How to eliminate date and time in image logging in vision express

I am using vision express to capture a set number of images with inline processing. I am opting to log the images to a specified folder. However, the file names of the images have the date and time appended by default. Is there a way to eliminate the date and time in the images' file name? Please help.
Solved!
Go to Solution.

Hi
It may help if you paste your code and file to better understand what is it that you want to remove from the file. If you have the vision development module, you can certainly use the File VIs available within the vision tools utilities palette in LabVIEW to manipulate the way you save your files.
http://www.ni.com/pdf/manuals/371007a.pdf (Page14)
There is a good example code you can refer to within the following forum link:
http://forums.ni.com/t5/LabVIEW/Labview-IMAQ-VI-for-capturing-images-and-saving-with-incremental/td-...
Also if you have access to the Vision Builder for Automated Inspection software, this application offers you that option:
http://digital.ni.com/public.nsf/allkb/AE578D1C036084C0C1256EB4005EE687?OpenDocument
Luis S
Application Engineer
National Instruments

Similar Messages

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

How to compare date and time together

Hi,
How to compare Date and Time together?
For example in a database table there are two fields rundate and runtime. I want to compare these two with perticular date and time in the program. Like, I want to pull all the records where the records's date and time are less than a perticular date and time in the program.
Hope the question is clear...
Thanks.
Kavita

Hi Kavita
There is no as such Date and Time Comparision FM in Standard SAP But You can define your own like this
<b>FUNCTION ZAV4_COMPAREDATETIME.
""Lokale Schnittstelle:
*" IMPORTING
*"     REFERENCE(DATE1) TYPE DATS
*"     REFERENCE(TIME1) TYPE TIMS
*"     REFERENCE(DATE2) TYPE DATS
*"     REFERENCE(TIME2) TYPE TIMS
*" EXPORTING
*"     VALUE(TWOISMORETOPICAL) TYPE C
twoismoretopical = ''.
if date2 > date1.
    twoismoretopical = 'X'.
else.
     if date2 = date1 and time2 > time1.
       twoismoretopical = 'X'.
     endif.
endif.
ENDFUNCTION.</b>
Regards
Mithlesh

How to display date and time on jsf page

Hi,
how to display date and time on jsf page
we are using 11.2.0.0 jdeveloper on windows.
thanks
Edited by: user12187801 on 26-Jul-2012 01:42

Your question is certainly lacking some information.
If you want a constantly updating date/time - then JavaScript is your best bet, and Google would find you examples like [url http://www.webestools.com/scripts_tutorials-code-source-7-display-date-and-time-in-javascript-real-time-clock-javascript-date-time.html]this
If you meant something else, then it's back to you to explain.

How to set date and time on apple tv

how to set date and time on apple tv

Assuming this is not the first time you have used your Apple TV
    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router.
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

How to find date and time on photo taken by iphone?, How to find date and time on photo taken by iphone?

How to find date and time on iphone's photo taken?

in iPhoto no matter the source of the photo you see the information about th ephoto by selecting the photo and showing info (the get info button may be in a different location depending on the version of iPhoto you have)
If you are not aking an iPhoto question but are asking an iPhone question instead then repost in the iPhone forum - iPhoto has no association with the iPhone
LN

Chat Messages do not show date and time of buddies logging in and out.

If I keep my buddy chat with friends open, it used show the date and time that they log in and out. Now after updating to Yosemite, it does not and also will show the last message exchange as something way older that the last chat session. Not the actual last exchange. Why?
Is there a setting that I can keep the date and time log. It's important for work conversations. Thanks.

I realize that my needs are outside of the normal editing workflow. I am a private investigator and last week I shot over 6 hours of surveillance video on a Sony video camera. Within this 6 hours of video there is at most 2 minutes of actual footage of my subject. So what I wanted to do was just import the parts of the clip I want, so I can avoid importing the whole 6 hours, and then add a text title of some sort that shows the date/time. My problem is that once I get this clip I have easy way of establising the TOD short of taking the clip capture time and then counting up using the SMTPE Timecode. In this regard iMovie makes it easier because I can just hover over the clip and see the TOD of that specific frame. iMovie on the other hand would force me to import the whole 6 hour video so i'm left moving between both programs which is less than ideal.

How do you date and time stamp pictures and videos using a EOS Rebel T3?

I am needing to utilize date and time stamping on videos and photos in my work. The pictures and videos must display time, a date, and reference number. I have gone through the cd, owner's manuel and software manuel and I am unclear if I can perform this function.

While this is a relatively common feature on point & shoot cameras -- where the photo is thought of as a snapshot to document a memory in a person's life, among DSLR cameras it's not very common (I don't actually know of a DSLR that does this though I don't doubt that it may exist). DSLR users are usually expecting a higher quality image -- so now the image is thought of more like art and less like a snapshot and the date/time in the corner distracts from the image. Also they tend to be more advanced users who would be able to modify the image themselves so they have little need for such a feature.
The camera does record the date & time... but it's in the EXIF data (information recorded into the image file but not displayed).
SO... there are programs that will just do this. You'll need to do a search (I found several but have never tried one so I can't vouch for them). I think there are Photoshop plug-ins that do this (assuming you have Photoshop). These programs allow you to define the info you want printed (including EXIF data such as date/time) and you get to pick the location, font, size, color, etc. and ultimately the location on the image where you'd like the info displayed. They then add the info visibly onto the image for you and most support "batch" use (e.g. drop a whole folder of images on it and they'll do them all.)
Tim Campbell
5D II, 5D III, 60Da

How to change date and time format

Hi experts,
Can i know how to change the date and time format?
I want the date format to be dd-mmm-yyyy and time format to be hh:mm:ss
These date and time is in my sapscript form.
I make use of PERFORM function in sapscript.
This is the code in my print program.
FORM get_actlog_QA TABLES in_tab STRUCTURE itcsy
                       out_tab STRUCTURE itcsy.
   DATA: object TYPE string, "
        qaname LIKE JCDS-USNAM, "NAME for engineering process, QA Manager
        qadate LIKE JCDS-UDATE, "DATE changed in engineering process, QA Manager
        qatime LIKE JCDS-UTIME. "TIME changed in engineering process, QA Manager
DATA: lt_jcds type standard table of jcds,
      wa_jcds like line of lt_jcds,
      new_date(10) type c.
READ TABLE in_tab INDEX 1.
MOVE in_tab-value TO object.
select * into CORRESPONDING FIELDS OF TABLE lt_jcds
from jcds WHERE objnr = object
    AND ( stat = 'E0005' )
    AND inact = ''.
Loop at lt_jcds into wa_jcds.
      qaname = wa_jcds-USNAM.
      qadate = wa_jcds-UDATE.
      qatime = wa_jcds-UTIME.
   READ TABLE out_tab INDEX 1.
   MOVE qaname TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
   READ TABLE out_tab INDEX 2.
   MOVE qadate TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
   READ TABLE out_tab INDEX 3.
   MOVE qatime TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
endloop.
clear wa_jcds.
ENDFORM.
This is my PERFORM in sapscript.
/:           DEFINE &V_QANAME& = ''.
/:           DEFINE &V_QADATE& = ''.
/:           DEFINE &V_QATIME& = ''.
/:           PERFORM GET_ACTLOG_QA IN PROGRAM ZFIR002
/:           USING &VIQMEL-OBJNR&
/:           CHANGING &V_QANAME&
/:           CHANGING &V_QADATE&
/:           CHANGING &V_QATIME&
/:           ENDPERFORM.
Sapscript
Prepared by : &V_QANAME& ,, &V_QADATE& ,, &V_QATIME&
The output now is
Prepared by: Name   20080312 115536
I want to change the date format to 12-MAR-2008
and the time format to 11:55:36
Can anyone please suggest on how to solve this?
Thank you.

Hi,
Before assigning the QADATE value you can write the logic to display 20080312   as 12-MAR-2008 taking the offset values .
Like
qadate = wa_jcds-UDATE.
qatime = wa_jcds-UTIME.
lw_year    = qadate(4).
lw_month = qadate+4(2).
lw_date    = qadate+6(2).
case lw_month.
when 1.
when 2.
        concatenate lw_date '-FEB-' lw_year into qadate.
when 3.
      concatenate lw_date '-MAR-' lw_year into qadate.
endcase.
READ TABLE out_tab INDEX 2.
MOVE qadate TO out_tab-value.
MODIFY out_tab INDEX sy-tabix.
And you can also change the timeformat also .
then assign that value to qatime .Then
READ TABLE out_tab INDEX 3.
MOVE qatime TO out_tab-value.
MODIFY out_tab INDEX sy-tabix.
I think this helps you.
Regards,
Rajitha.

How to show Date and Time with TimeZone

Dear All,
I have to show Date and Time with TimeZone abbreviation,
for example:
1) 31 March 2011 2:30 in india standard time - it should show in screen 31 March 2011 2:30 IST.
2) 31 March 2011 2:30 in Australia/New Zealand - Eastern time zone it should show in screen 31 March 2011 2:30 AEST.
how can i show *Australia/New Zealand - Eastern time zone to AEST*,
I tried with format DD MMM YYYY HH:MM zzz, and i looked time zone API too.
Appreciate your help
Thanks
Daya

Dayananda wrote:
ok, than i have to use zzzz format, as z won't help in my case, so i have to use zzzz which display descriptive value like, Indian Standard Time i.e. ISTPer the javadocs there is a very specific reason why that is a problem especially if you intend to support many timezones in one application.
"+For compatibility with JDK 1.1.x, some other three-letter time zone IDs (such as "PST", "CTT", "AST") are also supported. However, their use is deprecated because the same abbreviation is often used for multiple time zones (for example, "CST" could be U.S. "Central Standard Time" and "China Standard Time"), and the Java platform can then only recognize one of them+."
Thus you have one single case where there can be many and moreover it can change (twice a year I believe.)
There is a standard source for this information although when I tried it it appears to not work.
If the app only needs to display one zone then provide a configuration value that allows a user to overload the display value.
If the app needs to display many values then you MUST inform business users of the problem because there are duplicates and they, not you, need to decide specifically what happens in those cases.

How to provide date and time stamp to the extracted file.

I 'm downloading data from DB to Flat file using GUI_DOWLOAD. whenever it is executed it is creating with a file name.
if i rerun the program the file is overwriting with the same name.
now based on the requirement how many times i executed, that many times file should be individually created and should be added with date and time stamp.
like
if when i executed at the very first time it should saved with filename, date and time.
say "Address.txt 04/05/2007 07:55:10"
When i executed it for second time it doesn't overwrite the file.
it should create a new file.
like "Address.txt 04/05/2007 07:59:20".
Please guide me the way if possible code.
Thanks in advance.

Hi Vamsi,
               Use FM 'F4_PROGRAM' to take file from the user .
In this case user will enter the file name. u can append date & time to that file path.
Refer this code.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SY-REPID
      DYNPRO_NUMBER = SYST-DYNNR
    IMPORTING
      FILE_NAME     = P_P_FILE.
concatenate P_FILE '04/05/2007 07:59:20' into V_FILE.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                        = v_file
     filetype                        = 'ASC'
      write_field_separator           = 'X'
    TABLES
      data_tab                        = i_tab
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc = 0.
    MESSAGE i002.
ENDIF.
Reward points if helpful.
Regards,
Hemant.

How to find date and time on pics and video on iphone 4

how do you find the date and time of photos and video on iphone 4?

Your question is certainly lacking some information.
If you want a constantly updating date/time - then JavaScript is your best bet, and Google would find you examples like [url http://www.webestools.com/scripts_tutorials-code-source-7-display-date-and-time-in-javascript-real-time-clock-javascript-date-time.html]this
If you meant something else, then it's back to you to explain.

How to know date and time information from Trace File defaultTrace.X.trc?

Hi, all.
i'm using EP 6.0 SP9 patch 1.
As you know, default trace is written in the <SID>\JC00\j2ee\cluster\server0\log\defaultTrace.X.trc.
By using the default trace formatter, it shows like the following sample messages.
#1.5#0011110E7B2000590000000100000A100003EC71562E6EBC#1104396451585#com.sap.jms.server.ServerClientAdapter##com.sap.jms.server.ServerClientAdapter#Guest#18####716257115a3f11d9b73b0011110e7b20#SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#/Applications/JMS#Plain###JMS internal error at ServerClientAdapter! JMS Service is not started!#
My questions are
1. how do we retrieve the date and time information from the above message? It seems that this message has date and time info because LogViewer shows the date and time based on the above message.
2. how do we change the above date format to easier one
like "YYYY:MM:DD:hh:mm:ss"? i know that it can be configured from the Visual Admin --> Services --> Log Configurator but i don't know the exact place for the trace file.
Thanks.

Hi Sejoon,
I use the standalone Logviewer to read the log files. Works great.
"If you have an SAP Web Application Server Java 6.20 or below you may also get a standalone_logviewer.zip file at the SAP Service Marketplace at service.sap.com/download → SAP NetWeaver → Release 04. In this case JDK version 1.3 or higher must be installed on the system. The java version must be same on the server and the client.
In the SAP Web AS Java 6.30 installation a folder named logviewer_standalone can be found under: <path Of J2EE installation>/<SysID>/JC<nr>/j2ee/admin/logviewer_standalone. Verify that the batch file logviewer.bat is installed in the directory logviewer-standalone.
(source -> http://help.sap.com/saphelp_nw04/helpdata/en/e4/540c404a435509e10000000a1550b0/frameset.htm)
Best wishes,
Noel

How to use date and time

hello,
how can i use date and time in windows platform for export dumpfile.

you can use this..
C:\>echo backup_daily_%date:~4,2%_%date:~7,2%.log
backup_daily_03_12.log
may be you will have to adjust ~values to show proper values.
Hope that will help you
Anil Malkai

How to Change date and time on my printer

I want to know how to change the date and time on my printer.

annazmussaqib,
OK, now enter the following command in the administrative user’s Terminal window:
sudo date -n 122921502013
When it asks you for a password, enter your administrative user’s password; it will not show the password as you type it.
After you enter that command, enter this command again:
date
It should show a date and time that is close enough to the actual date and time that you should be able to go into the Date & Time pane of System Preferences without it hanging.

How to eliminate date and time in image logging in vision express

Similar Messages

Maybe you are looking for