How to do a silent install of NI-DAQ 7.3.1?

I want to do a minimal silent install of NI-DAQ 7.3.1. I have found a few references, but none seem quite to provide all the information I need. Summary of my reasearch so far:
In these two threads (thread 1, thread 2) a user asks the same question as me, but for some reason the NI Applications Engineer just stops responding to the users' questions, although he does provide some information.
How to do install only particular features to install is specified for pre-6.9.0 in this knowledgebase entry, and this text file shows which components that are needed for specific features, but still only for pre-6.9.0.
Another knowledgebase entry explains how to specify individual components for 6.9.3 and up, but lacks information on which components (msi installers) that are needed for specific features.
Also this knowledgebase entry, which describes how to initiate the DAQ installer after your own installer, is very helpful.
In summary, I need information similar to that provided in the text file mentioned above on which parts of the full NI-DAQ 7.3.1 installation that are needed to install "just the NI-DAQ drivers" or "the NI-DAQ drivers and LabView 6.1 support files" etc.
Martin

Hello MartinManscher
The KB entry you mentioned shows three different specfiles. Try to scroll through the one for NI-DAQ 7.2 where each feature is explained in more details.
You have not mentioned if you are installing traditional DAQ or DAQmx?!
You should just install the root for the DAQ driver and then the support for the LAbVIEW version and the root for MAX...
Hope this helps you.
Regards
Mohadjer

Similar Messages

How to create a silent install without firstlaunch and autoupdate enabled

Its been asked numerous times but I cant find an answer in these forums or via search. I want to create an admin install for Blackberry Desktop Manager 7.1. RIM publishes a guide for creating a silent install but not a useful guide for turning off the autoupdate feature. Their answer, basically, is to regedit the HKCU keys to disable autupdate. However, These keys do not exist until after the user logins and runs the desktop manager for the first time.
How can these keys be incorporated during the initial install? I attempted to create an MST with orca however, contrary to to RIM's silent install guide you can't run the msi directly, rather you have to use the setup.exe to kick off the msi.
Has anyone had any luck creating the mst? What lines in the msi do you edit to create the mst? And finally, how do you run the install with the mst in command line?
Considering that the largest user base for blackberries are enterprise environments RIM really needs to make a more admin friendly install with proper documentation. While our hate does make us stronger, **bleep** off the IT crowd will only further fuels the push to other devices.

The steps you followd seem right, the only thing however that is missing is when you add the channel with provider class name. The channel gets added only for the domain, it does not automatically perculate to all roles and users below if the user has customized his settings. You would have to enable the option Apply changes to all roles and sub roles for the user to inherit this, however if you have made any specific changes for the user that will get over written by the domain values when you select the option apply changes to all roles and sub roles.

Silent install in the enterprise

Hi.
Please can you let me know if there has been any update on how to perform a silent install for Adobe Digital Editions. I specifically want to automate the activation process for multiple users by selecting the do not authorise option automatically so the install completes without any user interaction.
Thanks

Thanks "Frustrated AZ", that 'contradiction' does make sense although it does slightly leave us business users out in the cold. My challenge is that the UK's largest legal services provider has chosen eBooks instead of PDF's, and is recommending ADE to their business clients.
"mrt11011", I see now what you meant (missed it in your earlier post) and I have also hit the proverbial brick wall. I have not been able to find a way to suppress the activate screens, and having suppressed the EULA is not much of a consolation. I was able to automate it completely using Winbatch (a fantastic Windows admin scripting / tool), using keystrokes but was forced to use "mouse clicks" because the activate wizard doesn't support keyboard shortcuts. I digress... Unfortunately I cannot (yet) accomodate different screen resolutions because it's Flash and the operating system isn't clearly identifying the child and parent windows to Winbatch. If I crack it I will certainly post my solution here.
Hopefully Adobe's wizards will scroll through these posts and do something for businesses.

Syntax for Illustrator update silent install

I have 13.0.1 and 13.0.2 updates and tried /? /help /s /qn /r /f1 ... and none of them work to kick a silent install or generate a install script. Can someone tell me how to allow for silent install of these updates?
We would like to deploy these via our software delivery application
KT

I know this post is a few months old, but for those that still need the info:
Updating Adobe Acrobat Professional from 9.0.0 to 9.1.2
1. Download the 2 patches, AcroProStdUpd910_T1T2_incr.msp (this updates to 9.1.0) and AcrobatUpd912_all_incr.msp (this updates to 9.1.2) and place them in the same folder.
If you are already at 9.1, you don't need the first patch.
2. Copy the AcroPro.msi file from C:\Program Files\Adobe\Acrobat 9.0\Setup Files\guid (I didn't feel like typing out the whole string) to the folder with the patches. This is where the setup placed this file for my installation of CS4; your location could be in a different spot.
3. Create your script with the following 2 lines:
msiexec /p "%installdir%\AcroProStdUpd910_T1T2_incr.msp" /qn /norestart REINSTALL=ALL REINSTALLMODE=omus
msiexec /p "%installdir%\AcrobatUpd912_all_incr.msp" /qn /norestart REINSTALL=ALL REINSTALLMODE=omus
Substitute your path to the folder with the patch files for %installdir% above.
Obviously, this procedure is for updating Windows only. This was only tested on Windows XPSP3 with Adobe Acrobat Professional 9.0.0 as installed as part of CS4 Master Collection.

Silent install framemaker 12

Hi, I'm trying to discover how to setup a Silent install for Framemaker 12. It doesn't appear as if the AAMEE works with Framemaker, as it only works for the Creative Suite apps; is there a similar customizable installer for the Technical Communication Suite apps? I will be deploying Framemaker as a packaged install via SCCM, so I need to be able to silently install it without the endusers having to input the license key or activate it.
Any assistance would be greatly appreciated.
Thanks!

Ask in the FM forum.
Mylenium

Adobe Acrobat Connect plugin silent install

Does anyone know how to do a silent install from the setup.exe? The closest I could get was by running setup.exe /silent, but the progress bar still popped up, although it skipped the first screen where you click next.

If you download the add-in installer named setup.exe, and you do a right-click -> properties -> version, you will see in the Comments that it is an Innosetup file.
Going to www.innosetup.com, you can click on "Documentation", then "Other Information", then "Setup Command Line Parameters".
There you will find that the Command Line parameters to do a silent installation are:
/SP-
Disables the This will install... Do you wish to continue? prompt at the beginning of Setup. Of course, this will have no effect if the DisableStartupPrompt [Setup] section directive was set to yes.
/SILENT, /VERYSILENT
Instructs Setup to be silent or very silent. When Setup is silent the wizard and the background window are not displayed but the installation progress window is. When a setup is very silent this installation progress window is not displayed. Everything else is normal so for example error messages during installation are displayed and the startup prompt is (if you haven't disabled it with DisableStartupPrompt or the '/SP-' command line option explained above).

Adobe Dreamweaver CS3 Silent Install

I have followed adobe's instructions on how to perform a
silent install with the preserialization built in to the silent
install. I recieve an exit code 6 when trying to use the
Application Override file that Adobe has provided. Any
suggestions?

Mike.Yates wrote:
> I contacted Adobe support and the guy asked me to post
on the forum because
> they dont "really support silent install". He stated
that the developers check
> the forums quiet often and they might be able to assist.
Hmm. That sounds a rather lame response. Not your fault, of
course, but
if Adobe gives instructions for silent install, their
technical support
people should be able to provide you with assistance. I'll
try to draw
this to someone's attention to see if you can get an answer.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Flash Builder 4.7 Silent Install

Hi We have bought a site licence for CS6 but we cannot get Flash Builder 4.5 to work so we have a licence for Flash Builder 4.7 so I have downloaded that.
Please can someone tell me how to do a silent install of Flash Builder 4.7 or how to package it up using the Adobe Aplication Manager
Please advise
regards
Simon

permissions are wide open.
my hunch is that it is a misleading error message. the download manager fails every time near the end saying 'content invalid' and provides a link to download directly. when i download via this link, the download always hangs indefinitely at the end unless i pause and resume... so perhaps the file is corrupt.
i have tried the 64 bit and non-64 bit versions. the non-64 bit version of the installer downloaded directly refuses to run at all.

Silent install adobe photoshop element 10 for mac

how do I do silent install adobe photoshop element 10 ?
I did follow this guide but no luck
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s.html
- I have dvd installer for mac
- I have 120 user licences
- I download AAMEE 2.1
here the error :
this media is not supported by this version of AAMEE
try using AAMEE 3.1 but same problem
please help
thanks

Hi,
Please follow the mentioned steps:
1. Download AAMEE 2.1 and install it on your machine.
2. Download Photoshop Elements on your machine or if you have a DVD insert DVD
3. Launch AAMEE 2.1 and create a package.
Please refer the connect recording link showing the path to access in attempt to create package: https://my.adobeconnect.com/p4q65w6yno5/ .
Regards,
Romit Sinha

Silent install for Audition CS5.5

Can someone please tell me how to do a silent install of Audition CS5.5 or point me to the document?

This document should be a good starting point:
http://kb2.adobe.com/cps/829/cpsid_82946.html

Labview 2010 SP1 silent install

Hello,
I have a student version of Labview 2010 SP1. I have located an article on how to perform a silent install using v2008 (http://digital.ni.com/public.nsf/allkb/AA2371E815A418DD86257169005F2D99?OpenDocument). I was wondering if anyone had a 'spec file' or silent install file for 2010 SP1? If not has anyone tried creating a .MSI using WinInstall?
We are trying to push it out using Group policy to one of our small teaching labs. I was going to create a startup batch to accomplish this.
Thank you
ZoeTaite

OK...after some reading I see you can generate a 'spec file' that will help with the silent installation of the Labview 2010 SP1 software via group policy. Is there a way to to modify the nisuite.xml to automatically register the software? Like I mentioned we are pusing this out to a student lab and I don't want to provide the SN (even though it comes up when you launch it).
ZT

Silent install of SQL Server 2008r2 for ALL users?

We ship an installer that does a silent install of SQL Server 2008r2 with all the 'right' parameters pre-configured. We use this:
/QS /INSTANCENAME=MSSQLSERVER /ACTION=Install /FEATURES=SQL,BC,Conn,ADV_SSMS /SAPWD=MyPasswordGoesHere /SECURITYMODE=SQL /TCPENABLED=1 /ADDCURRENTUSERASSQLADMIN /SQLSVCSTARTUPTYPE=Automatic /SQLSVCACCOUNT="NT AUTHORITY\SYSTEM" /AGTSVCACCOUNT="NT
AUTHORITY\SYSTEM" /IACCEPTSQLSERVERLICENSETERMS
However, the problem is that if a tech installs it for another user, that user does not have access, since ADDCURRENTUSERASSQLADMIN flag only adds the user who installed it -- rather than adding ALL users on the computer. (Or at least all admins.)
I tried replacing ADDCURRENTUSERASSQLADMIN with this:
/SQLSYSADMINACCOUNTS="BUILTIN\ADMINISTRATORS"
but that also failed to work. How can we install for all users, or at least all administrators?
NOTE: we do NOT know the name of the computer or the users. The installer has to work for any computer setup.
Similar question has already been asked, but wasn't helpful:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8354675f-be9b-4909-b776-942f03954807/how-to-do-a-silent-install-of-sql-2010-express-for-all-users-on-a-computer?forum=sqlexpress
The documentation does not make it clear what you can pass as allowed SQLSYSADMINACCOUNTS parameters. I also am not sure if I would need to change the AGTSVCACCOUNT or SQLSVCACCOUNT?

I tried one more thing:
/SQLSYSADMINACCOUNTS="BUILTIN\Administrators"
which does not halt installation with an error.
However, doing:
osql -E
create database test
go
in a command prompt from a different admin user on the same machine results in a permissions error... but works if done from a command prompt on the user account from which MSSQLServer was installed.
So for some reason /SQLSYSADMINACCOUNTS="BUILTIN\Administrators" does not work as expected.
Anyone have any idea why?
I checked the output log from the install, and found it had generated and used a configurationFIle to do the install. I looked in that file, and these were the settings, even though I did NOT pass /ADDCURRENTUSERASSQLADMIN as a command line option:
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS="BUILTIN\Administrators"
; The default is Windows Authentication. Use "SQL" for Mixed Mode Authentication.
SECURITYMODE="SQL"
; Provision current user as a Database Engine system administrator for SQL Server 2008 R2 Express.
ADDCURRENTUSERASSQLADMIN="True"

Silent install Premiere Elements 10, 32 and 64-bit

I found the article on how to do a silent install of Premiere Elements 10 at http://helpx.adobe.com/premiere-elements/kb/silent-install-instructions-premiere-elements- 4.html
My question is how do I combine the 32 and 64-install files, or do I? I have an x86 folder for the 32bit, and x64 for the 64bit versions of Premiere Elements. Each has a PRE 10 and ReadMe folders. Can I combine these folders together, so both 32 and 64-bit versions are all in one PRE 10 folder? It would appear that some files would be overwritten, although most appear to be identical, so not sure how important that is.
Also, can you clarify the setup and location of the optional content folder. I have a folder called "PRE 10 Content" that has several subfolders such as "Adobe Premiere Elements 10 Content 1" and "Adobe Premiere Elements 10 HD Content 1" etc. My understanding is the top level folder should be renamed Templates, but I seem to be getting stuck as to exactly which folder that is. Should the set up be PRE 10\Templates\PRE 10 Content\Setup.exe.
Or, are the installers for 32 and 64-bit versions of Premiere Elements meant to be separate from each other?
Thanks,
Sir_Timbit

SirTimbit
John T. Smith's input sounds sound, there may be one block in pursuing that suggestion.
I would agree with John T. Smith that Adobe is the one to sort out its Adobe Tech document for you if it will. It often restricts its assistance if the matter does not relate to purchased/registered/current version. And, Premiere Elements is not the current version.
Have you contacted Adobe about this matter and been refused help for the reason that I referred to?
And, out of curiosity, I would ask "Does the following apply to you?
Only Enterprise customers can perform the following procedures to silently install Adobe Premiere Elements 10 on Windows with an Adobe volume license (AVL).
What computer are you using and how many installation discs do you have?
Adobe is indeed your first choice, maybe your only choice, on this if it will help you with version 10.
ATR

How to handle "/9.2.0/root.sh as root from another window" in silent instal

Hi,
I was successful to start a silent installation of Oracle9iR2 using a responsefile on my System RHEL 3. But the installation ends soon and a wrong successful install message:
Error :*** Alert: A configuration script needs to be run as root before installation can proceed. Please leave this window up, go run /opt/app/oracle/product/9.2.0/root.sh as root from another window, then come back here and click OK to continue. ***
The installation of Oracle9i Database was successful.
I use -ignorePatchConflicts for ignoring the patch conflicts. But How do I handle these issues. Where I have to run root.sh ... etc in teh Non Interactive Install.
I am scripting solution for non interactive install and manual intervention to run these root.sh shell scripts at different points of install is not a good idea as it wont help me automate the install.
Please let me know if anyone has solved this problem with -silent install.
Thanks in advance.
Senthil

Thats me (OP) again:
I tried setting:
SHOW_ROOTSH_CONFIRMATION=false in the response file. But still no help. The installation exits at run root.sh prompt point. How I can effectively deal with it in a script?

How do I create a silent install for Adobe Robohelp 11.0? AAMEE fails

I have tried to create a silent install for Adobe Roboehelp 11 using AAMEE v. 3.1 but after inserting "product installation folder", "package name" and "save to" and choosing "next" the picture just greys out.
If if choose "next" again I get to the options page but it is empty.
I tried using an older version of AAMEE and here I can create an unserialized build but it wont accept the my license code (which works fine if I install manually)
Does anyone know how to solve this?
I am using Windows 7 Enterprise Edition 64 bit.
Best Regards,
Christian Roejbaek

Hi Christian,
You have to use Creative cloud packager (CCP) to create the package for RoboHelp 11, AAMEE will not work for the latest version. CCP will be available in your LWS website(www.licensing.adobe.com) . Download CCP from LWS website and create a package for RH 11.
Please refer to the below link for more information of CCP:
http://helpx.adobe.com/creative-cloud/packager/creating-packages.html
Once you will reach "The Application and Updates screen " on CCP window then you have to click on "Add Offline Media" and select the "product installer folder" as RH 11 might not show in the list of products on that screen.
After creating the package:
Steps to follow to deploy silently on single machine:
1. Open CMD in Administrator mode.
2. Give the path till inside the build folder of the package. For Example if the build is saved on your Desktop the path in CMD should be as below:
C:\Users\[username]\Desktop\Packagefolder\packagename\Build>
3. Now type the following installation command: msiexec.exe /i packagename.msi /quiet
4. Launch Task Manager.
5.There will be three process of “msiexec.exe”
a) 6.One will be under System
b) 7.Other Two will be under [username].
8.Installation will be completed once both the process of msiexec.exe under the [username] are finished.
9.The installation process with take 5 to 10 minutes
Regards,
Mayank

How to do a silent install of NI-DAQ 7.3.1?

Similar Messages

Maybe you are looking for