How to Enable Remote services using the GPO for the Client Machines

How to enable remote Access services on Client machines using the Group Policy. After enable how to access with out switching the users remote as administrator

Hi,
If you use windows server 2003, we can refer to the following link to enable remote access services on Client machines using the Group Policy:
Enable or disable Remote Desktop
http://technet.microsoft.com/en-us/library/cc727977(v=WS.10).aspx
If you use windows server 2008 and later version, we can refer to the following link to enable remote access services on Client machines using the Group Policy:
How to Enable or Disable Remote Desktop via Group Policy Windows 2008
http://social.technet.microsoft.com/wiki/contents/articles/4980.how-to-enable-or-disable-remote-desktop-via-group-policy-windows-2008.aspx
After you enable
Allow users to connect remotely using Remote Desktop Services policy setting, users who are members of the Remote Desktop Users group on the target computer can connect remotely to the target computer by using Remote Desktop Services.
So if you want users to access computer remotely, you need add users as members of the Remote Desktop Users group on the target computer.
About how to add users to the Remote Desktop Users group, please refer to the following link:
Configure the Remote Desktop Users Group
http://technet.microsoft.com/en-us/library/cc743161.aspx
Best Regards,
Erin

Similar Messages

Can any one show me how to call web service using soap lite mod perl client

Hi, Experts
SAP is new for me and now I need to develop a perl client using soap lite, I have read "HOWTO: SCRIPTING LANGUAGE SUPPORT FOR SAP SERVICES - PERL" but not quit understand that. Can some one show me a real perl client example?
I enclosed the wsdl file generated from SAP web service.
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions targetNamespace="urn:sap-com:document:sap:rfc:functions" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="urn:sap-com:document:sap:rfc:functions" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
- <wsdl:types>
- <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:tns="urn:sap-com:document:sap:rfc:functions" targetNamespace="urn:sap-com:document:sap:rfc:functions" elementFormDefault="unqualified" attributeFormDefault="qualified">
- <xsd:element name="Z_RFC_WEBSERVICE">
- <xsd:complexType>
<xsd:sequence />
</xsd:complexType>
</xsd:element>
- <xsd:element name="Z_RFC_WEBSERVICEResponse">
- <xsd:complexType>
- <xsd:sequence>
<xsd:element name="EV_STRING" type="xsd:string" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
</wsdl:types>
- <wsdl:message name="Z_RFC_WEBSERVICE">
<wsdl:part name="parameters" element="tns:Z_RFC_WEBSERVICE" />
</wsdl:message>
- <wsdl:message name="Z_RFC_WEBSERVICEResponse">
<wsdl:part name="parameters" element="tns:Z_RFC_WEBSERVICEResponse" />
</wsdl:message>
- <wsdl:portType name="Z_RFC_WEBSERVICE">
- <wsdl:operation name="Z_RFC_WEBSERVICE">
<wsdl:input message="tns:Z_RFC_WEBSERVICE" />
<wsdl:output message="tns:Z_RFC_WEBSERVICEResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="Z_RFC_WEBSERVICESoapBinding" type="tns:Z_RFC_WEBSERVICE">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="Z_RFC_WEBSERVICE">
<soap:operation soapAction="" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="Z_RFC_WEBSERVICEService">
- <wsdl:port name="Z_RFC_WEBSERVICESoapBinding" binding="tns:Z_RFC_WEBSERVICESoapBinding">
<soap:address location="http://darkwind:9080/sap/bc/srt/rfc/sap/Z_RFC_WEBSERVICE?sap-client=800" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Thanks for your help!

now I know how to call from perl tool,
#!/usr/bin/perl -wd
use SOAP::Lite;
    use SOAP::Lite +trace;
   my $client = SOAP::Lite->new();
   $client->uri('urn:Z_RFC_WEBSERVICE');
   $client->on_action(sub {return'""'});
   $client->proxy('http://darkwind:9080/sap/bc/srt/rfc/sap/Z_RFC_WEBSERVICE?sap-client=800');
   my $som = $client->Z_RFC_WEBSERVICE();
   my $output = $som->result;
   print $output "\n";
but I got "Operation not supported" error when executing
my $som = $client->Z_RFC_WEBSERVICE();
here is trace:
SOAP::Transport::new: ()
SOAP::Serializer::new: ()
SOAP::Deserializer::new: ()
SOAP::Parser::new: ()
SOAP::Lite::new: ()
SOAP::Transport::HTTP::Client::new: ()
SOAP::Lite::call: ()
SOAP::Serializer::envelope: ()
SOAP::Serializer::envelope: Z_RFC_WEBSERVICE testtypesZ_RFC_WEBSERVICE
SOAP::Data::new: ()
SOAP::Data::new: ()
SOAP::Data::new: ()
SOAP::Data::new: ()
SOAP::Data::new: ()
SOAP::Transport::HTTP::Client::send_receive: HTTP::Request=HASH(0x93f14a4)
SOAP::Transport::HTTP::Client::send_receive: POST http://darkwind:9080/sap/bc/srt/rfc/sap/Z_RFC_WEBSERVICE?sap-client=800 HTTP/1.1
Accept: text/xml
Accept: multipart/*
Content-Length: 552
Content-Type: text/xml; charset=utf-8
SOAPAction: ""
<?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/1999/XMLSchema" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"><SOAP-ENV:Body><namesp1:Z_RFC_WEBSERVICE xmlns:namesp1="urn:Z_RFC_WEBSERVICE"><c-gensym3 xsi:type="xsd:string">testtypesZ_RFC_WEBSERVICE</c-gensym3></namesp1:Z_RFC_WEBSERVICE></SOAP-ENV:Body></SOAP-ENV:Envelope>
SOAP::Transport::HTTP::Client::send_receive: HTTP::Response=HASH(0x93eb288)
SOAP::Transport::HTTP::Client::send_receive: HTTP/1.1 500 Internal Server Error
Server: SAP Web Application Server (1.0;700)
Content-Length: 264
Content-Type: text/xml; charset=utf-8
Client-Date: Sat, 14 Feb 2009 19:33:50 GMT
Client-Peer: 146.225.80.176:9080
Client-Response-Num: 1
Sap-Srt-Id: 20090214/113349/v1.00_final_6.40/49958133C5E634E8E100000092E150B0
Set-Cookie: sap-usercontext=sap-client=800; path=/
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Client</faultcode><faultstring xml:lang="en">Operation not supported</faultstring></soap-env:Fault></soap-env:Body></soap-env:Envelope>
SOAP::Deserializer::deserialize: ()
SOAP::Parser::decode: ()
SOAP::SOM::new: ()
Can't use an undefined value as a symbol reference at ./sapClient.pl line 10.
SOAP::Lite::DESTROY: ()
SOAP::Deserializer::DESTROY: ()
SOAP::Parser::DESTROY: ()
SOAP::Transport::DESTROY: ()
SOAP::Transport::HTTP::Client::DESTROY: ()
SOAP::Serializer::DESTROY: ()
SOAP::Data::DESTROY: ()
SOAP::Data::DESTROY: ()
SOAP::Data::DESTROY: ()
SOAP::Data::DESTROY: ()
SOAP::Data::DESTROY: ()
SOAP::SOM::DESTROY: ()
Ran SAP Web Service Navigator Test 'Z_RFC_WEBSERVICE' OK
Can someone help?
Thanks!

How to enable COLOR EFFECT, DISPLAY, etc. panels for the custom components?

POSITION AND SIZE and COMPONENT PARMETERS are the only panels available for the custom components. Is there a way to configure the custom components or the Flash Pro itself to enable other panels (COLOR EFFECT, DISPLAY, etc.) that available for the Adobe UI components?

In Flash CS6, you'll need to place your component(compiled clips) inside a Movieclip symbol to apply these settings. In Flash CC, you may do so directly from the Properties panel like for any other movieclip symbol.
Let me know if you face issues.
-Nipun

How replace FP Advise.vi using FP read for the example "Frequency Measurement.vi"?

I have a Labview 8.5 system and a hardware FP-CTR-500, and I tried to modify the NI example (Find example ----> Frequency Measurement.vi) to measure the signal frequency.
But the example FP Write.vi and FP Advise.vi have some problems.
Could you please show me how to correct it?
Thanks!
JL
Attachments:
Frequency Measurement.vi ‏47 KB

Hi JeffLi,
Could you please be more specific about the error you're seeing?
Thanks,
Bobby Breyer
Applications Engineer
National Instruments

How to enable remote debugging for a session other than the current one

Hi all,
I am trying to figure out how to enable remote debugging for a session other than the one I am currently using.
More specifically, we have an application that is making database calls to Oracle 11gR2. Something is causing an exception during this invocation. My system is currently not set up to recompile said application, so I can't just add the debug call to the code and recompile. Therefore I would like to be able to log into the database (as sys, if necessary) and invoke dbms_debug_jdwp.connect_tcp on the desired session.
The docs indicate that I should be able to do so:
dbms_debug_jdwp.connect_tcp(
host IN VARCHAR2,
port IN VARCHAR2,
session_id IN PLS_INTEGER := NULL,
session_serial IN PLS_INTEGER := NULL,
debug_role IN VARCHAR2 := NULL,
debug_role_pwd IN VARCHAR2 := NULL,
option_flags IN PLS_INTEGER := 0,
extensions_cmd_set IN PLS_INTEGER := 128);
But when I try (even as sys), I get the following:
exec dbms_debug_jdwp.connect_tcp('1.2.3.4',5678,<session id>,<session serial>);ORA-00022: invalid session ID; access denied
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
00022. 00000 - "invalid session ID; access denied"
*Cause: Either the session specified does not exist or the caller
does not have the privilege to access it.
*Action: Specify a valid session ID that you have privilege to access,
that is either you own it or you have the CHANGE_USER privilege.
I've tried granting the 'BECOME USER' privilege for the relevant users, but that didn't help. I read something about having to set some kind of ACL as of 11gR1, but the reference documentation was very confusing.
Would someone be able to point me in the right direction? Is this even possible, or did I misread the documentation?

Interesting deduction, that would be very useful indeed. I hate recompiling just to add the debug call, and it can't be done in our production environment. But it seems unlikely to me it would be implemented this way.
I would cross-post this in the SQL AND PL/SQL forum though, as this is really a database issue, not with the SQL Developer tool. Do add the links to the other posts in each.
Regards,
K.

How to enable remote connections in SQL Server 2008

I'm trying to enable remote connections in SQL Server 2008 R2 as described in the following article. I see the error message at the top of the article.
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx
One step in the article describes how to enable TCP/IP in Configuration Manager.  Specifically it says that
'SQL Server NETWORK Configuration' should have TCP/IP enabled.
The issue I've encountered is that my Configuration Manager
is different than what appears in the article. My Configuration Manager shows the following:
SQL Server 2005 Services
SQL Server 2005 Network Configuration (32 bit)
      - Protocols for SQLExpress
SQL Native Client Configuration (32 bit)
       - Client protocols
       - Aliases
Note that I see 'SQL Server 2005 Network Configuration'
rather than that for 2008. When 'Protocols for SQLExpress'
is expanded, there is a TCP/IP setting, but it's disabled and I see an
Access Denied message if I try to enable this.
I also see a TCP/IP setting under Client protocols and successfully enabled this. This uses port 1433 and I configured my firewall to accomodate this port as suggested in the article.
I also followed the other steps in the article, but still don't have remote access to SQL Server 2008 R2. (I can access it from the office.) I'm wondering if this remote access issue is because SQL Server
2008 Network Configuration does not appear in Configuration Manager
and if so, I'm interested in how this might be resolved. (I'm running Windows 7 - 64 bit.)
I'd appreciate any ideas on this. Thanks.

Hello,
Please refer to the following resource.
http://support.microsoft.com/kb/KbView/914277
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to enable bonjour, services indicate it is on automatic

how to enable bonjour
services indicate it is on automatic

Bonjour is Apple's implimentation of Zero Configuration networking and is the services discovery networking technology used by all Apple hardware and software. It is turned on and used automatically when the various sharing services are activated on your Apple computers and connected devices.
What is the problem you are having?

How to enable frontend printing using Adobe Print Forms

Otto Gold at the forum "SAP Interactive Forms by Adobe" gave me the tip that Sandra Rossi in this forum might help me out. Here is the link to my original thread How to enable frontend printing using Adobe Print Forms
My question was:
Hi Experts!
Did anyone of you manage to enable frontend printing using Adobe Print Forms? In order to save administration effort we use frontend printing in our ERP system. We just changed some SMARTFORMS to the new Adobe Forms technology. Now we learned that direct frontend printing does not work with these forms.
Any help will be very much appreciated.
Kind Regards,
Gerald

I think you'll be disappointed by a rather negative answer but I'll try to explain everything I know (or think I know) the best I can
The simplest solution is to do a preview, and print from Adobe Reader! (as I could see on one project, users have to display one more dialog than usually to print) It's the best workaround according to me.
How Adobe form printing works:
When you print an Adobe form from SAP, a printer language (PCL, PS, ZPL, PDF) is retrieved from TSP0B table according to the device type, ADS (Adobe Document Services, installed in the SAP java stack) is then contacted to generate the form: a file corresponding to the printer language is generated and sent back to SAP (there are also 2 other little files but it's of none interest here). SAP stores it as a file (named SPOOL...) in the global directory (DIR_GLOBAL when you use AL11 transaction).
When you ask SAP to print it, it sends the file as is to the printer.
Note: when you ask SAP to display the spool, SAP sends a request to ADS which will send back a PDF (binary stream which is not stored on disk, just displayed on frontend).
How frontend printing works:
If you want to print a normal spool via frontend, SAP doesn't know the language of the printer you will choose. SAP sends the spool in a format named SAPWIN to a frontend program named SAPLPD, it converts the SAPWIN format into GDI, a Windows format that is understood by all printer drivers, and it is sent to the printer driver (you have selected) which converts the GDI format into the printer language.
Any workaround?
First possibility would be that ADS converts the PDF into SAPWIN format (by creating an Adobe .XDC file at the ADS side). SAP says it's not possible in Note 685571 - Printing PDF-based forms. As I understand, SAPWIN is a very simple language compared to PCL for example, so it is very difficult to convert a PDF to SAPWIN without losing much information. There's a SAP note about the SAPWIN language if you want to check.
Second possibility is to print directly the PDF through Adobe Reader: you get the PDF from ADS, download it to the frontend (easy), and execute directly Adobe Reader print function. Unfortunately, I don't know if it's possible. Moreover, we should enhance the standard SAP print dialog...
Third possibility is the one I recommended at the beginning of this post

HT204053 i lost my iPhone recently and how can i retrieve it using my Apple ID? also, how to turn icloud on using Itunes even if the phone's lost?

i lost my iPhone recently and how can i retrieve it using my Apple ID? also, how to turn icloud on using Itunes even if the phone's lost?

Unless you had enabled Find My iPhone on it before it was lost then there isn't any way to locate it (it can only be turned on directly on the phone, it can't be done remotely). If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPhone disabled on it.
If you think that it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

How do I use the VIs for the Fluke Hydra Series 2620a multimeter?

This message refers to the VIs found at this link:
http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.

Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?

I have a 4 gen Time Caps. and a 2nd Gen Airport Extreme I would like to extend my TC network to use the Extreme for the purpose of having internet available to my TV box wired. Is this possible and how to I get them to work together?
How can I get my Time Cap (TC 4 gen) to recognise my 2gen Airport Extreem (AE)
Frank

Thanks for the info, this really helps.
Power up the AirPort Extreme for a few minutes, then hold in the reset button on the back of the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart to a slow, blinking amber light.
It might be possible to use wireless to configure the Extreme, but I recommend using a wired connection. Temporarily, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The illustration below shows an AirPort Express. You will see AirPort Extreme on your screen.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Extreme and click Next
Wait a minute while AirPort Setup configures things for you. When you see the message of Setup Complete, click Done.
You can disconnect the Ethernet cable that you used for the set up now. Things should be working. The Extreme is providing additional wireless coverage the the Ethernet ports are enabled. You can connect to any port that you want since they all operate the same in this type of setup.

How to create a service entry sheet based from the PO

how to create a service entry sheet based from the PO
Gurus,
I am creating a service entry sheet from the PO but I am getting an error of u201CPlease maintain services or limits Message no. SE029- Diagnosis(You cannot enter data until the PO item has been maintained correctly) u201C
The document type of the PO is standard NB, account assignment category is Q- (Proj make to order) and the item category is D(service). Then I am trying also create a PR using account assignment category is Q- (Proj make to order) and the item category is D(service) but still cannot proceed, a message asking me to enter a service entry number. What I know the process is create a PO(maybe based from PR) then post the GR then create a service entry sheet in ML81N but I cannot proceed. Just creating a PR or PO using those mentioned account assignment and item category and getting an error of need to enter a service entry sheet number.
Please help.thanks!

HI,
Process for Creating Service Entry Sheet
Transaction Code : ML81N
1)To open the respective Purchase Order, Click on the u2018Other Purchase Orderu2019, then enter the Purchase Order No.
2)Click on the u2018Create Entry Sheetu2019 icon(3rd Icon on Top-Left)
3)Give Short Text (e.g. R/A Bill No. 1) and top service entry sheet number also generated.
4)Click u2018Service Selectionu2019 Icon on the Bottom of the Screen.
5)For the 1st Time, when we are making Service Entry Sheet for a respective Purchase Order, we need to u201CAdopt Full Quantityu201D by clicking the Check box next to it, then Enter. (*For the next time, no adoption is required, just continue)
6)Select the respective Services by clicking on the Left Hand Side, then Click u2018Servicesu2019 (Adopt services) icon on the Top.
7)Give the completed Quantity, then Click u2018Acceptu2019 icon(a green flag on the top)
8)Save .
9)Service Entry Sheet is SAVED and account posting made.
Hope, it is useful for you,
Regards,
K.Rajendran

HT1528 How to enable root user using terminal for mac lion 10.7.5 (step by step)

I been trying to find the terminal version of creating a root user since I don't know my admin password and want to delete that user.

You don't need to enable the root user. Just change the password for the account.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

How I enable network service of Oracle database 10g XE ?

Hi,
How I enable network service of Oracle database 10g XE ?
Following error occurs when printing:
ORA-20001: The printing engine could not be reached because either
the URL specified is incorrect or a proxy URL needs to be specified.

ORA-20001 is a user defined error. So you will have to find out where it comes from.
Regards
Marcus

So I've changed my hard drive for an ssd and now I've been told to enable trim now I've got the apple cover will they show me how to enable it with out some program of the internet ?

so I've changed my hard drive for an ssd and now I've been told to enable trim ? now I've got the apple cover will they show me how to enable it with out some program of the internet ?

Use an app called chameleon ssd optimizer.
I enabled trim with it after almost a year of having installed a Samsung 840 pro SSD and my read/write speeds almost quadrupled.
I would definite;y advise using it even though Samsung SSD's come with there own garbage disposal.
Hope that helps.

How to Enable Remote services using the GPO for the Client Machines

Similar Messages

Maybe you are looking for