How to enhance the new field(mblnr) into the cube.

Dear Experts,
My client wants GR document number and GR posting date in the drill down option in reporting, i have taken the field names of that. MBLNR and BUDAT, I only found BUDAT in the datasourse field level,please help me how to enchance MBLNR into the cube 0PUR_C01.
Thank You
Regards
Srikanth

SELF

Similar Messages

Powerpivot pivottable - I can't add or drag a "value field" from the pivottable field list into the "values" section.

I built a pivottable using Powerpivot.
Initially, I can add or drag any data field I want to columns, Rows or the Values area inside the field list (those 4 squares). However, as times goes by...suddenly... I just no longer can add or drag a "value field" from the pivottable field list into the
"values" section.
Does anybody know how to fix this problem ?

Hi Bin Long,
I tried what you suggested.
I believe that there is a glitch in the Powerpivot field list (where you find the 4 squares for columns, rows, values, filter)
When I initially create a pivottable with powerpivot, everything works fine when I am adding field list items to the the columns, rows, values sections, filters.
However.....IF I close the powerpivot field list or if I save and close the excel file...then I cannot add more items to the "values" section.
I can comment about one thing that seems different in my powerpivot field list. When I can no longer add items to the "values" section, I realized that in the TOP section of the field list I see in bold letters a summary of the items that are SUM ∑ in the "values"
section.
Does anybody know how to fix this ?
Thanks.

How to insert a new field without refreshing the data

Hi,
I have data of 3 years in a cube. I have to enhance a new field in that cube and i want the data will come from now onwards. I dont wanna have the data for the past 3 years.
Can anyone tell me how i can load the data of that field into the cube without refreshing the cube as cube has too much data.
Roma

Hi Roma,
It depend up on whether you are adding Cgharacteristic or Key figure. If you are adding key figure then no need to worry.
Just create the new keyfigure, add this in all your data flow and activate all the objects and assign proper transformation.
from next load you will get data for this field.
If you are addign data the this is a bit difficult than key figure. addign characteristic is nothing but you are making changes to your cube dimensions.
when you are changing your cube dimensions, you should delete the data before you transport the objects.
You can try once to transport the objects with out deleting data. If it fails then you have to delete the data from Cube.
Regards,
Venkatesh.

Loading Historical data to the new field without deleting the data in cube

Dear BI Experts,
I have enhanced a new field to the Generic data source in BI 7.0 .
I need to load historical data to the newly appended field.
As we are having very huge data it is not possible to delete and do init again.
Is there any other possibility to load the historical data for the new appeneded field without deleting the old requests?
Thanks for your Kind help.
Kind Regards,
Sunil

Dear Sushant,
Thanks for your reply.
But I am just wondeing if there is any possibility of loading historical data for new field using Remodelling concept
with out deleting old requests.
I do not know about Remodelling conept but heard that it is not recommeneded to use.
Can you please suggest and help.
Thanks and Regards,
Sunil Kotne

When will Adobe load the new Pantone colors into the Suite?

Pantone added hundreds of fabulous colors last year and these are not available to specify in any of the Adobe Suite programs!

You can get them from Pantone although they don't make it easy. Checkout this thread starting at #9
http://forums.adobe.com/message/5879842#5879842
With the free trial version of Pantone Manager you can install the new 336 colors and Goe.

How to put the new developed Requirement into an output type procedure...

Hi,
If we developed an new Requirement for an output type, how to put this new requirement number into the output type procedure???
for example: RV61B912
The requirement number is 912.
Thanks

any helps?
Thanks

How to add a new field in the cube and load data

Hi,
The requirement is
We have ZLOGISTICS cube , the data souce of this filed has REFDCONR-reference dcument number filed . We have to create a new field in cube load data and get this new filed into the report also.
Please any one can help me with the step by step process of how to do?
How to get the data into BW and into the report.

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

ABAP PROXY - how to load a new field into SAP SNC system

I am also curious about the proxy process. Please let me know if you know of a post that has mentioned this before.
We have to customize our Delivery Schedule Notification proxy. I already regenerated the standard one into a Z proxy name. I already put in my custom code to load Z fields into a Z table.
Here is my new problem. The users wants more additional fields.
Here is the standard proxy generated layout for this structure:
/SCA/BIF_S_DELIVERY_SCHEDULE
CONTROLLER
ID
TYPE_CODE
CREATION_DATE_TIME
BUYER_PARTY
VENDOR_PARTY
BILL_TO_PARTY
NOTE
ITEM
Here is the new proxy generated layout for this structure:
ZDELIVERY_SCHEDULE_NOTIFICATIO
CONTROLLER
ID
TYPE_CODE
CREATION_DATE_TIME
BUYER_PARTY
VENDOR_PARTY
SUPPLYING_VENDOR
BILL_TO_PARTY
NOTE
ITEM
Notice that SUPPLYING_VENDOR is the new field. VENDOR_PARTY is already loaded into the system. How can I get SUPPLYING_VENDOR loaded into the database?
Thank you in advance for your assistance.
Edited by: DAVID CRAIG on Jul 29, 2009 2:16 PM

Hello.
Thank you for the information. I need to clarify my situation.
I understand there is a PROVIDER CLASS. Within that PROVIDER CLASS there is a METHOD. Inside that METHOD there is a place for me to put my code in. I have already done that work for a previous requirement. I moved Z fields to a Z table.
My new requirement has a field SUPPYING_VENDOR that was inserted into one of the SAP structures. It was placed next to VENDOR_PARTY.
Here are my steps of execution:
1. Go to transaction /N/SCA/ICH_S (SNC Supplier View)
2. Click on RELEASE
3. Click on RELEASE OVERVIEW
4. Click on GO
5. Click on DETAILS
6. Click on the SHIP-FROM LOCATION tab
The SHIP-FROM LOCATION field is currently being populated by the VENDOR_PARTY field from the proxy. This is done automatically by SAP.
1. How do I find the table and field name for that field? This is in the Supply Network Collaboration screen, not normal SAP transaction.
2. How do I get that SUPPLYING_VENDOR data to populate SHIP-FROM LOCATION instead of VENDOR_PARTY?

Issue with the new COPA field added into the BBSEG Structure

Hello All,
I have an issue with the new COPA field added into the BBSEG Structure.
I think its added becuase of test Operationa Conern Created by somebody.
Can you please let me know how to remove that structure from BBSEG Structure.
Thanks
vsr

Hi Monohar & Ankur,
Thanks for your answers..
main issue is suddenly new field called RKE_COPA_KOSTL has been added to the BBESG Structure..
Because of this RFBIBL00 Upload is not working. I heard that this new fields will come by generating Operating Concerns by Transaction KEA0.I found an operating concern which was created as a test in developemt system..
But I am not sure how to delete that operating concern.Even i am not sure if we delete the Operating Concern ..is it going to delete that field in BBESG Structure or not??
Please advise me..
Thanks
sathi

How to insert the new field to standard scheduling agreement script form.

Hi Gurus,
how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
The below one is my requirement,
ex:-   Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of   document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified
      document date (field EKPO-AEDAT).
Thanks & Regards
chinnu

open TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
se71--->
&<str. name>-AEDAT&

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

How to insert the image or logo into the table as a field in webdynpro abap

Hi Friends,
Please tell me how to insert the image or logo into the table as a field in webdynpro abap.........

Hi Alagappan ,
In your view layout you take table UI element and then you bind it with some context nodes.
The attributes of your nodes comes as a field.
Now in these fields you can set various properties and image is one of them.
Go to ->
1. View Layout -> Right Click on ROOTUIELEMENTCONTAINER -> INSERT ELEMENT -> TABLE
2. Right click on table -> Create Binding.
Here you have to bind it with the appropriate context node.
You will get two properties here
a- Standard Cell Editor :- ( make it image )
b- Standard properties :- ( If required set image properties ).
3. If you want put image from out side then import it as a mime object and set the source of your table field ( used as a image )
also have a look :-
[Image Properties|http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm]
Hope this will solve your problem.
Reply if any case of any issue.
Thanks & Regards,
Monishankar C

How to add a new field in the Field Mapping

Dear Freinds,
               I have two un used fields in the Source fields to the Target Fields ,
i have to add the 3   fields which r there in the my source fields to that
of the target fields ( as per the change in the requirement) in the 5th Step
i.e Maintain Field Mapping and Conversion Rules
the Target strucutre & the Source fields( by clicking the button
Source field and selcting the fields from the popup menu) in the mapping and conversion step ,i want to add 3 fields which are availabe in the list of th source list which i want to map to the Target strucutre .
When i tried it is adding in the othe target field
presently i have mapping (5th sept ) as below.
   ZPA30_08                       LSMW
       Fields
           TABNAME                      Table Name
                               Source: ZP0008_STRC-PERNR (Personnel Number)
                               Rule :   Default Settings
                               Code:    ZPA30_08-TABNAME = 'ZPA30_08'.
           TCODE                        Transaction Code
                               Rule :   Default Settings
                               Code:    ZPA30_08-TCODE = 'PA30'.
now i want to add 3 fields Pernr,wage type and Amount , but when iam trying it is
getting and saved in the TABNAME .
How can i map please let me know .
Regards
syamla

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

In iPhoto 11, I know how to create new libraries. I do not know how to split my existing large library into the new ones.

In iPhoto 11, I know how to create new libraries. I do not know how to split my large existing library into the new libraries?

You need to use the iPhoto Library Manager.
(66928)

I have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

i have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

Without knowing what you have tried please open System Preferences - Sharing - File Sharing and select File Sharing. If you still have trouble you can call AppleCare in the morning when they re-open. You have 90 days of telephone support if you haven't already bought AppleCare.

How to enhance the new field(mblnr) into the cube.

Similar Messages

Maybe you are looking for