How to draw centre line with white background?

Hi,
I need to draw a centre line with white background on it. Now i'm doing it by pasting the main line in the background and giving it white so that it shows a white backgound. Is there a way to do just by drawing like normal lines. If we can, is it possible to control the white backgound only to show less than the original line in both ends. This is for illustrations i do for exploding views and i need to draw this line to show it as assembly drawing.
Thanks
Manoj

1. Draw a white line segment of desired width (stroke weight) with round cap (Stroke panel) for the background line.
2. Copy, Paste in Front
3. Change to desired foreground color, butt cap, reduce stroke weight.
4. Opt/Alt–drag foreground segment to overhang background segment by desired amount on both ends.
5. Select both segments and drag to Brushes panel, choose Art Brush.
6. In Art Brush Options choose Stretch Between Guides, drag guides somewhere to the inside of curve of round caps. (If in step 3 you chose black, set Colorization Method to Tints. Then you can select any color for the foreground segment by setting the stroke color.) Name the brush as you choose. Click OK.
7. Draw any path and apply the brush.

Similar Messages

  • How to draw a line with arrow head

    Hi,
    I have an application where i need to connect different
    components by line. I am able to connect the components by line but
    i dont know how i can add arrow to the line head or one end of
    line. When i drag line from a souce component to destination the
    line end at destination must have a pointed head i.e arrow.
    If any one have solution please reply..
    Thank you.

    Hi,
    I have an application where i need to connect different
    components by line. I am able to connect the components by line but
    i dont know how i can add arrow to the line head or one end of
    line. When i drag line from a souce component to destination the
    line end at destination must have a pointed head i.e arrow.
    If any one have solution please reply..
    Thank you.

  • How to draw a box with transparent background ?

    Hi there,
    I want to do an effect where after I display the text, there will be drawing effect where it draws a rectangle around the text ?
    During the days of Final Cut Express, I bought plugins from LiveType, it has effects to do this.
    But dow to I do this now in FCPX ?
    Thanks

    Thanks Jim,
    It is a good tips that LiveType still works on Maverick !
    Now I gotta ransack my store room to look out for the LiveType dvd/disc ...
    Motion ? I thought Motion is very difficult to learn ... more difficult than After Effects ?
    Ok, i better look out for some tutorials on Motion then ... Motion can integrate with FCPX ?
    I just checked, the Motion that I have is Ver 5.0.7 (got this as a birthday gift). Is this compatible with Maverick ?
    Thnaks
    Jim Wanamaker wrote:
    A couple of thoughts. Livetype still works in Mavericks although I don't know about your plugins. You would have to try them. Obviously you can not send a livetype project to FCP X, but you could design your title and export it and then import to FCP X. That should work although you couldn't make any changes in FCP X. A second thought is to use Motion if you have it. You can easily create a title in Motion to do what you want by opening a title template, add and format text. Then add a bezier shape for your rectangle and use the write on behavior. Very simple to do.

  • How to draw a globe with lines of lattitude and longitude?

    I'm using CS4 on a Mac.
    Can anyone tell me how to draw a globe with a grid? I need 7 lines of latitude and 40 lines of longitude (i.e. separated by 9 degrees). I would like to have each segment of the grid defined as shape so I can fill each one with a different color.

    Maybe this way can help.....

  • How to draw a table with vertical&horizental lines inSAP-Standard script.

    actuvally my requirement is to place a table in script , if not possible is any posibilitie to draw a table using a vertical lines and horiental lines, if possible can u help me out, and if any sample code r any screen shot u have plz share with me....
    Message was edited by:
            phani kumar

    Hi,
    If have understood your problem correctly , you want to draw a table using script.
    You can refer this link which provides code for <b>drawing vector lines with javascript</b>
    http://www.thescripts.com/forum/thread88771.html
    Next u can also visit
    http://www.walterzorn.com/jsgraphics/jsgraphics_e.htm
    This link contains code for <b>Drawing Table borders using JavaScript</b>
    http://forums.devshed.com/javascript-development-115/drawing-table-borders-using-javascript-44376.html
    Hope any one of them will help you.

  • How to draw this line

    I want to draw a link like this, how can I do it. I've been struggling for ages.
    this here is just a seriers or 5 pixel lines which I know isn't the right way

    Here is how you can make those black lines easily with the polygonal lasso tool:
    1. Start with a blank document with white background
    2. From the tool bar, select Polygonal Lasso Tool
    3. On your blank document, click to make the points that form the four corners of your desired shape. Press enter or click on the first point to close your selection.
    4. From the tool bar on the side, select Paint Bucket Tool
    5. In the lower left corner of the tool bar, click on the colored box. Choose the color black from color picker.
    6. Now click once in your rectangular selection, she shape is filled with black.
    Repeat all the steps if necessary to make more black lines. This is just one of the many ways to achieve the same result. Hope this helps!

  • How to draw horizontal line in smartform after end of the all line items

    Hi Friends,
    I am working on the smartform. I have created TABLE node in Main window.
    i want to draw a horizontal line after end of the main window table node. i mean after printing all the line items of the table, I need to print one horizontal line.
    Could you please help me how to resolve this issue.
    FYI: I tried with the below two options. But no use.
    1. desinged footer area in the table node of the main window.
    2. tried with uline and system symbols.
    please correct me if i am wrong. please explain in detail how to draw horizontal line after end of the main window table.
    this is very urgent.
    Thanks in advance
    Regards
    Raghu

    Hello Valter Oliveira,
    Thanks for your answer. But I need some more detail about blank line text. i.e thrid point.
    Could you please tell me how to insert blank line text.
    1 - in your table, create a line type with only one column, with the same width of the table
    2 - in table painter, create a line under the line type
    3 - insert a blank line text in the footer section with the line type you have created.

  • Photo template with white background #ffffff appears gray online, using Photoshop CS5.

    Aloha! I am stumped with this and need your help.
    Here's what I want to do: Create a seamless white border around my photo on a white background (blog post area is white). I am using Photoshop CS5.
    I've tried saving the file as PNG, GIF, and JPG but all appear as gray in the area I want as white.
    Photo below is how my image appears on a white background. The area surrounding the photo and behind the word "example" is the gray area that is white #ffffff on PS but appears otherwise when posted online (my blog on Blogger).
    The top image is a PNG file, the bottom is a GIF. The GIF is slightly better but still gray. I would like the surrounding area to be pure white so it just blends into the white background (post area).
    This is the image I see on PS, it is white in the areas surrounding the center photo, this is how I intend the final image to look like:
    I've even chosen my background (while creating a new document) as white for the background color. I've even tried a transparent background but all that did was make it worse and turn the transparent background to black when I post the image online.
    Here's a screen capture of my layers (not sure if this info is necessary but I do need help).
    If anyone would like to help me with this I'd really appreciate your assistance.  Thank you so much!!

    Mylenium, I went back in and took screen shots of what I found according to your article. I finally found color settings.
    And as for "view", I couldn't find this part in your article: View--Proof Setup enable Monitor RGB and make sure Proof Colors is enabled."
    This is a capture of what I find:
    Where do I check off under Proof Setup?
    Thanks again!

  • I created a photo book in Photoshop elements 11 that contains png files with the invisible backgrounds.  When I export the book to a jpg or a pdf, the png files appear with white backgrounds.

    I created a photo book in Photoshop elements 11 that contains png files with the invisible backgrounds.  When I export the book to a jpg or a pdf, the png files appear with white backgrounds.  Any suggestions on how to fix this? 

    jpg and pdf formats don't support transparency. You need to use a format such as tif, png or psd that does.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • How to draw a line using JSP?

    Does anyone know how to draw a line using a JSP? Any help is much appreciated.
    Regards,
    Navin Pathuru.

    Graphics classes are useless in JSP files; you can only output HTML tags to the client browser.
    You should be able to give just about any presentation look that you need with HTML and CSS. Have you played with styles? Here's a simple example that works in IE 5+ and Netscape 4.7:
    <HTML>
    <HEAD>
    <STYLE>
    .box {
    border-style:solid;
    border-color:black;
    border-right-width: 1px;
    border-top-width: 1px;
    border-left-width: 1px;
    border-bottom-width: 1px;
    .line {
    border-right-width: 1px;
    border-top-width: 0px;
    border-left-width: 0px;
    border-bottom-width: 0px;
    border-style: solid;
    border-color: red;
    width:1pt;
    height:100%;
    </STYLE>
    </HEAD>
    <BODY>
    <TABLE CELLPADDING=1 CELLSPACING=0 WIDTH=100>
    <TR><TD ALIGN=CENTER><SPAN CLASS="box">Field One</SPAN></TD></TR>
    <TR HEIGHT=50><TD ALIGN=CENTER><SPAN CLASS="line">�</SPAN></TD></TR>
    <TR><TD ALIGN=CENTER><SPAN CLASS="box">Field Two</SPAN></TD></TR>
    <TR HEIGHT=50><TD ALIGN=CENTER WIDTH=50%><SPAN CLASS="line">�</SPAN></TD></TR>
    <TR><TD ALIGN=CENTER><SPAN CLASS="box">Field Three</SPAN></TD></TR>
    </TABLE>
    </BODY>
    </HTML>
    Have fun!

  • How to draw a line???

    I am a long time Photoshop user, but new to "Elements". I cannot figure out how to draw a line??? The Help says "To draw a line or arrow...... 1. In the Editor, select the Line tool." Ummm.....WHERE??? HOW??? If I knew how to select the Line tool I wouldn't have gone to the Help file.
    Where is the "Editor"?? All I see at the top in the "Rectangular Marquee Tool" and the "Elliptical Marquee Tool" .....I see no Line tool on the left (where it used to be in PhotoShop) or on the top.
    Jeff

    Jeff,
    I use PEv.3. The line tool is accessed via the shape selection tool.
    Click U. Hold the shift key as you drag and you will have a straight line.
    Editor refers to the component of Elements utilized for enhancement and manipulation. Organizer in the Win version deals with storage and structured organization, as well as special projects.
    Ken

  • How to draw a line on chart

    Hi all,
    I am working on a chart in Design studio on BI platform. The following screen
    shot will depict the current state of my chart-
    Now
    I need to draw lines of different lengths and colors with certain distance from
    X-axis, as shown below. (I drew those lines on a screen shot of my chart with
    the help of MS paint
    but
    I need to do this with the help of design studio) . Basically I need help to
    get the following output in design studio. So, question is HOW TO DRAW A LINE
    IN DESIGN STUDIO?
    Kindly,
    help with this.
    Please suggest me to get the output.
    Thanks and Regards.
    Rakesh.

    Hi Tammy,
    Thanks for ur reply.
    I'm using DS 1.3. and no need of dynamic changes of line on chart.
    I just now gone through with CSS, but i didnt get the solution. i think somewhere im getting stuck with CSS.
    Can u please suggest me the step by step procedure to draw a line using CSS.
    Kindly help on this.
    Thanks and Regards,
    Rakesh

  • How to draw horizontal line at the end of table for multiple line items

    Dear Experts,
                       Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
    Thanks
    Ramesh Manoharan

    Hi
       I tried as per your logic but it is not solving my problem .  when i am gone to table painter it is showing line type 1 and line type 2
      is below format.. if u see here line type 1 bottom line and line type 2 top line both are same..  so how to avoid this ?
                              line type 1
                             line type 2

  • Print 3D PDF document with white background

    Hi!
    Is it possible to print a view from 3D PDF document with white background?
    I could not find any possibilty to change the grey background color, neither in the standard preferences nor in the print options...
    Thanks for your help!
    Kind regards,
    Mark

    Hi,
    As you experienced all DIALOG function modules will not work in Batch because the is no connection with a frontend (PC).
    You have to get your PDF on a server so you can process them in Batch.
    Maybe you can than use the FM: ALINK_DOCUMENTS_CREATE_FILE
    Success,
    Rob

  • PNGs showing up with white backgrounds

    Hello.
    This is very odd as this has never happened to any of my other files that use the same buttons. My pngs that are saved with transparent backgrounds are now showing up with white backgrounds. They also only show up with white backgrounds when you do one of the following:
    Press F8 to preview the file
    Publish the file
    Has anyone else ever had a similar experience and/or figured out a solution? I have searched the discussion board for similiar experiences...I found one...http://forums.adobe.com/thread/86092. I'm going to play around with "interlace" in Photoshop so I'll keep my fingers crossed. I have also ensured my graphics are smaller than the background--one graphic is an 8kb file and the other is a 13kb file and my background is 112 kb.
    Any solutions and/or thoughts are greatly appreciated.

    hello nyartist, this has nothing to do with quirks mode - it's just the default way that standalone image files are displayed in firefox...
    https://msujaws.wordpress.com/2012/01/04/blinded-by-the-light-an-improved-image-viewing-experience-in-firefox/

Maybe you are looking for

  • Downpayment request- error

    Dear frnds,                         I have created a sales order (billing plan) from which i directly create the down payment request. I am able to save the same but when i try to go bacak to the document it gives me the follwoing error  "Maintain de

  • Valuation view assign to Group, Legal, Profit center currencies

    Hi all, What i understood the valuation means. it views the business transaction in different ways and it will be assigned based on client requirements. My question is: Currently, i am using two different valuation i.e, Group and legal valuation and

  • HR-PY: How To Deduct Time Wage Type Amount From Salary?

    Dear All, How to deduct a time wage type amount from the total gross? Now I have a time wage type, "Unpaid Leave". If an employee have an unpaid leave in a month, payroll will calculate the unpaid amount and put it into Wage Type "Unpaid Leave", and

  • FOR ALL ENTRIES IN  comando doesent work !!!

    Dear all, I have here a problem with my select. I dont know why it doesent work. In the table gt_struc1 I have 2 entries. This entries are also in BSAD availible. belnr bukrs gjahr are the same in  gt_struc1 and in BSAD TYPES: BEGIN OF ts_struc1,    

  • Date Stamp Issues - Calculate Read only

    I want to use a date stamp with the current date that a form was printed.  I was able to get this to work on one form I created from a Word Doc., so that the field only shows when printing and auto calcs the current date.  I however can not replicate