How to fill the "budget" in an initiative in SEM BSC

Good Afternoon for all!
We have a Balanced Scorecard implemented in SAP SEM BSC, using SAP BW.
Our Balanced Scorecard actually manages ratios, objectives, perspectives, strategy and scorecard.
Now, we are trying to use "iniatiatives" and we have using the SEM BSC wizard, through the web interface.
When defining the initiative everything goes ok, we define the initiative , and then we assign it to an objective.
We have also installed the infocube "0SEM_C02" which we have the understanding that it stores the information concerned to initiatives.
I have also build a SEM BPS layout and planning area for this infocube (0SEM_C02) in order to fill the infocube with information (manually entered).
But after all these, the information does not appear for the "budget" when displaying the Balanced scorecard.
When displaying an initiative it displays:
-Definition
-Duration
-Priority
-Status and score
-Milestones
-Team members
-Objectives
-Budget (<-----E M P T Y !! )
I do not understand, how to fill the "Budget" data for an initiative. Because we have fill all the information regarded to the initiative included above, but the budget is very important for us, and as i said before, we have installed the infocube 0SEM_C02, we also created a planning area for this infocube in BPS, we have created a planning layout for this infocube, and we have entered some values to this infocube.
Is there any special condition or something special to do, in order to fill the budget for an initiative in SAP SEM BSC??
How can we see in the BSC the budget for an initiative, or fill the value???
We will appreciate any help for this issue.
Thanks in advance for your valuable help.
Carlos Espana
Cementos Progreso
Guatemala

Carlos,
This is the Forum for SAP Strategy Management.
There is another Forum specifically for SEM-BSC questions.
Go to the SAP Community Network Forums > SAP Solutions > SEM-BSC
Please repost your question there for an answer.
Regards,
Bob

Similar Messages

  • How to fill the values in List Box?

    Hi Experts,
    Can anyone explain me how to fill the values in the List Box such that the value should be from the table?
    For Example : Fill the EmpID from table T1 into the ListBox?
    Thanks in Advance,
    Regards,
    Raghu

    hi,
    and u doing it through report means from se38 than here is code...
    DATA : BEGIN OF itab OCCURS 0,
            matnr LIKE mara-matnr,
           END OF itab.
    DATA : ok_code LIKE sy-ucomm.
    CALL SCREEN 0200.
    *&      Module  STATUS_0200  OUTPUT
          text
    MODULE status_0200 OUTPUT.
      SET PF-STATUS 'Z200'.
    ENDMODULE.                 " STATUS_0200  OUTPUT
    *&      Module  USER_COMMAND_0200  INPUT
          text
    MODULE user_command_0200 INPUT.
      CASE ok_code.
        WHEN 'BACK' OR 'UP' OR 'CANC'.
          LEAVE PROGRAM.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_0200  INPUT
    *&      Module  mat_val  INPUT
          text
    MODULE mat_val INPUT.
      SELECT matnr FROM mara INTO CORRESPONDING FIELDS OF TABLE itab
        WHERE matnr BETWEEN '000000000000000101' AND '000000000000000109'.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            retfield               = 'MATNR'
           VALUE_ORG              = 'S'
          tables
            value_tab              = itab
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    ENDMODULE.                 " mat_val  INPUT
    <b>And this is flow logic..</b>
    PROCESS BEFORE OUTPUT.
      MODULE status_0200.
    PROCESS AFTER INPUT.
      MODULE user_command_0200.
    PROCESS ON VALUE-REQUEST.
      FIELD itab-matnr MODULE mat_val.

  • How to fill the whole screen of my iMac with the photos included in an iDVD project. (iDVD v. 7.1.2)

    How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
    When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
    Any cure for this ?

    Hi
    In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
    Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
    Bengt W

  • How to fill the gaps in SAP Fico configuration

    Hi Guys,
    Can anyone please explain me that how to fill the gaps in SAP FICO implementation project
    Thanks in advance
    Vasu

    Hello,
    Perhaps you might find some useful info here http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/36/f1a5e16cde4121acc69a91728b9082/frameset.htm
    Regards,
    Paul

  • How to release the budget in SAP Funds Management

    Hi
    How to release the budget in SAP Funds Management. Please let me know the proceedure and the transaction code
    Tks

    Hi,
    The answer depends on if you are using Former Budgeting or BCS.
    1) If you are using Former Budgeting:
    a. You should use transaction FR51 to enter Release or FR55 to distribute it.
    2) If you are using BCS:
    a. Within FMBBC transaction you have the option to release the budget, use document type as REL (release).
    b. You can activate the automatic release for each budget profile in Customizing of Funds Management Government.   To do this, in IMG select Funds Management Government ® Budgeting and Availability Control (Former Budgeting) ® Budget Profiles (Former Budgeting) ® Set Up Budget Profiles.
    With the automatic release, the corresponding background releases for expenditures FM account assignments with budget transfers are also posted. Take note that the maximum amount that this automated release can transfer from the sender is the amount that has already been released.
    If you do not activate the automated release, the maximum amount that can be transferred from the sender is that which has not yet been released.
    c. You can use the mass transaction for release, which is FMMPRELE.
    I hope that this answer your inquiry.
    Best Regards,
    Vanessa Barth.

  • How to fill the master data in ecc

    Hi,
             0product_attr having zero records i ecc,how to fill the master data in ecc can you pls provide me the setps?
    Regrads,
    devi.

    Hi Devi,
    Loading data is ECC is not the part of BI Activities. Contact your functional consultant to load data. 
    BDC and LSMW both are used for loading data into SAP system.
    Or ask even directly they can create in ECC.  If it is for your testing purpose, it is better to ask them to create master in source system .
    Thanks
    BVR

  • How to fill the details tab in tv shows with description

    Can anyone tell how to fill out the details tab metadata in the tv shows section of iPad? The tv shows purchased from the iTunes Store have the details tab beside the episodes tab filled in with helpful description about the show. Isn't there a way to do that manually for personally downloaded tv shows? It's not possible to buy every content from the iTunes Store. Please help if anyone know how to add description to tv show details.

    see your duplicate thread : How to fill the details tab in the iPad tv shows with description

  • How to assign the budget to maintenance order

    Dear PM Guru's,
    I like to know the how to assign the budget for a maintenance order. how we control the expenses from a maintenance order. suppose for a small work manangement assigns budget as 2lacs. now i like to restrict if any thing purchased once budget reached to 2lacs system should populates the error message to restrict the creation of Purchase orders / material requisitions and some other issues. Please suggest me how i can map in SAP? if any one have full documentatioin regard this please send through mail.
    thanks in advance to all of PM Guru's.
    regards
    Jalu

    Hi,
    There are different approaches for budget control in PM orders.
    1) Option1: In koab transaction maintain commitment managemen active and in budget profile (oioa) you must tick total values ,annual values,activation type should be 1-automatic activated when budget allocation done. Then distribute budget in PM order through KO22.
    2) Option2:You can also opt for Investment management approach but it is mainly done in case of capital work/projects/internal orders. In this approach you need to activate IM for orders(done by CO people). Investment programs are created and budget distributed through IM52. For details you may consult your FICO consulatnt.
    3) Option3: Fund Management approach enables you to monitor budget-relevant plant maintenance processes. enables you to monitor budget-relevant plant maintenance processes in FM.
    The link between the plant maintenance process and FM is established by entering an FM account assignment (commitment item, funds center, and fund) when you create a plant maintenance order.
    You have to enter the FM account assignment manually. If, however, you have maintained the assignments of FM account assignments to CO account assignments, the system determines the FM account assignment from the cost center of the technical object (functional location, equipment) which is assigned to the plant maintenance order.
    FM takes care of budget related processes from creation of maintenance order till settlement.
    Hope this helps you to decide an appropiate approach.
    Regards,
    S.Basu
    Edited by: S Basu on Nov 10, 2011 5:34 PM
    Edited by: S Basu on Nov 10, 2011 5:34 PM

  • In sm30, when save, how to fill the table with the system data in the table

    Hi all, in SM30, we have user name and time fields, when we create record, after we click the SAVE button, it will automatically fill the fields with the system data, how can we realize it?

    Hi ,
    Do like this.
    1. Go to SE11 -> give your table name and press on change button .
    2.Go to Menu->Utilities-> Table Maintainance Generator , then it will take you another screen .
    3.Assign Functin group if already have one , other wise create function group and assign
    4.Go to Menu->Environment->Modification->Events , again it will take you to another screen
    5.Click on new entries
    ->Now press F4 in T column . Select<u> "01" - Before saving the data in the database</u> and in form routinue give any name of the routinue like "SAVE_USER_DATA" and press enter then u can see an editor symbol in next column click on that it will take you ABAP editor there type this code .
    ztable-username = sy-uname.
    ztable-createtime = sy-uziet.
    check and activate the code .
    With this your job will be complete . Now while entering data just leave columns blank , they will insert corresponding username and time
    Don't forget award points if it helps you.
    Regards,
    Raghav

  • How to fill the data in  extraction queue (LBWQ)?

    Hi,
    I modified the structure of datasource 2LIS_02_SCL (change an append structure), since an error occurs when I check the datasource, I deleted the the deltaqueue in RSA7, before that, I also checked the extractorqueue, it was empty.
    But when I excute OLI3BW to fill the extractor queue, it happens nothing.
    How can I fill the data in extractor queue so that I can extract data from R3 to BW?
    Thanks .
    Regards

    Whta u have done is Filling setup tables not the extractor queu......
    Could you please tell whether ur load is delta load or Full load?
    Khaja

  • How to extract the budget data from essbase to Ms access database

    Hi,
    i want to know how to extract budget dat fro hyperion to Ms access database
    please help me in this regard how to proceed, and what are the process i need to follow
    Regards
    Hypuser

    You can write a Calc script to export only the 'Budget' data and loaded back the exported file into MS Database via Loader or import.
    Cheers
    Cnee:)

  • How to Fill the selection screen while calling the transaction

    Hi All,
             my requirement is in one of the screen while i will press a push button it will call one transaction and it will fill the selection screen build order number field and skip the first screen i.e the selection screen it will show the output of that report directly.
    am using this code .
    case sy-ucomm.
    while 'FSLR'.
    set PARAMETER ID 'ANR' FIELD aufnr.
    RANGES s_aufnr FOR afko-aufnr.
          s_aufnr-sign   = 'I'.
          s_aufnr-option = 'EQ'.
          s_aufnr-low    = aufnr.
          APPEND s_aufnr.
    CALL TRANSACTION 'ZFS1' USING s_aufnr
         MODE 'E' .
        AND SKIP FIRST SCREEN.
    endcase.
    here the problem is i cant use both skip screen and using at a time nither the screen is filling nor its skipping the first screen.
    but its not working would any one please help how can i do this functionality?

    Hi
    Do in this way.
    DATA: rspar TYPE TABLE OF rsparams WITH HEADER LINE.
    rspar-selname = 'S_AUFNR'.
    rspar-kind = 'S'.
    rspar-sign = 'I'.
    rspar-option = 'EQ'.
    rspar-low = 'aufnr'.
    APPEND rspar.
    SUBMIT zfs1_prog  VIA SELECTION-SCREEN WITH SELECTION-TABLE rspar AND RETURN.
    If this doesnt suit yer requirement, I wud suggest you to use BDC as below.
    CALL TRANSACTION 'SE11' USING bdcdata
                           MODE   'E'
                           UPDATE 'A'.

  • How to fill the details tab in the iPad tv shows with description

    Can anyone tell how to fill out the details tab metadata in the tv shows section of iPad? The tv shows purchased from the iTunes Store have the details tab beside the episodes tab filled in with helpful description about the show. Isn't there a way to do that manually for personally downloaded tv shows? It's not possible to buy every content from the iTunes Store. Please help if anyone know how to add description to tv show details.

    You should be able to do it on your computer's iTunes - select the TV programme in the TV Shows part of your iTunes library, do 'get-info' (control-I) on it, and on the popup select the Video tab and enter what you want to have in its Description field and then sync that updated version to your iPad.

  • How to fill the segment name field in a data record

    Hi All,
    I am using pure java (jco) (not XI) to send idoc to R3. I know how to check the definition of Idoc type by using Tcode - we30, we05, BD......
    I am wondering if someone on this forum has the onhand experience about the following question:
    The "segment name" field in a data record should be filled with "Segment type" or "Segment Name". Sounds silly? huh? But this question is not always clear for me.
    For instance, E1MBXYH - Goods movements for Mobile data entry.
    There are three versions - E2MBXYH, E2MBXYH001 and E2MBXYH002.
    Should I use "E1MBXYH" or one of E2MBXYH, E2MBXYH001 and E2MBXYH002?
    I appreciate that you could give me a clear explanation.

    The EAN / UPC fields are part of the material master .. So if you hahve this fileds filled in MM02 , then automatically these fileds are taken where ever the material Number is referenced

  • HT204053 I don't know how to fill the process for the renew option?

    How can I fill the blanks for renew process ?

    The blanks for what 'renew process' ? What screen are you viewing and what are you trying to renew ?

Maybe you are looking for