How to edit the date in an event

Help please, I uploaded some pictures into iphoto (I'm new to it). However they were uploaded and dated in an event automatically as 2004 and they are supposed to be 2009. Does anyone know how to change the date for events manually? I cannot figure it out. Thanks!!!

Check your camera set up - the dates iPhoto use come from it
to correct dates select the photo(s) you want to correct and adjust the time and date - iphoto menu ==> adjust date and time
You may find the iPhoto tutorials worth watching - http://www.apple.com/findouthow/photos/ - as simple and intuitive as iPhoto is there is a learning curve and there are lots of features to learn
LN

Similar Messages

  • How to edit the date of a picture or album?

    So, my camera reset itself at somepoint and the date was all wrong. Ofcorse, i dint realize till i took about a thousand pictures and then imported them into iPhoto...
    Now i have my pictures all over the place. Pictures from 2008 appearing in 2005 etc.
    How do i change the dates of individual pictueres and/or albums? Hope someone can help.
    I am using iPhoto 'O8 - version 7.1.3
    Cheers

    Akanish
    Welcome to the Apple user discussion forums
    iPhoto '08 (version 7.n.m) has two ways to do this
    If the camera date is working but set wrong so all dates are off by the same amount select the photos or events you want to correct and use the photos menu ==> adjust time and date - this will calculate the correction from the first photo and apply that correction to all selected photos
    If the dates are just wrong then the selecting the photos or events and using the photos menu ==> batch change ==> date and time will set an arbitrary new date and time for the selected photos - optionally adding a set increment to each successive one
    The help menu may have more information on this process if you need it
    LN

  • HT4910 I have a simple question or 2. 1) how can I see what is on my icloud and how do I edit the data if I do not want it on icloud. 2) I have an app that I would like to update data - it doesn't appear to be doing that, how can I fix that? It is the mob

    1) how can I see what is on my icloud and how would I edit the data that is on it?
    2) I am having problems with an app syncing data with pc - how can I fix that? It is mobile noter.

    Welcome to the Apple Community.
    You can see what's in iCloud collectively at settings > iCloud > storage & back up > manage.... You can only edit the data through the appropriate app (contacts, calendars etc)
    For problems with 3rd party apps, contact the developer.

  • How to edit the existing data in the XML file from java programming.

    Hi all
    i am able to create XML file with the sample data as below from java programming.
    i need sample code on how to edit the existing data in the XML file?
    for example
    <?xml version="1.0"?>
       <mydata>
               <data1>
                         <key1>467</key1>
                        <name1>Paul</name1>
                        <id1>123</id1>
              </data1>
              <data2>
                         <key2>467</key2>
                        <name2>Paul</name2>
                        <id2>123</id2>
              </data2>
        </mydata>
    i am able to insert the data in the XML.
    now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
    Regards
    Sunil
    [points will be always rewardable]

    hi
    u need a parser or validate the xml file for to read the xml file from java coding u need for this
    xml4j.jar u can download this file  from here
    http://www.alphaworks.ibm.com/tech/xml4j
    or we can use the SAX(simple API for XML)
    some sample applications for this
    http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
    http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
    http://www.xml-training-guide.com/e-xml44.html
    let me know u need any other info
    bvr

  • How to unlock the data from other user while editing

    Hi friends,
    I have created 4 maintenance views for a table. While editing data by using one view, I must be able to edit other data of the same table using other different view. But it is showing "The data is locked by user pagidala and can be displayed only. do u want to display locked data?". I must not get this error, it must permit me to edit the data. How it will be possible?
    Thanks,
    Ramesh.

    Hi,
    I think Its not possible because If there is such type of option there will not be data security.
    i.e. while your maintaing the data in table others can change it simultaneously and it can lead to errors
    If you wish Go to SM12 and remove the lock manually
    Regards
    Prasanth

  • I've just imported photos that are misdated and appear out of order in my events. How can I correct the dates on these events so they appear properly?

    I've just imported photos that are misdated and appear out of order in my events. How can I correct the dates on these events so they appear properly?

    The one iin the Photos ➙ Adjust Date and Time menu option:
    checkbox below:

  • How many ways to edit the data in PSA?

    HI
    How many ways to edit the data in PSA? Can we edit both transaction, master data also?

    Hi.......
    Yes yo can edit data in PSA for both Master data and transaction data.......the only diffrence is that in transaction data you have to delete the request from the target before editing......and in master data no need to delete any request....directly edit the PSA........
    To edit PSA......the most easiest method has alsredy mentioned ............
    But suppose you don't have authorization to edit the data in PSA but still you want to edit then you can follow the process mentioned below..........
    You can call up the function module RSAR_ODS_API_GET with the list of request IDs given by the function module RSSM_API_REQUEST_GET. The function module RSAR_ODS_API_GET no longer recognizes InfoSources on the interface, rather it recognizes the request IDs instead. With the parameter I_T_SELECTIONS, you can restrict reading data records in the PSA table with reference to the fields of the transfer structure. In your program, the selections are filled and transferred to the parameter I_T_SELECTIONS.
    The import parameter causes the function module to output the data records in the parameter E_T_DATA. Data output is unstructured, since the function module RSAR_ODS_API_GET works generically, and therefore does not recognize the specific structure of the PSA. You can find information on the field in the PSA table using the parameter E_T_RSFIELDTXT.
    RSAR_ODS_API_PUT
    After merging or checking and subsequently changing the data, you can write the altered data records into the PSA table with the function module RSAR_ODS_API_PUT. To be able to write request data into the table with the help of this function module, you have to enter the corresponding request ID. The parameter E_T_DATA contains the changed data records.
    check these links:
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/8d4b38187a8442e10000009b38f8cf/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/67efb9bb-0601-0010-f7a2-b582e94bcf8a
    Hope this helps.......
    Regards,
    Debjani......

  • How to pass the data from a input table to RFC data service?

    Hi,
    I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
    I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
    Thanks for your answer.

    Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to  be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
    Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
    Thanks.

  • How to download the data which is in the table?

    how to download the data which is in the table?
    every field data in the table i want to download and once the download is finished then i have to set the flag as 'download is finished ' as one field in table?
    can any one help me in this.
    Phani.
    Edited by: phani kumarDurusoju on Jan 9, 2008 6:36 AM

    One way is to Download the data Directly from the database table using the path SE11->Give table name ->Execute -> system ->List ->Save ->Local File
    There u can downlaad the data .
    The ither way is to use the code
    The Following Code will be helpfull to You
    Data :ITAB  TYPE TRUXS_T_TEXT_DATA,
            FILE  TYPE STRING.
             C_ASC     TYPE CHAR10   VALUE 'ASC',
    DATA: L_STATUS TYPE C,
           L_MESSAGE TYPE PMST_RAW_MESSAGE,
           L_SUBJECT TYPE SO_OBJ_DES.
    DATA: L_FILELENGTH TYPE I.
      PERFORM download_to_pc
                  TABLES
                     itab
                  USING
                     filename
                     c_asc
                     c_x
                  CHANGING
                     l_status
                     l_message
                     l_filelength.
    FORM DOWNLOAD_TO_PC TABLES   DOWNLOADTAB
                        USING    FILENAME
                                 FILETYPE TYPE CHAR10
                                 DELIMITED
                        CHANGING STATUS
                                 MESSAGE TYPE PMST_RAW_MESSAGE
                                 FILELENGTH TYPE I.
      DATA: L_FILE TYPE STRING,
            L_SEP.
      L_FILE = FILENAME.
      IF NOT DELIMITED IS INITIAL.
        L_SEP = 'X'.
      ENDIF.
      STATUS = 'S'.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          FILENAME                = L_FILE
          FILETYPE                = FILETYPE
          WRITE_FIELD_SEPARATOR   = L_SEP
        IMPORTING
          FILELENGTH              = FILELENGTH
        TABLES
          DATA_TAB                = DOWNLOADTAB
        EXCEPTIONS
          FILE_WRITE_ERROR        = 1
          NO_BATCH                = 2
          GUI_REFUSE_FILETRANSFER = 3
          INVALID_TYPE            = 4
          NO_AUTHORITY            = 5
          UNKNOWN_ERROR           = 6
          HEADER_NOT_ALLOWED      = 7
          SEPARATOR_NOT_ALLOWED   = 8
          FILESIZE_NOT_ALLOWED    = 9
          HEADER_TOO_LONG         = 10
          DP_ERROR_CREATE         = 11
          DP_ERROR_SEND           = 12
          DP_ERROR_WRITE          = 13
          UNKNOWN_DP_ERROR        = 14
          ACCESS_DENIED           = 15
          DP_OUT_OF_MEMORY        = 16
          DISK_FULL               = 17
          DP_TIMEOUT              = 18
          FILE_NOT_FOUND          = 19
          DATAPROVIDER_EXCEPTION  = 20
          CONTROL_FLUSH_ERROR     = 21
          OTHERS                  = 22.
      IF SY-SUBRC <> 0.
        STATUS = 'E'.
        CASE SY-SUBRC.
          WHEN 1.
            MESSAGE = 'gui_download::file write error'.
          WHEN 2.
            MESSAGE = 'gui_download::no batch'.
          WHEN 3.
            MESSAGE = 'gui_download::gui refuse file transfer'.
          WHEN 4.
            MESSAGE = 'gui_download::invalid type'.
          WHEN 5.
            MESSAGE = 'gui_download::no authority'.
          WHEN 6.
            MESSAGE = 'gui_download::unknown error'.
          WHEN 7.
            MESSAGE = 'gui_download::header not allowed'.
          WHEN 8.
            MESSAGE = 'gui_download::separator not allowed'.
          WHEN 9.
            MESSAGE = 'gui_download::filesize not allowed'.
          WHEN 10.
            MESSAGE = 'gui_download::header too long'.
          WHEN 11.
            MESSAGE = 'gui_download::dp error create'.
          WHEN 12.
            MESSAGE = 'gui_download::dp error send'.
          WHEN 13.
            MESSAGE = 'gui_download::dp error send'.
          WHEN 14.
            MESSAGE = 'gui_download::ubknown dp error'.
          WHEN 15.
            MESSAGE = 'gui_download::access denied'.
          WHEN 16.
            MESSAGE = 'gui_download::dp out of memory'.
          WHEN 17.
            MESSAGE = 'gui_download::disk full'.
          WHEN 18.
            MESSAGE = 'gui_download::dp timeout'.
          WHEN 19.
            MESSAGE = 'gui_download::file not found'.
          WHEN 20.
            MESSAGE = 'gui_download::dataprovider exception'.
          WHEN 21.
            MESSAGE = 'gui_download::control flush error'.
          WHEN 22.
            MESSAGE = 'gui_download::Error'.
        ENDCASE.
      ENDIF.
    ENDFORM.             "download_to_pc
    At The End Reward points.
    Please it's Required.
    Thanks ,
    Rahul

  • How to get the data of table from JSP to Servlet?

    Hi,
    I have a dynamic editable table of 3 columns on a jsp. On click on any cell the usr can edit the data. Now on click of submit button on the jsp I need to submit or get the whole data of all the rows to a servlet which would further process it.
    How do I do that?
    TIA.

    I am not sure whether u r getting my doubt or not
    properly. I am populating the table data in an
    arraylist of DO. with this arraylist I am displaying
    the data on the Screen.
    <%
    for(int i=0;i<alList.size();i++)
    DO d = alList.get(i);
    %>
    <Table>
    <tr>
    <td><%=d.getfirstField()%></td>
    <tr>
    </Table>
    <%
    %>
    The above code sniipet displays the data on screen.
    But as table being editable i would change the data
    in the cell and submit .
    So how do i capture this data? I cannot name the cell
    becos I am not sure how many rows would be displayed.
    In servlet I would use request.getParameter(?);
    TIAIf you table is editable nad has input field to edit then "malcolmmc's " answer will work perfectly.
    you can also use hidden form fields to use those vaues at servlet like this
    <input type="hidden" name="UniqueName' value="<%=d.getfirstField()%>'>
    Here UniqueName should be the unique for each cell value so that on servlet you can fetch these values using request.getParameter("UniqueName").

  • How to filter the data in different sections (e.g. Report Footers)?

    Hi,
    I am using Crystal Reports 11 to generate cross-tables.
    I plan to generate 3 cross-tabs, and each cross-table will be put in a section. For example, cross-tab1 in Report Footer a; cross-tab2 in Report Footer b; cross-tab3 in Report Footer c.
    I know use "Select Expert" to filter data. But, it seems that "Select Expert" filters data for the whole report.
    I want to filter the data for each cross-table separately. For example, filter cross-tab1 based on condition1; filter cross-tab2 based on condition2; filter cross-tab3 based on condition3.
    How to filter the data in different sections (e.g. Report Footers)?
    Thank you in advance.

    Hi,
    Now that you've inserted the subreport just right-click the sub-report and click Edit. The Design page for sub-report should open up.
    You can now insert the cross-tab on the Report Header and insert a record selection formula of your choice.
    Also, suppress all the other sections of the subreport so the Main report only shows the crosstab without any spaces.
    Do the same for all the subreports.
    -Abhilash

  • How to Hightlight the Data in Jsp Page

    How to Hightlight the Data in Jsp Page,
    I am doing doing search page,based on values given search page those are sent to servlet,in servlet based on some conditions if particuler id i am getting then i am redirecting to Respective jsp page with highlight the data from database..
    Thanks in advance...

    "Highlighting data in JSP sounds strange".
    Without looking at your search specific algorithms I feel you are finally going to display a page (HTML content) to user which contains highlighted text. Highlighting is not directly related to server side language you use (JSP, ASP, PHP etc.). This is purely HTML and CSS. However, server side script (such as JSP) should generate HTML content for getting highlight effect.
    Following HTML shows highlighted text using background-color property on span element.
    <html>
      <head>
        <title></title>
        <meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
      </head>
      <body>
          <p style="font-size:1.1em">This is a long paragraph which contains <span style="background-color: yellow;">highlighted text</span> and non highlighted text.</p>
      </body>
    </html>Thanks,
    Mrityunjoy
    Edited by: mrityunjoy on 14 Jun, 2010 3:30 AM

  • How to get the date for the first monday of each month

    Dear Members,
    How to get the date for the first monday of each month.
    I have written the following code
    SELECT decode (to_char(trunc(sysdate+30 ,'MM'),'DAY'),'MONDAY ',trunc(sysdate+30 ,'MM'),NEXT_DAY(trunc(sysdate+30 ,'MM'), 'MON')) FROM DUAL
    But it look bith complex.
    Abhishek
    Edited by: 9999999 on Mar 8, 2013 4:30 AM

    Use IW format - it will make solution NLS independent. And all you need is truncate 7<sup>th</sup> day of each month using IW:
    select  sysdate current_date,
            trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month
      from  dual
    CURRENT_D FIRST_MON
    08-MAR-13 04-MAR-13
    SQL> Below is list of first monday of the month for this year:
    with t as(
              select  add_months(date '2013-1-1',level-1) dt
                from  dual
                connect by level <= 12
    select  dt first_of_the_month,
            trunc(dt + 6,'iw') first_monday_the_month
      from  t
    FIRST_OF_ FIRST_MON
    01-JAN-13 07-JAN-13
    01-FEB-13 04-FEB-13
    01-MAR-13 04-MAR-13
    01-APR-13 01-APR-13
    01-MAY-13 06-MAY-13
    01-JUN-13 03-JUN-13
    01-JUL-13 01-JUL-13
    01-AUG-13 05-AUG-13
    01-SEP-13 02-SEP-13
    01-OCT-13 07-OCT-13
    01-NOV-13 04-NOV-13
    FIRST_OF_ FIRST_MON
    01-DEC-13 02-DEC-13
    12 rows selected.
    SQL> SY.

  • How to insert the data from XML to a table

    Hi,
    I'm using Oracle 10g Express Edition
    I need help in How to insert the data from XML file into the table.
    Below is the example i'm working on..
    I have create ridb user with below mentioned privileges:
    Account Status Locked Unlocked
    Default Tablespace: USERS
    Temporary Tablespace: TEMP
    User Privileges :
    Roles:
    CONNECT
    RESOURCE
    Direct Grant System Privileges:
    CREATE DATABASE LINK
    CREATE MATERIALIZED VIEW
    CREATE PROCEDURE
    CREATE PUBLIC SYNONYM
    CREATE ROLE
    CREATE SEQUENCE
    CREATE SYNONYM
    CREATE TABLE
    CREATE TRIGGER
    CREATE TYPE
    CREATE VIEW
    & table is created TRIALZIPCODES below mentioned is the DDL:
    CREATE TABLE TRIALZIPCODES
    STATE_ABBR VARCHAR2(20) NOT NULL
    , ZIP_CODE NUMBER(10, 0) NOT NULL
    , ZIP_CODE_EXT VARCHAR2(20)
    Below is the XML FILE: which is stored in C:\OracleProject Folder
    File name: trial.xml
    <?xml version="1.0" ?>
    <metadata>
    - <Zipcodes>
    - <mappings Record="4">
    <STATE_ABBREVIATION>CA</STATE_ABBREVIATION>
    <ZIPCODE>94301</ZIPCODE>
    </mappings>
    - <mappings Record="5">
    <STATE_ABBREVIATION>CO</STATE_ABBREVIATION>
    <ZIPCODE>80323</ZIPCODE>
    <ZIP_CODE_EXTN>9277</ZIP_CODE_EXTN>
    </mappings>
    </Zipcodes>
    </metadata>
    PL/SQL Procedure:which i'm trying to execute from SQLDeveloper
    create or replace
    PROCEDURE TRIAL AS
    BEGIN
    DECLARE
    -- declare attributes
    charString varchar2(80);
    finalStr varchar2(4000) := null;
    rowsp integer;
    v_FileHandle UTL_FILE.FILE_TYPE;
    l_context_handle dbms_xmlgen.ctxHandle;
    insCtx DBMS_XMLStore.ctxType;
    begin
    -- DBMS_XMLGEN.setRowTag ( ctx IN ctxHandle, rowTag IN VARCHAR2);
    -- DBMS_XMLGEN.setRowSetTag ( ctx IN ctxHandle, rowSetTag IN VARCHAR2);
    -- the name of the table as specified in our DTD
    DBMS_XMLGEN.SETROWSETTAG(l_context_handle,'zipcodes');
    -- the name of the data set as specified in our DTD
    DBMS_xmlgen.setRowTag(l_context_handle,'mappings');
    -- for getting the output on the screen
    dbms_output.enable(1000000);
    -- open the XML document in read only mode
    v_FileHandle := utl_file.fopen('c:/OracleProject','trial.xml', 'r');
    loop
    BEGIN
    utl_file.get_line(v_FileHandle, charString);
    exception
    when no_data_found then
    utl_file.fclose(v_FileHandle);
    exit;
    END;
    dbms_output.put_line(charString);
    if finalStr is not null then
    finalStr := finalStr || charString;
    else
    finalStr := charString;
    end if;
    end loop;
    -- for inserting the XML data into the table
    insCtx := DBMS_XMLSTORE.NEWCONTEXT('RIDB.TRIALZIPCODES');
    insCtx := DBMS_XMLSTORE.INSERTXML(insCtx, finalStr);
    dbms_output.put_line('INSERT DONE '||TO_CHAR(rowsp));
    DBMS_XMLStore.closeContext(insCtx);
    END;
    END TRIAL;
    For the first time when i complied i got the errors as :
    Procedure RIDB.PROCEDURE1@RIDB
    Error(16,14): PLS-00201: identifier 'UTL_FILE' must be declared
    Error(16,14): PL/SQL: Item ignored
    Error(29,1): PLS-00320: the declaration of the type of this expression is incomplete or malformed
    Error(29,1): PL/SQL: Statement ignored
    Error(33,1): PL/SQL: Statement ignored
    Error(33,19): PLS-00320: the declaration of the type of this expression is incomplete or malformed
    Error(36,1): PL/SQL: Statement ignored
    Error(36,17): PLS-00320: the declaration of the type of this expression is incomplete or malformed
    So i logged in as sys & grant the permission to execute on UTL_FILE to ridb (user):
    SQL Statement:
    grant execute on utl_file to ridb
    So, it got compiled successfully but when i execute it gives me error as:
    Source does not have a runnable target.
    What does this mean?
    So I browse through forum & i got to know that i need to initial the UTL_FILE_DIR ="C:/OracleProject" in init.ora
    So can i edit the init.ora with notepad.When i tried to do that it says permission denied
    In my system it shows the init.ora file in path C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts
    but there is also other file initXETemp in the same path do i need to do the changes in it.
    I have tried even editing the SPFILE as mentioned below:
    C:\oraclexe\app\oracle\product\10.2.0\server\dbs\SPFILEEXE - I had edit this file using notepad & set the value of UTL_FILE_DIR ="C:/OracleProject". So next time when i restarted i'm unable to log on to the database.
    So i had reinstall the software again.
    Could you please let me know how to proceed..

    hi,
    I have created the directory from sys database
    CREATE or replace DIRECTORY XML_DIR2 AS 'C:\OracleProject';
    & grant read,write access to the user
    grant read,write on directory XML_DIR2 to RIDB;
    & i had change the tag name in the xml file as shown below:
    <?xml version = '1.0'?>
    <metadata>
    <Zipcodes>
    <mappings Record="4">
    <STABBRE>CA</STABBRE>
    <ZIPCODE>94301</ZIPCODE>
    </mappings>
    <mappings Record="5">
    <STABBRE>CO</STABBRE>
    <ZIPCODE>80323</ZIPCODE>
    <ZIPCODEEXT>9277</ZIPCODEEXT>
    </mappings>
    </Zipcodes>
    </metadata>
    TRIALZIPCODE table as shown below:
    CREATE TABLE "RIDB"."TRIALZIPCODE"
    (     "STABBRE" VARCHAR2(20 BYTE),
         "ZIPCODE" NUMBER(*,6) NOT NULL ENABLE,
         "ZIPCODEEXT" NUMBER
    ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
    STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
    TABLESPACE "USERS" ;
    I have tried two methods as shown below:
    Procedure 1:
    create or replace
    PROCEDURE TRIAL_V2 AS
    BEGIN
    DECLARE
    -- declare attributes
    charString varchar2(80);
    finalStr varchar2(4000) := null;
    rowsp integer;
    v_FileHandle UTL_FILE.FILE_TYPE;
    l_context_handle dbms_xmlgen.ctxHandle;
    insCtx DBMS_XMLStore.ctxType;
    cnt NUMBER;
    xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
    --XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
    BEGIN
    insCtx := DBMS_XMLStore.newContext('DEV.TRIALZIPCODES');
    DBMS_XMLStore.setUpdateColumn(insCtx, 'STABBRE');
    DBMS_XMLStore.setUpdateColumn(insCtx, 'ZIPCODE');
    DBMS_XMLStore.setUpdatecolumn(insCtx, 'ZIPCODEEXT');
    DBMS_XMLStore.setRowTag(insCtx, 'mappings');
    cnt := DBMS_XMLStore.insertXML(insCtx, xmldoc);
    DBMS_XMLStore.closeContext(insCtx);
    END;
    Procedure 1 was compiled with out errors but when i execute i got the error as :
    Source does not have a runnable target.
    Procedure 2_
    CREATE OR REPLACE PROCEDURE TRIAL_V3 AS
    BEGIN
    DECLARE
    -- declare attributes
    charString varchar2(80);
    finalStr varchar2(4000) := null;
    rowsp integer;
    v_FileHandle UTL_FILE.FILE_TYPE;
    l_context_handle dbms_xmlgen.ctxHandle;
    insCtx DBMS_XMLStore.ctxType;
    cnt NUMBER;
    xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
    --XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
    BEGIN
    INSERT INTO trialzipcode (STABBRE, ZIPCODE, ZIPCODEEXT)
    SELECT extractvalue(x.column_value, 'mappings/STABBRE'),
    extractvalue(x.column_value, 'mappings/ZIPCODE'),
    extractvalue(x.column_value, 'mappings/ZIPCODEEXT')
    FROM TABLE(
    XMLSequence(
    EXTRACT(
    xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') ),
    'metadata/Zipcodes/mappings'
    ) x
    END;
    END TRIAL_V3;
    Procedure 2 was complied without errors but when i execute i got the error as:
    Connecting to the database RIDB.
    ORA-22288: file or LOB operation FILEOPEN failed
    The system cannot find the file specified.
    ORA-06512: at "SYS.DBMS_LOB", line 523
    ORA-06512: at "SYS.XMLTYPE", line 287
    ORA-06512: at "RIDB.TRIAL_V3", line 12
    ORA-06512: at line 2
    Process exited.
    Disconnecting from the database RIDB.
    Could you please let me know how to proceed...

  • How to pass the data from web dynpro to workflow.

    hi gurus,
    how to pass the data from web dynpro to workflow.
    Regards
    vijay

    Hi
    you can use function module
    data   ls_input_container  TYPE swr_cont.
    data   lt_input_container  TYPE TABLE OF  swr_cont.
    CALL FUNCTION 'SAP_WAPI_START_WORKFLOW'
        EXPORTING
          task            = ptask
        IMPORTING
          return_code     = lv_return_code
          new_status      = lv_new_status
        TABLES
          input_container = pinput_container
          message_lines   = lt_message_lines
          message_struct  = lt_message_struct.
    where you pass the data in imnternal table "pinput_container" as
      ls_input_container-element = 'KUNNR'.
      ls_input_container-value = ls_skna1-kunnr ."wd_this->lv_kunnr.
      APPEND ls_input_container TO lt_input_container .
      ls_input_container-element = 'CLUSER'.
      ls_input_container-value = lv_cluser.
      APPEND ls_input_container TO lt_input_container .
      ls_input_container-element = 'BUKRS'.
      ls_input_container-value = lv_bukrs. " youe value as per requirement.
      APPEND ls_input_container TO lt_input_container .
      ls_input_container-element = 'VKORG'.
      ls_input_container-value = ls_sknvv-vkorg. " youe value as per requirement
      APPEND ls_input_container TO lt_input_container .
      ls_input_container-element = 'VTWEG'.
      ls_input_container-value = ls_sknvv-vtweg. "youe value as per requirement.
      APPEND ls_input_container TO lt_input_container .
      ls_input_container-element = 'SPART'.
      ls_input_container-value = ls_sknvv-spart. "youe value as per requirement.
      APPEND ls_input_container TO lt_input_container .
    *Also Forgot to mention where ptask is your workflow ID *
    Regards,
    Arvind
    Edited by: Arvind Patel on May 14, 2010 7:38 AM

Maybe you are looking for