How to download USB controleler driver for my VAIO

hello everyone,I would like to download for my VAIO usb controllers.The model listed in the BIOS is VPCEB4C5E but this model is not listed in the site supporting Sony.7And so I 'm stuck.Who could help me ?

 
Hi stanis_stanis, 
Thank you for visiting Sony Community! 
From what website you were trying to download the USB controller driver? Is it from eSupport.sony.com? Your Vaio VPCEB4C5E is not a U.S. model and we have limited information about your unit. eSupport site is for U.S. customers only. We do not have the drivers and software for your computer. We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/. 
Hope the link helps. 
Regards,
Vincent 
If my post answers your question, please mark it as "Accept as Solution"
 

Similar Messages

  • How to download the LAN driver for Satellite A100 PSAA8E

    Can anyone help how to download the LAN driver for my machine. I found three LAN drivers but unable to download them from the toshiba europe website.
    Thank you

    > Whats the problem???
    > I found on the Toshiba European site different driver
    > version for different OSs.
    > You have to download the compatible one. If you use
    > XP choose the newest version for XP OS and if you use
    > XP MCE or Vista choose another one.
    >
    > Thats all.
    I am unable to find a compatible LAN driver for an XP OS. Can you tell me where exactly to look for this

  • How to download iphone 4 driver for windows 8

    how to download a driver of iphone 4 for windows 8 ???

    Driver for what?
    Everything you need is installed when you install iTunes.

  • How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

    Hi,
    I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
    "Windows Embedded CE 6.0 USB camera Driver" downloaded from:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
    does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
    image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
    the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
    ("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should 
    be in C# but C++ will be fine also.
    Thanks,
       Paul

    i get this on the hyperterminal when i run the cameradshowapp.exe
    Compulab Windows CE NAND X-Loader for CM-T35                                           
    Built Dec 20 2009 at 16:48:16                            
    Version 1.01.222               
    Commit Date 16/12/09                   
    Jumping to bootloader                    
    Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:                                                                               
    46:16    
    INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b                                                    
    Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10                                                                           
    Version 1.01.222               
    OMAP3430 Version 0x4b7ae02f (Unknown)                                    
    TPS659XX Version 0x10 (ES2.x)                            
    -OEMPinMuxSetup....                  
    System ready!            
    Preparing for download...                        
    INFO: Predownload               
    +FMD_Init        
    Checking bootloader blocks are marked as reserved (Num = 6)                                                          
    +FMD_Init        
    WARN: Boot config wasn't found, using defaults                                             
    +FMD_Init        
    OALFlashStoreOpen: 4096 blocks, 64 sectors/block                                               
    OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks                                                       
    Calling LCD_TurnOn                 
    +FMD_Init        
    +FMD_Init        
    BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua                                                                               
    l size =0x4d3a!!!                
    Hit space to enter configuration menu 5...                                         
    Hit space to enter configuration menu 4...                                         
    Hit space to enter configuration menu 3...                                         
    Hit space to enter configuration menu 2...                                         
    Hit space to enter configuration menu 1...                                         
    INFO: Boot Device location = 0x8000020                                     
    Load NK image from flash memory                              
    +FMD_Init        
    ROMHDR (pTOC = 0x823b8c28) ---------------------                                               
      DLL First           : 0x4001c001                                 
      DLL Last            : 0x41c7c0d8                                 
      Physical First      : 0x84001000                                 
      Physical Last       : 0x863bbdec                                 
      Num Modules         :        294                                 
      RAM Start           : 0x863c0000                                 
      RAM Free            : 0x863d5000                                 
      RAM End             : 0x90800000                                 
      Num Copy Entries                        
      Copy Entries Offset : 0x85256e38                                 
      Prof Symbol Length  : 0x00000000                                 
      Prof Symbol Offset  : 0x00000000                                 
      Num Files           :        116                                 
      Kernel Flags        : 0x00000002                                 
      FileSys RAM Percent : 0x00000020                                 
      Driver Glob Start   : 0x00000000                                 
      Driver Glob Length  : 0x00000000                                 
      CPU                 :     0x01c2                                 
      MiscFlags           :     0x0002                                 
      Extensions          : 0x84002020                                 
      Tracking Mem Start  : 0x00000000                                 
      Tracking Mem Length : 0x00000000                                 
    NK Image Loaded            
    Launch Windows CE image by jumping to 0x80001000...                                                  
    Windows CE Kernel for ARM (Thumb Enabled) Built on Apr  5 2011 at 17:47:22                                                                         
    +OEMInit       
    ýSETDATAOUT access is OK....                           
    Forcing clean boot                 
    MainMemoryEndAddress = 0x90800000                                
    -OEMInit       
    +FMD_Init        
    Dumping registry defined VK                          
    Row 0:  0x18    0x9     0x25    0x0     0x0     0x0                                                  
    Row 1:  0x26    0xd     0x28    0x0     0x0     0x0                                                  
    Row 2:  0x27    0x24    0x23    0x0     0x0     0x0                                                  
    Row 3:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    Row 4:  0x0     0x0     0x0     0x0     0x0                                             
    Row 5:  0x0     0x0     0x0     0x0     0x0     0x0                                                  
    SMSC922x: Core Ethernet Init.                            
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:0a:a0:db                                        
    Lan9220 identified. ID_REV = 0x92200000                                      
    SMSC922x: MAC address = 00:01:c0:09:88:80                                        
    SDIO8686: Loading Driver [version = 38.p44]                                          
    SDIO8686: Reset with TPS GPIO 2 --> done                                       
    !!!Kernel mode PSL 'PRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'HRdr' de-registered!!!                                         
    !!!Kernel mode PSL 'FRdr' de-registered!!!                                         
    EHCI USB Host: HcdPdd_Init+                          
    [OTG] OMAPMHSUSBOTG::Init()+                           
    OMAPMHSUSBOTG::PostInit(): Start.                                
    DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52                                                                   
    Display parameters:                  
            Height = 0x280                     
            Width = 0x1e0
            HSW = 0x20
            HFP = 0x8
            HBP = 0x17
            VSW = 0x1
            VFP = 0x4
            VBP = 0x3
            DVI is not enabled
            PixelClkDiv = 0x7
            LogClkDiv = 0x1
            ClkSelDSS = 0x5
    TD035:: LCDTurnOn
    TD035STEE1: Turned display on.
    TD035:: Finished LCD VGA init
    AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
    Can't open HKEY_LOCAL_MACHINE\Startup key.
    [WiFi]: Firmware Version: 9.70.3.23
    CCaptureFramework: Failed setting up the camera data.
    CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
    eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
    CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
     camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
    eFramework: Retrieving the still stream config failed.
    CameraDShowApp: Initializing the capture graph failed.

  • S400 usb 3 driver for Windows 8

    Hi Guys,
     i was wondering if you could point me to a link for USB 3 Driver for the lenovo S400 for Windows 8?
    I can't find it on the download link on the support page. Thank You.

    Hi
    Welcome To Lenovo Community
    USB 3.0 drivers are actually not required for windows 8 as it will be automatically identified
    If you wish you may try the following drivers  Intel USB 3.0 Driver
    Do give this a try and let us know  
    Hope This Helps
    Cheers!!!
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
                            English Community   Deutsche Community   Comunidad en Español

  • CPU is very hot when using Thunderbolt display and mac attached USB hard drive for TimeMachine

    Hello,
    i've bought the new MacBook Pro 15" and a Thunderbolt display. Everything works fine for me due to the latest updates, but i experience an issue which i really don't understand. When i connect an usb hard drive for TimeMachine to my display it works like expected (CPU has a temperature of 64°C), but when i connect it to an usb port of the mac while using my display the CPU temperature goes crazy (spikes about 80°C) and it gets very noisy. Has anyone else experienced this behaviour?
    May this has something to do with the dual graphics adapter and how the system handles the data stream to thunderbold ports and usb devices? Which graphics card is used for the external display, the internal gpu or the adapter from ati? I've googled a lot but haven't found appropriet answers about these questions.

    Hi there ulairi9!
    I understand how this would be a frustrating issue! I have an article here that can provide some troubleshooting steps for you, and can hopefully help you resolve the issue. That article specifically addresses the issue you are experiencing, and can be found here:
    AirPort Extreme and Time Capsule: External USB drive becomes inaccessible
    http://support.apple.com/kb/TS3271
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • How to detect USB Flash Drive name in LabVIEW

    Hi there
    I was looking for how to detect a USB Flash Drive name in Labview
    appearently every time i insert USB Flash Drive in a computer, windows assign it a different name
    once "J:" and sometimes "M:"
    Is there anyway to obtain USB Flash Drive name programmatically in Labview ?
    Because in my program an user shouldn't be able to access HDD Drives except his USB Flash Drive (for inserting some file ...)
    thank you and excuse me for my poor english 

    I was able to get the demo.vi to load, but it could not load the other two because there is no block diagram associated with those.  I'm not sure why this is.  I haven't had any issues with other llbs before.
    Reese, (former CLAD, future CLD)
    Some people call me the Space Cowboy!
    Some call me the gangster of love.
    Some people call me MoReese!
    ...I'm right here baby, right here, right here, right here at home

  • How to download mt6225 devise driver software

    How to download mt6225 devise driver software for iphone 4s

    Deleting the apple.com.printing preference files in /<home>/Library/Printers should help too, after you get the software installed. This thread sounds like the problem you were running into:
    http://discussions.apple.com/thread.jspa?messageID=7727825#7727825

  • USB super drive for a MacPro retina. It recognizes CDs but not DVDs.

    I bought a new USB super drive for a MacPro retina. It recognizes CDs but not DVDs. I am in region 1 and my DVDs are all region 1. This is the second drive so the problem seems to be in the computer. The problem is the same with battery power or AC adaptor. I  downloaded Adobe flash before I bought the USD super drive. Could this be the problem? Any suggestions? Thanks.

    MBP refers to Macbook Pro
    Do the DVD spit out right away? (indicates a bad loader mech)
    OR do the DVD spit out after several seconds (indicates a dirty laser diode lens) ?

  • Can I use a usb thumb drive for Time Machine?

    Can I use a usb thumb drive for Time Machine backups?

    Hello,
    Yes you can use a (large) thumb drive. The most common format for a Time Machine backup drive is Mac OS Extended (Journaled).
    Hope this will help.

  • Where can I download adobe postscript driver for autocad 2006 so I can print in .pdf?

    Where can I download adobe postscript driver for autocad 2006 so I can print in .pdf?

    Hi,
    Adobe Postscript printer driver can be installed from Windows 7 for example as blow:
    1. Select Start >Devices and Printers > Add Printers
    2. Select "Add a local printer" and click "Next" button
    3. Select "Use an existing local port: LPT 1(Printer port)" and click "Next" button
    4. Select Xerox from Manufature section then select Xerox Phaser xxxxx PS printer
    Hisami

  • Where can I download the ODBC driver for Oracle 10g XE?

    where can I download the ODBC driver for Oracle 10g XE?
    I need the ODBC drivers for windows 7 x64, I installed Oracle Database 10g Express Edition, the use and connects with RazorSQL well, I just want to make a connection THROUGH ConnectionString language using the ODBC driver

    already checked these http://www.connectionstrings.com/oracle, I need Help Please.

  • HT1338 How do I install a driver for the speakers I have connected to the headphone jack?

    How do you install a driver for speakers I have connected to the headphone jack?

    You don't need drivers for speakers in a headphone jack.
    What is the problem?

  • How to erase USB flash drives?? Thanks, Michael

    How to erase USB flash drives on my MacBookAir ?? Thanks, Michael

    Welcome to Apple Support Communities
    To erase them, you can use Disk Utility, in /Applications/Utilities > http://pondini.org/OSX/DU1.html
    When you open Disk Utility, choose the external disk in the sidebar, go to Erase tab and erase the disk

  • How to download drivers and software for hp pavilion dv6-3127tx . product unable to search

    How to download software and drivers for HP Pavilion dv6-3127TX. Unable to search the product in help and support center.
    Mohan Singh

    Hi,
    I can't find a listing for this model either, but you should find the drivers available on the link below work.
    http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4331848&lang=en&cc=us...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for