How to display special characters in Script...
hi all,
Can any one tell me how to display special characters in script...
how to write in text element
thanks in advance,
prashant
Hi Prashant ,
What special characters would you like to include .
There are a set of characters / icons /symbols that can be included in Script , for that open a window in edit mode and in the menu there will be an option called Insert , here you can find a lot of characters/symbols that can be included .
Regards,
Arun
Similar Messages
-
How to display special characters in APEX Classic Report column
Ref: Thread: How to display newline characters as new lines
Version: APEX 3.2
Hi,
I have created an classic SQL Report with one of the columns being a decode that gives a value 'Post'(the value should be highlighted in Red) on one condition and 'Pre' on another. I have followed the advice given in the page (URL provided above) , i.e. I have changed Strip HTML to 'No', changed Display as to 'Display as text (escape special characters, does not save state)'. I have also passed this value back to the same page to be stored in a page item each time a link (another column in report) in report is clicked. I have tried passing it as #DEADLINE# and \#DEADLINE#\. The issue I face is, instead of the value being highlighted in Red, it gets passed back as a string holding the value 'Post'. Is there any way I can get this to display as it should without the Strip HTML being changed to 'Yes'.
Thanks very much.
Rohi
Edited by: Rohi on 18-Jul-2012 04:21876651 wrote:
Hi,
Thanks for your response.
I am trying to display a page item that is derived from a report column based on a click on the URL link (*view >*>)
This page item (here, it is Manager_ID) should ideally be highlighted when a particular condition is satisfied (achieved using a DECODE in the report).
But it is not displayed like it should be.
I do not want the value to be displayed along with the html tags as a string.
I want the html tags to take effect and highlight the value within it.
Initially, I had set Strip HTML to Yes and the value was returned without any highlighting .
So I changed it to 'No' and and it contained the html tags.
I am not sure what setting in APEX Report Attributes can help me achieve that effect I want.None of the report settings are relevant. They affect the rendering of the report and none of the columns you were changing the properties of were actually rendered.
You can't pass HTML and CSS around in URL parameters.
I suggest you pass *2* values in the column link: the MGR ID and a simple class or colour value computed by the DECODE in the report. I've suppressed the first version of the report and created a new one that does this:
decode(dept.deptno, '30', 'c00', '000') highlight The link column now passes the MGR ID and the HIGHLIGHT colour (red when the condition is satisfied and black when it is not).
I created another hidden and protected page item <tt>P0_HIGHLIGHT</tt> as the target for the highlight value, and used the Pre/Post Element Text properties of the <tt>P0_G_MGR</tt> to wrap it in a <tt>span</tt> whose colour is changed using the <tt>P0_HIGHLIGHT</tt> value as a subtitution string:
<span style="color: #&P0_HIGHLIGHT.;">Having done that, I still don't really get the requirement here. I'm sure that given the full picture I'd be using a completely different approach... -
How To: Display Special Characters, Not Boxes?
Okay, here's a question. I searched the FAQs, the support pages, and used the search forum option and came up with nothing, so here I am.
I have CDs that are from other countries, namely Japan. The bands names and song titles are written in Kanji (the symbols rather than letters written out).
When I import the songs to iTunes, the kanji characters show up as little squares instead of the actual characters.
However, when I copy the song title or band name and then paste into a messenger window or Word or a browser search bar, it shows up just fine.
To me, this says the information is still there, just not displaying correctly in iTunes. And since I can see it in other applications, my computer can obviously read the character set.
As it stands right now, and in past releases of iTunes, I have to decide which "four square" song is the song I wish to listen to. (When there are 20 "four square" songs by the same "two square" artist, all roughly 3 minutes in length, it gets a bit difficult to figure out which song is the one you're wanting.)
Side note - On my iPod, it doesn't show up as boxes, but rather as funky symbols that are not in any way kanji. Like an A with a degrees sign over the top of it and various $%*# symbols instead of the Kanji.
So, the question is, is there a solution to this or at least somewhere I can enter the question as an "I need support" question?
I found places to report everything under the sun except for iTunes or the iTunes store. Very... disturbing...
Thank you for your time and I hope someone at least has a suggestion!
~Dark Avenger
Dell Inspiron 5100 - Windows XPHave a look at Tom Gewecke's User Tip and see if it contains a solution to your problem.
-
How to display special characteds in OBIEE reports?
How to display special characters/multi lingual characters in OBIEE reports? Could you please let me know were all I need to make the changes in OBI so as to see the similar set of characters that being saved in database.
Thanks in advance
Regards,
Jeetender
Edited by: user9353498 on Mar 17, 2010 3:55 AMHi,
I believe it depends on your database type. If your database query supports it, OBIEE should not have any problem.
I think there are only 2 constraints which might stop OBIEE from displaying special characters.
1) OBIEE internal javascript which does not allow special characters
2) Database type which does not allow special characters in query.
If you can take care of these 2 reasons, then it should be possible.
However, experts can shed some more light on it.
-Vinay -
Hi,
i'm displaying usernames in our application, but i'm not sure
how to display
special characters correctly.
When using the labels htmltext property, it only recognized
html style tags, but
no html encoded special character like ü for the
german character ü.
The encode string is simply displayed literally: ü
Anyone knows how to display those special characters
correctly ?Try one of the NSString "stringByReplacingPercentEscapesUsingEncoding" methods.
-
I would like to translate the User Interface of my application to French, Italian, Spanish, German and Portuguese.
When I put special characters in the import string file they showed up as ? (question mark)
The import strings file includes the following parameters for each string: font, text, size and style. (but no field for script)
In order to use a unicode font such as Arial I need to select a french script. But this option is not supported bu LabView (As far as I saw)
A) Is there a font which is directly German/ French etc and not regula font + script parameter?
B) Are there another required step
s for special characters support? (When I put speciual characters in the import string file the showed up as ? question mark)This was discussed last week in this group- read the previous messages.
Look for the thread "Foreign Languages in Labview"
And recite the mantra
ActiveX is good
ActiveX is holy
All Hail Bill
Those who claim otherwise are heretics and not to be trusted
Actually, in this case the non-ActiveX suggestions may be good.
talia wrote in message
news:[email protected]..
> How can I display special characters of NonEuropean languages (French,
> Italian, Spanish, German and Portuguese.) using import string
> mechanism -
How to print Special Characters in Sap-Scripts
How to print Special Characters in Sap-Scripts
Thanks,
RaviHi
if u want print special characters we can use hot codes i.e ' ' (single inverted commas). in between these hot codes insert u r special characters.
write ' !@#$%^&*( ) '.
for the above write statement output is
output is !@#$%^&*( ) -
[Solved] TTY doesn't display special characters correctly
Hello everyone.
I want to set my system language to german. I followed this tutorial: https://wiki.archlinux.de/title/Arch_Li … .BCber_HAL
Everything works good except that my TTY can't display special characters. Example:
http://i.imgur.com/ZW6kbOS.png
The is " not showing correctly at the bottom. However, the german umlaut ä works (as you can see).
I have already searched the arch forum. The only thing i have found is setting DAEMON_LOCALE="yes" in rc.conf. However, these post are already quite old and don't solve the my problem (as öäü are working). Additionally, Arch has stopped using rc.conf.
So, what causes this problem and how can i solve it?
Here are my configs:
/etc/locale.conf
LANG=de_DE.UTF-8
LC=
locale -a
C
de_DE.utf8
en_US.utf8
POSIC
locale
LANG=de_DE.UTF-8
LC_CTYPE="de_DE.UTF-8"
LC_NUMERIC="de_DE.UTF-8"
LC_TIME="de_DE.UTF-8"
LC_COLLATE="de_DE.UTF-8"
LC_MONETARY="de_DE.UTF-8"
LC_MESSAGES="de_DE.UTF-8"
LC_PAPER="de_DE.UTF-8"
LC_NAME="de_DE.UTF-8"
LC_ADDRESS="de_DE.UTF-8"
LC_TELEPHONE="de_DE.UTF-8"
LC_MEASUREMENT="de_DE.UTF-8"
LC_IDENTIFICATION="de_DE.UTF-8"
LC_ALL=
/etc/vconsole.conf
KEYMAP=de-latin1-nodeadkeys
Note that i am running Arch as guest in a VirtualBox.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
Last edited by Oznerol256 (2013-11-01 09:49:08)I'm pretty sure you have to specify font and font map in vconsole.conf
like so:
FONT=Lat2-Terminus16
FONT_MAP=8859-2
If that doesn't help it could be this.
If so try to load settings manually, I can't test German setup, but for Polish I could do this to get national characters:
loadkeys pl
setfont Lat2-Terminus16 -m 8859-2
that requires to be root/sudo
note that -m 8859-2 part is quite important
edit:
actually got all German symbols to be displayed correctly, though I do not know if they are assigned for right keys for obvious reasons
loadkeys de-latin1-nodeadkeys
setfont Lat2-Terminus16 -m 8859-2
read read topic in then link to hopefuly fix why settings are not loaded on boot
Last edited by nutsh (2013-10-31 02:47:48) -
Displaying special characters in ALV report.
Hi Experts,
Can we display special characters in ALV reports? Special characters such as tick mark.(Like in character map(Font Bookshelf Symbol 7) of windows ).
I tried with icons in ALV report, I was able to display tick icon in the ALV report, but when we export the report in to a excel, the icons comes in as Hexadecimal code.
Can any we display special characters like tick in ALV report or display the icons in excel aswell?
I will be gratefull for the <urgency reduced by moderator> response.
Regards,
Sharath.
Edited by: Thomas Zloch on May 10, 2011 10:26 AMSharath,
I think it is possible to do so.
Please check this link.
http://www.sapfans.com/forums/viewtopic.php?f=13&t=322569
Thanks,
Guru. -
How to write special characters in PDF using iText
How to write special characters encoded with UTF-8 in PDF using iText.
Regards,
Pandharinath.I don't know what your problem is but that's almost certainly the wrong question to ask about it. Java (including iText) uses only Unicode characters. (You may consider some of them to be "special" if you like but Unicode doesn't.) And when it does that, they aren't encoded in UTF-8 or any other encoding.
So can you describe your problem? That question doesn't make sense. -
Display special characters in Workbook / BEx-Query
Hello,
Actually we have the problem to display special characters of the customer number-descriptions in workbooks / BEx-Queries. In the text-table of 0CUST_SALES (/BI0/TCUST_SALES) we can see the special characters in the descriptions for example for Polish names (here: OBI WROCŁAW). But in the reports the special character "Ł" is replaced by "#".
The InfoObjekt is marked as non-language dependent.
In the backend we are already working with BI 7.0. At the front-end-side we are still using the 3.x-toolkit.
Does anybody have an idea?
Kind regards
DanielI had this problem with Thai characters.
You need to have a Windows configured with polish chars to see them, I fear. -
[SOLVED] urxvt does not display special characters
Okay so I've been scouring the internet, Googling my face off. I am an intermediate linux user, first-time Arch user (just came over from Mint and love it). Perhaps I'm missing something obvious, but I am unable to get urxvt to display special characters. E.g.:
☽
☾
♊
⚕
⚛
⚚
displays in the terminal as:
Relevant informations...
.Xresources:
!color0 (black) = Black
!color1 (red) = Red3
!color2 (green) = Green3
!color3 (yellow) = Yellow3
!color4 (blue) = Blue3
!color5 (magenta) = Magenta3
!color6 (cyan) = Cyan3
!color7 (white) = AntiqueWhite
!color8 (bright black) = Grey25
!color9 (bright red) = Red
!color10 (bright green) = Green
!color11 (bright yellow) = Yellow
!color12 (bright blue) = Blue
!color13 (bright magenta) = Magenta
!color14 (bright cyan) = Cyan
!color15 (bright white) = White
!foreground = Black
!background = White
!URxvt*termName: rxvt-256color
URxvt*termName: rxvt-unicode
URxvt*transparent: true
URxvt*depth: 32
URxvt*shading: 70
URxvt*saveLines: 12000
URxvt*foreground: #BABABA
URxvt.font: xft:terminus:pixelsize=11:antialias=false
URxvt*scrollBar: false
URxvt*borderLess: false
URxvt*inheritPixmap: true
URxvt.urlLauncher: google-chrome
URxvt.imLocale: en_US.utf8
URxvt*color0: #000000
URxvt*color4: #005577
URxvt*color6: #89b6e2
URxvt*color7: #cccccc
URxvt*color8: #555753
URxvt*color12: #0075A3
URxvt*color14: #46a4ff
URxvt*color15: #ffffff
Output of locale and locale -a:
[dusty] [~]
$ locale
LANG=C
LC_CTYPE="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_COLLATE="C"
LC_MONETARY="C"
LC_MESSAGES="C"
LC_PAPER="C"
LC_NAME="C"
LC_ADDRESS="C"
LC_TELEPHONE="C"
LC_MEASUREMENT="C"
LC_IDENTIFICATION="C"
LC_ALL=
[dusty] [~]
$ locale -a
C
POSIX
en_US.utf8
I don't believe it's a font issue, as those characters display fine in a text editor using Terminus.
Last edited by rollhax (2012-09-23 01:04:16)Nisstyre56 wrote:Did you install "rxvt-unicode" or just "rxvt"? I'm sorry, but I have to ask
Yes
stlarch wrote:Check the wiki page for locale.
Read over it ten times. The only thing that looks remotely helpful is the section on "My terminal doesn't support UTF-8" ... it then tells me to use rxvt-unicode, which I am using. Feel free to point out something that may be obvious to you. I'm pretty oblivious at times. -
Can Apple TV display special characters in movie chapter names?
I have an Apple TV 2.0.1. I have encoded my own movies with descriptive chapter names, imported them into iTunes 7.6.2.9, and synced them to my Apple TV. Does the Apple TV have the ability to display special characters (ó, û, etc.) in movie chapter names? The movies play fine and in iTunes the chapter names are all displayed correctly. I also have an iPod Touch 1.1.4 and it can display the chapter names with special characters fine as well. When playing the movies on Apple TV, only the chapters that have special characters in them display nothing at all for the chapter name. All the other chapters display fine.
Welcome to the Discussion Forums.
I can't really confirm your observation one way or the other, I don't use chapter names. I suspect though that your observations are correct. Unusual characters can often cause issues in a variety of ways, illegal characters in your filenames for example can cause the video not to be found at all or in some cases simply not play. If you are using ie instead of safari for example the in my welcome my well not display properly whereas others will clearly see it as an apple symbol. -
Re:How to display Japanese Characters
Dear all
Does any one has idea how to display Japanese characters in PDF output generated by the Reports6i.
Reports in Discoverer are working fine but when it comes to pdf the Japanese Characters are lost.Hi Rohit
Thanks for prompt reply.
1) Suppose if we upgrade the Report6i By applying the Latest patch.
2)Then Develop the reports in 9i editor and run it on live enviornment which is Oracle9iAs (Application server)
, Reports6i server(patch 14) will it still loss the effects/Can cause problems Later on.
Thanks
Jai -
When i hold down a key instead of repeating it displays special characters
When i hold down a key instead of repeating it displays special characters, can anyone helpma resolve this issue, or is it something i cannot change?
False gets replaced by True
In terminal copy and paste:
defaults write -g ApplePressAndHoldEnabled -bool true
Restart your Mac
Maybe you are looking for
-
i activated my brothers iphone under my apple id now all his imessages come to my phone aswell how do i remove his number from my apple id
-
How can I get/set the vaule of a varibale in the planning function
Hi All, in the fox I can get the value of a variable using VAR(), but How can I get/set it in a normal planning function? any proposal would be very appreciated.
-
LDAP Error during provisiong a user to AD
Hi, We are trying to provision a user to AD.But create user task is failing.The status is provisioning. We are getting the following error in the application logs.Please help us. ERROR,19 Aug 2011 11:52:43,811,[XL_INTG.ACTIVEDIRECTORY],Problem creati
-
Function Module for clearing customer open line items?
Hi, Can anyone suggest me, the FM for clearing the customer open line items/ Manually we can do by f-32.....but, i need an FM for this? Thanks in Advance, Manju.
-
Where's The Activity Window in Safari 6?
?