How to dynamically set Min count and Max Count values in Adobe Print Form?

How to set the Min Count and Max Count values dynamically in a Print Form?
The values when set should over ride the values set in Binding Tab.
This is all needed to print multiple Material Number labels on a single page - and the number of labels to be printed needs to be under user control - something like an Avery Address labels
Please advise.
Thanks,

Here is a work around that works for me and may not be an intelligent solution .
I kept the Min Count to 1 on the subform binding properties.
Per the number of labels required, I appended the same item to the internal table so many times and passed it to the label.
it works fine for my requirement.
However - leaving out the post for a while to see if this can be done at the form level via scripting.
Thanks,

Similar Messages

  • How do you set default fonts and default text box sizes on bound form fields?

    I am using an existing PDF as a template to build my form in designer.
    I am dragging my objects from the schema window to the form and when I drop it on the form it is way too big - so for every field I do this with I am left to resize and reset the font to every bound object i drop on the page!
    Is there a way to set the default font and the default dimensions of the bound text boxes I am droping on the PDF form page?
    Thanks to anyone who can help!

    iWork '09 DVD set (containing Pages '09 v4.0, Numbers '09 v2.0, and Keynote '09 v5.0) is available from Amazon for USD $20. Apple no longer provides retail store, or OS X App Store downloads. You will need to apply the Apple iWork 9.3 updater afterwards to bring these applications to their n.3 (e.g. Pages '09 v4.3) last versions. You will have an /Applications/iWork '09 folder afterwards.
    I would also launch /Applications/Utilities/Disk Utilities, select your boot drive, and verify/repair permissions — just to be on the safe side for the newly added iWork '09 applicaitons.

  • How to find the max session count and process count for a database

    Hi All,
    How to find the maximum session count and process count reached for a database over a period of 15 days?
    DB version:11.2.0.2
    OS:AIX

    Thanks for the link.
    The output of the below query that is given in the link shows the results for the last 10 or 12 days.. Is there a query which gives a result for the last 30 days?
    col metric_unit for a30
    set pagesize 100
    Select trunc(end_time),max(maxval) as Maximum_Value,metric_unit
    from dba_hist_sysmetric_summary
    where metric_id in ( 2118,2119) group by trunc(end_time),metric_unit order by 1;

  • How to retrieve Min(startDate) and Max(endDate) for different groups of data? (sql server 2000)

    My sample dataset (below) contains 3 groups -- 'a', 'b', 'c'.  I need to retrieve the Min(startDate) and Max(EndDate) for each group so that the output looks something like this (date format not an issue):
    fk   minStart       maxEnd
    a    1/13/1985    12/31/2003
    b    2/14/1986    12/31/2003
    c    4/26/1987    12/31/2002
    What is the Tsql to perform this type of operation?  Note:  the actual data resides in a sql server 2000 DB.  If the Tsql is different between version 2000 and the later versions -- I would be grateful for both versions of the Tsql
    --I noticed that multiple lines of Insert values doesn't work in Sql Server 2000 -- this sample is in Sql Server 2008
    create table #tmp2(rowID int Identity(1,1), fk varchar(1), startDate datetime, endDate datetime)
    insert into #tmp2
    values
    ('a', '1/13/1985', '12/31/1999'),
    ('a', '3/17/1992', '12/31/1997'),
    ('a', '4/21/1987', '12/31/2003'),
    ('b', '2/14/1986', '12/31/2003'),
    ('b', '5/30/1993', '12/31/2001'),
    ('b', '6/15/1994', '12/31/2003'),
    ('b', '7/7/2001', '12/31/2003'),
    ('c', '4/26/1987', '12/31/1991'),
    ('c', '8/14/1992', '12/31/1998'),
    ('c', '9/10/1995', '12/31/2002'),
    ('c', '10/9/1996', '12/31/2000')
    Thanks
    Rich P

    Rich
    It is unclear what you are trying to achieve, you said that it is SQL Server 2000 but provide a sample data with SQL Server 2008 syntax
    Is it possible to use UNION ALL for your queries to make its one 
    select * from
    select * from #tmp2 t1 where exists
    (select * from (select top 1 * from #tmp2 t2 where t2.fk = t1.fk order by t2.startdate) x where x.rowID = t1.rowID)
    UNION ALL
    select * from #tmp2 t1 where exists
    (select * from (select top 1 * from #tmp2 t2 where t2.fk = t1.fk order by t2.Enddate desc) x where x.rowID = t1.rowID)
     as  der order by fk
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • How to dynamically set column name in Answers

    Hi.
    How to dynamically set column name in Answers, for example I want to put presentation variable in column header. Is this possible?
    Regards,
    Goran Ocko
    http://108obiee.blogspot.com/

    May be a rude way .. but it works.
    Add narrative view and use Java script to change the column headings based on the variables.
    <script language="javascript" type="text/javascript">
    var a = document.getElementById('idResultsTableParent');
    var rows= a.getElementsByTagName('tr');
    rows[1].cells[1].innerText ="@{Presentation Variable}";
    </script>
    Editing the same post to remove irrelevant information.
    - Girish

  • How do I set my Ricoh Aficio SP C220N to Default to print only Black and White?

    HI Guys can you help?
      How do I set my Ricoh Aficio SP C220N to Default to print only Black and White? When I check print Grey Scale box it uses the other colours to create the black instead of using the black toner cartridge. doing this from a PC works fine but not of a Mac and I am a newbie at this can you help as I don't want to waste any more colour ink unnecessarily.   

    Hi,
    Follow the steps below to print using Black Ink only:
    1. From the application used to print, click the File menu and select Print. The Print window appears.
    NOTE: The Print window might be minimized: Click the Show Details button to see all available settings.
    2. To access the color options, click the lowest selection box listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.
    3. Select Paper Type/Quality from the drop-down menu.
    4. Click the triangle next to Color Options to expend the settings.
    5. Set the Color field as Grayscale.
    6. Set the Grayscale Mode as Black Ink Cartridge Only.
    You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
    Any used preset will remain default so simply select teh standard preset to print in color.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to dynamically adjust Frequency, Phase and Amplitude for a Generated Sine Wave in C/C++?

    Hi,
    I wonder if anybody know how to dynamically adjust Frequency, Phase and Amplitude for a Generated Sine Wave in C/C++? This is a part of my project: I need to dynamically generate a sine wave voltage signal by some calculation using the data from a simultaneous analog input and another signal.
    Your help will be appreciated so much!
    Marlon

    Hello Marlon,
    Here is an example of changing frequency and ampliude for an E-series device in Labwindows/CVI. The programming should be similar in C for your S-Series device. As is says on the linked webpage above, this process is going to be very processor intensive since you will continually be creating a buffer.
    Nicholas C
    National Instruments
    Applications Engineering

  • How do you get a word and character count of a document in Pages for Mavericks

    How do you get a word and character count of a document in Pages for Mavericks?

    Hi jonathan,
    I struggled with this one as well, as i'm finishing up a PhD thesis and word counts are incredibly important. Through trial and error i found out that words like 'e.g.' and 'i.e.' count as two words and an ampersand (&) doesn't count at all. That being said, i didn't like the fact that the word count always included footnotes and i was dismayed that i couldn't get an accurate count of words in the main body of my text. That all disappeared yesterday when, by chance, while i was copying a completed chapter and pasting it into my main document, i discovered that Pages can indeed give you an accurate word count excluding the footnotes!  Here's all you need to do:
    1. In pages 5.2, make sure that the Word Count function is first enabled by selecting View --> Show Word Count from the Pages Menu Bar. (If it's already enabled, it will read View --> Hide Word Count, so if that's what it says, then no need to do anything.)
    2. Once enabled, check the Word count that's currently showing at the bottom of the page. That's the word count including your footnotes.
    2. Now, place your cursor anywhere within the current document, then hit command+A (for Select All).
    3. Viola! Your word count now shows the actual number of words within the body of the text only, excluding footnotes!
    Hope that helps!

  • How I can set up CLASSPATH and JAVA_HOME and change default JAVA_HOME

    Hi all!
    I am new in Solaris world.
    I have installed jdk1.3.1 for Solaris.
    But default java version is 1.2.1.
    How can I set up CLASSPATH and JAVA_HOME.
    How I can change default setting.
    I need to know a name of configuration file and where can I find it?
    default java

    See code sample 3 at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
    See also, the selection components row in the table under http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
    It says
    One way to preselect items is to call setSelectedValue(Object[]) or setSelectedValue(Object) from the prerender() method. You pass in the return values of the items that you want preselected. Be sure to verify that getSelected() returns null before setting the default options, or you will overwrite the user's selections on a post-back.

  • My wife and I have iPhones with 2 different iTune accounts and iCloud accounts, How can I set my Mac and iTunes up to be able to sync all as 1?.

    My wife and I have iPhones with 2 different iTune accounts and iCloud accounts, How can I set my Mac and iTunes up to be able to sync all as 1?.

    You can't merge two iTunes accounts.

  • HT2500 How do I set up separate and different mail signatures for different email accounts?

    How do I set up separate and different mail signatures for different email accounts?

    Hi Tom,
    In Mail>Preferences>Signatures, highlight the All Signatures icon on the left, drag the sigs you want to he Account on the left...

  • SCOM-Difference between Problem Count and Event Count in Application Failure Analysis Report

    Dear All, 
    Could someone explain me clearly , the difference between  Problem Count and
    Event Count in Application Failure Analysis  Report. Please help me in understanding What is meant be problem and event in the report .
    Thanks in Advance.
    Regards,
    Rajesh Kumar C

    Hello Rajesh,
    The "problem" is the logically grouped set of the exception events which have the identical hash calculated over several fields as "Stack", "Source", "Failed Function" and so on... So, even if exceptions are different
    in the other properties but hash matches over the considered properties - then all those exceptions go into the same "problem group".
    So, event is an instance of the problem. One event contributes to one problem but one problem might have a huge event count if you have a repeating issue.
    The logic is similar for the performance analysis report, only fields that go into the "problem" hash are different. e.g. "Stack" is not used in hash for perf events...
    Dmitry Matveev

  • How do I set up my phone to send a file to print from my iphone 5 to my Samsung CLX-4195FW printer?

    How do I set up my phone to send a file to print from my iphone 5 to my Samsung CLX-4195FW printer?

    Read the printer manual.

  • How can I make the rolumn and row headers appear on the printed sheet?

    I am working in Numbers'09. I want to print out my chart with the column letters and row numbers showing.
    How can I make the rolumn and row headers appear on the printed sheet?

    g,
    Those annotations are called "Labels", and they are only visible during editing when a cell selection is made within the table. If you need to have the labels on your final output, you can create labels in Text Boxes and position them adjacent to the table.
    Jerry

  • List of tables count and Views count in schema wise

    Hi All,
    I want to get all tables count and views count in Schema wise, What is the query for that?
    Thanks in Advance.

    SELECT COUNT(*) FROM sys.tables t join sys.schemas s
    on s.schema_id=t.schema_id
    SELECT COUNT(*) FROM sys.views t join sys.schemas s
    on s.schema_id=t.schema_id
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

Maybe you are looking for