How to embed custom search field in toolbar

My organization wants to integrate the Zoom Search Engine by
Wrensoft with RoboHelp 7. We want to embed the search input field
for Zoom in the main toolbar of the Help window. The skin editor in
RoboHelp does not provide an easy way to do this. I can add a
custom button that links to the custom search form, but I cannot
figure out how to embed a custom search field in the toolbar. Does
anyone have any experience or direction you can provide us?

I very much doubt that can be done. There's a topic on my
site about integrating ZoomSearch but the start point of any search
is a field that ZoomSearch provides in the htm page it creates.
Getting that field onto your toolbar is going to be outside the way
Zoom was designed.
Your developers would have to pull apart the mechanics of
that page and figure it out, if it can be done.
Have you tried approaching WrenSoft to see if they can
suggest anything?
Personally I think it is going to be a massive effort for
minimal benefit. What's the objection to clicking a button that
provides a page with the field and the results? If you get the
field into the toolbar, the search page has still got to display to
show the results.

Similar Messages

Custom search fields on BBPCF01

Hi,
I have some troubles in viewing custom search fields on transaction BBPCF01.
I created a new custom Function group with a dynpro where I will place my custom fields. I created a new html template for this screen. Then i modified the BBP_CUF_BADI implementation in order to add my custom screen:
ev_repid = 'SAPLZSMM_CUF_PO'.
ev_dynnr = '100'.
On the GUI side I correctly see my custom fields, but on web I see one field without label, no matter what I put on my dynpro, it could even be empty or contain only a checkbox. Can anyone help me?
Thanks in advance
Edited by: francesco on Jan 31, 2008 12:40 PM

Hi Karsten,
thanks for your patience. I need to add three new selection parameters for PO on the above mentioned transaction. The additional selection fields are Purchasing Document Date, Profit Center and Name of requester. Moreover I need to add some check boxes in order to further narrow selections according to a logic.
I tried to add the fields through BBP_CUF_BADI_2 and it worked, but the fields are added vertically on the web transaction making it a bit "ugly", so I decided to draw my own dynpro and call it through BBP_CUF_BADI, which allows you to call a custom dynpro on a standard transaction.
On gui side it worked, even if I still don't know how to make it actually work for the selections...
I don't know what else to do.
thanks for any help.

Issue with custom search fields in agent inbox

Hi All,
I am working on CRM agent inbox 7.0. The issue I am facing is like this:
I have added custom search fields in inbox. When give a combination of standard search field and custom search field, the result is only based on standard field. The value of custom field is not considered.
Is this a standard behaviour? Are standard fields given higher priority that custom fields?
Any pointers on this would be highly helpful.
Thanks,
Narendra

Hi Naren,
Did you add custom field using AET? If yes then while adding custom field using AET did you make it search and result relevant?
There is nothing like priority in standard SAP fields and custom fields.
Please let me know so that I can further help you.
Thanks,
Bhushan

How to restore safari search field in upper right corner ? Thanks

How to restore Safari search field in upper right corner of Safari home page ? Thanks.

Safari 6
In Safari 6 URL address bar and Google search bar are unified together.
Apple calls it " Smart search field".
Best.

How to pass custom search help(F4 help) for a field in ALV output?

Hi,
I want to activate the F4 help in ALV output for a field for which we do not have search help assigned at table ,data element and domain level.
In field catalog i have enabled it by below line.
ls_fcat-F4AVAILABL = 'X'.
but because there are no standard input help available it is giving message as "No input help is available".
so how to pass our custom search help (g_search) for any field in ALV output.
I am using object oriented ALV grid display.
Thanks!!!
Rajesh Gupta.

hi,
check this out:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b3d5e890-0201-0010-c0ac-bba85ec2ae8d
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/acdefb13-0701-0010-f1a2-8eeefa7d3780
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b3d5e890-0201-0010-c0ac-bba85ec2ae8d?quicklink=index&overridelayout=true

How to use customer-specific fields with FI-CA event 940?

The following text can be found under FI-CA event 940:
You can also set customer-specific fields if you have defined the predefined include for customer enhancements CI_FKK_ACCIT_CUS in the structure FKK_ACCIT_CUS. The fields included here must have the same field name as the fields included in the structure ACCIT. These can also originate from an enhancement of the coding block in General Ledger Accounting. The fields Reservation Class and Reservation Key of the reconciliation key and the totals record are available as import parameters.
My requirement is to populate the field HZUON in this event, which will be called when running t-code FPG1 (Transfer of FI-CA total records to general ledger)
The problem is the fact that the output of the event (i.e. output of function module FKK_SAMPLE_0940 at first) only have the following fields:
E_ZUONR     LIKE     ACCIT-ZUONR     Zuordnung (BSEG-ZUONR)
E_XREF2     LIKE     ACCIT-XREF2     Referenz (BSEG-XREF2)
E_SGTXT     LIKE     ACCIT-SGTXT     Positionstext
E_BUPLA     LIKE     ACCIT-BUPLA     Businnes Place (Korea only)
I tried adding a new field to structure CI_FKK_ACCIT_CUS and adding this field to the output of the event 940, but how do I ensure that the content of the field will be used to populate the HZUON field of the FI document during "transfer of FI-CA total records to general ledger"?
Cheers,
Teo

Hi Teo,
I happened to see this post from you when I searched for a similar scenario related to event 940. I also need to add two fields in CI_FKK_ACCIT_CUS and make these fields as outputof the event. Did you come across any solution for the same? If so, can you please share.
Regards,
Harikumar. S
Edited by: Harikumar Sasidharan on Dec 30, 2009 12:14 PM

How to populate customer specific field data in table /SAPAPO/ORDFLDS

Dear Gurus,
I have explained in detail about the problem we face. I guess persons who has implemented enhancement: /SAPAPO/RRP_IO_COL in their system can help me out.
Background:
Purchase requisitions in APO is created by an idoc that comes from a legacy system using BAPI CALL FUNCTION 'BAPI_POSRVAPS_SAVEMULTI3'.
Business Requirement:
I have a business requirement where I need to populate an additional data 'Original delivery date' from the idoc during PR creation in Product view.
Development:
To achieve the above requirement, we are following the below procedure in our development system.
1. We are using enhancement: /SAPAPO/RRP_IO_COL, method: RRP_USEX_COLS_FILL_01 and RRP_USEX_COLS_GET_TEXT_01 to display an additional field 'Original delivery date' in /sapapo/rrp3 - elements view. This field is restricted to Purchase requisition (Order category: AG) only. We are planning to populate the additional data 'Original delivery date' in this customer specific field and store it in table: /SAPAPO/ORDFLDS at the time of PR creation.
2. Table: /SAPAPO/ORDFLDS is appended with the 'customer specific field'.
3. We couldnt find a document on how the data can be populated in table /SAPAPO/ORDFLDS.
4. How to polulate the live cache data in the table '/APAPO/ORDFLDS' ? ( i.e using connection parameter )?
Appreciate if you can throw me some light on this.
Thanks
Vignesh M

Hi Vignesh,
ANy luck on this ? I am trying the almost same thing...and stuck at same point.
Please let us know if you have any more information.

IS-RETAIL: How to update custom enhancement field using BAPI?

Hi gurus,
Like ECC BAPI: BAPI_MATERIAL_SAVEDATA,
This BAPI(BAPI_MATERIAL_MAINTAINDATA_RT) is specific for IS-RETAIL to create and update material master data.
But now If I append one custom field "ZFIELD" to end of table MARA, my question is how to update this custom enhancement field(ZFIELD) using BAPI(BAPI_MATERIAL_MAINTAINDATA_RT)
Thanks in advance!

Hi DongHai,
I suggest you create your own BAPI. Just copy the codes in BAPI_MATERIAL_MAINTAINDATA_RT and add your custom fields. If you want to append the data of the custom field in table MARA, first, you have to create a structure table then goto SE11, type MARA and display. Click the APPEND STRUCTURE then choose the structure that you've created. Hope this will help.
Rewards if useful
Regards,
Mark

How to delete custom AET fields in CRM 7.0 Web UI

Hello gurus,
When I want to delete a custom AET field created by a mistake or for exercising purposes only, the UI Config tool markes it for deletion by changing a status to "Marked for Deletion" (a garbage bucket icon). My question is how to proceed further, i.e. eliminate the field completely. Do I need to manually delete the fields from the "Append" structures in the corresponding CRMS_xxxx Attribute structure, or do something like this?

Hi,
note: please do not delete the field manually from SAP GUI.
AET is able to create and delete custom field. The deletion process happens always in 2 steps.
1. you select which field you want to delete and press on delete icon. This will mark the field to be deleted.
As long, you do not "Save and Generate". This deletion mark will not be persisted and the complete deletion of the field will not be executed. Having this mechanism, you are always able to cancel the deletion.
2. If you really want to delete the field. Press on "Save and Generate". "Save" will persist the deletion mark for the field.
And "Generate" will do the "Delete" generation.
Please don't forget to remove the field from the UI configuration, when you configured the field in any UI Config before.
Regards,
Steve

How to populate custom table field value into standard DFF

Hi Gurus
I am newbie to the OAF
I have a requirement to populate the custom table field value into standard DFF. we enabled the DFF in ReqDistDFFOnAcct(po_req_distributions_all). On the requisition tab as soon as i click on the checkout button, the custom field value has to be shown in the requisition distributions DFF field along with the standard Columns like charge account, percent, qty and when we click on the next button, it has to hit the base table ie., po_req_distributions_all.
the standard columns data is showing the screen. how to acheive this requirement programatically
There is a EO for the req distributions table. please help me how to achevie this requirement.
Any help woud be greatly appreciated.
Thank You!
Krishna

Thanks Aj. Finally i made some progress....but i am getting an error in the inst_top OPMN folder 10/10/08 15:37:14 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml. I cleared the cache, bounced the webserver. Could not able to understand what is this error
Following is the code that i have written. I am not able to find out what is the error. please help me how to fix this error. there is no changes in the page and the value is not auto populating. the page is having the normal behaviour as the standard one.
Thanks in Advance for your help...
public class xxCheckoutDistsCO extends CheckoutDistsCO
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String UnitId="";
//First get the Application Module
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject vo = (OAViewObject)am.findViewObject("PoRequisitionLinesVO");
String Reqlineid="";
String Linenum="";
String DeliverLoc="";
if(vo.first() !=null)
Reqlineid= vo.first().getAttribute("RequisitionLineId").toString();
Linenum = vo.first().getAttribute("LineNum").toString();
DeliverLoc = vo.first().getAttribute("DeliverToLocationId").toString();
// if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
// pageContext.writeDiagnostics("TEST >", Reqlineid,1);
// pageContext.writeDiagnostics("TEST >", Linenum,2);
// pageContext.writeDiagnostics("TEST >", DeliverLoc,3);
UnitId=null;
String Querry="select amli_icx_oaf_utils.get_blding_unit_id (?,?,?) from dual";
try
PreparedStatement ps=am.getOADBTransaction().getJdbcConnection().prepareStatement(Querry);
ps.setInt(1,Integer.parseInt(Reqlineid));
ps.setInt(2,Integer.parseInt(Linenum));
ps.setInt(3,Integer.parseInt(DeliverLoc));
ResultSet rs=ps.executeQuery();
// ps.execute();
// am.getOADBTransaction().commit();
while (rs.next())
System.out.println(" Query Results ");
UnitId= rs.getString(1);
System.out.println(" first > ");
rs.close();
ps.close();
catch(SQLException a)
System.out.println(" Error "+a);
System.out.println(" Second > ");
System.out.println(" Third > "); ----the program is executing upto here...it is not setting the value after this.
OAViewObject povo = (OAViewObject)am.findViewObject("PoReqDistributionsVO");
if(povo.getCurrentRow()!=null ) --------If i remove this condition i am getting the nullpointer exception in page.....
System.out.println(" Fourth > ");
povo.getCurrentRow().setAttribute("Attribute12",UnitId);
// if(pageContext.isLoggingEnabled(OAFwkConstants.STATEMENT))
// pageContext.writeDiagnostics("TEST >", UnitId, 1);
Thanks
krishna

How to rename Custom Metadata Field?

I have some pics with custom metadata field "gadget brand", i with to rename the field name to "brand", how can i do that? I tried to rename in the custom metadata manager, but it doesn't apply the change.

Don't believe you it will allow you to rename it.
You're going to have to create a new field with the name you want and copy the data over. Unfortunately Aperture doesn't have any built in means of copying metadata from one field to another. Applescript however could do it fairly easily.

How to export custom metadata fields

How do I export custom metadata fields (or even the DATE) to a text or spreadsheet? Why does Aperture have dozens of metadata choices, but only allows a few to be exported?

You can try Automator which must be installed already in your computer. Create a new workflow, on the left pane select Aperture to see a list of actions, select "get selected items" and "extract metadata", and drag both to the right most pane. there you'll choose the Tag names to extract from the images already selected inside aperture and choose an output method, tabbed text should work fine for a spreadsheet. Hope it works.

How to hide custom metadata field in custom profies ??

hi,
how to hide custom metadata dropdown list in a custom profile based on choosing the security group.
ex: if i choose xxx security group, custom metadata dropdown should not appeared, for remaining security groups it should be visible.
so, Based on criteria, custom metadata should be hidden in custom profiles..
how to achieve it ?? where and how to configure ??
Detail guidance should be required
Thanks in advance

You cannot do this through profiles alone if I understand you correctly.
If I load a check in page, choose a security group and at this moment want a custom metadata field to disappear then you are beyond what profiles offers.
Rules evaluation can only be based on information that is know at the time the page is requested. That means in order for this to work you would need to make security group an non editable field and have a set of profiles for each security group.
The alternative is to customize the UI with soem DHTML or AJAX
Tim

How to use Custom Search in Dynamic Page or HTML Portlet ?

Gurus,
1. I have a tab called My Space in the portal web site, where user gets a personalized view of the content.
2. I am using custom attributes and custom item types. I have a custom attribute called 'Location', which is a attribute of custom item types.
3. I have 2 pages - News and Events.
4. All the content in News and Events page is tagged by the attribute 'Location'.
5. The requirement is to let the user search the News and Events by Location.
6. To achieve this I used the Custom Search portlet and the user can select the attribute Location and see the resultant News and Event items by location in the Search portlet.
7. The requirement is to present the News items and Event items in separate regions on the page and show only the first 5 News and Event items in the result and show a More link which would guide the user to rest of the News and Event items.
8. Eventually there may be more content other than News and Events tagged by location. If so, the requirement is to create a new region and display the new content.
9. How would I do this using custom search ? I was thinking if there is anyway I could use the custom search api (where can i find it ?) in the HTML portlet or Dynamic page and submit the result to IFRAMES in each region and show the output ?
Pls advise.
Thanx a bunch.

I would suggest that you use two custom search portlets; one for the news items and one for the events items. Switch the custom search portlets to "AutoQuery" mode and add the relevant criteria. On the results display tab of the the "edit defaults" screen, choose to show just 5 items.
To add a link to show the user mode results, I'd create two new pages that have just a single custom search portlet on it that is customised to show more of the results and maybe has the pagination links enabled.
Then I'd add two "Page Link" items underneath the two news and events portlets on the first page in an item region.
I'm sure there are other ways of doing this as well. Hope that helps to get you started.

How to build custom search using API - 10.1.2

Hi,
I have been looking through some documentation and i can't seem to find how to use the API in portal 10.1.2 to create a custom search. Any help or samples would be appreicated.
Thanks

The Search API is a new feature in 10.1.4. In older version a custom search portlet was provided, no API.
<br><br>
You can build a search engine yourself in Portal 10.1.2 by using the Oracle Text API. The search engine should implement security however which can be quit difficult to accomplish. It is not impossible however.
<br><br>
In most cases it is has less impact to upgrade to release 10.1.4 then to build a search engine yourself. My advice would be to install 10.1.4 on a test system and play around with the new search API. You can then decide whether it is worthwhile to upgrade to 10.1.4 where you profit from several nice new features.

How to embed custom search field in toolbar

Similar Messages

Maybe you are looking for