How to enable Design tab in jdeveloper 11.1.1.5.0

Hi ,
I am creating the SelfRegistration work-flow.While opening the xml files in the jdev,the design tab is not there.Only source and history tabs are there.how to enable that one.
Pls anyone suggest me ...
Jdeveloper version-11.1.1.5.0
Regards,
Deena.

well user,
why are you creating such duplicate.
Re: Unable to find Design tab in jdeveloper 11.1.1.5.0
well our discussion is going on above thread.. but why are switch another thread.

Similar Messages

  • How to enable reresizing tabs after closing tab?

    How to enable reresizing tabs (like in older version than 5) after closing tab without mouseout?

    You can use one of these extensions to set a default font size and page zoom on web pages:
    * Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    * NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • How to enable purchasing tab in BOM, while defining bom for a item

    dear gurus,
    while defining a bom for a item, there ae various tabs like main, effectivity, OM etc. among that purchasing tab is in disabled state. how to enable that.
    pls provide setup and whats actual use of that.
    waiting fr reply.

    Dear,
    For a phantom assy the special procurement key in the material master should be 50. You have done the right thing.
    But in the BOM of FERT please remove the phantome assy Off indicator. Once you maintained the special procurement key 50 in material master, the phantom indicator will be acutomatically set in the high level bom.
    Hence if you activate the phantom assy off then this will override the phantom indicator
    For more understanding please see trhe below links
    http://www.sap-img.com/production/what-exactly-is-a-phantom-item-or-assembly-means.htm
    Regards,
    R.Brahmankar

  • How to enable PMD tool in JDeveloper 10.1.3.3.0

    Hi,
    I have installed Oracle JDeveloper 9.0.3 and I require the PMD tool (used for executing java files for specific standards) to get installed in the same IDE. After downloading the appropriate version of PMD tool, I have tried pointing the executable PMD jar file in the Jdev where it is not able to identify the tool only. Please pour your suggestions how to make JDeveloper to recognize the PMD tool ?
    Thank You,
    Thiyagarajan
    Edited by: user628911 on Mar 23, 2009 10:16 PM

    Hi,
    I am trying to use PMD version 4.2.2.0.0 for JDeveloper 10.1.3.3.0.
    I am in need to use a set of defined rules in the form of XML file to execute the code for the standards violation.
    But after installing PMD in JDeveloper, it was listing out a set of rules (Navigation : Tools -> Preferences... -> PMD (in left side pane)) comes along with the PMD version and not letting the custom file to get pointed.
    Please help me in how to get the XML file to be identified by the application ? Its very urgent, your suggestions are highly appreciated.
    With Thanks,
    Thiyagarajan
    Edited by: user628911 on Mar 23, 2009 12:24 AM

  • How to enable Command-Tab to switch applications

    I just upgraded to Lion from Snow Leopard in my iMac, but for some reason Command-Tab is not working.
    I already restarted the computer and checked the option (it was already checked) System Preferences / Mission Control and tick "When switching to an application ...", but still not working.
    What can I do ?

    There is nothing to enable. The option you checked has nothing to do with the application switcher.
    You could look through the keyboard shortcuts and see if anything has hijacked that shortcut.
    Try starting up holding down the shift key. That will start up in safe mode and disable any third-party programs that might be affecting it. It also does a disk check, so it takes some time. See if it works in safe mode. If so, try restarting normally and see if it still works.
    If it works in safe mode, then it is likely you have something that is interfering with it.
    As another troubleshooting step is to log in as another user. If it works there, then you have something in your particular user setup that is causing the problem. If it doesn't work, then it is a system-wide problem.

  • How to enable Navigation tab in PDF

    Hi,
    Can any one help me on this.
    I have nearly 100 PDF document. When I open the PDF,  the pdf should opened with Bookmark  view.
    I found this option under Document Properties --> Initial View --> Navigation tab  (Bookmarks Panel and Page).
    But i need to automate this task for all pdfs as Action list. can anyone help me to write a code for this.
    Thanks,
    Gopal

    Thanks Gilad.
    But I am unable to find this optin under Document processing.
    I am using Acrobat 9 Pro version.
    Please help me on this.
    Thanks,
    Gopal

  • How to enable delete tab to work in bridge cc?

       The delete tab on the keyboard does not work in Bridge CC.
    When I hit ctr.-delete, it still does not function.

    Try to reset preferences it may help:
    Quit the application. Launch Bridge and IMMEDIATELY hold down Ctrl + Alt + Shift (Windows) or Command + Ctrl + Option + Shift (Macintosh), when Rest Setting dailog box open select Reset Preferences.
    Also Ctrl-Delete it may be use to other OS system shortcut.

  • How to enable Billing plan tab in sales order (lean) with NWBC

    Dear All,
    The Billing plan tab in sales order (lean) is not availabe with NWBC. How to enable this tab?
    Is there is any documentation to do the modifications of NWBC's webdynpro screens?
    for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
    So I want to include the few missing tabs for data entry.
    any documentation or solution?
    thanks in advance,
    Suresh Yerra.

    Dear All,
    Is there is any documentation to do the modifications of NWBC's webdynpro screens?
    for example, there is a standard webdynpro screen in NWBC from SAP best practices to create sales order (lean). The lean sale order screen having restricted elements and tabs when compare with standard SAP GUI (t code va01).
    So I want to include the few missing tabs for data entry.
    any documentation or solution?
    Thanks,
    Suresh Yerra.

  • How to enable the prebooking tab in ESS

    Hi,
    In our environment, the prebooking tab is disabled in ESS. Please advise how to enable this tab. Where to do this configuration (e.g. in ESS or R/3)
    Regards,
    Tony

    Hi Tony,
    Please refer to the 2 notes below for some information on prebooking in ESS
    593044:  PV7I/PV8I: Documentation of the prebooking functions
    576203:  ESS: Activation of the prebooking in the Training
    Hope this help
    Sarah

  • Design tab of UIX page in JDeveloper 10g

    I am using JDeveloper 10g (Build 9.0.5.1) and JHeadstart 9.0.5.1.11. I have generated a small application using the Application Generator but the UIX page generated does not display in the Design tab - rather a message saying that "The document is not in a valid state". Am I doing something wrong here or is this expected behaviour ??
    Cheers,
    Brent Harlow

    Brent,
    Yes, this a known limitation, dcoumented in the release notes:
    3601291: UIX: Errors are displayed in the structure pane of JDeveloper when clicking on a UIX page, for example: Element templates: findPage not defined in parent content. Also, when opening the UIX Design Editor the following text appears: The document is not in a valid state. Please edit this file in the code editor to resolve syntax problems and then return to the visual editor.
    This does not cause any runtime problems.
    The behavior is caused by the fact that JHeadstart does not use UIX in the default manner, and is therefore not correctly interpreted by JDeveloper 10g.
    This will be fixed with the JHeadstart release that uses ADF.
    Steven Davelaar,
    JHeadstart team.

  • How to enable vat register tab in define reporting entities.

    Hello All,
    How to enable vat register tab in define reporting entities.
    Navigation --> Italian AP Localizations --> EMEA vAT SETUP--> Define Reporting Entities .
    Under EMEA VAT Reporting entities setup screen there are 3 tabs (configuration, Allocation rules, VAT Register).
    We have to enable VAT Register..
    Could you please help us on this.
    Immediate response is highly appreciated.
    Thanks
    Vijayakumar

    Hi,
    1. Can you please check the method set_selection_mode in your context node implementation class?The code there should be along the foll lines:
    IF iv_selection_mode IS INITIAL.
    * multi select table if not specified otherwise
        CALL METHOD super->set_selection_mode
          EXPORTING
            iv_selection_mode = selmode_multiedit.
      ELSE.
        CALL METHOD super->set_selection_mode
          EXPORTING
            iv_selection_mode = iv_selection_mode.
      ENDIF.
    2. You can set the selection mode as SELMODE_SINGLE or SELMODE_MULTI (depending on your requirement) via the DO_VIEW_INIT_ON_ACTIVATION method in the view controller impl class.
    typed_context->result->set_selection_mode(
           iv_selection_mode = cl_bsp_wd_context_node_tv=>SELMODE_SINGLE ).
    Regards,
    Nisha

  • How to enable MUltiple asset tab in T.code ABT1N

    Hi,
    We need to transfer assets from company 1 to company 2 and we are using the T.code ABT1n for this is intercompany transfer.
    1.I want to know how to enable the Multiple assets tab in T.code ABT1N
    2.Then when I transfer of 1 asset  with( NO REVENUE) I am receiving an error that DATA INCONSISTENCY: NO REVENUE ENTERED.
    3.Third point is when I Transfer of 1 asset (WITH REVENU) I get the following error like ACCOUNT CLEAR>REVENUE SALE TO AFFILIATED COMPANY COULD NOTBE FOUND>
    Can someone who is expert in this area can help me out.
    Thanks in advance

    I wonder as well if you found out an answer?
    Best regards, Johanna

  • How to enable script debugger in adobe LC designer

    Hi,
    Can anybody tell me how to enable script debugger in adobe livecycle designer. Can we debug the java scripts in adobe desiger..if yes, then please let me know how do i do it.
    I want to  debug the code line by line.
    Regards
    Sunil

    Designer doesn't have a debugger like Acrobat.
    The script editor can check only if the syntax is correct.
    You generally can use the PDF-Preview to debug JavaScripts when  Acrobat is your current PDF-Viewer.
    Add this code in you script where you want to start debugging. It will call Acrobat's JS Console
    debugger;
    console.show();

  • JDeveloper Design tab stopped working

    Hello,
    Once upon a time
    Without an obvious reason
    My JDeveloper 11R2 design tab stopped working. It's just showing me page blocks instead: http://img827.imageshack.us/img827/5954/designbroken.png
    Preview tab is also broken: http://img688.imageshack.us/img688/7563/designbroken2.png
    It is just a JSF facelets page, nothing unusual. And it is not only this page, but all of them, so it is IDE trouble, not my code.
    Tried to restart. Tried to reboot. Nothing.
    On runtime everything's fine.
    I really wouldn't like to reinstall JDeveloper and resotre all the IDE and IntegratedWebLogic configutration back again.
    Is there any hope for solvation?
    Thanks.
    Studio Edition Version 11.1.2.1.0
    Build JDEVADF_11.1.2.1.0_GENERIC_110907.2314.6081
    Windows 7 x64

    Hello Shay,
    Yes, it also happens for a new application. Here's what I see for a blank page in a new app:These ADF Library jar items are now in ViewController.jpr
       file:/D:/JDeveloper-11.1.2.1/jdeveloper/adfv/jlib/oracle-page-templates.jar
    WARNING: Unable to initialize <servlet> Faces Servlet. Check project libraries configuration.
    java.lang.IllegalStateException: Application was not properly initialized at startup, could not find Factory: javax.faces.context.FacesContextFactory
         at javax.faces.FactoryFinder$FactoryManager.getFactory(FactoryFinder.java:804)
         at javax.faces.FactoryFinder.getFactory(FactoryFinder.java:306)
         at javax.faces.webapp.FacesServlet.init(FacesServlet.java:166)

  • How to enable ojc compiler in new oracle jdeveloper 11g IDE

    Hi,
    we can compile java files using ojc compiler in Jdeveloper 10g IDE.
    I need this option in New Jdeveloper 11g IDE.
    Can any one tell me how to enable the ojc compiler? ( I need detailed steps to enable ojc compiler)
    I got class version error while i compile using javac in new Jdeveloper 11g IDE.
    (Class file size also differ from both compiler)
    So that, I want ojc compiler in new Jdeveloper 11g IDE.
    Regards,
    Karthi
    Edited by: user12957451 on May 4, 2010 1:09 AM

    I guess you can't. The ojc compiler is not part of jdev 11g, javac is the tool of choice.
    Timo

Maybe you are looking for