How to establish connection with the outgoing email server?

Cannot set up Lightroom 5 email capability with Google Mail. Have confirmed proper smpt address, email and password and error message still comes up:
"eFailed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
How can I clear this up. Help, Adobe!

Have you checked your Gmail in-box? See if this helps:
https://forums.adobe.com/thread/1642613

Similar Messages

Failed to send email. failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly.

I get the message listed above when I try to email pics. It asked me to set up an email account. I chose gmail. It asked for a password. I'm assuming it was asking for my email password. And yes I may have typed it in wrong, but how do I "please make sure you have entered the email account and password correctly" ??? I can't find out how to get back to that point?

Have you checked your Gmail in-box? See if this helps:
https://forums.adobe.com/thread/1642613

I used to be able to email photos from my Lightroom software quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoi

I used to be able to email photos from my Lightroom software 5.7 for MAC quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
I have been trying to get help from Adobe for 3 days. I have sent a message through "Get Support", 2 days ago, but no one has contacted me. I have tried by phone, but no one will help me. When I purchased Lightroom in May, 2014, I was able to receive phone help. I am now told that I don't qualify because I am not a Creative Cloud customer. I have been assigned a case number 186291729.
PLEASE HELP ME FIX THIS PROBLEM

I, too, have this problem. I see no one is responding with a solution? Hello? Can someone please advise?
Oh, and, yes, I have manually verified repeatedly that the information I gave to Lightroom is correct, and I still get the same error message when I try to validate.

TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

Sometimes deleting the account and then re-creating it can solve this issue
Write down all the information in accounts before doing this
Highlight the account on the left and click the minus button
Then click the plus button to add the new account and follow the prompts

JDBC receiver error Cannot establish connection with the registered driver

Hi Expert,
I am constructing a proxy to JDBC scenario. And I am getting error saying "
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection with the registered driver. oracle.jdbc.driver.OracleDriver returns: The Network Adapter could not establish the connection. : SQLException: The Network Adapter could not establish the connection"
I can get into my Oracle database using TOAD with same IP address, user name and password. Could anybody tell me what should I do? Thanks a lot!
Charles

Hi,
Check with your network team, network conenction between PI and Data base not working , Network team have to open Data base system ports inorder connect PI System.
check with Basis team about network connectivty,like they are bale to ping Data base server ip or not.
please go through below thread,
SQLException: Io exception: The Network Adapter could not establish the con
regards,
ganesh.

How can I connect with the AspNetUsers table in MVC 5?

I have a model, in which I have used several foreign keys from other tables. The point is that I also need to get the Id of the user, from the AspNetUsers table, though, I don't know how. I have done something like this, but it doesn't seem to be working:
public class Message
public int MessageID { get; set; }
[Required(ErrorMessage="Please type a message to submit")]
[DataType(DataType.MultilineText)]
[Display(Name="Message")]
public string MessageText { get; set; }
public DateTime WrittenOn { get; set; }
[Required(ErrorMessage="Please select a ticket")]
[ForeignKey("Ticket")]
[Display(Name="Ticket")]
public int TicketID { get; set; }
public virtual Ticket Ticket { get; set; }
[Required(ErrorMessage = "Please select a business")]
[ForeignKey("Business")]
[Display(Name = "Business")]
public int BusinessID { get; set; }
public virtual Business Business { get; set; }
[Required(ErrorMessage = "Please select a user")]
[ForeignKey("aspnetusers")]
[Display(Name = "User")]
public int Id { get; set; }
public virtual ApplicationUser ApplicationUser { get; set; }
When I try to create a controller using the Entity Framework with my model, I get an error message saying:
The ForeignKeyAttribute on property 'Id' on type ... is not valid. The navigation property 'aspnetusers' was not found on the dependent type ... The Name value should be a valid navigation property name.
If someone could help me solve the problem, I would be glad.

Hi Toni,
I see that this particular query is been answered in the following thread.
http://stackoverflow.com/questions/25372436/how-can-i-connect-with-the-aspnetusers-table-in-mvc-5
You can also refer the following links, hope this helps.
http://stackoverflow.com/questions/20071282/aspnet-identity-and-mvc5
http://blogs.msdn.com/b/webdev/archive/2013/10/16/customizing-profile-information-in-asp-net-identity-in-vs-2013-templates.aspx
Regards,
Bharath

Problems sending mail: some problem with the outgoing mail server SMTP?

I can't send e mails: some problem with the outgoing mail server SMTP?

I had this same problem with both my imac and mac book pro using hotmail via mac mail with bt as my internet provider. Suddenly 4 months ago out of nowhere i could receive emails but could not send them. I scoured all the threads followed all the fixes none of them worked. However I just phoned apple support and fixed it in a matter of minutes. I am SO happy. This is what the technician advised me:
Go to your apple icon and scroll down to system preferences. Then dependant on what machine you have it is different for my imac and mac book pro click on either air port/wifi then the advanced tab in the bottom right hand corner. Then click on the DNS tab. Hit the + sign on the left hand side and type in 8.8.8.8 then hit the + sign again on the left hand side it will create a new line underneathe and type 8.8.4.4 then hit okay on the bottom right and then hit apply, again on the bottom right. Then send a test email to check but it should be fixed.
Had to share this. Its been driving me mad for months.

VPN Issue: Could not Negotiate a connection with the remote PPP server

Hello Folks,
I setup VPN on Windows Server 2003 Enterprise R2. I am successfully able to connect to VPN via laptop internally and externally. However, on my iPhone I am not able to connect and receiving the following error "Could not Negotiate a connection with the remote PPP server".
There doesnt seem to be a lot of documentation regarding this on Apple and or throughout the web.
Anyone resolve this issue?
Peace
Phil C.

I am not entirely sure my full setup. I had a friend help me set it up. Now for some reason when on WIFI on my own network I am able to connect to VPN ( I wasnt able to before), but when I switch to edge there is still no response for the PPP server. I even messed around with the PPP options still no response. Unfortunately I am not extremely server literate so my troubleshooting is limited. However it is now working via my own WIFI and will try it on another WIFI network tomorrow. I am wondering though if it connecting had to do with any updates from microsoft. Since this is a newly installed server 2003 it has been running updates. Some food for thought.
Peace
Phil

When I set up my email address on my new IPad, I keyed it in worng. How do I correct with the right email address

When I keyed in my email address on my new IPad, I keyed it in wrong. How can I correct it with the right email address?

Start from scratch again with the correct Apple ID (email address)
Settings>General>Reset>Erase all content and settings

Why does itune keep telling me it could not establish a connection with the software update server

i have an iphone 3g running on 3.1.3 firmware and every time i plug into my pc running windows 7 it says that it is contacting the software update sever then after about ten seconds it says that update failed could not establish a connection with the server i have tried to disable my firewalls completely and it seems that nothing works nothing is wrong with the iphone it sync's properly and works fine someone plz help me so i can update

Everybody is tryng to connect to apple,s servers. Try tomorrow, it will be quieter

How to establish connection with oracle........

Hi,
I'm using ODBC driver and
I've given
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection cn=DriverManager.getConnection("jdbc:odbc:mydatabase","scott","tiger");
where mydatabase is the datasource name,scott is the user name,tiger is the password.
while running I got the error as:
java.sql.SQLException:[Oracle][ODBC][Ora]ORA-12560:TNS:protocol adaptor error.
I don't know how to solve this one.
Should I give the "ServiceName" while creating my datasource name............?????
Can anyone help me...........
Thanks in Advance.
Subha.

There are a couple of things that you might need to take into account while using the ODBC. Firstly, you need to set up an ODBC connection to the database. Secondly, you need to have the tnsnames.ora to point to the database the connection info.

My MacBook pro has stopped connecting to the outgoing mail server smpt (Tiscali) server, still receives mail fine, and connects to the web. Any suggestions welcome.

My MacbookPro has always worked fine, receiving and sending emails through my server,Tiscali. I took it to France for a few days, and was able to receive emails and use the web (through the wireless router and server in our accomodation), although as usual when away from home, I couldn't send emails. I tried to set up a new outgoing email route using O2 (as suggested by a web article), but it didn't work, so I deleted it, and used Tiscali webmail to send emails.
When I returned home, I selected my usual outgoing server (Tiscali), but found to my great surprise, that I could no longer send emails - Mail timed out, 'unable to connect'. I noticed when clicking on: Mail - Preferences, that in the outgoing mail smpt box, Tiscali appeared, as usual, but now was followed by (Offline)
Receiving emails and web connections have remained fine.
I've checked with Tiscali, and they can't find any problem with their server or my settings. Grateful for any suggestions about possible causes for this problem, and how to fix it.
Joe

I have just tried attaching the ethernet cable to the MacBook to see what happens. The system is fine, but when starting Mail, it never opens and locks up. You eventually just have to force quit out of the program.

DNS: Client can't connect because .local domain isn't in DNS. How can I connect over the WAN to server.domain.local?

So my 2012 server is set up on the LAN with a .local domain name.
Remote Desktop Services are set up and remoteapp stuff works fine on the LAN.
I've set up port forwarding so I can connect to the server over the WAN too, but remoteapp stuff is a bit different. I can connect to the server by specifying the correct IP address. Giving a Web browser the address
https://serverIPAddress/RDWeb
lets me get the login screen and see the range of apps for me to run. I select one, the connectoid is downloaded correctly (in Chrome) and I click on the downloaded connectoid.
Unfortunately, rather than pursuing the sensible IP-address approach that I started with, the connectoid has been given the server's name on the LAN: server.domain.local. Clearly, the client machine tries to look this up but DNS hasn't heard of
it because it's a .local address.
I cannot be the only one to have come across this apparent oversight on Microsoft's part. Any ideas as to how this can sensibly be overcome? Obviously, I could put the IP address translation into every client's hosts file (and I've done this and shown it
works) but I've got too many clients to mess about like this. Anybody know 'the Microsoft way' to fix this?
Thank you for checking this out -- I am confident the details of the problem are completely specified in this query but, if I'm wrong, please ask.
Many thanks again,
Biffo

Hi,
I would like to suggest you to follow the checklist.
Checklist: Make RemoteApp Programs Available from the Internet
http://technet.microsoft.com/en-us/library/cc772415.aspx
Thanks.
Jeremy Wu
TechNet Community Support

How do I enter a new outgoing email server

I am changing from ntlworld to btinternet and I need to specify the btinternet SMTP server. Under Tools/Account Options there is a box for SMTP server but it only allows me to put in Default or the ntlworld server. Both have the same effect - an inability to send an email without using ntlworld. How do I enter btinternet's server name?

The Return button to the right of the spacebar.

Why can't i connect with the apple update server while I am updating my phone?

I was updating my phone while errors came up and finally I got rid of those errors. Now there is this message saying "the iphone cannot be restored at this time,because the iphone software update server could not be contacted or is temporarily unavailable, please try again later ". what should I do?

See the answer in your other post.

How to establish connection with the outgoing email server?

Similar Messages

Maybe you are looking for