How to donwload info related to swift mt100  to unix server?

Hi.
I need a little help.
We are using the program RFFOM100 in order to download info of swift mt100, but we just can download to pc, but can not download to unix server, how could we perform this action?
Thanks in advance.
Albio.-

Hi,
Thanks for your reply,
I tried with this option:
2 - output in file system
And we are getting this error:
The file /HR_PR.110507.154809.01 could be not open
Also, the lenght of the file name it's too short, and we need one longer. How can we solve this issue?
Thanks in advance,
Albio

Similar Messages

  • How to Maintain Info related to an Applicant's race in PB10

    Hi All,
    I am currently configuring Recruitment Module. I would like to know what's the equivalent of Infotype 77, that I would need in TCODE: PB10 ( Initial Entry of Applicant Data) in order for me to maintain the race info of an applicant. This is not available in the standard PB10 transaction.
    Looking forward to hear from you all.
    Regards,
    Aslam

    Hi,
    If you want to add what ever infotype information for the Applicant. You need to go PB30 and give that IT and then update the information.
    Thanks and Regards,
    Revathi.

  • How to refer to the xml file located on unix server

    I have a xml file which is located on unix server and have a hard time, reverse engg. it .
    if anyone has any knowledge on this , that will be helpful.

    I have application server where my xml is located.e..g /tmp/xyz.xml
    I have designer on my laptop from where i have created a agent which points to my application server.
    I am able to create a data server which does say test successful.
    In model i tried to create new model and trying to reverse engg. the xml now i get following error .
    java.sql.SQLException: Could not generate the DTD because the file could not be created. Verify that you have write permission in the directory.
    if you can point me to documentation which has some information on this will be helpful or any hint..

  • How to execute a system command on a remote UNIX server?

    I would like to execute a system command (for example "df") on a remote UNIX machine.
    A simple example would be welcome...
    Thanks

    I would like to execute a system command (for example
    "df") on a remote UNIX machine.
    A simple example would be welcome...None will be forthcoming.
    Executing a process is relatively simple. However doing this on a remot system is another matter.
    See http://sourceforge.net/projects/sshtools/
    and/or http://javassh.org/space/start
    Other resources to be found with Google.

  • HT4527 how to transfer info to a mac book pro from a pc i need to get my iTunes and other iTunes related items off of my old computer so i can sync my phone and get my music

    how to transfer info to a mac book pro from a pc i need to get my iTunes and other iTunes related items off of my old computer so i can sync my phone and get my music.
    I have already tranferd some info to an external hard drive i just need to get my itune items. also i have heard if you plug your phone to a differnt computer you lose of you information.
    i need help please.

    The tv is a extended display on your mac like a second moitor you want to mirror them (same thing on both)
    This should help you

  • How to make site root-relative links work in DW and Server both?

    See details on buggy DW image link behavior, below. My question is:
    1) how to make site root-relative links work in DW and Server both? Or…
    2) how to reliably automate the change of several hundred legacy root-relative links of the form
    /images/image.jpg  to document-relative?
    That is, to
    ../images/image.jpg or
    ../../images/image.jpg or
    ../../../images/image.jpg etc…depending on where the directory is.
    The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
    I tried changing the files to how DW creates root relative links now:
    /public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
    I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
    The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link?  I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
    It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
    Summary of buggy behavior: (see test with images here)
    "old style" site root link
          /images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: broken (grey w/ broken icon)
          Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
          Browser: good
          Ease of switching: n/a (existing format)
    "new style" site root relative link
          /public_html/images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: good
          Link check in DW: good
          Browser: broken
          Ease of switching: easy
    Document relative link
          ../../images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: good
          Link check in DW: good
          Browser: good
          Ease of switching: hard (how to automate?)
    Absolute link
          http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
          Design veiw in DW: broken (grey w/ broken icon)
          Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
          Browser: good
          Ease of switching: n/a...not a real option
    Thanks!
    Similar discussion on "/"

    Hello again Jon!
    Thanks for jumping on this.
    All clear and understood about where publc_html is etc.
    No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
    "/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
    Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
    The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url,  which is automatically set to http://www.oasisdesign.net/public_html/
    it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
    Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
    Art
    PS--don't  have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
    Is there an easy, automated way to change links sitewide from document to root relative?

  • [svn:fx-trunk] 7784: adding xslt change so info related to Alternative shows up in the asdoc

    Revision: 7784
    Author:   [email protected]
    Date:     2009-06-12 07:46:21 -0700 (Fri, 12 Jun 2009)
    Log Message:
    adding xslt change so info related to Alternative shows up in the asdoc
    QE Notes: None.
    Doc Notes: None.
    Modified Paths:
        flex/sdk/trunk/asdoc/templates/class-parts.xslt
    Added Paths:
        flex/sdk/trunk/asdoc/templates/images/P_AlternativeMetadataIndicator_30x28_N.png

    I've checked the resolution in Photoshop just as a double-check and it shows resolution as 300 PPI. When you say "because they can be mixed" do you mean because elements and graphics with the PDF can be of varying resolutions? I hadn't thought of that, if that's what you meant. I do have some items within my pdf that might be lower resolution.
    If these show up in my Preflight Panel as an issue, does this mean they would be flagged also with the Printer? In trying to find a resolution I read several forum discussions about how Printers often run your document through a Preflight process and will send it back when there are low resolution images in the document.
    Is there some other way to be sure these images are in the InDesign document as 300 PPI so I can know they will in fact print correctly?
    PS - Peter - thanks for the super quick response! And I saw your the highlighted "Exceptional Contributor" on the right sidebar for the InDesign forum - clearly well-deserved! Congrats

  • How to add a related content for a particular document in UCM

    Hi All
    How to add a related content for a particular document in UCM. On which table it stores all the related document details. Can anyone suggest me a document which helps me to know how to add related contents for a document
    With thanks and regards
    Anoop

    I believe there is a PDF doc which comes with the component (it should be at your harddrive when you install it), which describes everything you will need.
    In a nutshell, there are two types of relationship: sibling - sibling, parent - child (there are some more nuances, but it follows the same logic).
    A relationship is created between two existing items (not sure, if you can also create a relationship for a new checked in item, but it would be just a usability). You select the type of relationship and the item - I believe depending on the relationship you may start from either item. The dialog to start is INFO (display metadata) or UPDATE (update metadata).
    When a relationship is created you may watch it also from either end (again INFO is the starting point).
    It is quite self-explanatory, so if you have the component installed you may just play around with it for a while and that is it.

  • Firefox and Thunderbird creates CGLog files in /tmp on my Mac. It contains a lot of info related to keyboard and mouse (keys, scrolls, clicks!) I am concerned!

    These files mostly contains following lines:
    Firefox and Thunderbird creates CGLog files in /tmp on my Mac. It contains a lot of info related to keyboard and mouse (keys, scrolls, clicks!) I am concerned!
    --- flushing event log at XXXX.XXXXXXXX ---
    432138.5090574 (Firefox): CGSGetNextEventRecordInternal: XXXX.XXXXXX loc (-XXXX, XXXX) conn 0xXXXXX MouseMoved win 0xXXXX (click 1)
    and the most scaring:
    XXXX.XXXXX (Firefox): CGSGetNextEventRecordInternal: XXXX.XXXXX loc (xxx.xx, xxx.xx) conn 0xXXX KeyDown win 0x0 flags 0xa00100 set 252 char 63233; key 125 data -2303 special 0 repeat 0 keybd 44
    Why it happens? Is it dangerous? How can I turn it off?
    I saw that on the latest Firefox release for Mac and on Firefox ESR 31.2.0 for Mac
    I saw that on Thunderbird release for Mac 31.2.0

    You can start with this;
    '''[https://support.mozilla.org/en-US/forums/support-forum-contributors/710576 Possible Mal-Ware Scan For Macs]''' {web link}

  • How to find Tcodes related to a particular user

    How to find Tcodes related to a particular user

    >
    P734000 wrote:
    > do we have any table to check the tcodes which were created by a particular user.
    Hello,
    I donot think SAP maintains this info
    @Max: I think t-code you gave is the same when i use SUIM --> TRxns --> "Executable for User"
    BR,
    Suhas

  • How to find Info objects for particular filed??

    Hi
    I hav doubt Can anyone tel me???
    My Query s <b>How to find Info objects for particular filed??</b>
    For example i hav some table fileds, how to find Info objects for that fields??
    Pls explain me detaily
    Points wil be given for all answers.
    Thanks
    Senthil

    Hi Senthil ,
    You have your field description along with your Field right.
    For example:MATNR - Material Number
    Now take this description and go to your BW side Tcode:RSA1
    1)Search in Modelling >> Infoobjects >> Material Number
    Then you get few hits (matches)  which have description matched.
    For Example: 0material  - Material Number
    Check for the Length and type match.
    You will understand once you get those hits as to which is related to yours.
    2)Go to BI content and search in the infoobjects this has all active and inactive objects but this takes a little time (not much  though).
    3) You have meta data search / simple search also where you can search for the objects with field description as matching criteria.
    Hope your doubt is cleared atleast to some extent.
    Assign Points if helpful.
    Thanks,
    Priyanka

  • Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?

    Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.

    Hi Jay,
    SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
    SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
    once on each server, and then the variable can be used by all the packages on this server.
    Regards,
    Mike Yin
    TechNet Community Support

  • I have a new MacAir and don't know how to get info from my USB stick and my SD photo card.  Can anyone help me please?

    I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card.  Can anyone help, please?

    Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
    Matt

  • How to create a relational view base on an xmltype table which included sev

    Hi,
    I am using oracle 11.2.0.1.0.
    how to create a relational view base on an xmltype table which content several different .xml files?
    Thanks.
    for examle:
    SQL> SELECT OBJECT_VALUE FROM document;
    Edited by: Cow on Jan 6, 2011 7:57 PM

    For example I already have these three xml files inserted into the document xmltype table.
    These xml files have same schemas. I have attached below.
    I want to show all elements/attribute values in xml files to relational view.
    Is this possible to create one big relational view to show everything
    or I have to create three separate relation views then use UNION to put together? Thanks a lot. Cow
    <?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet href="http://www.accessdata.fda.gov/spl/stylesheet/spl.xsl" type="text/xsl"?>
    <document xmlns="urn:hl7-org:v3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:hl7-org:v3 http://localhost:8080/home/DEV/xsd/spl.xsd">
    <id root="5ca4e3cb-7298-4948-8cc2-58e71ad32694"/>
    </component>
    </document>
    <?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet href="http://www.accessdata.fda.gov/spl/stylesheet/spl.xsl" type="text/xsl"?>
    <document xmlns="urn:hl7-org:v3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:hl7-org:v3 http://localhost:8080/home/DEV/xsd/spl.xsd">
    </component>
    </document>
    Edited by: Cow on Jan 4, 2011 9:51 AM

  • How to save info in a meta-data of a jpg file?

    hi, i need to know how to save info in a meta-data of a jpg file:
    this is my code (doesn't work):
    i get an exception,
    javax.imageio.metadata.IIOInvalidTreeException: JPEGvariety and markerSequence nodes must be present
    at com.sun.imageio.plugins.jpeg.JPEGMetadata.mergeNativeTree(JPEGMetadata.java:1088)
    at com.sun.imageio.plugins.jpeg.JPEGMetadata.mergeTree(JPEGMetadata.java:1061)
    at playaround.IIOMetaDataWriter.run(IIOMetaDataWriter.java:59)
    at playaround.Main.main(Main.java:14)
    package playaround;
    import java.io.*;
    import java.util.Iterator;
    import java.util.Locale;
    import javax.imageio.*;
    import javax.imageio.metadata.IIOMetadata;
    import javax.imageio.metadata.IIOMetadataNode;
    import javax.imageio.plugins.jpeg.JPEGImageWriteParam;
    import javax.imageio.stream.*;
    import org.w3c.dom.*;
    public class IIOMetaDataWriter {
    public static void run(String[] args) throws IOException{
    try {
    File f = new File("C:/images.jpg");
    ImageInputStream ios = ImageIO.createImageInputStream(f);
    Iterator readers = ImageIO.getImageReaders(ios);
    ImageReader reader = (ImageReader) readers.next();
    reader.setInput(ImageIO.createImageInputStream(f));
    ImageWriter writer = ImageIO.getImageWriter(reader);
    writer.setOutput(ImageIO.createImageOutputStream(f));
    JPEGImageWriteParam param = new JPEGImageWriteParam(Locale.getDefault());
    IIOMetadata metaData = writer.getDefaultStreamMetadata(param);
    String MetadataFormatName = metaData.getNativeMetadataFormatName();
    IIOMetadataNode root = (IIOMetadataNode)metaData.getAsTree(MetadataFormatName);
    IIOMetadataNode markerSequence = getChildNode(root, "markerSequence");
    if (markerSequence == null) {
    markerSequence = new IIOMetadataNode("JPEGvariety");
    root.appendChild(markerSequence);
    IIOMetadataNode jv = getChildNode(root, "JPEGvariety");
    if (jv == null) {
    jv = new IIOMetadataNode("JPEGvariety");
    root.appendChild(jv);
    IIOMetadataNode child = getChildNode(jv, "myNode");
    if (child == null) {
    child = new IIOMetadataNode("myNode");
    jv.appendChild(child);
    child.setAttribute("myAttName", "myAttValue");
    metaData.mergeTree(MetadataFormatName, root);
    catch (Throwable t){
    t.printStackTrace();
    protected static IIOMetadataNode getChildNode(Node n, String name) {
    NodeList nodes = n.getChildNodes();
    for (int i = 0; i < nodes.getLength(); i++) {
    Node child = nodes.item(i);
    if (name.equals(child.getNodeName())) {
    return (IIOMetadataNode)child;
    return null;
    static void displayMetadata(Node node, int level) {
    indent(level); // emit open tag
    System.out.print("<" + node.getNodeName());
    NamedNodeMap map = node.getAttributes();
    if (map != null) { // print attribute values
    int length = map.getLength();
    for (int i = 0; i < length; i++) {
    Node attr = map.item(i);
    System.out.print(" " + attr.getNodeName() +
    "=\"" + attr.getNodeValue() + "\"");
    Node child = node.getFirstChild();
    if (child != null) {
    System.out.println(">"); // close current tag
    while (child != null) { // emit child tags recursively
    displayMetadata(child, level + 1);
    child = child.getNextSibling();
    indent(level); // emit close tag
    System.out.println("</" + node.getNodeName() + ">");
    } else {
    System.out.println("/>");
    static void indent(int level) {
    for (int i = 0; i < level; i++) {
    System.out.print(" ");
    }

    Hi,
    Yes, you need store data to table, and fetch it when page is opened.
    Simple way is create table with few columns and e.g. with CLOB column and then create form based on that table.
    Then modify item types as you like, e.g. use HTML editor for CLOB column
    Regards,
    Jari

Maybe you are looking for