How to do the calculations with currency fields in table control?

Hi everybody,
Can anyone tell me how to do the calculations (arithmetical) with the currency fields which have been assigned for a table control fields? Actually they should be fetched from the database table and need to do some calculations and after that the same should get updated at the database level.
Here, i am getting the short dump after doing the calculations and trying to display at the table control field itself.....
Can anyone help me in this issue........
Thank you very much.....in advance,
Somu.

Hi,
Thanks to your replies all,
But, even though the sign check box is checked in the SAP domain WRTV7, in my program it is not showing the negative sign at all...
I am keep trying for all the options...
But still it is not working out...
My requirement is after fetching the data from the database i need to do calculations and save back same to the customized table field, for which the domain i have checked the sign and have done it also...
I'd be highly thankful to you, if you can help me out...
Thank you,
Somu.

Similar Messages

How to create Search Help for a field in Table control !!

Hello Friends,
              I like to know - How to create Search Help for a field in Table control. Is it possible, if it is please share ur knowledge, I wud be happy if U provide some source code example for this.
Thanks,
Senthil

Check the sample code:
*& Include           ZSRO_MPRN_SEARCH                                 *
MODULE PSTLZ_F4 INPUT
MODULE pstlz_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
        stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl     = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = c_x
      determine_loop_index = c_x
    TABLES
      dynpfields           = lt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
    MOVE lt_dynpfields-fieldvalue TO ws_outcode.
    ws_len = STRLEN( lt_dynpfields-fieldvalue ).
    IF ws_len GE 7.
      ws_len = ws_len - 3.
     ws_icode = ws_code+ws_len(3).
      lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
      CONCATENATE lt_dynpfields-fieldvalue '%'
          INTO ws_outcode.
      CONDENSE lt_dynpfields-fieldvalue.
   REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
    ELSE.
      CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
        INTO ws_outcode.
    ENDIF.
   ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl     = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = lt_dnpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode.
    ELSE.
MPRN blank and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1.
    ENDIF.
ELSE.
MPRN exist and Post code exist
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode AND
                   mprn EQ lt_dnpfields-fieldvalue.
    ELSE.
MPRN exist and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE mprn EQ lt_dnpfields-fieldvalue.
    ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'MPRN'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select MPRN'
      value_org       = 'S'
    TABLES
      value_tab       = i_mprn1 "lt_mprn
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
    IF sy-subrc EQ 0.
Updating post code
      CONCATENATE i_mprn1-outcode i_mprn1-incode
                    INTO ws_postcode
                         SEPARATED BY space.
      MOVE ws_postcode TO i_mprn-post_code.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
      ws_dynpfld-fieldvalue = ws_postcode .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
Updating MPRN
      MOVE i_mprn1-mprn TO i_mprn-mprn.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-MPRN'.
      ws_dynpfld-fieldvalue = i_mprn1-mprn .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ELSEIF sy-subrc EQ 2.
    MESSAGE s005(zspa) WITH ws_postcode .
ENDIF.
ENDMODULE.                    "PSTLZ_F4 INPUT
MODULE MPRN_F4 INPUT
MODULE mprn_f4 INPUT.
reading post code
DATA: stepl TYPE systepl,
       stepl_index TYPE systepl.
CLEAR: stepl, stepl_index.
CLEAR:   lt_returntab,lt_dynpfields,i_mprn1.
REFRESH: lt_returntab,lt_dynpfields,i_mprn1.
lt_dynpfields-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields-stepl     = stepl.
APPEND lt_dynpfields. CLEAR lt_dynpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = c_x
      determine_loop_index = c_x
    TABLES
      dynpfields           = lt_dynpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields INDEX 1.
ENDIF.
ws_outcode = lt_dynpfields-fieldvalue.
stepl_index = lt_dynpfields-stepl.
REPLACE '*' WITH ' ' INTO lt_dynpfields-fieldvalue.
IF NOT lt_dynpfields-fieldvalue IS INITIAL.
    MOVE lt_dynpfields-fieldvalue TO ws_outcode.
    ws_len = STRLEN( lt_dynpfields-fieldvalue ).
    IF ws_len GE 7.
      ws_len = ws_len - 3.
     ws_icode = ws_code+ws_len(3).
      lt_dynpfields-fieldvalue = lt_dynpfields-fieldvalue+0(ws_len).
      CONCATENATE lt_dynpfields-fieldvalue '%'
          INTO ws_outcode.
      CONDENSE lt_dynpfields-fieldvalue.
   REPLACE ws_icode WITH ' ' INTO lt_dynpfields-fieldvalue.
    ELSE.
      CONCATENATE lt_dynpfields-fieldvalue+0(4) '%'
        INTO ws_outcode.
    ENDIF.
   ws_ocode = ws_code+0(3).
ENDIF.
reading MPRN
CLEAR:   lt_returntab,lt_dnpfields,i_mprn1.
REFRESH: lt_returntab,lt_dnpfields,i_mprn1.
lt_dnpfields-fieldname = 'I_MPRN-MPRN'.
lt_dnpfields-stepl     = stepl_index.
APPEND lt_dnpfields. CLEAR lt_dnpfields.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = lt_dnpfields
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dnpfields INDEX 1.
ENDIF.
MPRN blank and Post code exist
IF lt_dnpfields-fieldvalue IS INITIAL.
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode.
    ELSE.
MPRN blank and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1.
    ENDIF.
ELSE.
MPRN exist and Post code exist
    IF NOT lt_dynpfields-fieldvalue IS INITIAL.
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE outcode LIKE ws_outcode AND
                   mprn EQ lt_dnpfields-fieldvalue.
    ELSE.
MPRN exist and Post code blank
      SELECT mprn ser_num sub_bud bud_name del_pt_alias
             bud_num dep_street prin_street dbl_dep_street
             dep_locty post_town county outcode incode
             lg_site_ind file_date FROM zspa_mprn INTO
             CORRESPONDING FIELDS OF TABLE i_mprn1
             WHERE mprn EQ lt_dnpfields-fieldvalue.
    ENDIF.
ENDIF.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'MPRN'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select MPRN'
      value_org       = 'S'
    TABLES
      value_tab       = i_mprn1 "lt_mprn
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    READ TABLE i_mprn1 WITH KEY mprn = lt_returntab-fieldval.
    IF sy-subrc EQ 0.
Updating MPRN
      MOVE i_mprn1-mprn TO i_mprn-mprn.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-MPRN'.
      ws_dynpfld-fieldvalue = i_mprn1-mprn .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
     ws_dynpfld-stepl = mprn-current_line.
**code changed by laxman 10.08.2005
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
Updating post code
      CONCATENATE i_mprn1-outcode i_mprn1-incode
                    INTO ws_postcode
                         SEPARATED BY space.
      MOVE ws_postcode TO i_mprn-post_code.
      CLEAR   : i_dnpfld,
                ws_dynpfld.
      REFRESH : i_dnpfld.
      ws_dyname   = 'ZSRO_MASTER_DATA'.
      ws_dynumb   = '0301'.
      ws_dynpfld-fieldname ='I_MPRN-POST_CODE'.
      ws_dynpfld-fieldvalue = ws_postcode .
      ws_dynpfld-stepl      = stepl_index.
      APPEND ws_dynpfld TO i_dnpfld.
**code changed by laxman 10.08.2005
     break gblap0.
     ws_dynpfld-stepl = mprn-current_line.
     LOOP AT i_mprn.
       MOVE i_mprn1-mprn TO i_mprn-mprn.
       MOVE ws_postcode TO i_mprn-post_code.
       MODIFY i_mprn INDEX
                mprn-current_line." transporting MPRN POST_CODE.
     ENDLOOP.
**code changed by laxman 10.08.2005
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          dyname               = ws_dyname
          dynumb               = ws_dynumb
        TABLES
          dynpfields           = i_dnpfld
        EXCEPTIONS
          invalid_abapworkarea = 1
          invalid_dynprofield = 2
          invalid_dynproname   = 3
          invalid_dynpronummer = 4
          invalid_request      = 5
          no_fielddescription = 6
          undefind_error       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
      ENDIF.
    ENDIF.
ELSEIF sy-subrc EQ 2.
    MESSAGE s006(zspa) WITH i_mprn1-mprn .
ENDIF.
ENDMODULE.                    "MPRN_F4 INPUT
MODULE GNTC_F4 INPUT
MODULE gntc_f4 INPUT.
DATA: BEGIN OF lt_gntc OCCURS 0,
          gntc LIKE iflot-zzgntc,
        END OF lt_gntc.
CLEAR:   lt_returntab, lt_gntc.
REFRESH: lt_returntab, lt_gntc.
lt_gntc-gntc = 'DM'.
APPEND lt_gntc. CLEAR lt_gntc.
lt_gntc-gntc = 'NDM'.
APPEND lt_gntc. CLEAR lt_gntc.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZZGNTC'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      window_title    = 'Select Gas Nomination Type Code'
      value_org       = 'S'
    TABLES
      value_tab       = lt_gntc
      return_tab      = lt_returntab
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc EQ 0.
    READ TABLE lt_returntab INDEX 1.
    i_mprn-dm_ndm = lt_returntab-fieldval.
ENDIF.
ENDMODULE.                    "GNTC_F4 INPUT
*&      Module mprn1_f4 INPUT
      text
MODULE mprn1_f4 INPUT.
DATA: lt_f4          TYPE ddshretval OCCURS 0 WITH HEADER LINE,
        lt_returntab1 LIKE ddshretval OCCURS 0 WITH HEADER LINE,
        lt_dynpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE,
        lt_dnpfields1 LIKE dynpread OCCURS 0 WITH HEADER LINE.
DATA: stepl1 TYPE systepl,
        stepl_index1 TYPE systepl.
DATA : i_dnpfld1      LIKE dynpread OCCURS 0 WITH HEADER LINE,
         ws_dyname1     LIKE d020s-prog,
         ws_dynumb1     LIKE d020s-dnum,
         ws_dynpfld1    LIKE dynpread.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
         lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
         stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-POST_CODE'.
lt_dynpfields1-stepl     = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
      determine_loop_index = 'X'
    TABLES
      dynpfields           = lt_dynpfields1
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname           = 'IFLOT'
      fieldname         = 'I_MPRN-MPRN'
      searchhelp        = 'ZS_MPRN_PC'
      dynpprog          = sy-repid
      dynpnr            = sy-dynnr
    TABLES
      return_tab        = lt_f4
    EXCEPTIONS
      field_not_found   = 1
      no_help_for_field = 2
      inconsistent_help = 3
      no_values_found   = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-mprn.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
    ws_dynpfld1-fieldvalue = i_mprn-mprn.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-post_code.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
    ws_dynpfld1-fieldvalue = i_mprn-post_code.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDMODULE.                 " mprn1_f4 INPUT
*&      Module pstlz1_f4 INPUT
      text
MODULE pstlz1_f4 INPUT.
CLEAR: i_dnpfld1, ws_dyname1, ws_dynumb1, ws_dynpfld1,
          lt_f4, lt_returntab1,lt_dynpfields1, lt_f4,
          stepl1, stepl_index1.
REFRESH: i_dnpfld1, lt_returntab1,lt_dynpfields1, lt_f4.
To Determine Steploop Index
lt_dynpfields1-fieldname = 'I_MPRN-MPRN'.
lt_dynpfields1-stepl     = stepl1.
APPEND lt_dynpfields1. CLEAR lt_dynpfields1.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = sy-repid
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
      determine_loop_index = 'X'
    TABLES
      dynpfields           = lt_dynpfields1
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc EQ 0.
    READ TABLE lt_dynpfields1 INDEX 1.
ENDIF.
stepl_index1 = lt_dynpfields1-stepl.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname           = 'IFLOT'
      fieldname         = 'I_MPRN-POST_CODE'
      searchhelp        = 'ZS_MPRN_PC'
      dynpprog          = sy-repid
      dynpnr            = sy-dynnr
    TABLES
      return_tab        = lt_f4
    EXCEPTIONS
      field_not_found   = 1
      no_help_for_field = 2
      inconsistent_help = 3
      no_values_found   = 4
      OTHERS            = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Update tablecontrol
READ TABLE lt_f4 WITH KEY fieldname = 'ZZPSTLZ'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-post_code.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-POST_CODE'.
    ws_dynpfld1-fieldvalue = i_mprn-post_code.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
CLEAR : i_dnpfld1, ws_dynpfld1.
REFRESH: i_dnpfld1.
READ TABLE lt_f4 WITH KEY fieldname = 'MPRN'.
IF sy-subrc = 0.
    MOVE lt_f4-fieldval TO i_mprn-mprn.
    ws_dyname1   = 'ZSRO_MASTER_DATA'.
    ws_dynumb1   = '0301'.
    ws_dynpfld1-fieldname ='I_MPRN-MPRN'.
    ws_dynpfld1-fieldvalue = i_mprn-mprn.
    ws_dynpfld1-stepl      = stepl_index1.
    APPEND ws_dynpfld1 TO i_dnpfld1.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = ws_dyname1
        dynumb               = ws_dynumb1
      TABLES
        dynpfields           = i_dnpfld1
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDMODULE.                 " pstlz1_f4 INPUT
Regards,
Prakash.

Calculations with Currency fields

Hi Experts,
Could you kindly throw some light on how Currency fields are processed in the Dictionary? How does the system calculate the local currency?
For example, let us consider table BSAK, I see the fields WAERS(Curr key), DMBRT (Amount in local currency) and WRBTR (Amount in document currency).
How do I calculate the total Amount for a given values of
LIFNR, BUKRS,GJAHR, MONAT and SHKZG = 'S' ?
Do I just add all the DMBTR values?
What would be the local currency be?
Kindly advice.

Hi Vimal,
The fields DMBRT and WRBTR hold the amount whereas the field WAERS specifies the currency key of these fields . That is whether they are in Indian Currency ( IND ) or is it US Dollars ( USD ) etc... The Table to hold the currency keys is TCURC. You can find this table as a value table in the domain of the field WAERS.
So if you have to calculate the currencies you have to check with their currency keys if the currency key is same then you Add the prices.
Try to write this code in ABAP Editor :
*"Table Declarations...................................................
TABLES :
sflight.                             " Flight
*"Select Screen Elements...............................................
SELECT-OPTIONS :
s_carrid FOR sflight-carrid.         " Carrier ID
*"Data Declarations....................................................
* Work Variables                                                      *
DATA :
w_gross    TYPE p DECIMALS 2,        " Holds Gross Value
w_net      TYPE p DECIMALS 2,        " Holds Net Value
w_curr     LIKE sflight-currency.    " Holds Currency
* Internal table to hold Flight data                                  *
DATA :
t_sflight LIKE
   STANDARD TABLE
         OF sflight.
*                       TOP-OF-PAGE EVENT                             *
TOP-OF-PAGE.
PERFORM top_of_page.
*                    AT SELECTION-SCREEN EVENT                        *
AT SELECTION-SCREEN.
PERFORM at_selection_screen.
*                    START-OF-SELECTION EVENT                         *
START-OF-SELECTION.
PERFORM fetch_sflight_data.
PERFORM display_sflight_data.
*&      Form top_of_page
* This Subroutine Performs the Event Top-Of-Page
* There are no interface parameters to be passed to this subroutine. *
FORM top_of_page .
WRITE :/45 text-001.
ULINE.
ENDFORM.                               " FORM TOP_OF_PAGE
*&      Form AT_SELECTION_SCREEN                                      *
* This Subroutine Performs the Required Input Validations              *
* There are no interface parameters to be passed to this subroutine. *
FORM at_selection_screen .
SELECT carrid                        " Carrier ID
    FROM sflight
    INTO TABLE t_sflight
   WHERE carrid = s_carrid-low.
IF sy-subrc NE 0
AND s_carrid-low NE space.
    MESSAGE e184(bc_global) WITH text-007.
ENDIF.                               " IF SY-SUBRC NE 0
SELECT carrid                        " Carrier ID
    FROM sflight
    INTO TABLE t_sflight
   WHERE carrid = s_carrid-high.
IF sy-subrc NE 0
AND s_carrid-high NE space.
    MESSAGE e184(bc_global) WITH text-008.
ENDIF.                               " IF SY-SUBRC NE 0
ENDFORM.                               " AT_SELECTION_SCREEN
*&      Form FETCH_SFLIGHT_DATA                                       *
* This Subroutine Fetches Data from the Database table Sflight         *
* There are no interface parameters to be passed to this subroutine. *
FORM fetch_sflight_data .
SELECT carrid                        " Carrier ID
         connid                        " Connection ID
         fldate                        " Flight Date
         price                         " Price
         currency                      " Currency
         seatsmax                      " Seats Maximum
         seatsocc                      " Seats Occupied
    FROM sflight
    INTO CORRESPONDING FIELDS OF
   TABLE t_sflight
   WHERE carrid IN s_carrid.
ENDFORM.                               " FORM FETCH_SFLIGHT_DATA
*&      Form display_sflight_data
* This Subroutine Displays Data from the Database table Sflight        *
* There are no interface parameters to be passed to this subroutine. *
FORM display_sflight_data .
LOOP AT t_sflight INTO sflight.
    AT FIRST.
      FORMAT COLOR 1.
      WRITE : /5 'Carrier ID'(002),
              140 space,
              /25 'Flight Date'(003),
              140 space,
              /44 'Seats'(004),
               65 'Seats'(004),
              140 space,
              /44 '(Maximum)'(005),
               65 '(Occupied)'(006),
              140   space.
      ULINE.
    ENDAT.
*" AT NEW CONNID
    AT NEW connid.
      FORMAT COLOR 6 INTENSIFIED OFF.
      WRITE :/ sflight-carrid   UNDER text-002,
             10   sflight-connid.
    ENDAT.                             " AT NEW CONNID
    FORMAT COLOR 5 INTENSIFIED OFF.
    WRITE :/ sflight-fldate   UNDER text-003,
              sflight-seatsmax UNDER text-005,
              sflight-seatsocc UNDER text-006,
           90 sflight-currency,
          110 space.
    w_gross = w_gross + sflight-price * sflight-seatsocc.
    w_curr = sflight-currency.
*" AT END OF CONNID
    AT END OF connid.
      FORMAT COLOR 3 INTENSIFIED OFF.
      WRITE :/ 'Total Bookings so far '(009),
             40 w_gross,
             60 w_curr.
      w_net = w_net + w_gross.
    ENDAT.                             " AT END OF CONNID
*" AT END OF CARRID
    AT END OF carrid.
      SKIP 2.
      FORMAT COLOR 3 INTENSIFIED ON.
      WRITE :/ 'Total Bookings so far for '(013),
               sflight-carrid,
               w_net,
               w_curr.
      ULINE.
      CLEAR w_gross.
      CLEAR w_net.
    ENDAT.                             " AT END OF CARRID
ENDLOOP.                             " LOOP AT T_SFLIGHT...
ENDFORM.                               " FORM DISPLAY_SFLIGHT_DATA
This is to sum the prices of a flight according to currency key
Regards,
Swapna.

How to edit the cube with new fields without changing historical in BI 7.0

HI,
I have requirment that need to edit cube with new fields and without changing historical data on it.
Please some one can advise me abt the above scenario.
Note:I am using BI7.0

hi Krish,
In BI 7.0,
we cannot add a characteristic to an existing dimension if the data is not deleted from the cube.
It can go to a new dimension and that will not change the existing structure of the cube tables, but will just add to it (as another dim table). or use remodeling.
for more details, please seach threads.....
with hopes
ARS

How to provide F4 help for a field in table control

Hi Friends,
I have requirement like below.
1.Create one custom transaction code with header and item information.
2.In item level, we will be designed table control to enter/display the data.
3.Table controls first field will be material number and next DOT number (Material may have many DOT numbers) and so on.
4.First user will enter material number in the table controls first rows first field and go to DOT number field.
5.DOT number has drop down option. If user selects drop down box of DOT number, he gets all the DOT numbers available in database. User selects one DOT number and double clicks on it then it will be populated in DOT number field box.
But for point number 5, business wants like when ever user enters material number in table control first field then select DOT numbers drop down then they want to see the particular materials DOT numbers only in the drop down list for selection. Not all DOT numbers available in data base. Same thing should happen for all item lines in table control.
Please see below example.
Assume data base table has 10 DOT numbers. But material number has only 2 DOT numbers. When ever user enters material number in item level table control and selects DOT numbers drop down then it should show only 2 DOT numbers which are related to particular material number. Not all 10 DOT numbers.
Could you please suggest me, how can we achieve this?

Hello,
Check this :-
For POV
Input Help in Dialog Modules
You can call dialog modules in the POV event using the event keyword PROCESS ON VALUE-REQUEST.
PROCESS ON VALUE-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON VALUE-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F4 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. The module <mod> is defined in the ABAP program like a normal PAI module. However, the contents of the screen field <f> are not available, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. You can now program your own value lists in the module. However, this procedure is only recommended if it really is not possible to use a search help. Defining search helps is much easier than PROCESS ON VALUE-REQUEST, since the system takes over some of the standard operations, such as getting field contents from the screen. It also ensures that the F4 help has a uniform look and feel throughout the system. Furthermore, it means that you do not have to reassign input help to fields on each screen.
Despite the introduction of search helps (and search help exits), there are still cases in which you need to use parts of the standard F4 functions directly. In this case, there are some standard function modules that you can use in the POV event. They support search helps, as well as all other kinds of input help, and are responsible for data transport between the screen and the input help. These all have the prefix F4IF_. The most important are:
F4IF_FIELD_VALUE_REQUEST
Calls the input help of the ABAP Dictionary dynamically. You can pass the component names of a structure or database table of the ABAP Dictionary to the function module in the import parameters TABNAME and FIELDNAME. The function module starts the ABAP Dictionary input help for this component. All of the relevant screen fields are read. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
F4IF_INT_TABLE_VALUE_REQUEST
This function module displays a value list that you created in an ABAP program. The value list is passed to the function module as the table parameter VALUE_TAB. If you specify the import parameters DYNPPROG, DYNPNR, and DYNPROFIELD, the users selection is returned to the corresponding field on the screen. If you specify the table parameter RETURN_TAB, the selection is returned into the table instead.
There are also two function modules - DYNP_VALUES_READ and DYNP_VALUES_UPDATE - that can read the values of screen fields and return values to them during the POV event. For further information, refer to the relevant function module documentation.
Input help in dialog modules
REPORT DEMO_DYNPRO_F4_HELP_MODULE.
TYPES: BEGIN OF VALUES,
CARRID TYPE SPFLI-CARRID,
CONNID TYPE SPFLI-CONNID,
END OF VALUES.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
DATA: PROGNAME LIKE SY-REPID,
DYNNUM LIKE SY-DYNNR,
DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
VALUES_TAB TYPE TABLE OF VALUES.
CALL SCREEN 100.
MODULE INIT OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE VALUE_CARRIER INPUT.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = 'DEMOF4HELP'
FIELDNAME = 'CARRIER1'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CARRIER'.
ENDMODULE.
MODULE VALUE_CONNECTION INPUT.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = PROGNAME
DYNUMB = DYNNUM
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = DYNPRO_VALUES.
READ TABLE DYNPRO_VALUES INDEX 1 INTO FIELD_VALUE.
SELECT CARRID CONNID
FROM SPFLI
INTO CORRESPONDING FIELDS OF TABLE VALUES_TAB
WHERE CARRID = FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'CONNID'
DYNPPROG = PROGNAME
DYNPNR = DYNNUM
DYNPROFIELD = 'CONNECTION'
VALUE_ORG = 'S'
TABLES
VALUE_TAB = VALUES_TAB.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The input fields have been adopted from the program fields CARRIER and CONNECTION. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
MODULE INIT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON VALUE-REQUEST.
FIELD CARRIER MODULE VALUE_CARRIER.
FIELD CONNECTION MODULE VALUE_CONNECTION.
When the user chooses input help for the individual fields, the following is displayed:
For the Airline field, the POV module VALUE_CARRIER is called. The function module F4IF_FIELD_VALUE_REQUEST displays the input help for the component CARRIER1 of the structure DEMOF4HELP from the ABAP Dictionary, namely the search help DEMOF4DE. The users selection is returned to the screen field CARRIER.
For the Flight number field, the POV module VALUE_CONNECTION is called. The function module DYNP_VALUE_READ transports the value of the screen field CARRIER into the program. The program then reads the corresponding values from the database table SPFLI into the internal table VALUES_TAB using a SELECT statement, and passes the internal table to F4IF_INT_TABLE_VALUE_REQUEST. This displays the internal table as input help, and places the users selection into the screen field CONNECTION.
For POH------------
Field Help
There are three ways of displaying field help for screen elements:
Data Element Documentation
If you place a field on the screen in the Screen Painter by copying a ABAP Dictionary field, the corresponding data element documentation from the ABAP Dictionary is automatically displayed when the user chooses field help (as long as the help has not been overridden in the screen flow logic).
For further information about creating data element documentation, refer to data elements.
Data Element Supplement Documentation
If the data element documentation is insufficient, you can expand it by writing a data element supplement
Data element supplement documentation contains the heading Definition, as well as the following others:
Use
Procedure
Examples
Dependencies
To create data element supplement documentation for a screen, choose Goto ® Documentation ® DE supplement doc. from the element list of the screen. A dialog box appears in which the system proposes a number as the identified for the data element supplement. You can then enter help texts for the above headings using the SAPscript editor.
Data element supplement documentation created in this way is program- and screen-specific. Any data element supplement documentation created in the ABAP Dictionary with the same number is overridden by the screen-specific documentation. You can link existing data element supplement documentation created in the ABAP Dictionary with a screen field by using the table THLPF. To do this, crate a new row in THLPF containing the following data: Program name, screen name, field name, and number of the data element supplement documentation.
To display data element supplement documentation, you must code the following screen flow logic in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> [MODULE <mod>] WITH <num>.
After PROCESS ON HELP-REQUEST, you can only use FIELD statements. If there is no PROCESS ON HELP-REQUEST keyword in the flow logic of the screen, the data element documentation for the current field, or no help at all is displayed when the user chooses F1. Otherwise, the next FIELD statement containing the current field <f> is executed.
If there is screen-specific data element supplement documentation for the field <f>, you can display it by specifying its number <num>. The number <num> can be a literal or a variable. The variable must be declared and filled in the corresponding ABAP program.
You can fill the variables, for example, by calling the module <mod> before the help is displayed. However, the FIELD statement does not transport the contents of the screen field <f> to the ABAP program in the PROCESS ON HELP-REQUEST event.
For further information about data element supplement documentation, refer to Data Element Supplements.
Calling Help Texts from Dialog Modules
If data element supplement documentation is insufficient for your requirements, or you want to display help for program fields that you have not copied from the ABAP Dictionary, you can call dialog modules in the POH event:
PROCESS ON HELP-REQUEST.
FIELD <f> MODULE <mod>.
After the PROCESS ON HELP-REQUEST statement, you can only use the MODULE statement together with the FIELD statement. When the user chooses F1 for a field <f>, the system calls the module <mod> belonging to the FIELD <f> statement. If there is more than one FIELD statement for the same field <f>, only the first is executed. However, the contents of the screen field <f> are not available in the module <mod>, since it is not transported by the FIELD statement during the PROCESS ON HELP-REQUEST event. The field help should not be dependent on the user input.
The module <mod> is defined in the ABAP program like a normal PAI module. The processing logic of the module must ensure that adequate help is displayed for the field in question. Instead of calling an extra screen with text fields, you should use one of the following function modules to display a suitable SAPscript document:
HELP_OBJECT_SHOW_FOR_FIELD
This function module displays the data element documentation for components of any structure or database table from the ABAP Dictionary. You pass the name of the component and structure or table to the import parameters FIELD and TABLE.
HELP_OBJECT_SHOW
Use this function module to display any SAPscript document. You must pass the document class (for example, TX for general texts, DE for data element documentation) and the name of the document to the import parameters DOKCLASS and DOKNAME. For technical reasons, you must also pass an empty internal table with the line type TLINE to the tables parameter of the function module.
For further information about how to create SAPscript documents, refer to the Documentation of System Objects documentation.
Field help on screens.
REPORT DEMO_DYNPRO_F1_HELP.
DATA: TEXT(30),
VAR(4),
INT TYPE I,
LINKS TYPE TABLE OF TLINE,
FIELD3, FIELD4.
TABLES DEMOF1HELP.
TEXT = TEXT-001.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE F1_HELP_FIELD2 INPUT.
INT = INT + 1.
CASE INT.
WHEN 1.
VAR = '0100'.
WHEN 2.
VAR = '0200'.
INT = 0.
ENDCASE.
ENDMODULE.
MODULE F1_HELP_FIELD3 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
EXPORTING
DOKLANGU = SY-LANGU
DOKTITLE = TEXT-002
CALLED_FOR_TAB = 'DEMOF1HELP'
CALLED_FOR_FIELD = 'FIELD1'.
ENDMODULE.
MODULE F1_HELP_FIELD4 INPUT.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
DOKCLASS = 'TX'
DOKLANGU = SY-LANGU
DOKNAME = 'DEMO_FOR_F1_HELP'
DOKTITLE = TEXT-003
TABLES
LINKS = LINKS.
ENDMODULE.
The next screen (statically defined) for screen 100 is 100. It has the following layout:
The screen fields DEMOf1HELP-FIELD1 and DEMOF1HELP-FIELD2 from the ABAP Dictionary and the program fields FIELD3 and FIELD4 are assigned to the input fields. The pushbutton has the function code CANCEL with function type E.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
PROCESS ON HELP-REQUEST.
FIELD DEMOF1HELP-FIELD2 MODULE F1_HELP_FIELD2 WITH VAR.
FIELD FIELD3 MODULE F1_HELP_FIELD3.
FIELD FIELD4 MODULE F1_HELP_FIELD4.
The components FIELD1 and FIELD2 of structure DEMOF1HELP both refer to the data element DEMOF1TYPE. This data element is documented, and also has two supplements with numbers 0100 and 0200.
The following field help is displayed:
When the user chooses F1 on the input field for DEMOF1HELP-FIELD1, the data element documentation for DEMOF1TYPE is displayed, since the field does not occur in the PROCESS ON HELP-REQUEST event.
If the user chooses F1 repeatedly for the input field DEMOF1HELP-FIELD2, the data element documentation is displayed, along with the supplement documentation for either 0100 or 0200 alternately. The variable VAR is filled in the dialog module F1_HELP_FIELD2.
When the user chooses F1 on the input field for FIELD3, the data element documentation for DEMOF1TYPE is displayed, since this is called in the dialog module F1_HELP_FIELD3 by the function module HELP_OBJECT_SHOW_FOR_FIELD.
When the user chooses F1 on the input field for FIELD4, the SAPscript documentation DEMO_FOR_F1_HELP is displayed, since this is called in the dialog module F1_HELP_FIELD4 by the function module HELP_OBJECT.
Regards,
Deepu.K

How to get the Number of lines displayed in table control in bdc

Hi,
when we write a bdc for a standard transaction, if we encounter a table control, we fill the values for each record like field(01), and the second record field(02) .......and so on..
if only 3 records are displayed in the screen and if we have 5 records to be filled in the table control, how to write the logic for that?
how to track of how many lines are getting displayed in the table control .. again it depends on the screen resolution i think..
useful answers will be rewarded
shekhar

Hi,
Here is the solution code for this :-
data for controlling paging on screen 0102
DATA: W_MAXLINES(2) TYPE N,
W_NEXT_LINE(3) TYPE N,
W_PAGE(1), "y = page forward, n otherwise
W_SCRLEN(2) TYPE I,
W_SCRLINE(2) TYPE I.
DATA: BEGIN OF W_HDR.
INCLUDE STRUCTURE D020S.
DATA: END OF W_HDR.
DATA: BEGIN OF W_FLD OCCURS 100.
INCLUDE STRUCTURE D021S.
DATA: END OF W_FLD.
DATA: BEGIN OF W_LOG OCCURS 20.
INCLUDE STRUCTURE D022S.
DATA: END OF W_LOG.
DATA: BEGIN OF W_MC OCCURS 20.
INCLUDE STRUCTURE D023S.
DATA: END OF W_MC.
DATA: BEGIN OF W_DYNPRONAME,
PROGRAM(8) VALUE 'SAPMM60X',
DYNPRO(4) VALUE '0102',
END OF W_DYNPRONAME.
FORM GET_MAX_LINES.
set w_maxlines to the number of var-loop occurrences on the screen so
that we know when to page forward on screen 0102
also initialise w_next_line to zero for GET_NEXT_LINE
this subroutine caters for all cases - including screens without loops
CLEAR: W_MAXLINES,
W_NEXT_LINE.
IMPORT DYNPRO W_HDR
W_FLD
W_LOG
W_MC
ID W_DYNPRONAME.
LOOP AT W_FLD WHERE LTYP EQ 'L'.
MOVE W_FLD-LINE TO W_SCRLINE. "first var-loop line
MOVE W_FLD-LBLK TO W_SCRLEN. "depth of loop block
EXIT.
ENDLOOP.
IF SY-SUBRC EQ 0
AND W_SCRLEN NE 0.
sy-srows = total no of lines on screen
w_scrline = actual first line of loop so that
w_scrline - 1 = number of heading lines (before loop)
4 = no of lines at top of screen - command line, pushbuttons, 2 ulines
3 = no of lines after loop - uline & Page count
w_scrlen = no of lines in loop block
w_maxlines = sy-srows - ( wscrline - 1 ) - 4 - 3
and then 1 less but not sure why!
W_MAXLINES = SY-SROWS - W_SCRLINE - 1 - 4 - 3.
W_MAXLINES = W_MAXLINES - 1.
W_MAXLINES = W_MAXLINES DIV W_SCRLEN.
ELSE.
MOVE 99 TO W_MAXLINES. "this required if no screen loop
ENDIF.
ENDFORM.
FORM GET_NEXT_LINE.
set w_page if page forward is required
W_NEXT_LINE = W_NEXT_LINE + 1.
IF W_NEXT_LINE GT W_MAXLINES.
W_NEXT_LINE = 1.
W_PAGE = 'Y'.
ELSE.
W_PAGE = 'N'.
ENDIF.
ENDFORM.
Hope it helps.
reward if helpful.
Regards,
Sipra

Issue with input field in table control

Hi,
I have an issue with field acgl_item-rstgr in the table control.
I have created a screen program with a table control.
In the control i have added a dictionary field as acgl_item-rstgr.
When i execute, do f4 on the input field, select a value and press enter, then it is showing me
error as 'Entry 'val' does not exist in T053R (check entry). Its really weird to understand this. I have selected the value
from f4 and even then it says this. Its working for all other columns, but not working only for RSTGR.
Plz help me on this regard.
Code is like this.
TYPES : BEGIN OF ty_rstgr,
rstgr TYPE RSTGR,
END OF ty_rstgr.
TABLES : ACGL_ITEM.
DATA : it_rstgr TYPE TABLE OF ty_rstgr.
DATA : wa_rstgr TYPE ty_rstgr.
CONTROLS : table TYPE TABLEVIEW USING SCREEN 100.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT it_rstgr INTO wa_rstgr WITH CONTROL TABLE.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
LOOP AT it_rstgr.
ENDLOOP.
Thanks,

Hi Navitha,
Its Check Table concepts for the error u stated. Please check wht the Search help ur using...Because for this field there is no search help at value table level...Use search help that hold all master data or create a custom search field in SE11 level or in program level.
Cheers,
Naveen

How to populate a listbox with key in a table control

I have the following code:
MODULE carga_huecos INPUT.
DATA: BEGIN OF li_huecos OCCURS 0,
        key(40) TYPE c,
        text(80) TYPE c,
END OF li_huecos.
DATA: BEGIN OF estru_hueco OCCURS 0,
      hueco LIKE zmov_wm-hueco,
END OF estru_hueco.
CLEAR: li_huecos, estru_hueco.
REFRESH: li_huecos, estru_hueco.
SELECT lgpla
    FROM lagp
    INTO TABLE estru_hueco
WHERE lgnum = 'WWM' AND
        lgtyp = i_zmov_wm-almacen.
LOOP AT estru_hueco.
    li_huecos-key = estru_hueco-hueco.
    li_huecos-text = estru_hueco-hueco.
    APPEND li_huecos.
    CLEAR li_huecos.
ENDLOOP.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'I_ZMOV_WM-HUECO'
      values          = li_huecos[]
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I see that internal table li_huecos has the values I need. But vrm_set_values function is not working. I need this values to be seen in a table control field which I have defined as "listbox with key". The name of the internal table associated to the table control is "I_zmov_wm" and the field is HUECO.
After function is executed sy-subrc = 0 but no value is seen in the list.
Thanks.

hi ,
instead of this
LOOP AT estru_hueco.
li_huecos-key = estru_hueco-hueco.
li_huecos-text = estru_hueco-hueco.
APPEND li_huecos.
CLEAR li_huecos.
ENDLOOP.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'I_ZMOV_WM-HUECO'
values = li_huecos[]
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
add this
data : name type vrm_id .
LOOP AT estru_hueco.
li_huecos-key = estru_hueco-hueco.
li_huecos-text = estru_hueco-hueco.
APPEND li_huecos.
CLEAR li_huecos.
ENDLOOP.
name = 'I_ZMOV_WM-HUECO' .
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id =   name
values = li_huecos[]
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
IF sy-subrc 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
regards
Deepak.

How can i enable a column or field in table control

hi all,
i have a table control and in which some column is there, and all are disable mode now my requirement is :
i want a column enable in this table control with a change button is there.
so what is the functionality for this change button, if i click this button one of the field is enable i.e in change mode.
for example- i have 4 fields: in a table control like-
emp no | name | date| time|
so i want to enable the field date.if i press the change button
any one can help me on this, it is very urgent.
pls send me any code ...if u have.
thanks,
vipin

have a look at this sample code
In PAI write :
CASE sy-ucomm.
when 'CHANGEBUTTON'.
Loop at screen.
    IF field1 = 'MATNR'.
      Screen-active = 0.
   endif.
modify screen.
endloop.
endcase.

How to enable the 'Ship-To Address' field only in 'display ' mode in the SC

Hello,
We would like the 'Ship-To Address' field to be locked for change mode in the SC.
Regards,
Lina

Hi ,
If you wish to hide or show fields, proceed as follows(through screen variants):
1. Determine the screen variant, for example, BBP_SC(For shopping cart), using the list in documentation of BADI BBP_SCREENVARIANT.
2. Copy this screen variant, for example, in Zbbp_SC, in Transaction SHD0.
3. Change the new screen variant as required. Note that you can only change the display properties for fields of table controls. You can switch the display on and off.
4. Implement the appropriate method (see the list above). Fill the export parameter EV_SCVARIANT with the new screen variant.
You can create multiple screen variants for a screen and then select these in the BAdI depending on the user or on other criteria.
here is sample code in BADI BBP_SCREENVARIANT implementation after creating Z screen variant.
Method IF_EX_BBP_SCREENVARIANT~GET_SCREENVARIANT_SC.
IF iv_progname EQ 'SAPLBBP_SC_UI_ITS'
AND iv_dynnr EQ '0120'
AND flt_val EQ c_fltval.
IF iv_scvariant EQ 'BBP_SC'.
ev_scvariant = 'Zvariant'.
ENDIF.
ENDIF.
ENDMETHOD.
Please reward points if helpful..
Thanks
Venkatesh

Search help for a field in table control based on another field value

Hi,
I want to attach the Search help for a field in table control based on another field value.
Please help me asap.
Will be highly rewarded

HI,..
Check these links
search help in table control
Re: How to create Search Help for a field in Table control !!
How to create Search Help for a field in Table control !!
F4 Help In Table Control
Control table F4 help
Problem in F4 help in screen field
check this code
DATA: BEGIN OF it_value4 OCCURS 0,
         TEXTCODE LIKE ZXX-TEXTCODE,
         TEXTDESC LIKE ZXX-TEXTDESC,
       END OF it_value4.
progname = sy-repid.
dynnum   = sy-dynnr.
         SELECT TEXTCODE TEXTDESC
           FROM xxxx
           INTO CORRESPONDING FIELDS OF TABLE<b> it_value4</b>
          WHERE LOSS_CODE =<b> IT_VALUE1 .</b>
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield    = 'TEXTCODE'
      dynpprog    = progname
      dynpnr      = dynnum
      dynprofield = 'ITVALUE-TEXTCODE' "-->UR 4 th filed value in screen
      value_org   = 'S'
    TABLES
      value_tab   = it_value4.
endmodule.
Message was edited by:
        veereshbabu ponnada

How to populate the calculated value into screen field.

I am doing one enhancement in QM.I have added one custom screen to notification transaction ( QM01/QM02/QM03) transaction tab strip control using the enhancement QQMA0001.The Details of the calling and called screens as shown bellow
The Calling screen: SAPLIQS0
Screen Number: 7790
Screen Area :USER0001
Called Screen: SAPLXQQM
Screen Number: 0101
I have developed the Custom Screen in screen 0101 and called in PBO of program SAPLIQS0 7790 screen.
The Screen in calling perfectly .The Custom screen having different fields like Raw cost, Intermediate cost, Finished cost, SCAR Cost and Sales Order Cost Etc... These fields are out put filed types. No input for these screens.. I have few doubts regarding this
How to populate the calculated values in Custom screen?
Where we wrote the code to populate the calculated values in custom screen?
You have any idea please guide me
Thanks & Regards,
Samantula

As your screen fields should be global variables in SAPLXQQM, you may initialize them by implementing function module EXIT_SAPMIWO0_008 which also belongs to SAPLXQQM (Customer Exit: Transfer Notification Data to User Screen)

Problem with currency field in smart form

hi
friends ..
i had problem with currency field in smartform iam printing 5 currecny
fields after the main window .But not getting printed on right way gets printed down from the given mesaurement and i get lot of gap betwen the
each fields for ex.
33,260.00
120.00
0.00
0.00
0.00
i thought the the problem is with space .so iwanted to condense it but cannot as it is currency field so move into character fields .but the user want out put in currency format like 22,60.20 if i get the value in char variable i get 2260.20 which i dont want .
so pls help me how to condense or shift left and print the currency field on right place.
regards
answers will be rewarded points.

hi,
this is a normal problem u can avoid this by moveing these currencu value to a character field then print the char field us ing condece... &var(C)&..
eve if not solve the problem use the TEMPLATE node..
Please Close this thread.. when u r problem is solved. Reward all Helpful answers
Regards
Naresh Reddy K

How to use the Calculated attibute in view object

Hi,
I have a view object query with the calculated attribute name as 'TRANCODE' in the below sql.This query works for the initial page loading.
After the page gets loaded, there is a search section in the same page at the top.
Here i will have to build the whereclause to the same query and retrieve the values.
i am using jDeveloper 10.1.3.1, with adf and jHeadstart.
Can some one tell as how to use the calculated attribute TRANCODE in whereclause?
SELECT /*+ first_rows(10) */
BatchCntl.FILE_CNTL_ID,
CASE WHEN chk_bit(Entry.ENTRY_FLAGS, 2)='Y' OR Entry.ENTRY_SUBSTATUS = 'D' OR Entry.ENTRY_SUBSTATUS = 'J'
THEN
CASE eeh.TRAN_CODE
WHEN '21' THEN 'C'
WHEN '22' THEN 'C'
WHEN '31' THEN 'C'
WHEN '32' THEN 'C'
WHEN '26' THEN 'D'
WHEN '27' THEN 'D'
WHEN '36' THEN 'D'
WHEN '37' THEN 'D'
ELSE eeh.TRAN_CODE
END
ELSE
CASE Entry.TRAN_CODE
WHEN '21' THEN 'C'
WHEN '22' THEN 'C'
WHEN '31' THEN 'C'
WHEN '32' THEN 'C'
WHEN '26' THEN 'D'
WHEN '27' THEN 'D'
WHEN '36' THEN 'D'
WHEN '37' THEN 'D'
ELSE Entry.TRAN_CODE
END
END AS TRANCODE,
FROM Batch_Cntl BatchCntl, Entry, ENTRY_EDIT_HIST eeh
WHERE (BatchCntl.BATCH_TYPE = 'E')
AND (BatchCntl.BATCH_STATUS in ('A','D','R','P'))
AND entry.in_batch_cntl_id = BatchCntl.BATCH_CNTL_ID
and Entry.fi_rt = eeh.fi_rt (+)
and Entry.entry_id = eeh.entry_id (+)
AND (Entry.ENTRY_STATUS in ('A','D','R','P'))
ORDER BY BatchCntl.BATCH_CNTL_ID, Entry.entry_id
regards
Raj.

Let's say your application module is com.yourcompany.someapp.services.MyService, and let's say you authored a method like the following in the MyServiceImpl.java file:
public void doSomething(int i, String s) {
}and you exposed this AM custom method using the AM editor.
BC4J design time will automatically create you the com.yourcompany.someapp.services.common.MyService interface that will look like this if you go look at the source code:
package com.yourcompany.someapp.services.common;
import oracle.jbo.ApplicationModule;
public interface MyService extends ApplicationModule {
public void doSomething(int i, String s);
}To use your custom method from a client, just cast your ApplicationModule to your custom interface like this:
import com.yourcompany.someapp.services.common.MyService;
MyService mySvc = (MyService)yourAM;
mySvc.doSomething(1,"foo");

How to encrypt the text in password field in Oracle Forms version 6i

Need help!
How to encrypt the text in password field in Oracle Forms version 6i?
one way is to change the settings in the property palette. Can somebody provide me some script to be run while the form is running which will enable the password to be encrypted?
Thanks!

Hello,
Do you mean "hidden" (replaced with stars) or encrypted (that needs to be decrypted ?
Francois

How to do the calculations with currency fields in table control?

Similar Messages

Maybe you are looking for