How to fetch data from single database table using 2 internal tables.

Hi friends,
i am a new user of ABAP and also SDN.
i need a help.
i want to fetch data from one database table based on primary keys of 2 internal tables. how to put in where clause.
Thanks in advance.

hii
refer to following code ..i hope it will help you
SELECT matnr                         " Material Number
    FROM mara
    INTO TABLE i_mara
   WHERE matnr IN s_matnr.
IF i_mara[] IS NOT INITIAL.
    SELECT matnr                       " Material Number
           werks                       " Plants
           prctr                       " Profit Center
      FROM marc
      INTO TABLE i_marc
       FOR ALL ENTRIES IN i_mara
     WHERE matnr = i_mara-matnr
       AND werks IN s_werks.
ENDIF.                               " IF i_mara[] IS NOT INITIAL
i_output = i_marc.
IF i_marc[] IS NOT INITIAL.
    SELECT matnr                       " Material Number
           werks                       " Plants
           lgort                       " Storage Location
      FROM mard
      INTO TABLE i_mard
       FOR ALL ENTRIES IN i_marc
     WHERE matnr EQ i_marc-matnr
       AND werks EQ i_marc-werks
       AND lgort IN s_lgort.
ENDIF.                               " IF i_mara[] IS NOT INITIAL
regards
twinkal

Similar Messages

How to fetch data from bseg based on 2 internal tables in 1 select query?

hi,
i have bukrs and belnr in one internal table and bukrs and vbeln in another internal table..now if i select from bseg twice using for all entries for fields bukrs vbeln and bukrs belnr twice in 2 select statements its fine..but since bseg is a huge table i want to use select only once..but the problem is that none of the belnrs in the one internal table will have vbeln in another internal table....ie if vbeln is selected from bseg based on belnr in 1 internal table non eof those vbeln will be equal to vbeln on another internal tables..in this scenario even if i take all data from two internal tables into 1 single internal table and then use for all entries on vbeln and belnr of that table ..but i think this will not work because and AND operator will not work because no record will satisfy both vbeln and belnr conditions..even if i use OR operator if the 1st condition satisfies the select clause will not enter into the second clause and all the records will not be fetched...Please help how should i tackle this..

Hi vijaya,
no simple select statement solution so far.
As BSEG is a huge table you should try to get the full key values into another internal table first.
SAP avoids direct selections from BSEG.
Pleas consider the use of one of the secondary index tables first:
      BSAD : Accounting: Secondary Index for Customers (Cleared Items)
      BSAK : Accounting: Secondary Index for Vendors (Cleared Items)
      BSAS : Accounting: Secondary Index for G/L Accounts (Cleared Item
      BSEC : One-Time Account Data Document Segment
      BSEG : Accounting Document Segment
      BSID : Accounting: Secondary Index for Customers
      BSIK : Accounting: Secondary Index for Vendors
      BSIS : Accounting: Secondary Index for G/L Accounts
you may include
      BKPF : Accounting Document Header
for restrictions about time and document type.
The last step is a FOR ALL ENTRIES selection from BSEG providing the full key values.
Although you may have even more selects, the overall performance will be much better.
Regards,
Clemens

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

How to Copy data from field symbol to Dynamic Internal Table

Hi,
I want to copy the data between two dynamic Internal tables . Following is the code were I have data in the field symbol wanted to transfer it to the other Internal table :
REPORT ztest.
DATA:
       gd_dref          TYPE REF TO data,
       gd_dref1          TYPE REF TO data.
FIELD-SYMBOLS: <fs1>   TYPE any,
                           <fs_wa> TYPE any,
                            <field>    TYPE any,
                            <fs_wa1> TYPE ANY TABLE. * Contains data from p_src
*Copy data from p_src to p_dest*
PARAMETERS: p_src LIKE dd02l-tabname .    * Name of Dynamic Internal table *
                         p_dest LIKE dd02l-tabname . * Name of Dynamic Internal table*
*DATA : lt_csks LIKE p_dest WITH HEADER LINE.
START-OF-SELECTION.
CREATE DATA gd_dref TYPE (p_src).
CREATE DATA gd_dref1 TYPE TABLE OF (p_src).
   ASSIGN gd_dref->* TO <fs_wa>.
   ASSIGN gd_dref1->* TO <fs_wa1>.
   SELECT * FROM (p_src) INTO TABLE <fs_wa1>.
*Write out data from FIELD SYMBOLS TO Table.
   loop at <fs_wa1> into <fs_wa>.
     do.
       assign component sy-index
          of structure <fs_wa> to <field>.
       if sy-subrc <> 0.
       exit.
       endif.
       if sy-index = 1.
         write:/ <field>.
       else.
       write: / <field>.
       endif.
     enddo.
   endloop.
*Need Logic To Copy the Data to p_dest table from <fs_wa1>.
*p_dest is a table having a similar structure to table p_src .
*Need Logic To Copy the Data to p_dest table from <fs_wa1>.
EXIT.
Thanks in Advance.

try this...
I have extended your source code and just used vbak/vbap as an example as they have some common fields like vbeln/erdat etc which corresponds with your requirement of 'similar structure' i.e. shared/common fields in both.
Cheers...
report ztest.
data:
gd_dref type ref to data,
gd_dref1 type ref to data,
gd_dref_str type ref to data,
gd_dref_tab type ref to data.
field-symbols:
<fs1> type any,
<fs_wa> type any,
<fs1_dest_str> type any,
<fs_dest_tab> type any table,
<field> type any,
<fs_wa1> type any table.
* contains data from p_src
*Copy data from p_src to p_dest*
parameters: p_src like dd02l-tabname default 'vbak',
* name of dynamic internal table *
            p_dest like dd02l-tabname default 'vbap'.
* name of dynamic internal table*
*data : lt_csks like p_dest with header line.
start-of-selection.
create data gd_dref type (p_src).
create data gd_dref1 type table of (p_src).
assign gd_dref->* to <fs_wa>.
assign gd_dref1->* to <fs_wa1>.
select * from (p_src) into corresponding fields of table <fs_wa1>
up to 3 rows
where vbeln ne space.
create data gd_dref_str type (p_dest).
create data gd_dref_tab type standard table of (p_dest).
assign gd_dref_str->* to <fs1_dest_str>.
assign gd_dref_tab->* to <fs_dest_tab>.
*write out data from field symbols to table.
loop at <fs_wa1> into <fs_wa>.
    " break-point here - can see vbeln/waers/create date/ etc move over to new structure
    " the 'common' fields of your structures - the same will happen. if they not the same name you will have to do an
    " explicit move i.e. if fieldname = xyz ....move fieldxyz to new field123....after the move-corre
    break-point.
    move-corresponding <fs_wa> to <fs1_dest_str>.
    insert <fs1_dest_str> into table <fs_dest_tab>.
**    do.
**      assign component sy-index
**         of structure <fs_wa> to <field>.
**      if sy-subrc <> 0.
**        exit.
**      endif.
**      if sy-index = 1.
**        write:/ <field>.
**      else.
**        write: / <field>.
**      endif.
**    enddo.
endloop.
" write out some dest data from the dest table build from previous loop
loop at <fs_dest_tab> assigning <fs1_dest_str>.
    do.
      assign component sy-index of structure <fs_wa> to <field>.
      if sy-subrc <> 0.
        exit.
      endif.
      if sy-index = 1.
        write:/ <field>.
      else.
        write: / <field>.
      endif.
    enddo.
endloop.

How to retrive data from the database by using resultset metadata

Hi
I am very new to java programing.please help me anyone...
In my table 20 fields are there.I want to retrive those fields and put it into arraylist.and return the arraylist.
regards
guru

First get Column count by using getColumnCount() method
Then Get The Column name by using getColumnName(int column)
By using column name You can retrieve values
eg:
String columeName=null;
int count = mymetadata.getColumnCount();
for(int i=1;i<=count;i++) {
columeName = getColumnName(i);
//Retrive values from resultset buy using columeName
}

How to delete data from single field in a database table?

Hi guys,
Plz suggest me How to delete data from single field in a database table?
thnks,
pavan

hi
in addition to abv details..chk this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb3aef358411d1829f0000e829fbfe/content.htm
http://dev.mysql.com/doc/maxdb/en/34/ee7fbd293911d3a97d00a0c9449261/content.htm
regards,
madhu

To fetch Data from multiple database tables!

How to fetch Data from fields of multiple database tables!
Give me one example!

use <b>join....</b>
c the SAPHELP docs...
FROM tabref1 [INNER] JOIN tabref2 ON cond
Effect
The data is to be selected from transparent database tables and/or views determined by tabref1 and tabref2. tabref1 and tabref2 each have the same form as in variant 1 or are themselves Join expressions. The keyword INNER does not have to be specified. The database tables or views determined by tabref1 and tabref2 must be recognized by the ABAP Dictionary.
In a relational data structure, it is quite normal for data that belongs together to be split up across several tables to help the process of standardization (see relational databases). To regroup this information into a database query, you can link tables using the join command. This formulates conditions for the columns in the tables involved. The inner join contains all combinations of lines from the database table determined by tabref1 with lines from the table determined by tabref2, whose values together meet the logical condition (join condition) specified using ON>cond.
Inner join between table 1 and table 2, where column D in both tables in the join condition is set the same:
Table 1                      Table 2
A
B
C
D
D
E
F
G
H
a1
b1
c1
1
1
e1
f1
g1
h1
a2
b2
c2
1
3
e2
f2
g2
h2
a3
b3
c3
2
4
e3
f3
g3
h3
a4
b4
c4
3
|--|||--|
    Inner Join
    |--||||||||--|
    | A | B | C | D | D | E | F | G | H |
    |--||||||||--|
    | a1 | b1 | c1 | 1 | 1 | e1 | f1 | g1 | h1 |
    | a2 | b2 | c2 | 1 | 1 | e1 | f1 | g1 | h1 |
    | a4 | b4 | c4 | 3 | 3 | e2 | f2 | g2 | h2 |
    |--||||||||--|
Example
Output a list of all flights from Frankfurt to New York between September 10th and 20th, 2001 that are not sold out:
DATA: DATE   LIKE SFLIGHT-FLDATE,
      CARRID LIKE SFLIGHT-CARRID,
      CONNID LIKE SFLIGHT-CONNID.
SELECT FCARRID FCONNID F~FLDATE
    INTO (CARRID, CONNID, DATE)
    FROM SFLIGHT AS F INNER JOIN SPFLI AS P
           ON FCARRID = PCARRID AND
              FCONNID = PCONNID
    WHERE P~CITYFROM = 'FRANKFURT'
      AND P~CITYTO   = 'NEW YORK'
      AND F~FLDATE BETWEEN '20010910' AND '20010920'
      AND FSEATSOCC < FSEATSMAX.
WRITE: / DATE, CARRID, CONNID.
ENDSELECT.
If there are columns with the same name in both tables, you must distinguish between them by prefixing the field descriptor with the table name or a table alias.

Fetch data from different database tables

Hi...
How can i fetch data from different database tables and put it into a internal table and then display it??? Can provide simple short codes as i'm new to ABAP. Thanks.

Hi,
Check this sample code..
TYPE-POOLS: slis.
DATA: BEGIN OF itab OCCURS 0,
        vbeln TYPE vbeln,
        expand,
      END OF itab.
DATA: BEGIN OF itab1 OCCURS 0,
        vbeln TYPE vbeln,
        posnr TYPE posnr,
        matnr TYPE matnr,
        netpr TYPE netpr,
      END OF itab1.
DATA: t_fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-outputlen = '12'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'POSNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'POSNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'MATNR'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'NETPR'.
s_fieldcatalog-do_sum    = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog.
CLEAR: s_fieldcatalog.
DATA: s_layout TYPE slis_layout_alv.
s_layout-subtotals_text            = 'SUBTOTAL TEXT'.
s_layout-key_hotspot = 'X'.
s_layout-expand_fieldname = 'EXPAND'.
SELECT vbeln UP TO 100 ROWS
       FROM
       vbak
       INTO TABLE itab.
IF NOT itab[] IS INITIAL.
SELECT vbeln posnr matnr netpr
         FROM vbap
         INTO TABLE itab1
         FOR ALL ENTRIES IN itab
         WHERE vbeln = itab-vbeln.
ENDIF.
DATA: v_repid TYPE syrepid.
v_repid = sy-repid.
DATA: s_keyinfo TYPE slis_keyinfo_alv.
s_keyinfo-header01 = 'VBELN'.
s_keyinfo-item01   = 'VBELN'.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
     EXPORTING
          i_callback_program = v_repid
          is_layout          = s_layout
          it_fieldcat        = t_fieldcatalog
          i_tabname_header   = 'ITAB'
          i_tabname_item     = 'ITAB1'
          is_keyinfo         = s_keyinfo
     TABLES
          t_outtab_header    = itab
          t_outtab_item      = itab1
     EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Naren

How to fetch data from Database using SUP MBOs

I'm learning to develop blackberry apps using SUP.I am new to both blackberry api and SUP.
I need to make a login page for a Student and then validate the username and password entered using data from a database.
I need to check the database for the username and password entered. What should be my next step? How do i get this data from the database. Using findAll() method is not working . Do i need to connect to SCC or unwired server first. If yes , then someone please provide a sample code for it.

Hi!, I see your code and I see that you have a fee errors, try to use this:
import java.text.*;
import java.sql.*;
import java.util.*;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.OutputStream;
* NOTE: You must put the try-catch and your sql code into the get method
/** Servlet program to take fetchdata from database and display that on the broswer*/
public class Fetchdata
    extends HttpServlet {
String query = new String();
String uid = "ashvini";
String pwd = "******";
public void doGet(HttpServletRequest request, HttpServletResponse response) throws
      ServletException, Exception {
    try {
      Connection con = null;
      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
      String url = "jdbc:odbc:Testing";
      con = DriverManager.getConnection(url, uid, pwd);
      Statement s = con.createStatement();
      query = "select * from gowri.msllst1";
      ResultSet rs = s.executeQuery(query);
      response.setContentType("text/html");
      ServletOutputStream out = response.getOutputStream();
      out.println("<HTML>" + "<BODY BGCOLOR=\"#FDF5E6\">\n" +
                  "<H1 ALIGN=CENTER>" + title + "</H1>\n" +
                  "<table>" + " <th>ITEM Code</th>");
      while (rs.next()) {
        out.println("<tr><td>" + rs.getString(1).trim() + "</td></tr>");//I change </tr></td> for </td></tr>
      } //end of while
      out.println("</table></BODY></HTML>");
    catch (Exception e) {
      System.out.println(e);
} //end of doGet method
}I hope this help you :)

How to fetch data from PTREQ tables

I need to display data in the customised webdynpro application from PTREQ tables.
Can anyone help me out how to fetch data from these tables.

use the standard modules like
PT_ARQ_REQUEST_CHECK
PT_ARQ_REQUEST_EXECUTE
PT_ARQ_REQUEST_PREPARE

How to fetch data from cluster tables

hi
i need to know how to fetch data from cluster tables please update me if any
i know that we cannot use joins in cluster table we use view etc
but i need detailed inforation on methods for fetching data from cluster tables
regards
Nishant

Hi,
Check the following links
http://fuller.mit.edu/hr/cluster_tables.html
The specified item was not found.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33

FETCH DATA FROM ORACLE DATABASE USING Web Dynpro

I want to fetch data from ORACLE database using Web Dynpro.How can I do this?

1) Are you sure that you get no results? It sounds like you are having name resolution issues, which would imply that you should be getting an ORA-00942 error indicating that the table doesn't exist (or that you don't have access to the table). If you are not seeing this error, I would tend to suspect an overzealous exception handler.
2) What database account owns the table? What database account is your ASP.Net application using to connect? Assuming these two accounts are different, your application would either have to
- Explicitly prefix the table name with the schema name
- Have a public or private synonym that maps the table name to the fully qualified identifier schema_name.table_name
- Issue the command ALTER SESSION SET CURRENT_SCHEMA = <<schema name>> in each session, in which case all queries in the session would use the specified schema name as the default if no schema name is prefixed.
Justin

How to fetch data from Mysql with SSL.

I am using jdk1.5 and mysql 5.0.
How to fetch data from Mysql with SSL
I am using url = jdbc:mysql://localhost/database?useSSL=true&requireSSL=true.
It shows error. how to fetch

I have created certificate in mysql and checked in mysql.
mysql>\s
SSL: Cipher in use is DHE-RSA-AES256-SHA
but through ssl how to fetch data in java.

How to read data from a CLUSTER STRUCTURE not cluster table.

Hi,
how to read data from a CLUSTER STRUCTURE not cluster table.
regards,
Usha.

Hello,
A structre doesnt contain data.. so u cannot read from it. U need to find out table of that structure and read data from it.
Regards,
Mansi.

How to extract data from oracle database directly in to bi7.0 (net weaver)

how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
Thanks
York

You can use UDConnect to get from Oracle database in to BW
<b>Data Transfer with UD Connect -</b>
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
<b>Prerequisites</b>
You have installed the SAP WAS J2EE Engine with BI Java components. You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
Hope it Helps
Chetan
@CP..

How to fetch data from single database table using 2 internal tables.

Similar Messages

Maybe you are looking for