How to extract data from the XL sheet for mapping

Hello all,
I have a scenario of file to idoc, where in the source file contains the information in XL sheet. Can we access the XL sheet data for mapping ? if so can anyone helpme providing the procedure.

Hi,
For reading an XL file u need to write an java code.
refer the below weblog for more help:
SAP Network Blog: XI: Generating Excel files without the Java nor the Conversion agent not possible?
/people/michal.krawczyk2/blog/2005/12/10/xi-generating-excel-files-without-the-java-nor-the-conversion-agent-not-possible
SAP Network Blog: Read Excel instead of XML through FileAdapter
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
Thnx
Chirag

Similar Messages

  • How to extract data from the fields present in two or three tables

    Hi Experts,
          I have a scenario where i have to extract data from the fields of different tables. e.g. let there 2 tables which have some number of fields . I want the data of 3 fields each from these 2 tables. How can i get that??
    Sam

    Hi
    You can create view in tcode se11..
    here you include all tables from which you want to fetch the data..
    you need to give selection condition here
    eg..
    say select empname from table A, select empadd from table B.. where empno(from A)=empno(from B)
    (note that you dont need to write queries like this.. i have just given u the example)
    After creating the view you can create datasource in RSO2..
    Regards
    Swati

  • How to Extract Data from the PDF file to an internal table.

    HI friends,
    How can i Extract data from a PDF file to an internal table....
    Thanks in Advance
    Shankar

    Shankar,
    Have a look at these threads:-
    extracting the data from pdf  file to internal table in abap
    Adobe Form (data extraction error)
    Chintan

  • How to Extract data from a Request management tool to Apex to avoid working on Excel reports

    Client uses a ticketing tool,I donot know what is the database for the tool,but I would like to know the best way to extract data from the tool to pex so that we can eliminate working on Excel reports.These excel reports are basically the open request log,resolved tickets,aging tickets etc,currently we work on many excel reports,can we achieve this in Apex ,if so how do we achieve this.Then we would like to use this report and prepare multiple charts,how the above two requirements can be mapped.

    A very important function for the system will be - one sends an email in certain format to a dummy email address, then some data will be extracted from the email based on the pre-defined format and inserted into the database my APEX application is using.
    Any idea on how I can make it happen please? I agree that this is not really an Apex question, but a more general PL/SQL question.
    There are many approaches, all boiling down to one of these two:
    1) Push: Some process in the mail server sends/forwards information to your database when new mail arrives.
    The language/tools used to do this, and the way it would connect to your database, depends on your environment (what is your operating system? mail server? existing middleware/tools? security protocols used? etc.).
    2) Pull: Some process in the database contacts the mail server and polls for new information.
    Ie. some PL/SQL code would communicate with the mail server. Again, it depends on your environment (what is your operating system? mail server? existing middleware/tools? security protocols used? etc.).
    For example, if you are using Exchange 2007 or newer, it has a web services API:
    http://msdn.microsoft.com/en-us/library/dd877045.aspx
    The challenge here will be to build the correct SOAP requests from PL/SQL, and to handle the security protocols used.
    - Morten
    http://ora-00001.blogspot.com

  • How to extract data from a structure?(Data Dictionary)

    Hi all,
           This is regarding extracting data from a structure.
    For Eg:if we want to extract data from a structure ADDR1_DATA,How will we do that in report programming?Structures on its own has no existence unless it s attached to a database table or view.when am using 'Where used List' on that structure also I am not getting any database tables or views.What can I do about this?
    Thanking you,
    anjaly

    HI Anjaly,
    as you said structure does not have any value .. unless something is added to it..
    So just use the structure to define the type of the sttructure you want..
    Or to include it in your itab like..
    data : Begin of itab occurs 0.
           include structure ADDR1_DATA.
    data  i type i.
           end of itab.
    you cannot directly extract data from the  structure ADDR1_DATA..
    regards
    satesh

  • How to extract data from SAP in FDM 11121

    I came across some documents from version 11113, says there is a SAP adapter, however ,when I check 11121 there's no such adapter, does anyone know how to extract data from SAP in FDM 11121?

    I download a package from Bristlecone, but I dont see any xml files in it, just a bunch of dll and I didn't find any instructions on how to set up/configure in FDM, it just explained how to register in SAP app server and client.
    Hyperion 11113 has readme on sap adapter(Hyperion Readme Template), but I cannot find the same readme file in 11121, all I can find is ERP Integration Adapter document. any idears where I can find at least a readme document?

  • How to extract data from web URL

    I was doing one project which need to extract data from web pages and then analyze these data. the question is how to extract data from there, using html parser? need help, thanks a lot

    I was doing one project which need to extract data
    from web pages and then analyze these data. the
    question is how to extract data from there, using
    html parser? need help, thanks a lotTry this:
    http://java.sun.com/docs/books/tutorial/networking/urls/readingURL.html
    Or, like you said yourself, use an HTML parser:
    http://java-source.net/open-source/html-parsers

  • How to extract data from Chart History?

    Dear all, I have read a lot of posts, but still don't understand how to extract data from Chart history.
    Suppose you acquired 1024 points of data every time, then use "build array" to build an array, then send to intensity chart to show, then save the history into a .txt file,  but how to extact data from the file?
    How Labview store the data in the 2D history buffer?
    Anybody has any examples?

    The simplest would be to save the 2D array as a spreadsheet file, the read it back the same way.
    Maybe the attached simple example can give you some ideas (LabVIEW 7.1). Just run it. At any time, press "write to file". At any later time, you can read the save data into the second history chart.
    If you are worried about performance, it might be better to use binary files, but it will be a little more complicated. See how far you get.
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    IntensityChartHistorySave.vi ‏79 KB

  • How to extract data from planning book

    nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
    Total Demand (Key Figure DMDTO):
    o     Forecast
    o     Sales Order
    o     Distribution Demand (Planned)
    o     Distribution Demand (Confirmed)
    o     Distribution Demand (TLB-Confirmed)
    o     Dependent Demand
    Total Receipts (Key Figure RECTO):
    o     Distribution Receipt (Planned)
    o     Distribution Receipt (Confirmed)
    o     Distribution Receipt (TLB-Confirmed)
    o     In-Transit
    o     Production (Planned)
    o     Production (Confirmed)
    o     Manufacture of Co-Products
    Stock on Hand (Key Figure STOCK):
    o     Stock on Hand (Excluding Blocked stock)
    o     Stock on Hand (Including Blocked stock)
    In-Transit Inventory (Cross-company stock transfers)
    Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
    Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

    Hello Debadrita,
    Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
    For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
    1) PLANNINGBOOK - the name of your planning book
    2) DATA_VIEW - name of your data view
    3) KEY_FIGURE_SELECTION - list of key figures you want to read
    4)  SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
    BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
    For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
    Please post again if you have questions.
    Hope this helps.

  • How to extract data from ODS to non-SAP system

    Hi,
    Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
    Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
    The non-SAP system is an unix system.
    Thanks in advance
    Ella

    Ella,
    You can look at it from the concept of a BADI / Infospoke
    Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
    Hope this helps...
    Arun
    Assign points if it helps

  • How to extract data from custom made Idoc that is not sent

    Hi experts,
    Could you please advise if there is a way how to extract data from custom made idoc (it collects a lot of data from different SAP tables)? Please note that this idoc is not sent as target system is not fully maintained.
    As by now, we would like to verify - what data is extracted now.
    Any help, would be appreciated!

    Hi,
    The fields that are given for each segment have their length given in EDSAPPL table. How you have to map is explained in below example.
    Suppose for segment1, EDSAPPL has 3 fields so below are entries
    SEGMENT          FIELDNAME           LENGTH
    SEGMENT1         FIELD1                   4
    SEGMENT1         FIELD2                   2
    SEGMENT1         FIELD3                   2
    Data in EDID4 would be as follows
    IDOC           SEGMENT                          APPLICATION DATA
    12345         SEGMENT1                        XYZ R Y
    When you are extracting data from these tables into your internal table, mapping has to be as follows:
    FIELD1 = APPLICATIONDATA+0(4)        to read first 4 characters of this field, because the first 4 characters in this field would belong to FIELD1
    Similarly,
    FIELD2 = APPLICATIONDATA+4(2).
    FIELD3 = APPLICATIONDATA+6(2).  
    FIELD1 would have XYZ, FIELD2 = R, FIELD3 = Y
    This would remain true in all cases. So all you need to do is identify which fields you want to extract, and simply code as above to extract the data from this table.
    Hope this was helpful in explaining how to derive the data.

  • How to extract data from oracle database directly in to bi7.0 (net weaver)

    how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
    Thanks
    York

    You can use UDConnect to get from Oracle database in to BW
    <b>Data Transfer with UD Connect -</b>
    http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
    <b>Prerequisites</b>
    You have installed the SAP WAS J2EE Engine with BI Java components.  You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
    Hope it Helps
    Chetan
    @CP..

  • How to Extract  data from a transaction..

    Hi All
    There are some transactions and report programs which are used daily to produce some results and the requirement is to extract that data into BW
    so how can we extract information from a transactions and programs
    Any help will be really appreciated and ofcourse rewarded ...
    Regards
    Lisa

    You can use the following methods
    Method 1:
    1> Create another ABAP program with logic to calculate all the fields, but instead of writing the result data to screenm, it should store it in a internal table and pass it to the extract structure.
    2>Create a InfoSet query based on your ABAP program and use that InfoSet
    3> Create a DataSource based on this InfoSet query and extract data from the DS to you ODS/Cube
    In this method there is no Intermediate storage used.
    Method 2:
    1> Modify the report/transaction program to store the required data into a Transparent Table (u can create one from SE11) in addition to displaying on the screen.
    2> Create a View on this transparent table (from SE11)
    3> Create a DataSource on that view and extract data from that into your ODS/Cube.
    Here, the required data is stored in the Table in addition to the DataTarget.
    But, to implement either of these solution, you will need a decent ABAP knowledge. Else, it will give you a tough time!
    Good luck!
    Regards,
    Sree

  • How to export data from a spread sheet which has multiple work sheets?

    How to export data from a spread sheet which has multiple work sheets to a single text file with fixed length fields?

    Hello s1,
    saving them as CSV will not give a fixed legth output but, as the naming says, a Character Separated Value file.
    Regards
    Marcus

  • JDBC-XI-FILE scenario. How to extract data from more than one table in JDBC

    Hi,
    I was asked a question like in JDBC-XI-FILE scenario........ How to extract data from more than one tables (i.e from JDBC system) ?? What is the logic to do the same ??
    I am not sure whether this is a valid question..........but any help in this regards is highly appreciated.
    Regards
    Kumar

    HI,
    Yes it can be possible ,please see the following links
    JDBC  Receiver with Oracle Stored Procedures
    configuring jdbc adapter with multiple tables
    RFC -> XI -> JDBC Scenario Updating Multiple Tables
    /people/alessandro.berta/blog/2005/10/04/save-time-with-generalized-jdbc-datatypes
    JDBC Adapter multiple Selects
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=jdbc%20with%20multiple%20tables&cat=sdn_all
    Regards
    Chilla..

Maybe you are looking for

  • Lenovo System Update 5 does not work on my B580

    Hello, the Lenovo System Update 5 program does not work on my B580 laptop. After 16% of the status bar the program says "there are no packages for your PC". That can't be true, because i haven't installed all drivers and programs. I got .NET Framewor

  • My SLD is configured in SOLMAN sys, How can I connect it with SAP PI system

    Dear Friends        My Basis has configured SLD in Solman, Now I cant use SXMB_IFR tcode in my PI that suggest me some error. saying "error in connection cant read secure connection config" or something like that.  Plus SLDCHECK tcode is also not hap

  • Is it possible to do portal content transports through System landscape?

    Hello, In order to transport content from portal A to portal B I am currently using transport packages: export the content from portal A, download it to the local PC and import it to portal B. The process is working OK but I still have a question: SA

  • Search files in current folder doesn't work

    When I search my whole mac for e.g. "Danse Macabre" i get the results from all over the place, which is to be expected. So when I go into the folder I get a list of files including the one I was searching for. So far so good. While typing in a new se

  • Magic mouse is not allowing me to use all the features

    I just got this mouse and the computer yesterday 02/18/10. I'm unable to scroll from left to right nor the other feature I thought I should be doing with the mouse. I'm new to macs so all this is a little confusing. Do I have the correct software tha