How to Export a WMV file in High Quality but low MB?

I'm really afraid you are the only person who can answer that.
ANY compression is totally relative: what do you think is small? What do you define as high quality?
I can get a 5 minute wmv file at just under 100mb that I find acceptable for browser downloads. You might think that's too big. I don't.
Trial and error is the only way. Personally, I've set up a compressor preset to crunch my wmv files. While it's doing it's thing, I can do something else.

Similar Messages

How to export a complex Keynote to high quality video for DVD?

I have had dozens of attempts to turn a complex Keynote into a high quality video.
Either they turn out disappointiingly way low res
or they are very choppy with half the transitions gone
or they Cannot make the video at all
HELP.
I need to turn this project in to my client today.

If you use the DVD export in Keynote 3 with a self playing movie, the quality will be fine...just don't trust what you see on your mac screen, play it on a DVD player to check the quality. I did a test a while back and it was only the pauses that looked bad.
Read about it here:
http://www.keynoteuser.com/news/?p=135
pay close attention to what I complain about...it's just the slide pauses, not the normal motion playback, which means selfplaying stuff looks pretty decent (though never as good as the original, but that's the fault of the DVD format, not Apple).

How to Render in Premiere pro CS 5.5 High quality but low file size

Hello everybody,
I am using premiere pro CS5.5. I have rendered in premiere pro .mts file this settings : (NTSC, 1280X720,245fps,VBR 1 pass, target bit rate 6mb and max bitrate 9.0mb) my original file size : 2.1GB. after rendering file size 683MB. but render file is flickering. if i increase bid rate, then file no flickering but file size be very large. have any suggestion to reduce file size without flickering.
N.B: This video is green screen shot. so, i use some effect such as (chroma key and noise remover).

Try the Photoshop forum. The PS experts hang out over there.
http://forums.adobe.com/community/photoshop

How do I export an iMovie to a high quality version that can be played on a pc

Ok here's the stitch- I made a short project (about 2:30) and exported it to a m4v high quality video. It was about 54 mb and the resolution was great on my pc. however, I edited the project and when I exported it again it ended up as a really low resolution mp4 video and was only 3.9 ish mb. How do I get convert my iMovie to a high quality m4v video or other high quality file for a pc?

Ps I have a toshiba laptop and I made the imovie on my Mac desktop at school (and I don't know which model/year iMovie and Mac I have)

Converting .wmv to .mov files or how do i get .wmv files into itunes?help!

i recently got some video but some of it is in .wmv format and i need to know how to convert these to .mov format
or
how do i get .wmv files into iTunes.
plz help

Intervideo sells software that will convert your files into a format that can be read by an Ipod.

How do I read wmv files on my mac

how do i read wmv files on my mac. Is there a safe/secure download i can use

Use the free version of Flip4Mac. If those WMV files contain DRM, you don't.
(64098)

How can I open wmv files on my new iMac Pro?

How can I open wmv files on my new iMac Pro? Is there a programme that will help? My friends all have pc's and send me stuff that I can't open.
Thanks for your help.
iMac Mac OS X (10.4.10)

Install Flip4Mac - VersionTracker or MacUpdate.

Need to convert video and audio files in high quality

Hi to all, i need to convert file types such as .AVI, .WMV and .MOV and keep the high quality, but i dont have or know any software to do this, are there any good options out there?
I don't really want to use a trial version, thanks.

I've used FFMpegX for my conversions. I've never looked at them on a large screen to see how well the video quality held on, but they look fine on my MacBook.
http://www.ffmpegx.com/
~Lyssa

I am trying to export an Ai file as a dxf - but keep getting a PARM error. What can i do?

I am trying to export an Ai file as a dxf - but keep getting a PARM error. What can i do?

You can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec.

Dvcam footage exporting "h.264 dv-pal high quality" isn't looking good?

hello guys
thank you for assistance in my previous post. i couldn't thank you guys for some reason.
however this is a related issue, my dv cam footage which i have edited and export isn't coming out at good quality as is on the preview screen, its looking alot more blurry.
the export settings i am selecting is h.264 and dv pal high quality?
i want to burn the dv footage onto dvd video, so i need settings which will enable the best quality for this.
can you please reccomend the settings i need
thank you

i don't have these options in export media...are these additonal codecs i need to buy
( i will have a look when i am at home to see the options i have)
Kind regards
Date: Mon, 13 Feb 2012 09:41:20 -0700
From: [email protected]
To: [email protected]
Subject: dvcam footage exporting "h.264 dv-pal high quality" isn't looking good?
    Re: dvcam footage exporting "h.264 dv-pal high quality" isn't looking good?
    created by Jim Simon in Premiere Pro CS5 & CS5.5 - View the full discussion
For DVD you can't use H.264. You need MPEG2-DVD.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4203685#4203685
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4203685#4203685. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5 & CS5.5 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Using Premiere Pro CS3 When exporting as flash file poor picture quality

I'm using Premiere Pro CS3. I shoot green screen in HDV and work in 1440 x 1080. I have been capturing files in Premiere and sending them to Serious Magic Ulta 2. I use this program for keying and adding virtual backgrounds. I save these files as avi. with a resolution of 1440 X 1080. I then bring them back into Premiere Pro for final edit. When I export these video's encoded as mpeg2 theyplay very clear. I am now trying to export as flv. with alpha channel background and the resolution is poor. I working on the transparent background with walk on spokespersons that overlay the HTML page. When In try to play them on my computer the adobe media player is what comes up. I have downloaded flash player but it doesn't select it to play the video. I'm running windows Vista Business platform. What am I doing wrong.

Thanks for the reply.
The capture and editing have already been done in 1440 X 1080. Should I use this resolution rather than trying to bump it up to 1920 X 1080.
Thanks
Bill Bennett
Date: Fri, 2 Sep 2011 07:33:04 -0600
From: [email protected]
To: [email protected]
Subject: Using Premiere Pro CS3 When exporting as flash file poor picture quality
Computer playback generally prefers square pixels. Make sure to set your output resolution to 1920 x 1080 using a Pixel Aspect Ratio (PAR) of 1.0 or Square.
See if that helps.
>

How ro export small (compressed) files (.mpg) with sound from FCP or compr.

I have some dv pal footage that I need to store in in very small files. Then I need to convert it back to dv, for editing.
The quality (regarding artefacts and all that) is not important. The stuff was ripped from DVDs originally and are only to be used as reference.
Can I export an .mpg file with sound muxed into it from FCP or Compressor?
H.264 produces to big files.
Thanks for any replyes:)
Message was edited by: Citizen_K

Hm, what a weird workflow.
I presume you are trying to edit with this stuff in FCP, so my question is, If you are grabbing media off DVDs, and converting with MPEG Streamclip or some such thing, and then trying to down-rez to edit with proxy footage, how do you plan to use timecode to reconnect to the high-res media when your cut is done?
h.264 can produce to big files or small files, depending on the settings of the file you tell it to produce to.
Consider that the amount of time you would spend converting media back and forth to low-res formats of lousy quality could be much more valuable than the cost of a firewire drive which you could use to convert your DVDs directly to DV, which you will find much easier to work with.
Hope this is helpful to U

Iphone how to 4 view .wmv file

How can I view a .wmv file on my iPhone 4S

Convert them to something ios devices can play
This is the videoo formats ios devices support
Video formats supported: H.264 video up to 1080p, 60 frames per second, High Profile level 4.2 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Low quality exports as .wmv files

Hello,
I'm using Premiere Pro CS4/Windows XP.
I've seen a couple other posts relating to this subject, but was wondering if someone could advise me on the best way to export to achieve a 320x240 wmv file. I'm scaling down from an avi file, edited with chroma key so I could replace the background.
I tried some of the NTSC Source export settings, but was unable to open the exported wmvs on my computer. The only setting that seems to work is the Zune Video setting, which specifically exports to the size I need. However, the quality is not very good.
Will I ever be able to achieve a wmv file that matches the quality of H264/mp4? We're using a webcast service which requires us to upload either wmv or flv videos, so are rather limited.
If anyone can recommend the best settings, I would be extremely grateful.
Thank you,
Christine

hiya,
might as well post this here....
Bill...just did wmv export for youtube ( sample as per other thread )
to bring into focus for this post...I am putting my project settings too...basically I matched the project settings except for the audio going down to 44khz from 48... I coulda kept that at 48khz...
IF THIS was interlaced I would check the box that says " allow interleaving "...
IF THIS was interlaced that I want to export progressive I would check "deinterlace" and NOT have allow interleaving" checked....also I would make the progressive dimensions roughly HALF of the interleaved size...cause you lose half the vertical resolution going from interleaved to progressive.
In my sample for youtube I really crank up the bitrate... seems to work well....as it gets converted by youtube...
added some youtube screens also, reference how to upload the video to that place...for Bill ----
NOTE: The settings put you into a custom mode...where you are choosing all your settings..not a preset ...
result

How to export an XML file from oracle database?

plz help me its urgent requirement....could u pls tell me the step by step procedure for following questions...?how to export a data as an XML file from oracle database?
thanks in advance,
Bala.
Edited by: user3523292 on Nov 14, 2008 5:43 AM

user3523292 wrote:
plz help me its urgent requirement....could u pls tell me the step by step procedure for following questions...?how to export a data as an XML file from oracle database?
thanks in advance,
Bala.
Edited by: user3523292 on Nov 14, 2008 5:43 AMThis is a forum of volunteers. There is no "urgent" here. Nevertheless, a google search of 'xml oracle export' quickly lead me to this Oracle site:
otn.oracle.com/sample_code/tech/xml/index.html
I also see lots of hits when I search the documentation library at tahiti.oracle.com for 'xml'. This one in particular may be what you are looking for:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14252/adx_j_xsu.htm#ADXDK070

How to Export a WMV file in High Quality but low MB?

Similar Messages

Maybe you are looking for