How to enable/download/display hindi/marathi language in bb9790 bold os 7.1

Please help on display/enable hindi lang in bb9790 bold os 7.1. Before os upgrade i was able to see msgs bt I'm not able to see them now. All appears as black box. Plz suggest

Hi and Welcome to the Community!
You need to ensure that you have an OS package installed to your device that contains the language you desire, as well as ensure that you have on your device fully activated the language. The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
Please use this KB as reference to make your selection:
Article ID: KB05305 Localization support for BlackBerry smartphones
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • How to enable downloading of an Attached File at the Client End

    Hi
    In the process of enabling File Attachment in my Email Service (using Servlets), I have been able to upload the file chosen for attachment.
    Now I am facing the following 3 problems :-
    1. How to enable the client to download his file from his broser ?
    2. How to provide features of uploading multiple files, as till now i have been able to upload only a single fiel ?
    3. I don't want the files to be uploaded as soon as i press upload. Instead I want all files to be collected in a list box and then be uploaded together when i press Attach.
    If anybody has any information, then please send that ASAP.
    thanx

    go there
    http://forum.java.sun.com/thread.jsp?forum=45&thread=155600

  • PPOSE - how to enable to display custom relationship

    We are implementing dotted-line relationship. Need to be able to display it via PPOSE. At my previous engagement 6-7 years ago we had this done, but I can't remember how (it was done before I joined).
    So the specific example is, we configured a custom relationship to S-S (dotted line). PPOSE has a few standard delivered views in the data section in the upper right (Managerial Assignment, Organizational Assignment, PBC: Notes, Reporting Structure, Staffing Analysis, Task Assignment).
    What we're looking for is to add a custom view like the above or if there's a way to customize one of the above views.
    Any insight is greatly appreciated!
    BR, Gary

    Gary,
    You need to set up custom service and link it in scenario of Hierarchy Framework configuration using tcode OOFRAMEWORKCUST or via IMG. In the custom service link it to evalucation path such that it will handle S-S (reporting to) relationships.
    These threads might be helpful :
    [Organizational Management PPOSE-PPOSE scenario maintenance]
    regards
    Sridhar

  • How to enable download option on the dashboard?

    Hi All,
    I am unable to enable my download option on the dashboard.
    can anyone help me in this.
    thnx in advance.

    Hi...
    No thanks,
    but need to close the thread and mark correct/helfpful to the correct reply given to you... ;)
    I also observed all your threads were not closed yet...
    are those not answered or.. you forgot to close them?
    just check... and close all the threads, so that others easily can refer your thread..
    Remember you are helping others indirectly which has same issue like you... ;|
    Thanks & Regards
    Kishore Guggilla

  • How to enable download option in flash website

    Hii
    Can someone help me out in enabling the download options for [ringtones and images] from the website developed using flash CS4 [AS3] .
    Thanks ,
    Gayatri

    Look into using the FileReference class and its download() method.  There are examples in the Flash documentation that should help you.

  • How to enable download in background?

    Everytime I start downloading something and go to HOME by pressing home button or open another app, the ongoing download fails. This problem does not occurs if I keep firefox opened.
    Duplicated: [/questions/1027956]

    HI aniksau,
    Is it possible to leave the browser running in the background?

  • How to enable trackpad handwriting in other languages?

    Is trackpad handwriting only for Chinese?
    I'm looking for Vietnamese. Is there a program or app I can use for this?

    As far as I know, only Chinese (not even Japanese) is supported so far.

  • How to download latest hindi movie songs mp3 free in my iphone 4s

    How to download latest hindi movie songs mp3 free in my iphone 4s  and also how can i download free hindi mp3 on my windows and then transfer it to my iphone music section

    Music syncs to your phone from your computer via iTunes.
    Read the manual.

  • Download movies in italian language on iTunes living outbroad

    Hello everyone. I'm Mattia, I'm italian but I live in France. I would like to buy movies from iTunes in Italian language but I can purchase movies only from iTunes France beacause my credit card works on a french circuit only and it doesn't work on iTunes Italia.
    How can I download movies in Italian language from iTunes France? Is there any solution for this?
    Thanks in advance!

    You can only buy content from your own country's store, so if you are in France then you can only buy from the French store. Some films might have multiple audio tracks on them - what language(s) a particular film is in should be listed on its description page in the store e.g.
    If there is a particular film that you'd like the Italian version of then you can try requesting that it be added to the French store, but ultimately it's the film studio that will have to grant Apple a license to sell it there : http://www.apple.com/feedback/itunes.html
    If a film does have different audio options then this page explains how to select the one that you want when watching it : http://support.apple.com/kb/HT5562

  • How to enable middle eastern language support in Illustrator cs6?

    how to enable illustrator cs6 to support middle east? 
    i have enable this option on photoshop cs6 and in InDesign cs6
    but not in illustrator cs6,
    please help
    (i download the master collection cs6 trial version)

    I know in In Design you can have a template file set up with a right to left text box which can be copied into any version of In Design and used for Arabic text.
    If you can get hold of an Illustrator file set up in the ME version this may work too.
    I only rarely typeset Arabic in small quantitys so this is a good workaround for me.
    All the download links are now broken by the way Ivan =)
    Nick
    There are plugins available also for non ME versions which will help you if your budget won't stretch to another full adobe release;
    Multi language text input and editing, ScribeDOOR for Adobe Illustrator CS5.1 and CS6;
    http://www.winsoft-international.com/en/downloads/print-free-downloads.html
    World Tools from in-tools.com provides the same functionality for In Design;
    http://www.in-tools.com/products/plugins/world-tools/
    Message was edited by: nickrhodes

  • Firefox upgrade once downloaded displays a blank browser window...how can I fix?

    Firefox upgrade once downloaded displays a blank browser window...how can I fix?

    Are you using the Firefox 33.0.1 version?
    *Help > About
    You can find the full version of the current Firefox 33.0.1 release in all languages and for all Operating Systems here:
    *https://www.mozilla.org/en-US/firefox/all/
    You can check if you can start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key.
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • How to enable excel downloading in ALV grid report.

    Hi all,
    How to enable excal downing in ALV grid report?
    Thanks in Advance.
    Siva Sankar.

    hi
    check the following code
    Example of a Simple ALV Grid Report
    REPORT  ZTUFI091                                .
    *& Report  ZDEMO_ALVGRID                                               *
    *& Example of a simple ALV Grid Report                                 *
    *& The basic requirement for this demo is to display a number of       *
    *& fields from the EKKO table.                                         *
    *REPORT  zdemo_alvgrid                 .
    TABLES:     ekko.
    type-pools: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
          gd_tab_group type slis_t_sp_group_alv,
          gd_layout    type slis_layout_alv,
          gd_repid     like sy-repid,
          gt_events     type slis_t_event,
          gd_prntparams type slis_print_alv.
    *Start-of-selection.
    START-OF-SELECTION.
    perform data_retrieval.
    perform build_fieldcatalog.
    perform build_layout.
    perform build_events.
    perform build_print_params.
    perform display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
    There are a number of ways to create a fieldcat.
    For the purpose of this example i will build the fieldcatalog manualy
    by populating the internal table fields individually and then
    appending the rows. This method can be the most time consuming but can
    also allow you  more control of the final product.
    Beware though, you need to ensure that all fields required are
    populated. When using some of functionality available via ALV, such as
    total. You may need to provide more information than if you were
    simply displaying the result
                  I.e. Field type may be required in-order for
                       the 'TOTAL' function to work.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
    fieldcatalog-do_sum      = 'X'.
    fieldcatalog-no_zero     = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      fieldcatalog-col_pos     = 5.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-datatype     = 'CURR'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    form build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
    gd_layout-totals_only        = 'X'.
    gd_layout-f2code            = 'DISP'.  "Sets fcode for when double
                                            "click(press f2)
    gd_layout-zebra             = 'X'.
    gd_layout-group_change_edit = 'X'.
    gd_layout-header_text       = 'helllllo'.
    endform.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
                i_callback_top_of_page   = 'TOP-OF-PAGE'  "see FORM
                i_callback_user_command = 'USER_COMMAND'
               i_grid_title           = outtext
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
               it_special_groups       = gd_tabgroup
                it_events               = gt_events
                is_print                = gd_prntparams
                i_save                  = 'X'
               is_variant              = z_template
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    form data_retrieval.
    select ebeln ebelp statu aedat matnr menge meins netpr peinh
    up to 10 rows
      from ekpo
      into table it_ekko.
    endform.                    " DATA_RETRIEVAL
    Form  TOP-OF-PAGE                                                 *
    ALV Report Header                                                 *
    Form top-of-page.
    *ALV Header declarations
    data: t_header type slis_t_listheader,
          wa_header type slis_listheader,
          t_line like wa_header-info,
          ld_lines type i,
          ld_linesc(10) type c.
    Title
      wa_header-typ  = 'H'.
      wa_header-info = 'EKKO Table Report'.
      append wa_header to t_header.
      clear wa_header.
    Date
      wa_header-typ  = 'S'.
      wa_header-key = 'Date: '.
      CONCATENATE  sy-datum+6(2) '.'
                   sy-datum+4(2) '.'
                   sy-datum(4) INTO wa_header-info.   "todays date
      append wa_header to t_header.
      clear: wa_header.
    Total No. of Records Selected
      describe table it_ekko lines ld_lines.
      ld_linesc = ld_lines.
      concatenate 'Total No. of Records Selected: ' ld_linesc
                        into t_line separated by space.
      wa_header-typ  = 'A'.
      wa_header-info = t_line.
      append wa_header to t_header.
      clear: wa_header, t_line.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
           exporting
                it_list_commentary = t_header.
               i_logo             = 'Z_LOGO'.
    endform.
          FORM USER_COMMAND                                          *
          --> R_UCOMM                                                *
          --> RS_SELFIELD                                            *
    FORM user_command USING r_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
    Check function code
      CASE r_ucomm.
        WHEN '&IC1'.
      Check field clicked on within ALVgrid report
        IF rs_selfield-fieldname = 'EBELN'.
        Read data table, using index of row user clicked on
          READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
        Set parameter ID for transaction screen field
          SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
        Sxecute transaction ME23N, and skip initial data entry screen
          CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
        ENDIF.
      ENDCASE.
    ENDFORM.
    *&      Form  BUILD_EVENTS
          Build events table
    form build_events.
      data: ls_event type slis_alv_event.
      call function 'REUSE_ALV_EVENTS_GET'
           exporting
                i_list_type = 0
           importing
                et_events   = gt_events[].
      read table gt_events with key name =  slis_ev_end_of_page
                               into ls_event.
      if sy-subrc = 0.
        move 'END_OF_PAGE' to ls_event-form.
        append ls_event to gt_events.
      endif.
        read table gt_events with key name =  slis_ev_end_of_list
                               into ls_event.
      if sy-subrc = 0.
        move 'END_OF_LIST' to ls_event-form.
        append ls_event to gt_events.
      endif.
    endform.                    " BUILD_EVENTS
    *&      Form  BUILD_PRINT_PARAMS
          Setup print parameters
    form build_print_params.
      gd_prntparams-reserve_lines = '3'.   "Lines reserved for footer
      gd_prntparams-no_coverpage = 'X'.
    endform.                    " BUILD_PRINT_PARAMS
    *&      Form  END_OF_PAGE
    form END_OF_PAGE.
      data: listwidth type i,
            ld_pagepos(10) type c,
            ld_page(10)    type c.
      write: sy-uline(50).
      skip.
      write:/40 'Page:', sy-pagno .
    endform.
    *&      Form  END_OF_LIST
    form END_OF_LIST.
      data: listwidth type i,
            ld_pagepos(10) type c,
            ld_page(10)    type c.
      skip.
      write:/40 'Page:', sy-pagno .
    endform.
    hope it will help you
    regards
    sreelatha gullapalli

  • Display Data in Marathi Language

    I have used jquery to print data in html report, data display in marathi laguage in .aspx page , but when pessing print button it will be display in english laguage, so how what i do display data in marathi laguage,
    The data is like,
    <link href="js/jquery-ui-1.10.4.custom.css" rel="stylesheet" type="text/css" />
        <script src="js/jquery-1.10.2.js" type="text/javascript"></script>
        <script src="js/jquery-ui-1.10.4.custom.js" type="text/javascript"></script>
        <script type="text/javascript">
            function PrintDivContent(divId) {
                var printContent = document.getElementById(divId);
                var WinPrint = window.open('', '', 'left=0,top=0,toolbar=0,sta­tus=0');
                WinPrint.document.write(printContent.innerHTML);
                WinPrint.document.close();
                WinPrint.focus();
                WinPrint.print();
            $(document).ready(function () {
                $("body").keyup(function (e) {
                    var nkeycode = null;
                    nkeycode = e.keyCode;
                    if (nkeycode == 115) {
                        $("#btnprint").click();
                $("#btnprint").click(function () {
                    PrintDivContent('divtoprint');
        </script>
    <div id=>
    //data
    </div>
      <table>
            <tr>
                <td>
                    <input type="button" id="btnprint" value="Print (F4)"  />
                </td>
            </tr>
        </table>

    Please post questions related to web development in the ASP.NET forums (http://forums.asp.net ).

  • HT4539 how to enable my apple id on iTunes? Somehow its disabled and I can no longer download Apps on my IPhone ??

    how to enable my apple id on iTunes? Somehow its disabled and I can no longer download Apps on my IPhone ??

    Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
    Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    If it then works on your computer's iTunes but not your phone then try logging out of your account on the phone by tapping on the id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it

  • How to Download displayed output to Excel Using Bsp Application

    Hi Experts,
    please give me some idea because I am New In BSP.
    How to Download displayed output to Excel Using Bsp Application.
    If any sample code please do send me.
    In my condition I am getting data in  2-3 table view formats on one page and i want download that in Excel.
    please help me.
    Regards & Thanks,
    Yogesh

    Hi,
    This is more a question for the BSP forum.
    Anyway, as such it's realy easy since you can use HTML in order to import to Excel. All you need to do is add
    runtime->server->response->set_header_field( name = 'Contnet-Type'
    value = 'application/vnd.ms-excel' ).
    runtime->server->response->delete_header_field( name = 'Cache-Control' ).
    runtime->server->response->delete_header_field( name = 'Expires' ).
    runtime->server->response->delete_header_field( name = 'Pragma' ).
    Also check threads like
    Download BSP data into Excel
    export bsp-table to excel
    Export BSP Table to Excel
    Eddy
    PS. Reward useful answers and earn points yourself

Maybe you are looking for

  • How do I get icloud backup dialog box to disappear off my iPad?

    My ipad is showing a dialog box on my home screen that says that it has not been backed up to icloud in 3 weeks and that I need to be locked and connected to WIFI to back up.   There is a OK button that I continue to press but the box won't go away o

  • Tab labels are grayed out except for active tab. This was not always the case. How to fix this?

    I recently had the 29 upgrade forced on me. I did not like the new lay out. I was trying different things and I hit the restore defaults button. After I did this, any tabs that I had open that were not the active tab, the labels was grayed out. I wan

  • Imac firewire cable

    Hi all I was given a imac CRT 600mhz and the prior owner included a cable with firewire connection at one end and the other end I'm not sure what it connects to but it has a small female port connector with apple icon. It looks like a cable for camco

  • UCCX 8.0.2 CCX Engine in service But State Of some services are shutdown

    Hi I used UCCX 8.0 for My Contact Center and it works properly but some service of ccx engine as list below are shutdown. 1. Bootstrap Manager 2. Log Manager 3. Cluster Manager 4. RTP Port Manager 5. Executor Manager Can anyone help me???

  • Value Object Pattern - Does EJB 2.0 Deprecate?

    In the EJB 1.1 specification, there were no such things as Local Interfaces and Local Home Interfaces. In the Core J2EE Patterns book, they cite the main reason for using the Value Object Pattern as being a way to avoid much of the network overhead a