How to enable AMD Radeon R9 M295X on 5K iMac with Premiere Pro CC

Hello everyone,
I realize that the graphics card which comes with the 5K iMac (AMD Radeon M290X and M295X) is not one of the recommended cards for Adobe Premiere according to the System Requirements page on Adobes website.  At this point, I have not been able to enable the R9 M295X in Premiere.  What is the step by step process to accomplish this?
Thank you very much,
LC

There isn't a real "process" like there was in the CS-days. Then, there was a list put on your computer that PrPro read, and if the card it found was on the list, it used it. So ... if yours wasn't, you could find that file, edit it (it was a basic txt file) and add in the official hardware name of your card.
There is no such list for the CC versions of the Adobe DVA's. PrPro uses any card it recognizes has some usable parts for the work it's doing. So that part isn't "fixable". What you can do is check to see if you have the correct settings enabled for the card ... I think the nVidia cards use OpenGl and AMD OpenCL ... something like that? You do need to make sure that the correct one is enabled on your computer.
Neil

Similar Messages

  • How do I fix yellow spots on face and background with Premiere Pro/After Effects CS4?

    Hi,
    I have the CS4 version of pretty much all Adobe products.  I have to color correct and edit a video that was shot during a seminar inside a conference room with an average digital camera.  The camera zoomed in a lot on the subject when he was talking.  So, it's not the best quality video and I'm trying to make it look as nice as possible.  I've done some general color correcting and it looks okay, but there are a number of yellow spots on the subject and in the background, mainly on brownish surfaces (the speaker is African American).  This probably appeared because of the low picture quality and zoom, but how can I fix it?  When I do the general color correction, the spots just change color, but don't disappear.  I played around with different things, but couldn't fix it. Is there a way to do this with Premiere Pro or After Effects?  Or would it be very complicated?  Or not possible at all?  The camera zooms in and out a few times, too, so would that pose a problem for correcting this?
    Thanks for any info!

    It can be done in After Effects.
    Watch this tutorial:
    http://library.creativecow.net/devis_andrew/AE-Basics-52-Paint-6/1

  • Why AMD Radeon HD 6850 is not supported in Premiere Pro CC GPU Accelerated Features?

    Even the weaker AMD Radeon HD 6750 is supported...
    How do I find out if there is a plan to support it in the future?
    Regards

    While a few employees do read in some of these user to user forums, most of the people here are other users
    As such, we do not know Adobe's current or future plans

  • After Effects and enabling GPU with the AMD Radeon R9 M295X

    I have the new 27in iMac with an AMD Radeon R9 M295x. As far as I can tell, I am limited to CPU rendering in After Effects.
    I keep reading that GPU is available as long as I don't need CUDA and nVidia for Ray Tracing.
    As it is, I'm only seeing CPU available. GPU is grayed out.

    Show a screenshot of exactly what you're seeing that has you concerned. From your brief description, it seems that everything is functioning normally.

  • Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

    Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB

    Of note there is a new AMD Catalyst Omega driver released earlier in the week that brings 5K resolution to AMD graphics cards. Here is the link (support.ad.com/en-us/download) to the AMD site. But none of these work with my iMac (Retina 5K, 27-inch, Late 2014), Windows 8 bootcamp.
    Please advise.
    Thanks in advace.

  • Premiere pro CC2014 crashes on new imac with AMD Radeon R9 M295X

    Premiere Pro CC2014 starting up crashes with error "Premiere Pro could not find any capable video play modules"
    We use new iMac with OS X 10.10.1 and graphic card AMD Radeon R9 M295X 4096MB which is working faultlessly with all Adobe programs including Premiere Pro CC. Only Premiere Pro CC 2014 crashes and asks for viodeodriver.  No alterations can be made on iMac. Apple guarantees graphic card specifications.It seems to us obvious that PremierePro CC2014 is not compatible with this graphic card. We are completely stuck in our work for more than 2 week!! Does anybody can bring help? If necessary we can send crash report. Thanks!

    Discussion moved to Premiere Pro forum for quicker & accurate response.

  • On Boot Camp, the AMD Radeon R9 M295X is reporting "Code 43" Problems.

    I am on an iMac with Retina 5K display and in the latest build 9926, my graphics card is having problems. In the Device Manager the "AMD Radeon R9 M295X" is saying "Code 43: Windows has stopped this device because it has reported problems."
    There has been no updates for this in Windows Updates.
    I have installed the Boot Camp Support Software, but this did not fix the problem.
    My graphics card worked perfectly in Build 9879.

    Hi,
    In my opinion, since system threw the error message: "Code 43: Windows has stopped this device because it has reported problems." There is two possible reason of this problem:
    1. Driver compatibility problem, however, it's hard to make troubleshoot and fix this problem.
    2. Driver installed problem, we can resolve this problem by uninstall the problematic driver and reinstall a new version. You can follow the steps of the link below to reinstall the driver:
    https://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspx
    In addition, it would be better to use driver verifier to check current graphic card driver compatibility.
    https://msdn.microsoft.com/en-us/library/windows/hardware/ff545448(v=vs.85).aspx
    Roger Lu
    TechNet Community Support

  • Alpha transparency no longer working on iMac retina with AMD Radeon R9 M295X 4096 MB

    Purchased new retina iMac with all the trimmings, including AMD Radeon R9 M295X 4096 MB. Now all presentations with alpha transparency no longer have transparency!
    Having so many display issues with this new card. Anybody else with the same?

    I've found the issue. Sort of.
    The numerous display issues are a bug with the graphics driver (software) that cause problems with various software packages, such as Photoshop etc. Awaiting a fix from Apple.
    The Keynote problem is exactly that. I loaded Keynote on my non-retina macbook pro, and the same issue is there. Maybe Keynote or Yosemite.
    Found out that in order to restore transparency I have to select the image, select Alpha Channel, click on the image (after a couple of times I realised that there is no need to result the area to be transparent), and then it's back.
    Somehow the image needed to be reminded that it had an alpha channel.
    Yet another software bug.

  • Mercury Playback on 2014 iMac with AMD Radeon R9 M295X?

    After looking at the officially support list of GPUs located here System requirements | Adobe Premiere Pro I noticed that the AMD Radeon R9 M295X that comes in the new 2014 iMac with Retina Display is not specifically listed under "Mac" support. I was wondering if anyone can confirm if, despite not being listed, it is in fact supported?
    I am looking to upgrade my editing workstation and want to make sure it is fully supported for Mercury Playback.
    Thanks for the help!

    We have the new iMac with the AMD Radeon card and have had problems with it since we got it - particularly with Dynamic Link.  We have raised a support issue with Adobe who have been shoddy at coming back to us but have eventually confirmed (albeit only on the phone) that there is a know issue which "will be resolved in the next release of cc"  not holding my breath!

  • I need to reinstall my computer, how do I deal with Premiere pro and After effects?

    Hello,
    As my question states I need to reinstall my computer (laptop) and I'm not quite sure on how to deal with Premiere pro and After effects.
    I am thinking that I need to do some sort of backup and save my projects and footage on a sepparate drive.
    If I reinstall my computer, install my creative suit production premium, and move back all of my projects and footage, won't I have to re-link every single clip?
    I am currently workning on several different projects and having to re-link everything is something I don't even want to think about, that would take me days if not weeks.
    Another option on my mind would be to use Creative cloud. I do have the free version but I have never used it even once before and I'm not quite sure what the purpose of the cloud is and if this is a way to use it.
    I have no idea how to go about this computer reinstalation without either loosing tons of work or having to re-link every single clip used.
    I am videoediting only as a hobby so I have no experience working with other people and sharing projects or the like, wich is my understanding of what the cloud is for.
    Any and all help would be grealty appreciated, I know this is probably really easy but ever since i got my Suit I haven't reinstalled, upgraded och changed my computer so I am just clueless as to how to go about this.
    I have Creative suit production premium, I also have the free Creative cloud.
    It is only Premiere pro and After effects that I am using and am worried about.
    Thank you for any help.
    -Lisa Kajupank
    (and oh, I just notice my name - umustbejoking - I think I just wrote that cause they wouldn't let me use anything else, saying it was already taken. So nevermind that haha.)
    Message was edited by: umustbejoking

    If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
    If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (84620)

  • How can I synchronise my iTunes Library on my iMac with the one on my MacBook?

    How can I synchronise my iTunes Library on my iMac with the one on my MacBook?

    Carolyn:
    I have almost 10,000 songs/cuts in my music collection and, because of the poor quality of iTunes music, very few of those songs/cuts come from iTunes.  My music came from me ripping it disc by disc over hundreds of hours. I would like to be able to add a disc and have both the iMac AND the MacBook music files (plus an external backup) be updated.  Surely there is an intelligent, relatively easy to implement procedure for doing this. Perhaps I am missing something but your response doesn't seem to address the sync issue with all its implications...

  • How can I use Aperture 3 on my new iMac with Maverick?

    How can I use Aperture 3 on my new iMac with Maverick?

    Do you own a copy of Aperture, perhaps bought for another Mac?
    If you have not bought Aperture, you need to buy it from the AppStore.
    But if you own Aperture and have it bought from the AppStore on another Mac, sign into theAppStore on your new iMac with the same AppleID you used to buy Aperure on your other Mac.  Then look at the "Purchased" tab of he AppStore. It show Aperture, with the "Install" button to the right. Simply press the "Install" button and download it to your new iMac.  Or if you have bought Aperture on a CD/DVD, run the installer from the CD/DVD on your new mac and immediately run software update to upgrade the Aperture 3. version to version that will run with Mavericks.
    Léonie

  • How can I install Photoshop CS5 on a new iMac with no disc drive

    How can I install Photoshop CS5 on a new iMac with no disc drive?

    Hi,
    Please copy this Link http://trials2.adobe.com/AdobeProducts/PHSP/12/osx10/Photoshop_12_LS1.dmg?PID=2159997
    Now open Adobe.com and go to Products Trials. Click on Acrobat Try now and once the download page appears then paste the above mentioned link in the address bar and then press Enter. Download should start immediately.
    Please let me know if it helps.
    regards,
    Abhijit

  • How do I remove a blank line in a pdf with  adobe pro XI?

    How do I remove a blank line in a pdf with adobe pro XI?
    Can I combine text blocks into one paragraph that are now given line by line?
    Is there a way to add a paragraph to an existing pdf and have the remaining text flow to the next pages?

    You can't, no, and no. Acrobat is not a word processor, and trying to use it as if it is will lead to enormous frustration and disappointment. Maybe you need to convert this document to Word if you want to do this sort of editing, but don't expect fancy layout to be preserved.

  • How do I get my file into the time line in Premiere Pro CC?

    How do I get my file into the time line in Premiere Pro CC? I am use to Premier Pro CS6 and unfortunately my labtop took a crash and I lost all of my adobe products. I wanted to check out a trial version and I cannot seem to find one for CS6! Please Help Me! My project is due tonight!!!!!

    Hi Aneumann,
    Welcome to the Forums.
    You have to just right click on the clip imported, in the project panel and select new sequence from clip. You can also go to file menu>new>sequence and create a sequence and then drag the clips after importing them , into the timeline.
    Regards,
    Vinay

Maybe you are looking for