How to extend VLAN in 3rd and 4th 6513 switch with HSRP

Hi presently in One Data centre 02 Nos. of 6513 is configured in HSRP. Due to space constraint some servers need to be installed in other room and there 02 Nos of 6509 switches need to be configured in HSRP again.
One Data Vlan needs to be extended in expanded room. What should be the best practice for configuration in 6509 switches in HSRP. Please suggest.

Just as #1 and #2 are connected with (I would assume) trunking ports, similarly add connections to #3 and #4 Catalyst 6k. Define the layer 2 VLANs in the 6509 and assign access ports to those VLANs as required.
Personally I don't see much value to adding L3 interfaces (SVIs) for the VLANs (and adding them to the HSRP groups) on the 6509s. It depends in part on how your other connectivity into them is setup. If everything leaving the server VLAN goes to users, WAN, Internet etc. via the original pair of 6513s then keep the 6509s simple with only layer 2 VLANs.

Similar Messages

Can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

thanks

Do Ipod touch 3rd and 4th generations come with 16 GB

Hi,
I'm confused. We bought our daughter an Ipod Touch 4G for Christmas and the product listing said 16 GB. Now we are looking to puchase a used Ipod Touch 3G 16 GB for her little brother to play games and listen to music. However, in my research I'm finding that Apple does not list either of these generations (3rd OR 4th) as coming with 16 GB, only 32 GB or 64 GB. Can anyone clear this up for me as I see tons of 3G/16 GB listings on Ebay and I'm wondering if they are valid or are they actually 2G. I know there is a difference in model no. but what are the true differences? Also, will a 3G be sufficient for the game-playing or do most of the new games require a higher IOS than the 3G can run? (No matter how much $ we save by buying an earlier generation, it will be money wasted if it's not useful!!) Thanks.

Apple did not release a 16GB 3rd-generation iPod touch, only 32GB and 64GB models, so any such claims are in error. You can learn how to differentiate the different models, and see the capacities they come/came in, here:
http://support.apple.com/kb/HT1353
As to whether to purchase a 3rd-gen unit, I'd advise against it. It can't run the current version of iOS, iOS 6, and hence will see fewer and fewer apps available for it. Get at least a 4th-gen model.
Regards.

What is the difference between the ipod touch 3rd and 4th generation

what is the difference between the ipod touch 3rd and 4th generation

http://www.everyipod.com/ipod-faq/differences-between-4th-gen-ipod-touch-3rd-gen -ipod-touch.html
http://support.apple.com/kb/ht1353

How to open a pdf file and then attach it with images

I am new to Indesign Server.
I'm currently working on a pdf.
I have a white blank pdf template.
that I want to attach/glue it with images.
How to open a pdf file and then attach it with images.
Please, help me.
Thanks.

First step would be to make yourself familiar with InDesign desktop version.
Whatever you intend to achieve, do it there manually. (see regular app docs or forums)
Then try to automate your steps with scripting (see scripting docs or forum)
If you can do it with a script in the desktop version, that script will likely also run in ID Server. (see server forum).
If you can specify missing features not achievable thru scripting or manual use, reconsider to write a plugin (this forum).
A seasoned C++ programmer will need a few months to learn the basics, wade thru tons of documentation etc. Alternatively consider to hire a consultant to do the development work for you.
Dirk

WBS Hirarachy Issue at 2nd , 3rd and 4th Level

Hi ,
I am loading the planning data from 3rd party system using UDC . planning data had wbs element . Planning amount will post some time at 2nd leve or 3rd or 4th or 5th Level .
I am using SAP stadard WBS hirarchy for reporting . If 5th level node has possting stadard hirachy showing perfectly because wbs hierarchy is rollup of 5th level postings and also alwasy posting at 5th level in r/3. but I am loading the data from 3rd party system so 2,3,4th levels also has postings. so 2,3,4 th level amounts are not adding into the standard hierarchy and   amounts are displaying under unassigne node in WBS standard Hierarchy . 2,3,4th level amount not adding into the Stadard wbs hirarchy .
If the amount post at 5th level no issues stadard hirarchy working fine
like this
WBS
D-01----
200
D-01-01-02----
200
D-01-01-02-03----
200
D-01-01-02-03-04----100
D-01-01-02-03-04----100
If the amount post at 2nd level 3rd leve
WBS
D-01----
200
D-01-01-02----
200
D-01-01-02-03----
200
D-01-01-02-03-04----100
D-01-01-02-03-04----100
unassign nodes
d02----
300
d0505----
400
r030405----
1000 like this
Please help me how to resolve this issue . How to get 2nd level and 3rd level amounts in standard hirarchy.
Thanks
Rohan

To any moderator: could you please move this post to "Desktop Environments", as it is related to Xorg and maybe someone might have an idea in this forum. Thank you. tetrapilot.

IE Added Primary & Secondary Start Pages - Randon 3rd and 4th tabs popping up

I created a GPO that adds a primary and secondary home page tabs in IE. I am using:
User Configuration -> Preferences -> Windows Settings -> Registry
New Registry Item:
Action: Update
Hive: HKCU
Key Path: Software\Microsoft\Internet Explorer\Main\
Value Name: Start Page or Secondary Start Page
Value Type: Reg_SZ
Value Data: http://mysites.com
When I open the browser, I get the two sites I added, but additionally I get another 3rd or 4th tab that opens to urls with random strings such as: http://xn--foa3045d/
The only thing that is common is the http://xn--
Any idea why this may be occurring. I am pretty sure it isn't malware because if I remove the GPO, the random tabs go away.
Thanks!

Hi,
Regarding the current issue, please do not deploy multiple homepages via Registry Items in GPP. Instead, please try to configure it in Internet Settings in GPP to see if the same issue occurs.
For details, please refer to the following articles.
Best Practice: How to use Group Policy to configure home page settings
http://www.grouppolicy.biz/2010/02/how-to-use-group-policy-to-configure-home-page-settings-part-1/
http://www.grouppolicy.biz/2010/03/how-to-use-group-policy-to-configure-home-page-settings-part-2/
http://www.grouppolicy.biz/2010/05/how-to-use-group-policy-to-configure-home-page-part-3/
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

How to extend a wifi network of third party router with TC 4th generation?

After searching the communities for a while, I did not find a definitive answer on the following question:
- I recently bought a 4th generation Time Capsule 2TB (MD0322/A), that I also want to use as an extension for our existing wifi network.
- This wifi network is maintained by a Sitecom Wireless 300N XR Gigabit Router. Router is set to work over 2.4 GHz (B+G+N) because of several non-N-wifi devices in the network. The channel in use is currently 11.
- This router provides so called WDS functionality, i.e. the ability for other wifi access points to act as a seamless extension of the basic wifi network (using the same SSID).
- The security settings in the router are WPA2 Mixed, with a password in plain ASCII.
- There seems to be no way to set different security levels for WDS-connections versus normal AP (access point) connections. If WDS is enabled, the security settings of the AP-mode are extended to the WDS connection.
I have set the Sitecom router to enable WDS, and added the MAC-address of the TC in the configuration of this router.
When configuring the Time Capsule, with Airport Utility 5.5.3, I can select the option to use TC to extend an existing network, and I can select the network of choice using the WPA personal or WPA/WPA personal security. However, the TC does not succeed in extending the network, and reports this back. If I manually configure the TC and select the network of choice, Airport Utility reports back that the selected network cannot be extended.
I have read several times in other posts that Time Capsule can only connect to third party routers via WDS using WEP-authentication, but these posts were quite old. I was wondering if this is still the case, or that Apple has updated this functionality in newer versions of TC, and thus there could exist a trick to connect to a WDS using WPA.
I really would appreciate suggestions
Bram Bos

gilles13 wrote:
I have a mac and pc (win7) both are connected thru a network with wifi and allready two access pt.
Airport can not be used to extend a WiFi created by a non-Apple box.
You need to turn off the radio in the router (shut down the existing WiFi). Purchase TWO Airport Express units. Connect one to the router with an Ethernet cable. Configure that one as your primary WiFi network and then use the second Express as the extender.
You need to locate the second Express where it receives a decent WiFi signal. Too far away and it has nothing to extend. Too close and it doesn't buy you anything. Before you plug in the second Express, check to see where the primary WiFi disappears completely. My personal WAG is that you want to locate the second Express 2/3 the distance to that point.
If you use Airport Utility to configure the units, it's a snap. In fact, if you configure the primary first and the extender second, AU will default to exactly the settings that you want.
By the way, I refereed to the Express because it's less expensive than the Extreme and you didn't indicate any need for the Extreme features.

Hi. Does anyone know how to extend the airport express and extreme with Cisco Router DPC3925. I have upgrade my wireless to 50Mbps. Thank you

Hi,
Can someone help.
I have a Cisco router DPC3925 provided by the ISP and I cannot extend my wireless with Airport Express.
Also I intend to extend it with Airport Extreme.
Please help.
Thank you.

Sorry, but your post is not clear. The topic of this thread is how to extend an AirPort Express or AirPort Extreme with a Cisco router.
This would mean that the main router was an AirPort device and the Cisco would be extending the existing network provided by the AirPort.
Is that really what you want to do?
If not, then it sounds like your Cisco ISP provided wireless router is your "main" router and you will be using the Time Capsule to extend the network.
Please start another post to tell us exactly.......
What device will be the main router providing your Internet connection and wireless network
What device will extend the network
What operating system that you have on your Mac or PC

How to extend the IDoc ORDERS05 and populate values?

Hi,
My requirement is to add few fields to the standard IDoc ORDERS05 and populate values to the newly added fields.
Please let me know how to extend the standard IDoc ORDERS05.
Regards,
Balaji. R

Hi balaji,
you can try to google for SAP R/3 IDoc Cookbook for EDI and Interfaces by Axel Angeli et.al.
Although Axel refers primarily to MATMAS Idoc the technique of extending IDOCs is explained very well.
Also very good is the search function here on SCN, I just found
[Some Experience on IDoc Enhancement|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3414900%29ID0711317150DB10743789739220747754End?blog=/pub/wlg/8285]
Blogs and Wikis here are the best source for general questions like yours, usually of much more value than forum answers
Regards,
Clemens

Difference between 3rd and 4th gen ipad

Can someone share the difference between the 3rd gen and 4th gen ipad? And when were their release dates? Thanks...

Pre-order
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/1adc653c511151b3ace 028e44ffc0d99.jpg
Shipping WiFi
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/2147b96616d05659dd9 71ad0295298d8.jpg
Shipping WiFi+Cellular
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/04ee5f1921d5cdc707b 77c591f7919fa.jpg

Can I use a 3rd and 4th generation shuffle cable to charge and sync a 2nd generation shuffle?

I have a 2nd generation ipod shuffle that belongs to my sister-in-law, but she cannot find the cable. I was wondering if I purchased a cable, intended for 3rd or 4th generation shuffles, would it still work?

No. It fits, but the connector is different. This is the official replacement part
http://store.apple.com/us/product/MA694G/A/apple-ipod-shuffle-dock
There are also third-party replacements that cost less. Some have a mini-dock, some just have the plug, and some don't even have a cable between the plug for the headphones jack and the USB plug. Just read the product description to make sure it is for the 2nd gen shuffle.

How can I sync my Ipod Touch 4th Gen calendar with my comcast caledar on my computer?

Can anyone tell me how to sync my Ipod Touch 4th Gen calendar with the calendar on my Comcast email system?

Does the ComCast calendar alow y to syc it with a service like Google calendar?
https://discussions.apple.com/thread/3739244?start=0&tstart=0
http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/Calendar-sync-with- iPhone/td-p/956099
Maybe:
http://www.justanswer.com/mac-computers/6ei9d-new-iphone-when-try-sync-comcast-e mail.html

How can I make waveform graph and/or excel file with two different dynamic DBL values?

As the question describes, I have two dbl sources from a load cell and linear actuator (from firgelli). I want to make a load/displacement curve from the force readings from the load cell and the displacement readings from the linear actuator. The load cell outputs an analog signal that can be acquired by a DAQ and the actuator comes in with a board and VI program to control the speed and measure the displacement of the actuator to a sample rate of my choosing. Is there a way that I can make a VI where it continues to collect data and construct the graph I'm looking for?
Solved!
Go to Solution.

A couple points about your application:
1. Synchronization. Since you're ultimate goal is a stress/strain curve, it is vital that your force and displacement data be synchronized appropriately. If your sampling is beyond a few times a second, this is not really possible without some form of hardware synchronization via either a trigger and/or sample clock. Two NI DAQ boards can be synchronized this way easily, but it seems you're using 3rd party hardware for one of these processes. Would need to know more about that board to know what options you have. You could specify what your resolution is in distance, and how fast the article will be moving, to get an idea of how fast to acquire, and how well you'll need to synchronize the data. Another option, since it appears each data stream will be sampled on a hardware-timed sample clock, they will be offset in time, but not skewed during the acquisition. You may be able to identify a feature in the data set common to each and use that to remove the timing offset after the process is completed.
2. Display. To display data during the acquisition process, I usually recommend at least one display that plots vs. time. Much easier to spot irregularities with the acquisition process that way. However, if you'd like to also plot force vs. displacement, you can use an XY Graph to plot parametrically. For Example, in your case you would use the Displacement data as the X coordinates, and the Force data as the Y coordinates.
3. Saving data to file. I would recommend using the Save to Spreadsheet File.vi (File IO pallette) to save your data. If you use a comma as the delimiter, and save the file with a *.csv extension, you will have a file that is easily read into excel. The standard tab-delimited spreadsheet file is also fine, it will just require an extra step to read it into excel to specify to excel what the delimiter is.
4. Batch vs. Real-Time Recording (Data File). If your process is short (< 30 sec) you may be better off acquiring the data, Storing it locally to the VI (Array - usually maintained in a shift register), and then writing the file with a header (acquisition parameters, test article information, data column headers) and the data all at once in batch mode to the file after the process is finished. If, however, it is longer than that you would be better off starting a data file with a header and appending the data to the file as you go, so that if something happens during your test, you at least have data up to that point.
Hope this Helps,
Kurt

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

How to extend VLAN in 3rd and 4th 6513 switch with HSRP

Similar Messages

Maybe you are looking for