How to execute the job from script ??

How to execute the job from script ?? i have 2 jobs A AND B . I want to execute job B from job A'S Script ?? how can i ??

Hi Kishore,
Please refer the below link for BODS Job execution using Script
Executing a job by another job in BODS 4.1 using simple script
http://scn.sap.com/community/data-services/blog/2013/12/04/executing-a-job-by-another-job-in-bods-41-using-simple-script
Steps for executing BODS job from Unix Script with user defined global parameters
http://scn.sap.com/community/data-services/blog/2013/09/02/steps-for-executing-bods-job-from-unix-script-with-user-defined-global-parameters
Executing a job using batch file
http://scn.sap.com/thread/3503338
How to add a schedule for job2 with a condition after job 1 is finished
http://scn.sap.com/message/14523514#14523514
Scheduling BODS Jobs Sequentially and Conditionally
http://scn.sap.com/docs/DOC-34648
Thanks,
Daya

Similar Messages

How to execute the query from different blocks in Forms

Hi,
Curently I have a case where I need to execute the query from some other block. I used
l_curr_item VARCHAR2(62) := :SYSTEM.CURSOR_ITEM;
Go_Block ('BLOCK2');
Execute_Query;
Go_Item(l_curr_item);
This works fine , but as I am using Go_Block it does some other activities related to that block, which I dont want them to get executed.
So can any one please suggest me how I can call the query alone without using the Go_Block .
Thank you.

you can set global variable and filter for this variable in the triggers of blocks the actions then you avoid the code of trigger and you can use go_block

How to execute a Scenario from Windows CMD prompt

Please can you let me know how to execute the Scenario from a Windows CMD prompt? I am not sure if it is any different from "ODIStartScen" command that ODI uses to execute the scenario.
Appreciate your help.
Regards
B

Hi SH,
I tried running the scenario from the command line, but the process was not completed and it came back with the below message
Session : 131774001 finished with return code : 7000
Do I need to set up any environmental variables or any other setups before I can run the scenario from the command line?
Appreciate your help.
Regards
B

How to trigger a job from the another job?

Dear Pals,
Im new to Business objects data integrator 11.7.2.3.
Requirement :
I have two jobs JOB1 and JOB2. JOB2 to be executed only after completion of JOB1.Please do let me know how to meet this requirement.
Thanks in advance.
Regards,
Diras

export the execution command for both the jobs from the web admin batch job history page
this will export the job launch command to a .bat or .sh file depending on OS to %LINK_DIR%/log directory
you can call these jobs in another script in sequence
or if you are looking for lanuching Job2 only if Job1 is successful, then in the Job1 you can add a script at the end and call the script (to which the execution command is exported) for Job2 by using the exec function

How to get the job logs from sm35 by using the queue id and session name?

hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushik

Hi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin

How to synchronise the job processing from the program.

How to synbchronize the job processing when we are creating jobs from the program.
Thanks,
Ramana.

hi,
yes you can do this..
try this
create a two screen suppose 9000 and 9001..
then right click on your program name...
create a TCODE say TONE..
in this give the screen number 9000..
now again right click on the program name
create a TCODE say Tsecond
in this give the screen number 9001...
hope this will help you..
Regards
Ritesh J

How to find the job and job status from RSPCM

hi all,
suppose we got an error and in rspcm the process was failed.i want to know the status of that particular job.and if any i want to stop that job in SM37.
plz tell me how to find the job and job ststus from RSPCM...and how to stop that job in SM37
thanks,
jack

Hi Jack,
RSPCM: T.Code
This transaction is used to monitor the process chains
First:
here you need to add the process chains into the sheet
Second:
Then you can monitor the process chains in this transaction code
Like you can see the : status ,proces chain ,Last run date ,Last run time ,Log ID
Status : Green when sucessful,Yellow when running & Red when you get errors
Now when yoy click on any of the process chain in RSPCM you will go to the LOG VIEW as you see in RSPC transaction
SM37:T.code
This transaction is used for Job Overview
you can see many options in SM37
like Released,active,cancelled,finished,etc
Just select the ACTIVE jobs and also pass STAR in JOB ID & USER ID
here you can only see the active jobs
Goto Step in toolbar
select the program displayed
then chose option GOTO - Variant in main menu bar
in the variant you can see the job belong to which Process chain
if you want to cancel this job come back to SM37 Display screen
Select the Job and select the JOB DETAILS tab in Tool Bar
Collect the WIP ( Work Permit ID)
Go to SM50 T.code and find the WIP
in Main Menu Bar you find the option Cancel with Core choose this it will cancel the Job
Regards
Hari

When the PC System timing runs as per normal, reaches 0000hrs - a new date. How to Auto re-execute the VI from its first sequence order?

When the PC System timing runs as per normal, reaches 0000hrs - a new date. How to Auto re-execute the VI from its first sequence order?

Duplicate Post

How to recover weekly jobs from the past schedules

How to recover weekly jobs from the past schedules

Hi
You may also need to check the 'Scheduled' option to check for jobs which were schduled but were never released.
Regards
Sandeep

How to clean /Delete all the jobs from Job monitor.

Hi,
we have done lot of testing in redwood. we have scheduled many jobs through redwood.we want to clean up the Job monitor now.we want to delete all the jobs from job monitor.
1)Is there any standard system give Job definition to do so?
2) how to delete jobs in waiting status?(next run is going to lock wait due to this waiting job status)
3)how to delete all the Operator messages?
Regards
Rajesh

Hi,
Yes that was for individual job definitions but often if there are many jobs, most jobs come from only a few job definitions (SAP_AbapRun, SAP_CCMSJob, ...) so these options could help you already to delete most jobs.
You could also create a filter showing all Waiting jobs, then select all jobs, right-click and kill all these jobs.
Then a filter for all jobs in an end-state (Completed, Error, Killed, Canceled), select all jobs, right-click and delete them.
Regards,
Anton.

How to run the job using DBMS_SCHEDULER

How to run the job using DBMS_SCHEDULER
pleas give some sample Iam very new to DBMS_SCHEDULER

Hi
DBMS_SCHEDULER
In Oracle 10g the DBMS_JOB package is replaced by the DBMS_SCHEDULER package. The DBMS_JOB package is now depricated and in Oracle 10g it's only provided for backward compatibility. From Oracle 10g the DBMS_JOB package should not be used any more, because is could not exist in a future version of Oracle.
With DBMS_SCHEDULER Oracle procedures and functions can be executed. Also binary and shell-scripts can be scheduled.
Rights
If you have DBA rights you can do all the scheduling. For administering job scheduling you need the privileges belonging to the SCHEDULER_ADMIN role. To create and run jobs in your own schedule you need the 'CREATE JOB' privilege.
With DBMS_JOB you needed to set an initialization parameter to start a job coordinator background process. With Oracle 10g DBMS_SCHEDULER this is not needed any more.
If you want to user resource plans and/or consumer groups you need to set a system parameter:
ALTER SYSTEM SET RESOURCE_LIMIT = TRUE;
Baisc Parts: Job
A job instructs the scheduler to run a specific program at a specific time on a specific date.
Programs
A program contains the code (or reference to the code ) that needs to be run to accomplish a task. It also contains parameters that should be passed to the program at runtime. And it?s an independent object that can referenced by many jobs
Schedules
A schedule contains a start date, an optional end date, and repeat interval with these elements; an execution schedule can be calculated.
Windows
A window identifies a recurring block of time during which a specific resource plan should be enabled to govern resource allocation for the database.
Job groups
A job group is a logical method of classifying jobs with similar characteristics.
Window groups
A window groups is a logical method of grouping windows. They simplify the management of windows by allowing the members of the group to be manipulated as one object. Unlike job groups, window groups don?t set default characteristics for windows that belong to the group.
Using Job Scheduler
SQL> drop table emp;
SQL> Create table emp (eno int, esal int);
SQL > begin
dbms_scheduler.create_job (
job_name => 'test_abc',
job_type => 'PLSQL_BLOCK',
job_action => 'update emp set esal=esal*10 ;',
start_date => SYSDATE,
repeat_interval => 'FREQ=DAILY; INTERVAL=10',
comments => 'Iam tesing scheduler');
end;
PL/SQL procedure successfully completed.
Verification
To verify that job was created, the DBA | ALL | USER_SCHEDULER_JOBS view can be queried.
SQL> select job_name,enabled,run_count from user_scheduler_jobs;
JOB_NAME ENABL RUN_COUNT
TEST_abc FALSE 0
Note :
As you can see from the results, the job was indeed created, but is not enabled because the ENABLE attribute was not explicitly set in the CREATE_JOB procedure.
Run your job
SQL> begin
2 dbms_scheduler.run_job('TEST_abc',TRUE);
3* end;
SQL> /
PL/SQL procedure successfully completed.
SQL> select job_name,enabled,run_count from user_scheduler_jobs;
JOB_NAME ENABL RUN_COUNT
TEST_ABC FALSE 0
Copying Jobs
SQL> begin
2 dbms_scheduler.copy_job('TEST_ABC','NEW_TEST_ABC');
3 END;
4 /
PL/SQL procedure successfully completed. Hope it will help you upto some level..!!
Regards
K

How to schedule the job to run evry Sunday at 12 P.M IST.

Hi Experts,
I want to schedule a job which will run evry Sunday at 12 P.M IST.
I have written the below script.
[code]BEGIN
SYS.DBMS_SCHEDULER.CREATE_JOB
       job_name        => 'SERVICE_SAL_FS.SAL_MESSAGE_BUFFER_PURGE_JOB'
      ,start_date      => SYSTIMESTAMP
      ,repeat_interval => 'FREQ=WEEKLY; BYDAY=SUN; BYHOUR=12;BYMINUTE=0; BYSECOND=0;'
      ,end_date        => NULL
      ,job_class       => 'DEFAULT_JOB_CLASS'
      ,job_type        => 'STORED_PROCEDURE'
      ,job_action      => 'SERVICE_SAL_FS.SAL_MESSAGE_BUFFER_PURGE_PROC'
      ,comments        => 'Run at 12 P.M.IST every Sunday'
      ,enabled            => TRUE
END;[/code]
But the server in US.
[code]SELECT sysdate from Dual;
6/11/2013 3:58:58 AM
--But the time in India is 02:28 PM [/code]
How to convert the timezone to IST.
Please help me how to schedule the job to run evry Sunday at 12 P.M IST.
Thanks.

Did you read DBMS_SCHEDULER docs:
The calendaring syntax does not allow you to specify a time zone. Instead the Scheduler retrieves the time zone from the start_date argument. If jobs must follow daylight savings adjustments you must make sure that you specify a region name for the time zone of the start_date. For example specifying the start_date time zone as 'US/Eastern' in New York will make sure that daylight saving adjustments are automatically applied. If instead the time zone of the start_date is set to an absolute offset, such as '-5:00', daylight savings adjustments are not followed and your job execution will be off by an hour half of the year.
When start_date is NULL, the Scheduler will determine the time zone for the repeat interval as follows:
It will check whether the session time zone is a region name. The session time zone can be set by either:
Issuing an ALTER SESSION statement, for example:
SQL> ALTER SESSION SET time_zone = 'Asia/Shanghai';
Setting the ORA_SDTZ environment variable.
If the session time zone is an absolute offset instead of a region name, the Scheduler will use the value of the DEFAULT_TIMEZONE Scheduler attribute. For more information, see the SET_SCHEDULER_ATTRIBUTE Procedure.
If the DEFAULT_TIMEZONE attribute is NULL, the Scheduler will use the time zone of systimestamp when the job or window is enabled.
SY.

How to insert the data from XML to a table

Hi,
I'm using Oracle 10g Express Edition
I need help in How to insert the data from XML file into the table.
Below is the example i'm working on..
I have create ridb user with below mentioned privileges:
Account Status Locked Unlocked
Default Tablespace: USERS
Temporary Tablespace: TEMP
User Privileges :
Roles:
CONNECT
RESOURCE
Direct Grant System Privileges:
CREATE DATABASE LINK
CREATE MATERIALIZED VIEW
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
CREATE VIEW
& table is created TRIALZIPCODES below mentioned is the DDL:
CREATE TABLE TRIALZIPCODES
STATE_ABBR VARCHAR2(20) NOT NULL
, ZIP_CODE NUMBER(10, 0) NOT NULL
, ZIP_CODE_EXT VARCHAR2(20)
Below is the XML FILE: which is stored in C:\OracleProject Folder
File name: trial.xml
<?xml version="1.0" ?>
<metadata>
- <Zipcodes>
- <mappings Record="4">
<STATE_ABBREVIATION>CA</STATE_ABBREVIATION>
<ZIPCODE>94301</ZIPCODE>
</mappings>
- <mappings Record="5">
<STATE_ABBREVIATION>CO</STATE_ABBREVIATION>
<ZIPCODE>80323</ZIPCODE>
<ZIP_CODE_EXTN>9277</ZIP_CODE_EXTN>
</mappings>
</Zipcodes>
</metadata>
PL/SQL Procedure:which i'm trying to execute from SQLDeveloper
create or replace
PROCEDURE TRIAL AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
begin
-- DBMS_XMLGEN.setRowTag ( ctx IN ctxHandle, rowTag IN VARCHAR2);
-- DBMS_XMLGEN.setRowSetTag ( ctx IN ctxHandle, rowSetTag IN VARCHAR2);
-- the name of the table as specified in our DTD
DBMS_XMLGEN.SETROWSETTAG(l_context_handle,'zipcodes');
-- the name of the data set as specified in our DTD
DBMS_xmlgen.setRowTag(l_context_handle,'mappings');
-- for getting the output on the screen
dbms_output.enable(1000000);
-- open the XML document in read only mode
v_FileHandle := utl_file.fopen('c:/OracleProject','trial.xml', 'r');
loop
BEGIN
utl_file.get_line(v_FileHandle, charString);
exception
when no_data_found then
utl_file.fclose(v_FileHandle);
exit;
END;
dbms_output.put_line(charString);
if finalStr is not null then
finalStr := finalStr || charString;
else
finalStr := charString;
end if;
end loop;
-- for inserting the XML data into the table
insCtx := DBMS_XMLSTORE.NEWCONTEXT('RIDB.TRIALZIPCODES');
insCtx := DBMS_XMLSTORE.INSERTXML(insCtx, finalStr);
dbms_output.put_line('INSERT DONE '||TO_CHAR(rowsp));
DBMS_XMLStore.closeContext(insCtx);
END;
END TRIAL;
For the first time when i complied i got the errors as :
Procedure RIDB.PROCEDURE1@RIDB
Error(16,14): PLS-00201: identifier 'UTL_FILE' must be declared
Error(16,14): PL/SQL: Item ignored
Error(29,1): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(29,1): PL/SQL: Statement ignored
Error(33,1): PL/SQL: Statement ignored
Error(33,19): PLS-00320: the declaration of the type of this expression is incomplete or malformed
Error(36,1): PL/SQL: Statement ignored
Error(36,17): PLS-00320: the declaration of the type of this expression is incomplete or malformed
So i logged in as sys & grant the permission to execute on UTL_FILE to ridb (user):
SQL Statement:
grant execute on utl_file to ridb
So, it got compiled successfully but when i execute it gives me error as:
Source does not have a runnable target.
What does this mean?
So I browse through forum & i got to know that i need to initial the UTL_FILE_DIR ="C:/OracleProject" in init.ora
So can i edit the init.ora with notepad.When i tried to do that it says permission denied
In my system it shows the init.ora file in path C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts
but there is also other file initXETemp in the same path do i need to do the changes in it.
I have tried even editing the SPFILE as mentioned below:
C:\oraclexe\app\oracle\product\10.2.0\server\dbs\SPFILEEXE - I had edit this file using notepad & set the value of UTL_FILE_DIR ="C:/OracleProject". So next time when i restarted i'm unable to log on to the database.
So i had reinstall the software again.
Could you please let me know how to proceed..

hi,
I have created the directory from sys database
CREATE or replace DIRECTORY XML_DIR2 AS 'C:\OracleProject';
& grant read,write access to the user
grant read,write on directory XML_DIR2 to RIDB;
& i had change the tag name in the xml file as shown below:
<?xml version = '1.0'?>
<metadata>
<Zipcodes>
<mappings Record="4">
<STABBRE>CA</STABBRE>
<ZIPCODE>94301</ZIPCODE>
</mappings>
<mappings Record="5">
<STABBRE>CO</STABBRE>
<ZIPCODE>80323</ZIPCODE>
<ZIPCODEEXT>9277</ZIPCODEEXT>
</mappings>
</Zipcodes>
</metadata>
TRIALZIPCODE table as shown below:
CREATE TABLE "RIDB"."TRIALZIPCODE"
(     "STABBRE" VARCHAR2(20 BYTE),
     "ZIPCODE" NUMBER(*,6) NOT NULL ENABLE,
     "ZIPCODEEXT" NUMBER
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
I have tried two methods as shown below:
Procedure 1:
create or replace
PROCEDURE TRIAL_V2 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
insCtx := DBMS_XMLStore.newContext('DEV.TRIALZIPCODES');
DBMS_XMLStore.setUpdateColumn(insCtx, 'STABBRE');
DBMS_XMLStore.setUpdateColumn(insCtx, 'ZIPCODE');
DBMS_XMLStore.setUpdatecolumn(insCtx, 'ZIPCODEEXT');
DBMS_XMLStore.setRowTag(insCtx, 'mappings');
cnt := DBMS_XMLStore.insertXML(insCtx, xmldoc);
DBMS_XMLStore.closeContext(insCtx);
END;
Procedure 1 was compiled with out errors but when i execute i got the error as :
Source does not have a runnable target.
Procedure 2_
CREATE OR REPLACE PROCEDURE TRIAL_V3 AS
BEGIN
DECLARE
-- declare attributes
charString varchar2(80);
finalStr varchar2(4000) := null;
rowsp integer;
v_FileHandle UTL_FILE.FILE_TYPE;
l_context_handle dbms_xmlgen.ctxHandle;
insCtx DBMS_XMLStore.ctxType;
cnt NUMBER;
xmldoc xmltype := xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') );
--XML_DIR VARCHAR2(40) := 'C:\\OracleProject';
BEGIN
INSERT INTO trialzipcode (STABBRE, ZIPCODE, ZIPCODEEXT)
SELECT extractvalue(x.column_value, 'mappings/STABBRE'),
extractvalue(x.column_value, 'mappings/ZIPCODE'),
extractvalue(x.column_value, 'mappings/ZIPCODEEXT')
FROM TABLE(
XMLSequence(
EXTRACT(
xmltype( bfilename('XML_DIR2','trialxml.xml'), nls_charset_id('AL32UTF8') ),
'metadata/Zipcodes/mappings'
) x
END;
END TRIAL_V3;
Procedure 2 was complied without errors but when i execute i got the error as:
Connecting to the database RIDB.
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at "RIDB.TRIAL_V3", line 12
ORA-06512: at line 2
Process exited.
Disconnecting from the database RIDB.
Could you please let me know how to proceed...

Need how to get the data from the external file in eCatt

Hi ,
Could any body suggest how to get the values from the external file(Excel,CSV file,Text file) and pass it as varaiable in ecatt Test script.
Problem: Need to execute FK01-Vendor creation Transaction with multiple set of data .As per my understanding we could achive through Variants in Testdata set in eCatt .
But is there any way to store the data in excell file and get the data and pass it to FK01 Test scripts
Appreciate response on this

Hi
See the links they may be useful
check these link,
eCATT- An Introduction
/people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
Creating Test Scripts
/people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
eCATT Logs
/people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
eCATT Scripts Creation TCD Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
Creation of Test Data Container
/people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
eCATT Scripts Creation - SAPGUI Mode
/people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
Integrating ECATT & MERCURY QTP Part -1
/people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
Using eCatt to Test Web Dynpro ABAP
/people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
and
-command reference
http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
/people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
http://prasadbabu.blogspot.com
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
http://www.erpgenie.com/ecatt/index.htm
hope this helps.
Reward points for useful Answers
Regards
Anji

How to call Provisioning Job from On-Demand Job.

Hi Experts,
I need your help.
I am using SAP IDM 7.2
Please tell me how to call provisioning Job from ON-Demand Job.
Regards,
C Kumar

As everyone else has already mentioned, the uProvision function is probably what you're looking for. It's well documented in the helpfile so I won't add the parameter description here. A provisioning task can only be run on a mskey/taskid combination so you need to provide both to start the task. That means that you should have a global or job constant pointing to the task, and a script or source select statement that looks up the mskey that you want to start.
Simple example, using a To Generic pass to start the task "Dispatcher test #1.0.0" for 1000 entries whos names start with "USER.10K.TEEST"
Source:
To Generic pass destionation:
TASKID could also be a global constant w. a task reference since tasknames have no uniqueness.
Source SQL Statement:
select top 1000 mcmskey mskey,(select taskid from MXP_Tasks where TaskName = 'Dispatcher test #1.0.0') as taskid
from idmv_entry_simple where mcMskeyValue like 'USER.10KTEEST.%'
Destionation script:
// Main function: execT
function execT(Par){
mskey = Par.get("MSKEY");
taskid = Par.get("TASKID");
OutString = uProvision(mskey,taskid,0,0,"test dispatcer #1.0.0",0);
// uInfo(mskey+":"+taskid+":"+OutString);
return "";
Br,
Chris

How to execute the job from script ??

Similar Messages

Maybe you are looking for