How to filter the Event Data from the EventHub when consuming data?
We know the EventHub has the filter function. I'm designing a new solution for a customer and it looks like EventHubs are great for sending and receiving our near-realtime
data. Downside is when receiving the data, we receive all data of all our devices in the world. Most of the time, our clients only want to see data of one (or a few) device. We could of course filter the data by ourselves, client side, but
this would cost a lot of bandwith.
From the
FeedBack, it said Filters will be tied to Consumer Groups. And I Check the Consumer Group Class, it has the Create Time and Update Time, but it
has no set Function,
So how to use the Consumer Group to filter Event Data during the Receiving data?
Because in our solution, we use the EventHubHost to consume data, if our service bus worker role restart, we will receive all data in the EventHub, but we only want
to receive the latest data,
If we use the EventHubHost to consume data, can we also to filter data? If yes, how to do?
Thanks very much!
Yes right,
AFAIK there isn't a filter feature for Event Hub. The only way to have now is to put a specific property inside your EventData that consumer group can check to filter if it is interested in the data or not.
Paolo.
Paolo Patierno
Similar Messages
-
I'm a beginner with iMovie and my hard drive is filling up fast. How do I move the event files from the hard drive to my time capsule?
you should never (ab)use a designated backup-setup for 'ordinairy' storage tasks.
plus, the wireless connection to TC is too slow for iMovie.
purchase any ext. usb-harddrive, 500Gigs starting at 50$ ...
you HAVE to follow advice given here:
http://help.apple.com/imovie/#mov3ac6d42c -
How to start midi event playing from the middle of event?
I'm not sure if my post title is correct but...
I have a two minute piece of music with various instruments playing. There are some strings that play the same couple of notes throughout.
At the moment I am working on a middle section but as I loop, the srings aren't triggered - I have to play from the start (before the event starts). I did not have a problem with Cubase but I can't find a way to do this in Logic.
It's probaly quit simple though?This typically means the midi notes themselves start before the beginning of the loop point you have choosen
You can quantize or manually move the first notes so that they start at the beginning of the loop and not just before... to resolve this..
Select the regions and then check the event list for the region to confirm this is what is going on... -
How do I get events back from the trash? 10.0.3
Trying to move some of my older projects and events to a backup drive. I created a new library on the drive, but I could not move anything to the new project. So I copied events by dragging thme into the new library. Then I moved the events to the trash. However, I cannot move projects. How? (See a recent question about this.) I then found that my projects (which I cannot move) have no content (because I have put the events on the trash. But there is nothing about the trash, except putting things in it. I can't even see how to empty it, let alone retrieve from it.
Well, I've found out how to delete the trash - close iMovie. Ouch!
-
Error trying to acces to the event subscriptions from the events web page
Hi all,
I receive the following error when I try to acces to the event suscriptions link from the events page.
Error: 3814: Please load Event System Seed Data before accessing this function.
Somebody knows what that means?.
Thanks in advance.
FernandoPlease review the Workflow Server Installation instructions. There is a post install step for Workflow Server 2.6.0 only which requires you to runa SQL script to upload seed data. If you have any further issues with your install, please log an iTAR with Oracle Support via Metalink.
Hi all,
I receive the following error when I try to acces to the event suscriptions link from the events page.
Error: 3814: Please load Event System Seed Data before accessing this function.
Somebody knows what that means?.
Thanks in advance.
Fernando -
Srollpane scrolls when loaded data from XML, not when loaded data from ASP
Hi,
I load into scrollpane a swf, which has a dynamicly loaded
data. If I use the XML file, it works (the scrollbar is visible),
but if I use a asp file, which creates xml, it doesn't work (the
scrollbar is not visible). Any ideas?Hi,
let say I have a A.swf and a B.swf. In A.swf I have a
scrollpane in to wich the B.swf is loaded. Below is the code in
B.swf. If I load the data from a asp file, the scrollbar in the
scrollpane is not visible, but if I use the xml file, the scrollbar
is visible.
What I've meant is that I think that Flash gets the same form
of data, no matter if I use the asp or xml, because the asp creates
the same xml form as I use in the xml file. I hope this makes any
sense. -
HI
Since the SCOM was Upgrade to R2
Almost at every Day, we receive in the Event log application the Event 720 from the correlation service Source MSExchangeMonitoring Correlation
This arrives always around 7:20AM, someday is at 7:19, other at 7:21. It is always approximately at the same hour, but we never have any problem during weekend
The description of the Event
Exceeded maximum time (15 minutes) to wait for completion of all CorrelateBatchTask threads.
After that the correlation stop to work. At the Same time if we tried to open the SCOM Console on that server we was unable to open it. Also we was not able to open the SCOM PowerShell
And also we cannot from that server to get which server is the RMS if we run get-SCOMRMSEmulator . (This the RMS Server)
When this arrive, the only thing we found, it to reboot the server or restart de SCOM service, after the Reboot the Correlation begin to work
We got also many Event 714 Critical and after this Event 711 Warning
ThankHave a look at: https://social.technet.microsoft.com/Forums/systemcenter/en-US/e75e84d9-0c9e-4d83-b3da-45a143757f85/exchange-2010-monitoring-with-scom-2012-correlation-service-issue
One user reported an issue with the exchange correlation engine after upgrade and said that:
I had issues with the corellation engine after upgrading scom 2012 to R2.
The MomBidLdr.dll version changed in the SCOM directories, and needs to be updated in the:
C:\Program Files\Microsoft\Exchange Server\v14\Bin directory.
That seemed to stop the errors for me.
Some troubleshooting steps listed here also:
https://technet.microsoft.com/en-us/library/ff360495(v=exchg.140).aspx
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
How do i parse data from the second jframe back to the first?
Hello.
I have a jFrame were I promt users to keep a list of Names in a jTable. (I keep data for something else, but lets say names.. ) Anyway, afterwords I want to add some extra parameters for each name. So I created a new frame, which is opened when user press an Edit button. The new frame opens and users can add for the specific name some extra data, like age, height, color, sex.. etc. that characterizes this person.
On this second form i have a save button, which when its pressed i would like to keep this information for this name, so as when user press edit again from the first frame on the same Name the data that previously entered will be loaded (lets say that the user can not enter the say name again)
I haven' t figured the code for the save Button, but with the rest I am fine.
Can you give any ideas with structures that I have to use and how the action listener will have to be??
When I set visible the new form i have made a constructor that loads the new form which have a label with the name of the person that is edited., but how do i parse data from the second form back to the first that is already opened??
Thanks very much..I found it.. it was not so hard afterall..
anyway, i quote the new code..
package namelist;
// Java core packages
import java.awt.event.*;
import java.util.*;
// Java extension packages
import javax.swing.*;
import javax.swing.table.*;
public class NamesGUI extends javax.swing.JFrame {
//Variables for managing the jTables
DefaultTableModel tableModel;
Vector rows,cols;
String[] colName1 = {"List of Names"};
ManageJTables mJT = new ManageJTables();
Hashtable h;
/** Creates new form ProsAgentGUI */
public NamesGUI() {
h = new Hashtable();
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
Panel = new javax.swing.JPanel();
ToolBar = new javax.swing.JToolBar();
ADD = new javax.swing.JButton();
EDIT = new javax.swing.JButton();
REMOVE = new javax.swing.JButton();
jButton1 = new javax.swing.JButton();
TScrollPane = new javax.swing.JScrollPane();
Table = new javax.swing.JTable();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setTitle("Names");
setBackground(new java.awt.Color(0, 51, 51));
Panel.setBorder(javax.swing.BorderFactory.createTitledBorder("List of Names"));
ToolBar.setBorder(javax.swing.BorderFactory.createEmptyBorder(1, 1, 1, 1));
ADD.setText("ADD");
ADD.setToolTipText("");
ADD.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
ADD.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
ADDActionPerformed(evt);
ToolBar.add(ADD);
EDIT.setText("EDIT");
EDIT.setToolTipText("");
EDIT.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
EDIT.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
EDITActionPerformed(evt);
ToolBar.add(EDIT);
REMOVE.setText("REMOVE");
REMOVE.setToolTipText("");
REMOVE.setBorder(new javax.swing.border.SoftBevelBorder(javax.swing.border.BevelBorder.RAISED));
REMOVE.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
REMOVEActionPerformed(evt);
ToolBar.add(REMOVE);
jButton1.setText("jButton1");
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
ToolBar.add(jButton1);
rows=new Vector();
cols= new Vector();
cols=mJT.addColumns(colName1, cols);
tableModel =new DefaultTableModel();
tableModel.setDataVector(rows,cols);
Table.setModel(tableModel);
TScrollPane.setViewportView(Table);
org.jdesktop.layout.GroupLayout PanelLayout = new org.jdesktop.layout.GroupLayout(Panel);
Panel.setLayout(PanelLayout);
PanelLayout.setHorizontalGroup(
PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(ToolBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
.add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 210, Short.MAX_VALUE)
PanelLayout.setVerticalGroup(
PanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(PanelLayout.createSequentialGroup()
.add(ToolBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 34, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(TScrollPane, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 159, Short.MAX_VALUE))
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap(org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap(29, Short.MAX_VALUE)
.add(Panel, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
pack();
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
System.out.println(h.toString());
public void updateNamesTable (int id, String na){
Integer i2 = new Integer(id);
Object o2 = (Object)i2;
if (h.containsKey(o2)){
Name a = (Name)h.get(o2);
a.name = na;
h.put(o2,a);
else {
Name aa = new Name();
aa.name=na;
h.put(o2,(Object)aa);
private void EDITActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
String name = Table.getValueAt(Table.getSelectedRow(),0).toString();
int rowNum= Table.getSelectedRow();
Integer i = new Integer(rowNum);
Object o = (Object)i;
updateNamesTable (rowNum, name);
//public NameEditor(Name n, Hashtable h, int id)
NameEditor re = new NameEditor((Name)h.get(o), h, rowNum );
re.setVisible(true);
private void REMOVEActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
mJT.deleteRow(Table.getSelectedRow(), rows, Table);
private void ADDActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
mJT.addRow(rows, Table);
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new NamesGUI().setVisible(true);
// Variables declaration - do not modify
javax.swing.JButton ADD;
javax.swing.JButton EDIT;
javax.swing.JPanel Panel;
javax.swing.JButton REMOVE;
javax.swing.JScrollPane TScrollPane;
javax.swing.JTable Table;
javax.swing.JToolBar ToolBar;
javax.swing.JButton jButton1;
// End of variables declaration
public class NameEditor extends javax.swing.JFrame {
Hashtable h;
Name n;
int id;
/** Creates new form NameEditor */
public NameEditor() {
initComponents();
public NameEditor(Name n, Hashtable h, int id) {
this.h=h;
this.n=n;
this.id=id;
initComponents();
NameField.setText(n.name);
jTextField2.setText(n.weight);
jTextField1.setText(n.height);
setDefaultCloseOperation(javax.swing.WindowConstants.DISPOSE_ON_CLOSE);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
NameLabel = new javax.swing.JLabel();
NameField = new javax.swing.JTextField();
SaveBut = new javax.swing.JButton();
jLabel3 = new javax.swing.JLabel();
jLabel4 = new javax.swing.JLabel();
jTextField1 = new javax.swing.JTextField();
jTextField2 = new javax.swing.JTextField();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
setTitle("Name Editor");
getAccessibleContext().setAccessibleName("Name Editor");
NameLabel.setText("Name: ");
NameField.setEditable(false);
NameField.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
NameFieldActionPerformed(evt);
SaveBut.setText("SAVE");
SaveBut.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
SaveButActionPerformed(evt);
jLabel3.setText("Height");
jLabel4.setText("Weight");
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(getContentPane());
getContentPane().setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.add(jLabel4)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED))
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jLabel3)
.add(NameLabel))
.add(16, 16, 16)))
.add(17, 17, 17)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 138, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING, false)
.add(org.jdesktop.layout.GroupLayout.LEADING, jTextField2)
.add(org.jdesktop.layout.GroupLayout.LEADING, jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 46, Short.MAX_VALUE))))
.add(org.jdesktop.layout.GroupLayout.LEADING, layout.createSequentialGroup()
.add(127, 127, 127)
.add(SaveBut)))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(NameLabel)
.add(NameField, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(30, 30, 30)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jLabel3)
.add(jTextField1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.add(12, 12, 12)
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jLabel4)
.add(jTextField2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE))
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 27, Short.MAX_VALUE)
.add(SaveBut)
.addContainerGap())
pack();
public void updateNameTable (){
Integer i2 = new Integer(id);
Object o2 = (Object)i2;
h.put(o2,n);
private void SaveButActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
n.height= jTextField1.getText();
n.weight = jTextField2.getText();
private void NameFieldActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new NameEditor().setVisible(true);
// Variables declaration - do not modify
javax.swing.JTextField NameField;
javax.swing.JLabel NameLabel;
javax.swing.JButton SaveBut;
javax.swing.JLabel jLabel3;
javax.swing.JLabel jLabel4;
javax.swing.JTextField jTextField1;
javax.swing.JTextField jTextField2;
// End of variables declaration
} -
How to read data from the data provider using javascript
Hi,
Please let me know how to read the data from the dataprovider using javascript(query assigned to the data provider).
My query has filter charateristics, free charateristics, charateristics in rows and key figure in column.
Thanks a lot for your kind help
Regards
KandasamyKandaswamy,
Assign an ID to your table item , then in JavaScript , you can use ID.innerHTML and you will get the HTML code within that table for the same , then you can find out how best to get the exact value you desire from the innerHTML value which is a string with the entire HTML from within the table item.
Arun
Hope it helps.... -
How configure a primavera web service to return data from the second database?
Hi everyone,
We have P6 with first WS deployed on a single server weblogic domain. The first WS return data from the first database instance.
Then deployed advanced second WS on a separate weblogic domain server with a different port. Configured second WS with <WS2_INSTALL_HOME>/bin/dbconfig.sh, creating a new branch of a configuration that specifies a different second instance of the database. However, this configuration is ignored and second web services return data from the first database.
We have one domain, which including next servers:
Name / Host / Port / Deployments
P6 / localhost / 0001 / P6(v8.3), p6ws1(v8.3)
p6ws2 / localhost / 0002 / p6ws2(v8.3)
Now we have two different file BREBootstrap.xml.
P6 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db1:1521:db1</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass1</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB1" instances="1" logDir="anydir/P6EPPM/p6/PrimaveraLogs"/>
</Configurations>
p6ws2 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db2:1521:db2</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass2</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB2" instances="1" logDir="anydir/P6EPPM/ws2/PrimaveraLogs"/>
</Configurations>
‘P6 Config_DB1’ and ‘P6 Config_DB2’ including Database property for 1 and 2 database respectively.
How to configure a second web service to return data from the second database?
Thanks in advance!
Regards,
DmitryOK, so I got this to work this morning with Username Token Profile (with little help from Oracle Support).
I followed your steps 1-4 but in step 2 I didn't add the -Ddatabase.instance=2 because I want to check to see if my code could swap between different instances.
It appears for Username Token Profile to use Database Instance, you need to set it in the soap header.
So my soap request looks like this:
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<s:Header>
<DatabaseInstanceId xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Authentication/V1">2</DatabaseInstanceId>
<o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<u:Timestamp xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3'>
<u:Created>2014-10-23T04:28:01.152Z</u:Created>
<u:Expires>2014-10-23T04:29:01.152Z</u:Expires>
</u:Timestamp>
<o:UsernameToken u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3' xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd'>
<o:Username>admin</o:Username>
<o:Password Type='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText'>password</o:Password>
<o:Nonce EncodingType='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary'>vJBQhCc28bAeszej7gOaiC2tVCQ=</o:Nonce>
<u:Created>2014-10-23T04:28:01.152Z</u:Created>
</o:UsernameToken>
</o:Security>
</s:Header>
<s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ReadProjects xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Project/V2">
<Field>ObjectId</Field>
<Field>Id</Field>
<Field>Name</Field>
<Field>Status</Field>
<Field>StartDate</Field>
<Field>FinishDate</Field>
<Field>DataDate</Field>
<Filter>Id = 'EC00515'</Filter>
</ReadProjects>
</s:Body>
</s:Envelope>
This request pulled the project from the second instance.
V/r,
Gene -
My imported movie shows up in the event library under 2006 date, month of march, the movie name. I want the movie to show up in the event library under the date I choose and the movie name. How do I do this?
rogerhermans wrote:
I did change the name of the event. I cannot change the date of the event in the Modify command. The date and month was selected by the system as I did not name my event to start with. I now want to change the date (from 2006 to 1987) , delete the month and show the event name. I want the event library to post all my events by year (specified by me) and name of event.
you can change the date, so that FCPX categorizes it properly. First delete the clip(s) from FCPX, but not from your computer entirely, make sure you have the originals somewhere.
Open a terminal window and use the following command:
touch -t 198711280800.00 <path/filename of clip>
Where the format is: (use leading zeros if necessary for date & time)
first four digits: year
next four: month and day
next four: time of day (in 24 hour format)
next 2: seconds as a decimal (this is optional, if you leave it off you will get 00 seconds)
The above example will change the file date to Nov. 8, 1987 08:00:00 AM
This will change the created, modified and last access dates of the clip/file.
Then reimport the clip(s) and FCPX should categorize it properly. -
Filter a List for data from the Previous Month
Hello,
I have audit data for each month of the year. At the beginning of one month I pull a report from the previous month. I would like to have a view in my SharePoint list that shows only the data from the previous month.
I am not a programmer or developer, so I was wondering if this is possible without out of the box tools.
Here is what I have done so far:
Created two calculated columns to find the start and end date of the previous month
Previous Month Start =DATE(YEAR([Date of Review]),MONTH([Date of Review])-1,1)
Previous Month End =DATE(YEAR([Date of Review]),MONTH([Date of Review]),0)
I have verified these two calculations do show the correct dates.
So I can generate the dates, but I don't know how to set up a view filter that will show only data from the previous month.
Please help.What you need is the calculated column to display the start and the end of the next month, not the previous month. Then you can do a view filter where Start<Today & End>Today.
EX: If you have a document with date 15-03-2014, you need to save the dates 01-04-2014(start) and 30-04-2014(End).
Then If Start < [Today] and End > [Today], you can show the document -
Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?
If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability -
How I can transfer data from the database into a variable (or array)?
I made my application according to the example (http://corlan.org/2009/06/12/working-in-flash-builder-4-with-flex-and-php/). Everything works fine. I changed one function to query the database - add the two parameters and get the value of the table in String format. A test operation shows that all is ok. If I want to display this value in the text area, I simply drag and drop service to this element in the design mode
(<s:TextArea x="153" y="435" id="nameText" text="{getDataMeanResult.lastResult[0].name}" width="296" height="89" />).
It also works fine, just a warning and encouraged to use ArrayCollection.getItemAt().
Now I want to send the value to a variable or array, but in both cases I get an error: TypeError: Error #1010: A term is undefined and has no properties..
How can I pass a value from the database into a variable? Thank you.
public var nameTemp:String;
getDataMeanResult.token = authors.getDataMean(arrayOfNumber[0], dir_id);
nameTemp = getDataMeanResult.lastResult[0].name;
public var nameArray:Array = new Array();
for (var i:uint=o; i<3; i++){
getDataMeanResult.token = authors.getDataMean(arrayOfNumber[i], dir_id);
nameArray[i] = getDataMeanResult.lastResult[0].name;
And how i can use syntax highlighting in this forum?Astraport2012 wrote:
I have to go back to the discussion. The above example works fine when i want to get a single value of the database. But i need to pass an array and get an array, because i want to get at once all the values for all pictures tooltips. I rewrote the proposed Matt PHP-script and it works. However, i can not display the resulting array.
yep, it won't work for Arrays, you'll have to do something slightly more intelligent for them.
easiest way would be to get your PHP to generate XML, then read that into something like an ArrayList on your HTTPService result event (depends what you're doing with it).
for example, you could have the PHP generate XML such as:
<pictures>
<location>test1.png</location>
<location>test2.png</location>
<location>test3.png</location>
<location>test4.png</location>
<location>test5.png</location>
<location>test6.png</location>
</pictures>
then you'll read that in as the ResultEvent, and perform something like this on it
private var tempAC:ArrayList = new ArrayList
protected function getStuff_resultHandler(event:ResultEvent):void
for each(var item:Object in event.result.pictures)
var temp:String = (item.@location).toString();
tempAC.addItem(temp);
in my example on cookies
http://www.mattlefevre.com/viewExample.php?tut=flash4PHP&proj=Using%20Cookies
you'll see an example of how to format an XML structure containing multiple values:
if($_COOKIE["firstName"])
print "<stored>true</stored>";
print "<userInfo>
<firstName>".$_COOKIE["firstName"]."</firstName>
<lastName>".$_COOKIE["lastName"]."</lastName>
<userAge>".$_COOKIE["userAge"]."</userAge>
<gender>".$_COOKIE["gender"]."</gender>
</userInfo>";
else
print "<stored>false</stored>";
which i handle like so
if(event.result.stored == true)
entryPanel.title = "Welcome back " + event.result.userInfo.firstName + " " + event.result.userInfo.lastName;
firstName.text = event.result.userInfo.firstName;
lastName.text = event.result.userInfo.lastName;
userAge.value = event.result.userInfo.userAge;
userGender.selectedIndex = event.result.userInfo.gender;
depends on what type of Array you're after
from the sounds of it (with the mention of picture tooltips) you're trying to create a gallery with an image, and a tooltip.
so i'd probably adopt something like
<picture>
<location>example1.png</location>
<tooltip>tooltip for picture #1</tooltip>
</picture>
<picture>
<location>example2.png</location>
<tooltip>tooltip for picture #2</tooltip>
</picture>
<picture>
<location>example3.png</location>
<tooltip>tooltip for picture #3</tooltip>
</picture>
etc...
or
<picture location="example1.png" tooltip="tooltip for picture #1"/>
<picture location="example2.png" tooltip="tooltip for picture #2"/>
<picture location="example3.png" tooltip="tooltip for picture #3"/>
etc... -
A week or so ago, the screen on the Macbook Pro I've had for 5 years went permanently black. The screen itself still works, but it's just all black. Went from flickering/flashing to black. I didn't have any kind of warranty on it or anything, and in addition to all of the other things about it that needed fixing, it seemed like it'd just be cheaper to get a new Macbook Pro.
My question is: How do I get all the stuff from the old laptop to the new laptop without having to use the old laptop's display? Is there a cable I can use to connect the two, and I can just access the old one from the new one?FireWire between the two (get appropriate 800-800 or 400-800), Target Disk Mode on the old one, appears as an external disk on the new one. Drag everything over, or use Setup Assistant if first start of new one, or plain old Migration Assistant. You really don't need a display to see a prancing FireWire icon, do you?
http://support.apple.com/kb/HT1661
http://support.apple.com/kb/HT4889
(with the added advantage that since you ain't booting anything off the drive, can turn the Mac on or off at will without risking data corruption on the drive)
Maybe you are looking for
-
Photoshop cs4 color changes after I save it from psd to jpg
I have used cs2 for years and just got cs4 and I always work on my pictures in raw then save them as psd then open them in photoshop and work on them and save as jpg for printing. I can't seem to be able to do how I used to. I open the picturte in r
-
Creating user exits for Formula Routine in Tcode O5F5
Hi All, I have to create a new rounding routine for my projet in transaction O5F5. The path which i have taken is. In transaction O5F5. Maintain Formula & Average Pricing Exit -> Formula Evaluation -> Formula rounding. Now after creation a new formul
-
Oracle CC&B Upgrade (1.5.15 - 2.3) - 6 CBL programs failing during applyCM
Hi, our team is carrying out the Oracle CC&B upgrade from 1.5.15 to 2.3. we are able to compile the COBOL programs on the Micro focus environment. But about 6 COBOL programs are failing during the package installation (while executing the applyCM.cmd
-
My keys are getting stuck. When I touch an app icon or try to type an email or text. Also my home screen is off center. Anyone got any ideas?
-
WLS 8.1B - LoggingHelper class not in weblogic.jar
While testing a servlet that uses the weblogic.logging.NonCatalogLoger class to perform logging I ran into several problems. 1) The alert() and critical() methods of the NonCatalogLogger class documented in the API javadoc do not appear to be in the