How to edit LOV of the status field in activity record type?

Hi experts
I just want to edit the list of values of status field in activity record type, it is a read only filed, can anyone tell me if it is possible to edit? seems like it is referenced from a field called "EVENT_STATUS";
Thanks,
Tiger

Tiger, at this time it is not possible to edit the values in this field.

Similar Messages

  • Here is How to Edit clips of the same loop, which were recorded on seperate tracks, in the same way

    Whiteout conditions here in the northeast, it's a Blizzard!
    Hopefully this helps someone because I was banging my head against the wall trying to figure this out.
    This is for people who want to precisely loop (or edit in other ways) multiple clips in the exact same way, but that are on seperate tracks playing concurrently in Multi-track view, so for instance looping 3 different tracks recorded simultaneously from a drum machine and keeping the same exact placement of each track relative to each other when trying to get the loop right (or any other type of edit)
    It's all about how you switch between Edit view and Multi-track view, and you CAN'T group your clips before going to edit view, although this is counter-intuitive.
    The basic jist is simple, "Selections" in the timeline, transfer from Multi-Track to Edit View and Back to Multi-Track...but you most follow a certain procedure, here is the procedure:
    WARNING: THIS WILL ONLY WORK IF THE SELECTION IS OF ONE CLIP PER TRACK!!!  YOU CANNOT MAKE A TIMELINE SELECTION OF MULTIPLE CLIPS ON A TRACK AND HAVE THAT TIMELINE SELECTION TRANSFER TO EDIT VIEW, AS FAR AS I KNOW.
    In Multi-Track view:
    1) Switch the timeline to "Samples"
    2) Make a "Selection"  of the part you want to Loop and zoom all the way in to the start and end points to get the loop as precise as possible, if it's not perfect don't worry just get it as good as possible in Multi-track View, then in Edit View you can find the Zero-Crossing points.
    3) Make sure the clips you want to edit are NOT GROUPED AT THIS POINT
    Here is the part that got me - AFTER making your Selection in Multi-Track view - you have to go to Edit view in a certain way, so that you don't de-select your selection:
    WARNING: Do NOT Double-Click the clip/file you want to Edit!!!  Do not double left-click anywhere in MultiTrack View or you will de-select your selection.
    note: You have to edit the files one at a time in Edit View, but if you go there using the correct procedure, you can transfer your selection you made in Multi-Track view.
    4) Decide which clip is the hardest to one to loop (usually it's an instrument sample rather then a drum loop but you never know)
    5) Instead of double-clicking a clip to Edit it, HOLD CONTROL AND LEFT CLICK THE CLIP YOU WANT TO EDIT ONE TIME, this will select the clip without de-selecting your TIMELINE SELECTION.
    6) Now that the clip you want to edit is selected, You want to go to Edit View USING ONE ROUTE ONLY --> Simply click "Edit View"
    ^Make sure you Timeline selection is still in place and hasn't moved do to user error (e.g. accidentally clicking the timeline or shift-clicking and moving the selection by accident <--- which I do by accident when attempting to control+click)
    7) If you followed the instructions exactly, You are now in Edit View with the selected clip along with the timeline selection you selected in Multi-Track view, showing it's exact timeline location at the bottom which is relative to the Multi-Track view
    IMPORTANT: YOU MUST BE CAREFUL NOT TO DE-SELECT THE TIMELINE SELECTION, AS THAT WILL DE-SELECT THE TIMELINE SELECTION IN BOTH VIEWS.
    8) If you are having trouble looping without artifacts, To find the zero crossing points either go to edit > zero crossings or use shift+h or j for left edge, shift+K or L for right edge of the loop.
    9) if you must adjust it manually to fine tune then make sure you shift click the file as not to de-select the entire timeline selection.
    10) Once you have a perfect loop, zoom all the way in to the start and end points, and take note of exactly where the start and end points of the loop are located within the timeline.
    11) Go back to Multi-track view
    12  To trim the clips to to the exact timeline selection: Hold control+left_click each clip that needs adjusting one-time, then right click > group clips
    13) BEING CAREFUL NOT TO DESELECT YOUR TIMELINE SELECTION, select your grouped clips by HOLDING CONTROL and clicking on any of the clips
    14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
    WARNING: IF YOU ACCIDENTALLY CLICK WHEN THE DOUBLE ARROW ICON IS NOT SHOWING, YOU WILL DE-SELECT YOUR TIMELINE SELECTION AND YOU WILL HAVE TO START THIS ENTIRE PROCESS ALL OVER AGAIN.
    15) Verify that your loop is looping correctly, in some tricky instances you may have to find different zero crossing points on the initial file you edited in edit view by repeating the above procedure, but this is unusual, although it just happened to me.
    16) If everything went correctly, now all your clips on seperate tracks are looped in the exact same way, if you want to destructively edit each file down to it's loop size, you can keep your timeline selection and control+click a file then click "Edit" (the one in the toolbar of course), one by one destructively editing each file.
    17) to extend the loop either set as a loop under "loop properties" and then just drag each file the number of times you want it to loop, or do it my way and right click the clip > duplicate and set the number of times to duplicate and whether to have them back to back or spaced, this is the quickest method for me.
    Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
    -Also, you don't HAVE to group the files as I did in step 12, you can drag the edges of the clips to the timeline selection one by one, I just find it easier to group them after you have set the loop on one of the files in Edit View.
    -Remember, you can't select the files one by one and have the timeline selection transfer to Edit View IF you group the files prior to going into Edit View.
    GOT ALL THAT?  I sure as hell don't know if I do ...
    All this could be easily avoided if Audition would simply let you edit multiple files simultaneously in Edit View relative to their position on the Multi-Track timeline.
    I'd also like to know why when you do a full zoom in, neither the selection or the clips will snap to the ruler points, only to just before and after the ruler points on the timeline.
    And also (and this may be my fault) I don't understand why when the tempo of my session is 89.8bpm, the timeline under the tracks says "90bpm" why does it round it off..?
    Isn't that inexact and couldn't that present problems with syncing loops?  idk I could be wrong I can't get my head around these issues because of lack of knowledge on the subject, if someone could shed some light that would be great.

    correction needs to be made to step #14, I typed:
    14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
    Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
    14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
    Another Correction:
    Originally read:
    Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
    Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
    Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW.

  • Where do I find information on how to edit tracks in the editor?

    Where do I find information in GarageBand Help on how to edit tracks in the editor?

    billyradd wrote:
    Where do I find information in GarageBand Help on how to edit tracks in the editor?
    open GB's help (from the Help menu) and enter Track Editor in the search field, lots of information will come up

  • How do i find out the status of the ink in the HP 5510 machine?

    Please can you advise how i find out what the status of the ink is in the "HP 5510" machine?

    Hi,
    Please use this:
    From the Printer Home screen, touch the right directional key, and then touch the Ink icon to display the estimated ink
    levels.
    Regards,
    Note: The ink icon is similar to a drp\op of water.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I can't understand how to edit titles on the spine of books. Could anyone help me? Thanks.

    I can't understand how to edit titles on the spine of books. Could anyone help me? Thanks.

    the trouble is that on the spine of the book the title is cut off and I don't know how avoid it.
    I don't think you can, Fred. Pick a shorter title. And add the additional information by adding a subtitle on your title page. You can always add a second text box, using the "edit layout" panel.
    Regards
    Léonie

  • Verizon iphone. how can i get to the home screen without activating it on a plan

    how can i get to the home screen without activating it on a plan

    Unless it is a 3rd party cord, there is no cord that just goes from the phone to the wall. However, you will need a cord that connects to the computer and the phone. The device is in recovery mode and you will need to restore it. See this support document for the instructions. http://support.apple.com/kb/HT1808

  • Can a field validation point to fields of another record type?

    Field Validation based on another Record Type Field
    I am trying to build validation into a custom object that sums fields under the Account record type.
    The names of the fields from OBI (the table location and field name):
    "- Account Custom Metrics".S_INT_13+"- Account Custom Metrics".S_INT_14+"- Account Custom Metrics".S_INT_11
    My questions: can a field validation point to fields of another record type? My thought was that if OBI can look across record types than all of CRM should be able to, including field validations.
    Thank you,
    David

    Hi !
    I'm afraid this is not possible for the moment. You'll have to wait for the Release 16 I think to have such possibilities.
    The R16 will allow you to create workflow rules accross different record types (e.g. Create a task on the Account linked to the service request when a new service request is created). I hope there will be the same possibilities with the validation rules...
    Hope this will help, feel free to ask more.
    Max

  • I recently updated to Firefox (desktop) 6.0.2 & love it but please can you tell me an EASY way HOW I can I get the status bar to display at the bottom so I can see the status of my downloads, safe sites & that sync is either in progress or finished.

    Windows 7 64-bit
    Firefox v. 6.0.2
    Norton 360 v.5

    Firefox has a status panel that shows you what is happening during page loading, and also shows the destinations of links when you mouse over them. The status bar showed that as well. You really do not lose that information. I found that I like the addons bar better than the status bar because I could put more buttons on it.

  • How do I select/change the status of my post/reply?

    Hello,
    I'm fairly new to the forum and I'm finding it challenging to figure out how to use all the features in a straight forward manner.
    For instance,  I've noticed on my recent reply to one of my post questions that the status automatically showed up as "this solved my question".  I did not select this status and I did not see any place to select the status of my reply.  I went back to edit the reply status immediately and still saw no way to change it.
    The fact is, that my reply was not in relation to solving my question at all.  I replied to someone who offered a solution and I was replying as to the results of that solution, which did not solve my issues, it just created different issues.  So now my post shows as solved when my question hasn't been answered and the issue is not solved.
    The probabability that my question above has been asked ad infinitum is better than good, I suspect.  But when I search the quesiton in the search communities box I don't get a clear answer.  Please do excuse me then, if I am repeating an over asked question.  I'm not even sure I'm searching the forum correctly or if there are other options to search in addtion the search box in the upper right hand corner....
    Honestly, I've been on a lot of forums and am an active member of several, I'm a fairly advanced mac user, having been a mac guy for decades, and this forum doesn't appear to be very clear or easy to figure out how to use to me.  It feels as if they're almost trying to discourage you from figuring some things out...weird.  I've been searching for a clear answer for this for an hour now--trying different queries and different parts of the forum.
    Any help with how to select and change post and reply staus would be much appreciated.

    These buttons that you show were not on the post I replied to in my thread.
    You will see the buttons only, if you are the original poster of the thread, not if you asked a question in thread, that someone else started.  Also, you will not see these buttons, if you already markes answers as solved or helpful. You can mark two answers as "Helpful" and one answer as "Solved". Afterwards the buttons will vanish, see "Answering to Questions".
    Another question that comes up is, if I fail to select either button and simply reply to the post without selecting anything, what happens then?
    Then the buttons will stay, until you mark an answer. You are not obliged to mark every answer. It is up to you, how you rate the answers you receive.
    You may want to have a look at the tutorials on the main page of the ASC: https://discussions.apple.com/static/apple/tutorial/index.html
    Regards
    Léonie

  • Need help on How to edit RDF file to  see fields

    Hi all ,
    Thank you all for being helping
    could please someone explain where and how to edit the RDF file to view the code and fields, sometimes we need extra fields to add in the RTF templates.
    And if I get XML file from EBS, on top of the page of xml file tags says <RAXINV>
    how can i able to see this RAXINV short name in EBS on particular application to view fields and other info reg report,that way I can see columns and tablenames by using Help- ->record history, and Diagonise that particular report.
    any help please
    vasu

    Hi Srinuk, I'm not sure what you mean?
    An EBS report (RDF) "root" tag will always start with the "module" name in the property pallete of the report itself. Your XML tags and nestings are a direct result of your data model groupings combined with whatever your layout is defined as?
    Looking at a record history within EBS only tells you what table the form is looking at and I can't see what this has to do with an EBS report definition unless I'm missing something in your question.
    You need to open the RDF to getting the data model to understand the XML tags.
    Rob.
    http://www.scnet.com.au

  • How to restart WorkItem if the status is completed

    Hello,
    Due to my mistake in PRD not in DEV i changed the WI status from started to completed.
    Now i have 110 WI affected and i dont know how to restart them, or make them finish normaly the right path.
    In the LOG i can see: Execution was ignored (work item has final status)
    Area: SWF_RUN
    Msg: 568
    Regards
    Laurynas Prikockis
    Edited by: Laurynas Prikockis on Apr 15, 2009 7:59 AM

    Resetting the status of a completed workitem? I think it is not possible , because you can reset the status of a workitem which is in in process state to ready state or the workitem which is in error state( May be not sure) but the status of completed workitem , not possible, because the workitem will not be in any of the users inbox.
    But will let you  know , if there is any possiblity
    Check this error when I tried to reset the status of workitem which is completed by using the FM
    SAP_WAPI_SET_WORKITEM_STATUS
    Status change from COMPLETED to READY is not allowed/possible

  • How to supress sign after the amount field

    Hi All,
    How to suppress the sign after the amount field is it using only no-sign or any other ways are there for doing that?
    Regards
    Mahesh

    Hi,
      Please use the Variable type BSEG-DMBTR, which does not support any sign. <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Feb 20, 2008 2:07 PM

  • Unable to return value from LOV to the text field

    I have created the LOV and attached in the database text item. I have done the mapping to the require field in the LOV properties and I was able to show the LOV whenever reach that field by press F9 with all the records in my query. However, when I try to press enter to select one of the data in the LOV screen, the data was not return to the column which I have defined the LOV. What's wrong with this ?
    Regards,
    Lim

    Lim,
    Check is there any KEY-LIST-VAL trigger has any code. And Also check by assigning the same value to a dummy item for testing.
    Regards,
    Manu.

  • How can I display, horizontaly the multi-fields that I programmed Content Query to pull into a subsite?

    Hello all
    Am using SP Online,
    After doing the step by step programing found on
    http://www.heathersolomon.com/blog/articles/customitemstyle.aspx
    I was able to pull from a contact list the apt #, last name and first name of a contact list onto a subsite. But the information displays' vertically
    Example
    709
    Smith
    John
    How can I get it to display horizontally?
    709 Smith John
    Thank You
    Pierre
    PS: for those who want to do the same, (as per many questions and blogs I have read) if you go to the link above, note that step 17 the original line of code and the one you would need is almost identical except you have to take out the forward slash
    after "string" see the correct line of code (as shown on the blog below) but I missed the minor difference which of course prevented the webpart to work properly.
    <property name="CommonViewFields" type="string">InternalColumnNameGoesHere,
    FieldType</property>
    pgg02

    Hello,
    the answer is in step 21 of Heather Solomon's tutorial:
    Wrap HTML around the tag to format the data.  
    Please note!! When the page renders the CQWP, the site grabs the Item Style for each line of data.  So we can't add a table and expect that each line of data will be in a row.  Instead we get a full table for each line of data. 
    Keep this in mind as you style the HTML around the data.
    You need to create the html structure and place your fields inside. To have the values show up in one row with spaces between them, place the three field calls in the same row, like
    <div><xsl:value-of select="@Field1" /> <xsl:value-of select="@Field2" /> <xsl:value-of
    select="@Field3" /></div>
    cheers, teylyn

  • How to edit text in the yellow text box of a URL-link?

    Hey guys!
    I´m currently working on a website in Iweb.
    My current challenge is the following:
    - I´ve made a marked text a hyperlink. But when I rollover it, a yellow text box appears and shows the entire URL.
    Now, I want it to show a custom edit text.
    example:
    the link is: www.domainpage.com/home/subfolder/page1234/sweet.html.
    the yellow text box SHOULD SAY (example):
    "Sweet" tattoo
    How do I rename the text in the yellow box?

    This is a screenshot of what text boxes affect the page title.
    If you can't change the necessary text box to reflect the title you want you can add the title via an HTML snippet and the following code:
    <script type='text/javascript'>
    parent.document.title = "PAGE NAME TO SHOW IN BROWSER TAB/BAR";
    </script>
    Apply the code via snippet to each page you want to change the name to.
    OT

Maybe you are looking for