'T...
    but then I thought...
    It is possible to print just parts of a front panel but it is a lot easier to do the things others have suggested.
    If you really want to print just a part of the FP you will have to do a lot of coding and the GUI will do some strange things in the process.
    I will outline the process and leave the code as an exercise for the reader.
    Using property nodes determine where on the FP the objects of interest are located.
    Again using property nodes, move the objects around on the FP so that they are grouped together and sized such they fit on a printed page.
    Using property nodes adjust the screen size origin etc so only
    the objects of interest are now visable.
    Using.....nodes print only the visable part of the screen.
    Using....nodes put everything back where is was when you started!
    Like I said, this is not easy.
    The simplest solution was suggested by BJD who said group the objects of interest on a tab page, use an invoke node to get the image and then display it on the FP of a sub-VI set to print on completion. That method will let you quickly add new interesting objects to the print out without having to change the sub-VI.
    Trying to help,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How to send 20 individual pictures to the front panel ?

    Hi LabVIEW experts!
    I have a lung simulator which I connected to the Ni 9205 and could read voltage from. I wrote the program and it works well. I want to use this program for taking an exam of some trainees. Now I have a problem. I need the trainees to look at the graphs and when they want additonal information by pressing a button, a picture of an xray or lab data related to that patient shows on their monitor. Case by case is different. I have for example 20 lab data from different patients with their xrays. How can I control the trainee program to send a picture which is related to that patient?
    Thanks. 

    Yes.
    You just need to have your LabVIEW code programmed to do that.  You can convert the picture data to a stream of bytes (look at typecast or flatten to string) on the sender.  Use TCP/IP functions to send the data over the network.
    The receiver will do the reverse (typecast back to an image, or unflatten from string) and send it to the picture indicator.
    Look at the functions
    I would recommend looking at the online LabVIEW tutorials
    LabVIEW Introduction Course - Three Hours
    LabVIEW Introduction Course - Six Hours

  • How do I programmatically display jpeg files on the front panel

    Hi,
    I would like to be able to programmatically display various jpeg images on the front panel of a VI. I would mostly like to be able to display one image at a time and have the ability to programmatically change the image to different ones under program control. I found a picture indicator but not sure how to use if or if this is the best way. Thanks for any help.
    Dave Adams

    Yes, you can use a picture indicator.
    The attached simple codelet shows how to display a jpeg image on it (Make sure the image indicator is big enough).
    Let us know if you need help with the rest of the coding.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    DrawJpeg.gif ‏2 KB

  • How can I simultaneously acquire and display an image on the front panel using a PCI-1408

    I have to acquire and display an image directely in the front panel of a *.vi using a PCI-1408. i have to know all informmations about this image because I want to create a calibration system.

    Hi Paola,
    if you own IMAQ Vision you can just have a look at the examples that comes with your board or you can look at: http://zone.ni.com/devzone/explprog.nsf/6c163603265406328625682a006ed37d/2abaefe05789961686256866007c0d22?OpenDocument.
    Without IMAQ Vision look at:
    http://zone.ni.com/devzone/explprog.nsf/6c163603265406328625682a006ed37d/22474456534202b086256aff005fc4f3
    (or search at ni.com for "IMAQ Display without IMAQ Vison)
    Please mail me if you need further help,
    Michael

  • How to make non-visibl​e Control on Front Panel Appear at Design Time?

    I have some Controls on the Front Panel whose visibility is changed (turned on or off) at Run Time. The problem is that if I stop the Run time, the Visibility of the Control remains in the runtime state in Design mode. So I may not be able to see or find the Control to make changes in Deisgn mode.
    How can I make all Controls on the Front Panel visible, or find and make visible a Control on the Front Panel whose Visibility has been made False?
    THANKS.
    Solved!
    Go to Solution.

    This is documented in the LabVIEW Help.
    Displaying Hidden Front Panel Objects
    Complete the following steps to display a hidden front panel control or indicator. You also can hide front panel controls and indicators.
    Find the block diagram terminal for the object. If you have several terminals with the same data type, right-click the terminals and select Visible Items»Label from the shortcut menu. Find the object with the label that matches the hidden front panel object.
    Right-click the terminal and select Show Control from the shortcut menu if the object is a control or Show Indicator if the object is an indicator.
    You also can use the Visible property to display controls and indicators programmatically.
    You also can display all hidden front panel controls and indicators.
    Path: Fundamentals -> Building the Front Panel -> How-To -> Configuring Front Panel Objects -> Displaying Hidden Front Panel Objects.

  • I embedded some HTML code into adobe Muse but not displaying when the pages are Exporting to HTML

    I embedded some HTML code into adobe Muse and when I published the remote site on business catalyst the (Add This widget) HTML code shows up but when I exported the site to HTML pages and view the index page in the browser (Safari, Chrome, Firefox) the (Add this widget) HTML code wouldn't display on any of the pages. I've used this code before on other Muse sites not sure what could have happened. Thnx!!!

    Hi,
    Please take a look at this post for a similar discussion : Re: When i export my muse website my youtube video links stop working. Why is this?
    Regards,
    Aish

  • I want to skip some html code part when refersh the page, how can we know

    Hi,
    i want to skip some html code part when refersh the page, how can we know when we pressed refresh button or F5 key
    thanks in advance....

    There's not really any simple way to do this. Maybe tracking the page the user should be one from every page in the site and if the page being accessed is the same as the last one accessed, assume it was a refresh.

Maybe you are looking for