How to fetch the SAP Standard Prog. built internal table into my_z_prog.?

Hi Experts,
Pls. let me know that,
How to fetch the SAP Standard Prog. built internal table into my_z_prog.?
For more explannation, pls. see my other thread with name of yestrday,
SUBMIT RFGLBALANCE WITH selection criteria, then How to get resulted itab?
thanq

Hi
Suppose RFGLBALANCE is your standard program and you have an internal table named I_RFGLBALANCE.
And lets say your Z program name is Z_SRINIVAS.
First find out the type of the internal table you want in your Z-program in the standard program. And declare an internal table of similar type in your Z-program.
I hope you can do this much.
Later wherever you are putting the below mentioned code.
SUBMIT RFGLBALANCE WITH selection criteria
Write the code which i have written.Obviously modify it to suit your requirement.
Please show what is not working fine so that even anyone else can help you with the problem you are facing.
Regards,
Mayank

Similar Messages

How to fetch the data from query to internal table ?

Dear all ,
I would like to fetch the query data(sq01) into my internal table ? is it possible to do that ?
Best Regards,
Carlos

Hi
Try this RRW3_GET_QUERY_VIEW_DATA
Also, you can have a look at this...
<a href="/people/durairaj.athavanraja/blog/2005/04/03/execute-bw-query-using-abap-part-ii Query results into Internal table</a>
Regards
Raj

How to fetch the perticular line of a internal Table

Hi Friends,
I am using Function Module VC_I_GET_CONFIGURATION and I am passing the instance Number.
Now i am getting 18 records in my ITAB.Here from this ITAB i need only ATBEZ = RELAY TYPES & ATBEZ = CASE Records.Only for the mentioned conditions i require the records.
How Can i Proceed.Plz suggest.As CASE is the reserved word and Types also reserved Word.
Plz suggest.

Hi,
Thanks for ur Reply and Can i Use Read statement for the same. My requirement is ATBEZ = 'RELAY TYPES' AND 'CASE'.
While Printing in smart form for one item there will be only one Relay type.How can i proceed.
If i write LOOP AT ITAB WHERE ATBEZ = 'RELAY TYPES' or ATBEZ = ' CASE'.
2 records r coming and only the secong recored is appending.First Record will not append.
How can i do.
Plz suggest.

How to get the field name of an internal table during runtime?

How to get the field name of an internal table during runtime?

Hi Sudhir,
Declare and Use Get Cursor Field in Your Prm to get the field Name of the Intenal Table
Example Code:
 DATA: v_field(60). " Insert this code.
 GET CURSOR FIELD v_field. " Insert this code.
 CHECK v_field = 'ITAB-KUNNR'. " Insert this code. (or)
Write: v_field.
Regards,
Ramganesan K.

How to find the SAP Standard form given the variant name.

I am working on forms, How to find the standard form given
print program name or the variant name .
for eg:
given
print program is RKFORD10
varinat is SAP06
The SAP standard Form is F140_ACC_STAT_01.
I need to find the standard form given the variant as SAP13.

In SPRO,
SAP Customizing Imp guide->Financial Accounting->Fin Account Global Settings->Correspondence
Under this-
'Assign Programs for Correspondence Types'(Tcode OB78) &
'Define Form names for correspondence print'
should be useful to you
Message was edited by: Sravanthi

How to Enhance the SAP standard WebService XMLA or others

Now we will show the SAP BW data for other application, we apply the SAP standard WebService XMLA to retrieve the BW Cube or ODS data for external system, but the authorization for data scope is a question, I didn't know how to pass the logon user name and password to the BW system, the SAP standard WebService XMLA did not provide the paramters for input these variants. So I want to enhance this webservice but didn't know how to do it, if anyone know this please tell me, thank you very much!

Hi,
When you try to access url of webservice it will prompt for user/password. .Net and Java have provision to supply user/password to webservice.
Regards,
Gourav

How to fetch the Business area field value from MIRo into report

Hi,
I want to create a report for MIRO with payment details.
How to fetch the business area field value in to report.
What is the table name. I verified it is storing in structure. Which is the right table for fetching that value with reference to MIRO.
After that, how to find the accounting document for payment and check details.
What are the table names and field names. What we can get from PAYR table.
With regards
Lakki

Dear,
For Bussiness area
RKPF-GSBER

How to change the SAP Standard DCs

Hi Experts,
I have to change the particular ESS Address view like enable and disable the property.SAP enable & disable the fields dynmically in DCs.How can I change the SAP standred DC?....
Please advice me........,
Thanks.

Hi,
To customize any Business package DC's, you need to configure NWDI, deploy your BP, get the configuration to your local NWDS, then import the DC's to your local NWDS, make changes and then save.
here is the solved thread for the same Re: Customize/Change ESS MSS WebDynpro Applications (ECC 5.0)
here is a good blog on the same ESS/MSS Customization Make it Simple
PradeeP

How to fetch the latest change number from CDPOS Table..?

Hi All,
im trying to fetch teh change number from CDPOS with the below select, but my requirement is always i wants to fetch the latest change number.
          SELECT SINGLE objectid changenr FROM cdpos
                 INTO wa_cdpos
                 WHERE objectid = wa_e1kna1m-kunnr
                 AND ( tabname = 'KNA1' OR tabname = 'KNVV')
                 AND   fname = 'AUFSD'
                 AND ( value_new = '01' OR value_new = space ).
Please let me know how to achive this..?
Ashok

try this way
"           SELECT SINGLE objectid changenr FROM cdpos
"                 INTO wa_cdpos
           SELECT objectid changenr FROM cdpos
                  INTO table t_cdpos
                  WHERE objectid = wa_e1kna1m-kunnr
                  AND ( tabname = 'KNA1' OR tabname = 'KNVV')
                  AND   fname = 'AUFSD'
                  AND ( value_new = '01' OR value_new = space ).
SORT t_cdpos by changenr Descending.
read t_cdos index 1.    "this is the latest change
Prabhudas

How to fetch the data from a pl/sql table and varray, with some example

I want to fetch the data using a cursor from Pl/sql table and varry and I want to update the data.
Please provide me some example.

PL/SQL Table - please note that, right term is Associative Array.
Presumably you are referring to the 'often heated' back-and-forth that sometimes goes on in the forums when people refer to ANY PL/SQL type using a term with the word 'table' in it?
Curious that you then show an example of a nested table!
type emp_tab is table of employees%rowtype;
The 'right term' for that is 'nested table'. The following would be an 'associative array' or 'index-by table'
type emp_tab is table of employees%rowtype INDEX BY PLS_INTEGER;
Those used to be called 'PL/SQL tables' or 'index-by tables' but 'associative array' is the current term used.
Associative Arrays
An associative array (formerly called PL/SQL table or index-by table) is a set of key-value pairs. Each key is a unique index, used to locate the associated value with the syntax variable_name(index).
The data type of index can be either a string type or PLS_INTEGER.
Since the Oracle docs often use 'PL/SQL table' or 'index-by table' it isn't unusual for someone asking a question to use those terms also. Technically the types may not be 'tables' but it's clear what they mean when they use the term.
In PL/SQL the term 'nested table' is still used even though the PL/SQL collection is not really a table. SQL does have nested tables where the data is actually stored in a table. The PL/SQL 'nested table' type can be used as the source/destination of the SQL data from a nested table so that may be why Oracle uses that term for the PL/SQL type.
The doc that SKP referenced refers to this use:
Nested Tables
In the database, a nested table is a column type that stores an unspecified number of rows in no particular order. When you retrieve a nested table value from the database into a PL/SQL nested table variable, PL/SQL gives the rows consecutive indexes, starting at 1.

How to delete the matching records from two internal tables

Hi ,
I have two internal tables say A and B of the same type. If A has 10 records and B has 4 records , I want to delete the 4 records in B from A .
loop at B into wa .
delete A where key = wa - key .
endloop.
takes a long time if the table B is huge. how can I improve the performance.
Thanks.
Gayathri

Hi Gayathri,
You could try field-symbols. It reduces the data transfer from the internal table B to the work area.
field-symbols <fs_itab_b> like line of B.
loop at B assigning <fs_itab_b>.
delete A where key = <fs_itab_b>?-key.
endloop.
Regards,
<a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=zwcc%2fwm4ups%3d">anand Mandalika</a>.

Debugging ECC6: how to see the fields name when download internal table?

When we debug a reprot in ECC6 and save to a local file an internal table, the fields are not appearing only the data,
Is there a way to download also the table fields name?

From the new debugger switch to the classic debugger using menu path Debugger->Switch to Classic Debugger. Form the classic debugger you can download internal table data with column name(s).
Regards,
Joy.

How to fnd SAP STANDARD program of Database table

Hi to all,
Please can anybody tell me , how to find out SAP standard program of database Tables S070 (Breakdown Statistics).
As this table contain two filelds Time To Repair and Time Between Repair , i want to knew how the standard program for the table have calculate them.
i shall be thankfull to you for this.
Regards
Pavneet Rana

Hi,
Program for table is generated dynamically for each user ID, when ever you change the selection screen in SE16 or when you are executing the table entries for first time. Usually it starts with /1BCDWB/DB followed by table name. In your case it would be /1BCDWB/DBS070.
Go to Se16, enter your table name and click enter. Once you are in selection screen, goto Menu=>system=>Status. Here you can see the program name.
Thanks,
Vinod.

Creation of Sorted and Standard and Hashed Internal Tables ..

Hi ..
Pls specify me.. how to create .. sorted ,Standard and Hashed Internal Tables...
pls give me the full code regarding ...this ..
Thnks

Standard tables
This is the most appropriate type if you are going to address the individual table entries using the index. Index access is the quickest possible access. You should fill a standard table by appending lines (ABAP APPEND statement), and read, modify and delete entries by specifying the index (INDEX option with the relevant ABAP command). The access time for a standard table increases in a linear relationship with the number of table entries. If you need key access, standard tables are particularly useful if you can fill and process the table in separate steps. For example, you could fill the table by appending entries, and then sort it. If you use the binary search option with key access, the response time is logarithmically proportional to the number of table entries.
Sorted tables
This is the most appropriate type if you need a table which is sorted as you fill it. You fill sorted tables using the INSERT statement. Entries are inserted according to the sort sequence defined through the table key. Any illegal entries are recognized as soon as you try to add them to the table. The response time for key access is logarithmically proportional to the number of table entries, since the system always uses a binary search. Sorted tables are particularly useful for partially sequential processing in a LOOP if you specify the beginning of the table key in the WHERE condition.
Hashed tables
This is the most appropriate type for any table where the main operation is key access. You cannot access a hashed table using its index. The response time for key access remains constant, regardless of the number of table entries. Like database tables, hashed tables always have a unique key. Hashed tables are useful if you want to construct and use an internal table which resembles a database table or for processing large amounts of data.
Special Features of Standard Tables
Unlike sorted tables, hashed tables, and key access to internal tables, which were only introduced in Release 4.0, standard tables already existed several releases previously. Defining a line type, table type, and tables without a header line have only been possible since Release 3.0. For this reason, there are certain features of standard tables that still exist for compatibility reasons.
Standard Tables Before Release 3.0
Before Release 3.0, internal tables all had header lines and a flat-structured line type. There were no independent table types. You could only create a table object using the OCCURS addition in the DATA statement, followed by a declaration of a flat structure:
DATA: BEGIN OF <itab> OCCURS <n>,
<fi> ...
END OF <itab>.
This statement declared an internal table <itab> with the line type defined following the OCCURS addition. Furthermore, all internal tables had header lines.
The number <n> in the OCCURS addition had the same meaning as in the INITIAL SIZE addition from Release 4.0. Entering 0 had the same effect as omitting the INITIAL SIZE addition. In this case, the initial size of the table is determined by the system.
The above statement is still possible in Release 4.0, and has roughly the same function as the following statements:
TYPES: BEGIN OF <itab>,
<fi> ...,
END OF <itab>.
DATA <itab> TYPE STANDARD TABLE OF <itab>
WITH NON-UNIQUE DEFAULT KEY
INITIAL SIZE <n>
WITH HEADER LINE.
In the original statement, no independent data type <itab> is created. Instead, the line type only exists as an attribute of the data object <itab>.
Standard Tables From Release 3.0
Since Release 3.0, it has been possible to create table types using
TYPES <t> TYPE|LIKE <linetype> OCCURS <n>.
and table objects using
DATA <itab> TYPE|LIKE <linetype> OCCURS <n> WITH HEADER LINE.
The effect of the OCCURS addition is to construct a standard table with the data type <linetype>. The line type can be any data type. The number <n> in the OCCURS addition has the same meaning as before Release 3.0. Before Release 4.0, the key of an internal table was always the default key, that is, all non-numeric fields that were not themselves internal tables.
The above statements are still possible in Release 4.0, and have the same function as the following statements:
TYPES|DATA <itab> TYPE|LIKE STANDARD TABLE OF <linetype>
WITH NON-UNIQUE DEFAULT KEY
INITIAL SIZE <n>
WITH HEADER LINE.
They can also be replaced by the following statements:
Standard Tables From Release 4.0
When you create a standard table, you can use the following forms of the TYPES and DATA statements. The addition INITIAL SIZE is also possible in all of the statements. The addition WITH HEADER LINE is possible in the DATA statement.
Standard Table Types
Generic Standard Table Type:
TYPES <itab> TYPE|LIKE STANDARD TABLE OF <linetype>.
The table key is not defined.
Fully-Specified Standard Table Type:
TYPES <itab> TYPE|LIKE STANDARD TABLE OF <linetype>
WITH NON-UNIQUE <key>.
The key of a fully-specified standard table is always non-unique.
Standard Table Objects
Short Forms of the DATA Statement :
DATA <itab> TYPE|LIKE STANDARD TABLE OF <linetype>.
DATA <itab> TYPE|LIKE STANDARD TABLE OF <linetype>
WITH DEFAULT KEY.
Both of these DATA statements are automatically completed by the system as follows:
DATA <itab> TYPE|LIKE STANDARD TABLE OF <linetype>
WITH NON-UNIQUE DEFAULT KEY.
The purpose of the shortened forms of the DATA statement is to keep the declaration of standard tables, which are compatible with internal tables from previous releases, as simple as possible. When you declare a standard table with reference to the above type, the system automatically adopts the default key as the table key.
Fully-Specified Standard Tables:
DATA <itab> TYPE|LIKE STANDARD TABLE OF <linetype>
WITH NON-UNIQUE <key>.
The key of a standard table is always non-unique.
Internal table objects
Internal tables are dynamic variable data objects. Like all variables, you declare them using the DATA statement. You can also declare static internal tables in procedures using the STATICS statement, and static internal tables in classes using the CLASS-DATA statement. This description is restricted to the DATA statement. However, it applies equally to the STATICS and CLASS-DATA statements.
Reference to Declared Internal Table Types
Like all other data objects, you can declare internal table objects using the LIKE or TYPE addition of the DATA statement.
DATA <itab> TYPE <type>|LIKE <obj> WITH HEADER LINE.
Here, the LIKE addition refers to an existing table object in the same program. The TYPE addition can refer to an internal type in the program declared using the TYPES statement, or a table type in the ABAP Dictionary.
You must ensure that you only refer to tables that are fully typed. Referring to generic table types (ANY TABLE, INDEX TABLE) or not specifying the key fully is not allowed (for exceptions, refer to Special Features of Standard Tables).
The optional addition WITH HEADER line declares an extra data object with the same name and line type as the internal table. This data object is known as the header line of the internal table. You use it as a work area when working with the internal table (see Using the Header Line as a Work Area). When you use internal tables with header lines, you must remember that the header line and the body of the table have the same name. If you have an internal table with header line and you want to address the body of the table, you must indicate this by placing brackets after the table name (<itab>[]). Otherwise, ABAP interprets the name as the name of the header line and not of the body of the table. You can avoid this potential confusion by using internal tables without header lines. In particular, internal tables nested in structures or other internal tables must not have a header line, since this can lead to ambiguous expressions.
TYPES VECTOR TYPE SORTED TABLE OF I WITH UNIQUE KEY TABLE LINE.
DATA: ITAB TYPE VECTOR,
JTAB LIKE ITAB WITH HEADER LINE.
MOVE ITAB TO JTAB. <- Syntax error!
MOVE ITAB TO JTAB[].
The table object ITAB is created with reference to the table type VECTOR. The table object JTAB has the same data type as ITAB. JTAB also has a header line. In the first MOVE statement, JTAB addresses the header line. Since this has the data type I, and the table type of ITAB cannot be converted into an elementary type, the MOVE statement causes a syntax error. The second MOVE statement is correct, since both operands are table objects.
plz reward if useful

How to add custom fields to the sap standard program ukm_bp_display

How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?

Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
       partner LIKE but000-partner,
       credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
        INCLUDE STRUCTURE ukm_s_account.
        INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA:   credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
      Gruppe Vector
        INCLUDE STRUCTURE ukm_s_bp_vector.
      Gruppe OBL = Obligo
      include structure UKM_S_BP_CMS_MALUSDSP_OUT.
        INCLUDE STRUCTURE ukm_s_display_segment.
        INCLUDE STRUCTURE ukm_s_bp_cms.
        INCLUDE STRUCTURE bus000_dat.
*DATA:   icon(4).
      Gruppe RAST (Raster)
DATA:
         rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
         rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA:    rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas

How to fetch the SAP Standard Prog. built internal table into my_z_prog.?

Similar Messages

Maybe you are looking for