How to enable FTP service in Solaris 10

Hello, Everybody
I installed my first Solaris 10 today, but I have a problem with FTP process, I found I could not ftp to my new server from other equipments. It seems that FTP service is disabled by default.
Could you any guy tell me how to enable FTP in Solaris 10?
Thanks in advance.
-jason

Since the OS is Solaris 10, how about using SMF's svcadm tool to enable/disable ftp service.
eg.,
# svcadm disable /network/ftp
# ftp localhost
ftp: connect to address 127.0.0.1: Connection refused
Trying ::1...
ftp: connect: Network is unreachable
ftp> bye
# svcadm enable /network/ftp
# ftp localhost
Connected to localhost.
220 sunfire.anonymous.com FTP server ready.
Name (localhost:giri): 331 Password required for giri.
Password:

Similar Messages

How to install ftp service on the system?

OS: SuSE Linux Enterprise Server 8
How to install ftp service on the system?
How to check and modify to use it?
I am not able to use FTP.
Regards,
D

Rohit,
If its about installation/Deployment of Agent- then its through SDM,
'configuration' can be manual or Atuomatic:
Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
Thanks,
Jagan

How to enable the iscsi in Solaris 10

Dear All,
Kindly help me,How to enable the iscsi in solaris 10,That box already running in solaris 9,Now we installed solaris 10,In that solaris box separate iscsi card in there,How to enable the iscsi card to access the NAS storage.
Kindly sent any related PDF document to "[email protected]"
Thanks in advance,.
Regards,
Venkatachalam.M

Kindly answer the above question please.
Regards,
Venkatachalam.M

How to enable bonjour, services indicate it is on automatic

how to enable bonjour
services indicate it is on automatic

Bonjour is Apple's implimentation of Zero Configuration networking and is the services discovery networking technology used by all Apple hardware and software. It is turned on and used automatically when the various sharing services are activated on your Apple computers and connected devices.
What is the problem you are having?

How I enable network service of Oracle database 10g XE ?

Hi,
How I enable network service of Oracle database 10g XE ?
Following error occurs when printing:
ORA-20001: The printing engine could not be reached because either
the URL specified is incorrect or a proxy URL needs to be specified.

ORA-20001 is a user defined error. So you will have to find out where it comes from.
Regards
Marcus

How to Enable Remote services using the GPO for the Client Machines

How to enable remote Access services on Client machines using the Group Policy. After enable how to access with out switching the users remote as administrator

Hi,
If you use windows server 2003, we can refer to the following link to enable remote access services on Client machines using the Group Policy:
Enable or disable Remote Desktop
http://technet.microsoft.com/en-us/library/cc727977(v=WS.10).aspx
If you use windows server 2008 and later version, we can refer to the following link to enable remote access services on Client machines using the Group Policy:
How to Enable or Disable Remote Desktop via Group Policy Windows 2008
http://social.technet.microsoft.com/wiki/contents/articles/4980.how-to-enable-or-disable-remote-desktop-via-group-policy-windows-2008.aspx
After you enable
Allow users to connect remotely using Remote Desktop Services policy setting, users who are members of the Remote Desktop Users group on the target computer can connect remotely to the target computer by using Remote Desktop Services.
So if you want users to access computer remotely, you need add users as members of the Remote Desktop Users group on the target computer.
About how to add users to the Remote Desktop Users group, please refer to the following link:
Configure the Remote Desktop Users Group
http://technet.microsoft.com/en-us/library/cc743161.aspx
Best Regards,
Erin

How to enable Enterprise services

Hi guys
started leanring about SOA. We are currently on ECC 6.0 with the latest support packs. Is there anything that needs to be installed for the ESOA / web services to work or do they come as default with ECC 6.0 and higher. Do i need to ask the basis guy to install any thing specifically so that the services are avialable?
appreciate any help on this question

Hi Gogol
have a look on these links
How to map business process and enterprise service?
Realationship enterprise service <-> application/entity service
<b>Enabling Enterprise Services</b>
http://help.sap.com/saphelp_nw04s/helpdata/en/80/be7042f1e6d242e10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/150f2714-0b01-0010-d68b-c976073b90cb
Thanks !!!
Regards
Abhishek

C6180 how to enable web services

Hi
c6180 w7 64 bit
Trying to set up HP eprint home&biz on ipad3
1.how do you enable web services
2.when trying to map network drive, computer can't find the "Folder" address i enter, taken from the eprint " saved files" display on the ipad
Thanks

Hello there again, hope you are doing well;
Let's start by Uninstalling any HP All-in-One software.
I will problaby do this in safe mode to ensure that no drivers or proccesses are in use at the time that you are installing the printer.
On the Windows taskbar, click the Windows icon ( ), click Control Panel , and then double-click Programs and Features .
Click the following HP software components, click Uninstall near the top of the window, and then click Next to uninstall the software.
HP Deskjet/Photosmart/All-in-One software
HP Imaging device functions
HP Customer Participation program
HP Solution Center
HP Photosmart Essentials
I will prefer for you to use this Tool to reinstall the printer CLICK HERE.
Before continuing I will  suggest you to disable all security applications (including Windows firewall ) to eliminate the some component of the software being quarantine or block. after disabling all security applications,
See if the problem is solved. if not continue.
Change the DNS server to Google's public DNS which is 8.8.8.8 and 8.8.4.4 for the secondary or alternate DNS (second DNS server) does your printer have an static IP address. If not let's set that as well, uninstall and reinstall the printer,  by the way this is the main support page for your printer if you need it for future reference GO HERE
Let's print a Network configuration page,
Press the Setup button ( ) on the front of the product.
Press the Down Arrow button ( ) to highlight Network , and then press OK .
Press the Down Arrow button ( ) to highlight Wireless Network Test , and then press OK .The Wireless Network Test Report prints.
On the test page, find the IP address.
Example IP address on the network configuration page;
If the product IP address on the test page is 0.0.0.0 or 169.254. XXX. XXX , this means that the HP product is not connected to the network. Continue to the next step to set up the product on the wireless network. If the product IP address on the test page is not 0.0.0.0 or 169.254. XXX. XXX (for example, 192.168.0.5), this means that the HP product is connected to the network. Review the steps in this document to check communication between the product and the computer.
The 169.254.xxx.xxx is use for APIPA  Automatic Private IP Addressing and is self assing if you have one of this you will need to disable IPv4 and enable it to see if there only a glick is that does not fix the problem if may be corruction on the stack of protocols you will have to uninstall and reinstall the protocols stack. Refer to the Operating system KB to see how you accomplish this.
Let's set the static IP first,
In the EWS screen, click the Network tab.
Click Wired (802.3) , and then click the IPv4 Configuration or the IPv6 Configuration tab.
Click Manual IP . The Manual IP Address box opens.
In the Manual IP Address box, type an IP address with the same values in the first three sets of digits (subnet values) as the product's IP address (listed on the Network Configuration Page), and a higher value (between 1 and 254) in the fourth set of digits. This creates a static IP address on the same subnet, but outside the Dynamic Host Configuration Protocol (DHCP) range.
For example, if the product's original IP address is 192.168.0.1 , assign the static IP address to 192.168.0.200 .
Figure 5: Example of an IP address - DHCP values shown
Figure 6: Example of a static IP address with DHCP values modified
NOTE:Do not type the static IP address from the example. Enter a static IP address based on the IP address for your product.
Enter the Subnet Mask and the Default Gateway settings as they appear on the Network Configuration Page.
Now here should be able to set the DNS server to the google's Public ones, Please. Do so
Click OK to save the new settings, and then click Exit or close the browser to exit the EWS.
Let me know if this helps and will continue making my best effort to assist you until we get this working properly
Hope this helps and regards;
RobertoR
And remember. . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

How to enable Web services for CP 1525nw

Hi,
I am unable to use ePrint for LaserJet CP 1525nw. Printer connected over WiFi. Tried to Enable Web services and saw the message "Connection error Check connection". Firmware is up-to-date. Use the printer in different applications on PC, iPad and iPhone. Everything is working well not ePrint. HP diagnostics did not describe any problems.

Hello Prophet097,
Setting manual network information may help the enabling of Web Services for ePrint on your printer.
To do so:
On the printer's control panel, press "OK" two times to access the reports menu.
Press the right arrow to select "Network Summary" and press "OK" to print the report.
Open an internet browser on a computer within the same network as the printer.
In the address bar, type the printer's "IPv4 Address" and press "Enter", this should take you to a page about your printer.
Click on the "Network" tab at the top of the page.
Click on "IPv4 Configuration" on the left-hand side.
Click the bubble to the left of "Manual" to allow you to input manual settings.
Input the same information from the "Network Summary" into the fields for "IP Address", "Subnet Mask", and "Default Gateway".
Note- None of those fields should be "0.0.0.0"0 or "169.254.xx.xx". If they are, there maybe network issues with the printer.
In the "Preferred DNS Server" and "Alternate DNS Server", this could vary by the size of your network.
-Preferred DNS Server- If you are on a small network, input the same value as the "Default Gateway".
-Alternate DNS Server- If you are on a small network, input either "0.0.0.0" or "8.8.8.8."
Note- If you are on a domain, you may have specific DNS Server information that needs to be in the fields.
Click "Apply" on the page.
Power the printer off and then on.
Try to enable Web Services again.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to enable E-Service..

Hi Experts,
We are using ISA Ecommerce 5.0 and ECC 6.0 as backend.
We want to enable E-service now. Is this possible to do using ECC 6.0 and please suggest steps to proceed further.
Thank you all...
Venkat

Hello,
As far as I know E-Service is only available in the SAP CRM release. this is a part of the SAP-CRMAPP component and this is not available with ECC.
Regards
Mark

How to restart AMP service in Solaris 10

Hi All,
I have installed AMP221.pkg in solaris 10 i86pc. its get installed in /local/apps/amp.
when i type http://localhost its not working.
now How can i start apache service.

Hello,
Make sure that the apache configuration file /etc/apache/httpd.conf exists and has a valid configuration.
Regards,
Rei

How to enable web services for the HP envy 4500

I am settin up my new HP ENVY 4500, have the printer working to my wireless rounter but am unable to connect to web services so I can update the printer. How do I do this?

Hi,
Have you activated it yet ? Looks like the setup is not right or missing, it's not connected to the internet. Please use the following tool to run the setup:
http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to enable ping service on java-stack only system

I have installed SAP NetWeaver 7.0 - Java Trial on local host.
How can you activate the ping service there?
It should work under "http://localhost:50000/sap/bc/ping"
(I know how to activate it with transaction SICF in an abap system, but I have java-stack only here, so I can't call transactions. I can only use the Visual Admin, right?, but there I could not detect a ping service so far)
More detailed:
I created system "SAP_WebDynpro_XSS". (this is necessary for connecting to ECC abap backend for ESS Packages) and set following parameter:
template:"SAP system using connection string"
     category: Web Application Server
          Web AS host name: chrisSAP:50000
          Web AS path: /webdynpro/dispatcher/
          Web AS protocol: http
But when I test the "SAP Web AS Connection" for this system, I got following error:
7. The Web AS ping service http://chrisSAP:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
8. An HTTP/S connection to http://chrisSAP:50000/webdynpro/dispatcher/ was not
obtained successfully; this might be due to a closed port on the Firewall.
I guess step 8 did not pass because step 7 failed, and not because of a closed port or firewall (I made sure everything is open.)
The strange thing is that the connection test fails, but the connection seems to work fine!
I mean I can see the front ESS page in the portal when logging in with an ESS-user, and there are no errors in the log. If I change the SAP_WebDynpro_XSS parameters to some other made-up values, then the front ESS page does not come up and some errors appear with "SAP_WebDynpro_XSS" inside.
That proofs that the connection is working despite the failed connection test, right?. But what can I do that the connection test passes? It seems that somehow SAP has hardcoded the path "/sap/bc/ping" which usually exists on an abap system. But I have java-stack only, so how can I tell that the function that runs the test?
A system connection test fails, but the connection is working fine!
If someone could explain that to me...

Dear Srini Nookala,
thank you for your answer. Unfortunately I don't understand the relation of my question to your answer.
>> check with OSS note 1019335 SAP NetWeaver AS Java 6.40 SP21
I have Version 7.0 SP14. I read the OSS note, but there are around 100 changes listed. I read them all, but couldn't figure out one that has to do with ping and system test. So which sentence inside the note are you referring to?
>> The problem is due to JCo parameters configuration not properly, Ask Basis team, they will do it.
I am basis team. I configured the JCo properly as described in manual and tested them afterwards. They run successful. Also all the links that you gave refer to JCO connections about how to set them up and test them. But what have JCO connections to do with System-connection tests? As far as I know JCO-connections are not used for system connectivity tests. You can set them up independent. I understand that JCO-connections are used for getting data from backend servers. But the system "SAP_WebDynpro_XSS" is defined for determing the webdynpros on localhost (frontend, not backend).
So please can you explain me what JCO-connections which refer to remote hosts have to do with a ping service on local host that cannot be reached? And which part would be not configured "properly"? Timeouts? user?
To define my question more properly:
Is it possible to make the connection test work on a java-stack only host for a system that refers to itself (localhost)? Or is it a known bug?
Some sub-questions
Am I using the right system template (I am using "SAP system using dedicated application server")
I have no abap on local host (chrisSAP). Only java stack. Usually path ..sap/bc/ping refers to an abap system, right? So in my opinion I have 3 possibilities:
- install abap-stack on local host (portal) and activate ping service.
- somehow install a ping service that runs under the given URL in Visual Admin (how?)
- somehow tell the connection test to skip pinging and continue test. (How?)
Any additional advice would be highly appreciated.

How to enable location service (iPod touch 4g)?

I enabled the location service in the settings, but it always says cannot determine location.
I even registered the MAC address to skyhook..
Please help..

Apple no longer uses skyhook
make sure you are conected to wifi
then, if the problem still persists
follow likeabird's instructions
Hi,
Try resetting your iPod: http://support.apple.com/kb/HT1430.
Hope this helps!
---likeabird---

How to enable proxy service in snow leopard

I want to enable the proxy service in snow leopards apache server.
Saw a note online and gave it a try.
I added a proxy.conf file in /private/etc/apache2/other, then turned on apache. Create the cache directory. It didn't work.
What did I miss?
The configuration file:
AddModule mod_proxy.c
<IfModule mod_proxy.c>
ProxyRequests On
<Directory proxy:*>
Order deny,allow
#Deny from all
Allow from all
#NOTE: Replace '.your_domain.com' with your IP number(s)!
</Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
CacheRoot "/Library/WebServer/ProxyCache"
CacheSize 5
CacheGcInterval 4
CacheMaxExpire 24
CacheLastModifiedFactor 0.1
CacheDefaultExpire 1
NoCache a_domain.com another_domain.edu joes.garage_sale.com
</IfModule>
# End of proxy directives

Try the Unix forum under OS X Technologies.

How to enable FTP service in Solaris 10

Similar Messages

Maybe you are looking for