How to do authorizations on unassigned nodes for hierarchies

Hi,
Is there a white paper from SAP that shows how to do authorizations for unassigned nodes for the hierarchies? Or has anyone completed this challenge and would be willing to share their approach and strategy?
Thanks
Will

Hi Ashwin,
The characteristics are 0COSTCENTER and ZDEPT. The Hierarchy structure should be
-Test Hierarchy
--Cost center 1
---Dept1
---Dept2
---Dept3
--Cost center 2
---Dept4
---Dept5
---Dept6
--Cost center 3
---Dept7
---Dept8
---Dept9
Etc.
We have transaction data where a certain Cost center doesn't have the department and when displaying the hierarchy there would be some unassigned nodes for the BW report.
What would happen if the following hierarchy is in place and I am trying to do authorizations for the 0COSTCENTER and ZDEPT:
-Test Hierarchy
--Cost center 1
---Dept1
---Dept2
---Dept3
--Cost center 2
---Dept4
---Dept5
---Dept6
--Cost center 3
Where cost center 3 has no department for it?
Thanks and regards
Will

Similar Messages

How to create one more server node for SAP J2EE server?

Hi,
Can any one please suggest how to create one more server node for SAP J2EE server? I am using WAS700.
Thanks and Regards,
Smriti.

Hai,
Login into the Configtool(C:\usr\sap\SID\DVEBMGS<inst no>\j2ee\configtool) if ABAP+JAVA stack or C:\usr\sap\SID\JC<inst no>\j2ee\configtool) if JAVA stack
click on the instance and and select the addserver button on the top to create a servernode for J2EE server.
Thanks and Regards,

How can I make a "property node" for a VI?

Hello!
If I add a boolean button on the FP then I am able to make a property node for that button in the Block Diagram. But how can I make a property node for a VI? I have several VI:s an that together is one program. What I need to do is to verify what kind of VI some of my VI:s is. I need to verify if it is .exe or .vi-file, and if it is .exe then I want to disable run, abort, run continuously bottons otherwise not. I have hard that this is possible to do programmaticaly but I can´t figure out how. I am aware that I could do that manually in the File->vi properties->customize->windows appearance but theese choises makes it last forever.
I want to be able to stop and run and everything if it is a .vi file, but if it is .exe-file then all those buttons should be disabled.
Anyone have an example on this?
In an other message at this Forum I read "You can use the `Front Panel Window. Allow Runtime PopUp`" property to disable run-time shortcuts menues programmaticaly, but still I dont know how to create this property node.
/Amir

You really shouldn't open a new thread. If you don't understand something, ask and we will explain it.
Like I said in the other thread, you can check if you are running in LV or an EXE by using the Application>>Kind property. To get it, place a property node (from the Application Control palette) on the diagram, click it and find the property.
To set the properties for the VI, place another property node, right click it and select Select Class>>VI Server>>VI. You should have the properties you want under Front Panel Window.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf). I believe chapter 17 of the user manual explains about programmatic control of VIs.
Try to take over the world!

How to use Call library function node for a function in dll with VOID data type

Hi All,
I would like to ask for your kind help,
I am facing an issue with the call library node.
I have a C++ function(stdcall), which has void as data type
error code XXXX(hwnd, lID, getValue, *void data1, *void data2)
the data1 and data2 types are always changing depending upoin the value of "getValue".
Primarily i can use call library node multiple times and adapt each node according to the data types of data1 and data2, and extract the values and use in the code. Here is no issue. Real question is:
My question:
How can i just use one time call library node and make a case depending upon the "getvalue", which will control the data type of data1 and data2. Here i really looking for solutions.
My trials:
i used varaints as input to the call libray node for data1 and data2, and selected Parameters in call libraby node as " Adapt to type". here labview just crashed.
i really appreciate your feedbackand suggestions.
Thanks
Kutbuddin
Solved!
Go to Solution.
Attachments:
Clipboard02.jpg ‏103 KB

A variant is a very specific LabVIEW datatype (really a C++ type object internally) and trying to pass that to a function, which excepts a flat memory pointer there, for sure will crash very quickly.
As to endianess, yes Unflatten will be able to adjust for endianess, which in this case however is most likely exectly NOT what you want. So make sure that the you select native type for the endianess input on Unflatten from String. LabVIEW internally works with whatever is the native endianess, as will most likely your C++ DLL. The platform independent big endian format does only come into play when you receive data streams over some streaming interface like a network connection. Here it is desirable to use an endian format that is independent from the actual platform that generates and consumes the data stream. LabVIEWs default endianes is big endian here.
But as long as you pass data directly to native components like DLLs there is no difference in endianess between what LabVIEW uses and what those components use.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to prevent BPC from automated calculating for hierarchies / nodes?

Hi experts,
I am looking for a practicable way to prevent the system from automated calculating for hierarchies, and especially for nodes within hierarchies?
Let's say, I have ENTITIES (AS A HIERACHY) in rows and ACCOUNTS in COLUMNS. Now I want the system to block adding up the values for one specific account on node XY. Instead of the sum of all base member entities, the cell for account XY should be left empty.
Is there a practicable way to deal with this?

Hi Stefan,
you can prevent the system to calculate a node by editing the Formula Property in the Dimension.
You can insert 0 or null to the Formula field for the specific element.
But in this case the values from your leaf elements lying under your node wont be calculated even in higher hierarchy nodes.
For ex.: with the following structure
-A
---A1
A11
A12
---B1
B11
B12
If you set A1 to 0, the top node A will only be calculated by values of B1
Regards
Jörg

How to set authorization in more detail for ME11,e.g. material group, etc.?

Hi,
As we know, we can use plant, purchasing organization, purchasing group as authorization object to carry out authorization check when creating purchasing info record in ME11.
But now my customer wants to set authorization in more detail, for example, use material group and some certain fields in vendor master.
It seems standard authorization setting for ME11 cannot do this.
Is there any method to meet the need? or some enhancements or BADi?
Thanks
Wesley

Hi, Akhileshwar
Thanks for your information. I have thought of creating authorization object values, but the problem is where to let SAP carry out the authorization check to the new object in ME11/ME12.
So I think maybe some enhancements can let us write authority check code to do it.
But I am not sure which enhancement or user exit can be used to write this code.
Wesley

HT1420 my other computer was broken and stolen...its more than 5 .. how can i authorize my new computer for the 6x? again i can not de authorize because the computers are not with me now.

how can i authorize my computer.. my previous 5 computers are stolen and broken. I can not authorize anymore because they re asking me to de authorize the 5 computers but its not with me now.

Go back to the article you asked this question from and use the Deauthorize All function. If that's not an option, use the 'contact iTunes Store Support' link.
(110559)

How do i authorize my new mac for purchases

just got a new mac and need to authorize it for my itunes account how do I do that?

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

How can I authorize my PC computer for Digital Editions after I have accidentally declined authorization?

I have used Digital Editions for about a year without any trouble. Today I was asked to "authorize" my computer. I declined and now am now prevented from copying my books to my e-reader. How can I fix this? This is a real drag.

I have this exact same problem, and I have assignments due that depend on accessing these books.

My computer crashed. How do I authorize the new one for my iPod nano?

My old computer crashed and I restored the music off the iPod back onto this new computer and into iTunes. But, it keeps saying I don't have priveleges to do something. I think it's because the iPod is only registered for the old computer?? I don't know, but could someone please help me out. It's so frustrating dealing with restoring everything and getting your iPod situation back to normal after a computer crash.... Please help me. Thanks.

Do you mean this?
About Authorization and Deauthorization.
If not, you'll have to be more explicit in what you are trying to do and what messages you receive when trying to do it.

How to change a generated root node for a hierarchy?

Hello,
we are loading hierarchies from an ECC system. Some of those hierarchies don't have a root node in the source system.
For those hierarchies, the root node is generated during the loading. This node is generated in english (ie : FUNDS CENTER HIERARCHY for fund centers). Is there a way to change the description and the technical name of this node to have it in another language.
We have tryied to change the language of ALEREMOTE in BI but it did not solve this problem.
Thanks,
Philippe

Hi Simon,
the language that triggered the loading was french.
BI Learner,
- to create a custom hierarchy in a BI system, you can use RSH1 transaction.
- if you want to load it from a SAP source system, you can use standard datasource provided in the business content (usually named *_HIER)
-if you need to load it from a flat file, you can follow the steps of this blog, it will help you:
Hierarchy Upload from Flat files
you can have more information about hierarchies on the help.sap web site :
http://help.sap.com/saphelp_nw70/helpdata/EN/a8/6b023b6069d22ee10000000a11402f/frameset.htm
Regards,
Philippe

How authentication and authorization works in webdynpro for abap and portal

Hi Experts,
I have to create an webdynpro abap application for portal which will update the user information in the backend HR standard table.
The SSO (certificate)setup is already doen between portal and backend sap system . Do I need to pass the portal userID to the webDynpro ABAP application, via IView created to update the table. OR SSO will take care itself.
Thanks and regards,
Ajay

Dear Ajay
If SSO is configured as you have mentioned, then all is ok and you don't need do pass the user ID.
It will be done automatically.
Just try for yourself - create a simple WD ABAP and put it inside an iView.
Then have this WD to write the SY-UNAME on the screen.
That way you will confirm what I'm saying
Kind Regards
/Ricardo Quintas

How to de-authorize registration of ADE for Overdrive on iPad

Adobe will not help as ADE is freeware, sent me here. I have read all FAQs but may have missed it as I can't be the only one. Thanks!

Hello pickypickypicky, We discovered your question/issue on the forum, and are providing this article (OverDrive | How to clear an Adobe ID from the OverDr...) to help you resolve the issue. You can also find many other useful articles and videos at help.overdrive.com.
OverDrive Support Services

How to create a context node for "IBHeader" at the view "BuPaIBaseDetail"?

hi, experts
for the requirement, i have to get data from a root BO-IBHeader in the view of "BuPaIBaseDetail".But the view already has IBHeader's child object-"IBComponent", whose controller class is "CL_CRM_IC_BUPACONTROLLER_CN08", how can i create the context node for "IBHeader"?
angerly wait for the answer. thanks a lot

If you right click on an empty container or a container with an object in it, it has the same available choices to select. However, if you create a blank property node on the block diagram, and wire up the .net object to it, you will see a much different list of properties.
So, the property node created from right clicking a .NET container will be for that container, even if there is an object inside. To create a property node for the object, you must wire the .NET object to an empty property node on the block diagram.
Chris Van Horn
Applications Engineer

How to avoid authorization checks while debugging

Hi,
Can anyone let me to know how to avoid authorization checks while debugging
for a standard transaction?
-B S B

Hello BSB,
To start the debug put /hs will start the system debug.
Then place the break points aat STATEMENT -- MESSAGE and F8
So now the system will stop at the point where it throwing the error message change the value of SY-SUBRC to 0 from 4.
Regards,
Vasanth

How to do authorizations on unassigned nodes for hierarchies

Similar Messages

Maybe you are looking for