How to enable or disable buttons on an interactive ALV report

I have two buttons on Interactive ALV report. Before displaying the ALV report, I want to enable or disable buttons on ALV depending on some conditions.I dont want to make the buttons visible or invisible. This is not an OO ALV report.
Please suggest !!!

Then you have to use the event set_pf_status or parameter I_CALLBACK_PF_STATUS_SET for this pass the form name.
You have to Implement the form Routine.
FORM PF_STATUS using status type SLIS_T_EXTAB.
SET PF-STATUS 'STS' excluding status.
ENDFORM.
First create the pf-staus using SE41 or double click on the status name and create . By default you make them Disable mode.

Similar Messages

ALV . How to remove the sort buttons on toolbar in ALV report?

Hi,experts
As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
Thanks for your help .

Hi guixin,
1. Before calling REUSE_ALV_LIST_DISPLAY
2. Write this code :
data : excl type SLIS_T_EXTAB.
data : exclwa type SLIS_EXTAB.
exclwa = '&OUP'.
append exclwa to excl.
exclwa = '&ODN'.
append exclwa to excl.
3. Then while calling the FM,
pass this parameter also .
IT_EXCLUDING = excl
It will work fantastic.
regards,
amit m.

How to add a push button(download) to my ALV Report to download report data

Hi,
I developed a normal alv report and now i want to add a push button ex.. download in the report output and then whwnever I am clicking this download button then download functionality will work.Please don't take it as simple from my point of view it is very imp. for me please help me.
Thanks.

Hi,
Please check the below thread
Re: ADD button to ALV Grid
Thanks
Arul

How to Enable the SAVE button in the Menu Bar of the Invoice Document.

Hi.
How to Enable the SAVE button in the Menu Bar of the Invoice Document as it is disabled for me.
I would like to save the Invoice document in PDF format.
Regards
Irfan

Hi,
Normally, for the archiving or generation of the invoice document in PDF format is handled by maintaining the output records through VV31/VV32 with the relevant printer, storage mode ( 3- print and archive or 2- archive only ), no. of messages ( means no of copies ) in the communication method.
Then when you click the print button through VF03 in the print options pop-up you get a print at the physical printer and at the same time an archived copy ( PDF copy ) attached with the document.
So, please make sure the output records are fine to allow a PDF copy generated and then try to print and check in VF03 by entering into the billing document.
Hope this helps you.
However, from the print preview you normally would not be allowed to save or print.
Regards,
Ram
Edited by: Ramakrishna Peri on Apr 3, 2009 9:16 AM

How to enable Previous Step Button in First Substep of FPM Road Map

Hello All,
I have created three MainSteps M1 M2 M3.
In Main Step M2 having Substeps Say S1 S2 S3 S4.
In M2 of S1 Previous Button by default it is disabled. Means user can't go back from First Substep(S1) to Main Step2 (M2).
Please let me know how to enable "Previous Step" Button in First Substep (S1) of FPM Road Map in M2.
Thanks in Advance.
Br
-CW

Hello BS,
Thanks for your suggestions.
Yes we can do with custom button.
Is there anyway to enable standard Previous Step Button in First Substep instead of creating cutom button.
Please guide me if any other options.
BR
-CW

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

How to enable my disabled I pad

How to enable my disabled iPad

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

How to get sum for each currency's in ALV Report

Hi,
A column has amounts with various currency's.
May I know how to get sum quantity for each currency in ALV Report?
Thanks in advance.

Hi,
Currency value column should have reference to currency code column.
Regards,
Wojciech

How to save data in ztable after editing in alv report

how to save data in ztable after editing in alv report?

Hi,
Please find the attachment below.This may be usefull to you.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ALV-Editingandsavingtheeditedvaluesin+Database%28OOPS%29]
Regards,
Ramakrishna Yella.

How to give no of lines per page in alv report

hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.

Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            it_events                = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*&      Form after_line_output
*       Form for the After Line Output Event in the internal table
*      --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno.          "Defaulted value for line count
    perform write_footer.
    NEW-PAGE.
ENDIF.
ENDFORM.                    " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil.

How to devolped an Interactive ALV Report to display sales orders

hi,
how to devolped an Interactive ALV Report to display sales orders pertaining to the selected Customers and item details in the secondary list.For this report what are the tables and fields wehave to used give with example.
thank you
radhakrishna

Hi,
look via se38 for BCALV* and SALV*.
Try ABAPDOCU.
Regards, Dieter

How we can drill-down, sorting, traffic lights, in ALV report

hi gurus ,
how we can drill-down, sorting, traffic lights, in ALV report .
please any one suggest that...
regards,
praveen

Check the sample code for drill-down, sorting, traffic lights, in ALV report.
REPORT YMS_COLOURALV NO STANDARD PAGE HEADING.
TYPE-POOLS: SLIS, ICON.
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: BEGIN OF IMARA OCCURS 0,
LIGHT(4) TYPE C,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
COLOR_LINE(4) TYPE C,
TCOLOR TYPE SLIS_T_SPECIALCOL_ALV, "cell
END OF IMARA.
DATA: XCOLOR TYPE SLIS_SPECIALCOL_ALV.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM WRITE_REPORT.
FORM GET_DATA.
WRITE ICON_GREEN_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'ABC'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for ABC'.
APPEND IMARA.
WRITE ICON_YELLOW_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'DEF'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for DEF'.
APPEND IMARA.
WRITE ICON_RED_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'GHI'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for GHI'.
APPEND IMARA.
LOOP AT IMARA.
IF SY-TABIX = 1.
IMARA-COLOR_LINE = 'C410'. " color line
ENDIF.
IF SY-TABIX = 2. " color CELL
CLEAR XCOLOR.
XCOLOR-FIELDNAME = 'MTART'.
XCOLOR-COLOR-COL = '3'.
XCOLOR-COLOR-INT = '1'. " Intensified on/off
XCOLOR-COLOR-INV = '0'.
APPEND XCOLOR TO IMARA-TCOLOR.
ENDIF.
MODIFY IMARA.
ENDLOOP.
ENDFORM. "get_data
FORM WRITE_REPORT.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV.
LAYOUT-COLTAB_FIELDNAME = 'TCOLOR'.
LAYOUT-INFO_FIELDNAME = 'COLOR_LINE'.
PERFORM BUILD_FIELD_CATALOG.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT
TABLES
T_OUTTAB = IMARA.
ENDFORM. "write_report
FORM BUILD_FIELD_CATALOG.
DATA: FC_TMP TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
CLEAR: FIELDCAT. REFRESH: FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Status'.
FC_TMP-FIELDNAME = 'LIGHT'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '4'.
FC_TMP-ICON = 'X'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Number'.
FC_TMP-FIELDNAME = 'MATNR'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '18'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Type'.
FC_TMP-FIELDNAME = 'MTART'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '10'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material'.
FC_TMP-FIELDNAME = 'MAKTX'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '40'.
APPEND FC_TMP TO FIELDCAT.
ENDFORM. "build_field_catalog

How can i call a condition type into my ALV report

I am developing one ALV report in that how can i call a condition type.I am one condition type PB00 for special price.This special price column should be present at the output list.This special price is not there any one of the database tables.So we will create one condition type for this.How can I develop one condition type and how we may call this condition type into my ALV report.

V/06 is the condition type transaction .You attach a Access sequence to that which is stored in V/07 .
there you can also get based on key combination tables names .
which you can used in your report to include in the ALV .
Contion type PB00 Access sequence PB00
which will have step say
Step Table combination
1 071 Material plant
2 142 SO/dc/DV
here Application would A and table would A table number .
for eg .A071 .

How can I call a condition type in my ALV report

I am having one condition type.Then how can I call a condition type in my ALV report.

Hi,
If you have any conditions then filter your data according to that conditions through SQl queries.
And then display it through ALV.
Regards
Mudit

How to enable a disabled radio button????

Hi here is the problem i have, i have a number of radio buttons contained in a buton group, all the buttons bar the first one are disabled. The buttons are all drawn on a JPanel. What i want to be able to do is once the enabled button has been selected, I want to enable the next button in the gropu and also then disable the one that was previously enabled. Is there any way i can do this, below is the code i have for setting the group up, and trying the above probelm. Any help much appreciated Thanks.
/* Function creates a radio button and adds it to the button group */
     public JRadioButton getRadioButton(String myString, boolean val)
          JRadioButton myButton=new JRadioButton(myString);
          myButton.setActionCommand(myString);
          myButton.addActionListener(myListener);
          myButton.setEnabled(val);
          group.add(myButton);
          return myButton;
//adds the radio buttons to the panel, for each transition */
     public void addTranPan()
               for(int i = 0; i < dCreate.char2.size(); i ++)
               if (i == 0) mPanel.add(getRadioButton(dCreate.char2.elementAt(0).toString(),true));
               else
mPanel.add(getRadioButton(dCreate.char2.elementAt(i).toString(),false));
public void ChangeButtonState()
Component [] components = getContentPane().getComponents();
          for (int i = 0; i < components.length; i++)
               Component c = components;
               if (c instanceof JRadioButton)
               JRadioButton rb = (JRadioButton) c;
               rb.setEnabled(false);
               if (c.getName().equals(ch)) //find button to enable
               JRadioButton rb = (JRadioButton) c;
               rb.setEnabled(true);
               break;
          mPanel.repaint();

import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class sol21 extends JFrame implements ItemListener {
JRadioButton
   radio1 = new JRadioButton("One"),
   radio2 = new JRadioButton("Two"),
   radio3 = new JRadioButton("Three"),
   radio4 = new JRadioButton("Four");
JRadioButton[] radios = {
    radio1, radio2, radio3, radio4
int INITIAL_ENABLED = 0;
public sol21() {
    ButtonGroup group = new ButtonGroup();
    JPanel panel = new JPanel(new GridBagLayout());
    GridBagConstraints gbc = new GridBagConstraints();
    gbc.insets = new Insets(5,0,5,0);
    gbc.anchor = gbc.WEST;
    gbc.gridwidth = gbc.REMAINDER;
    for(int j = 0; j < radios.length; j++) {
      radios[j].addItemListener(this);
      group.add(radios[j]);
      panel.add(radios[j], gbc);
      if(j == INITIAL_ENABLED)
        continue;
      radios[j].setEnabled(false);
    setContentPane(panel);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    setSize(300,200);
    setLocation(300,200);
    setVisible(true);
public void itemStateChanged(ItemEvent e) {
    JRadioButton button = (JRadioButton)e.getItemSelectable();
    if(e.getStateChange() == ItemEvent.SELECTED) {
      int index = 0;
      for(int j = 0; j < radios.length; j++)
        if(radios[j] == button)
          index = j;
      radios[(index + 1) % radios.length].setEnabled(true);
      if(index == 0)
        index = radios.length;
      radios[(index - 1) % radios.length].setEnabled(false);
public static void main(String[] args) {
    new sol21();
}

How to enable or disable buttons on an interactive ALV report

Similar Messages

Maybe you are looking for