How to find a line number when using cfinclue

Hi, I have a cfset causing an error on line 143 the problem
is that the index.com is made of includes, how do I find which
include CFSET is causing the error (the error code doesn't include
the text that is making up the error.... only says coldfusion was
looking at http - which I have in many places...) dreamweaver isn't
including the documents to look up their code either....
Thanks

Sometimes it's quicker to just do the dumb thing. Number of
lines before first include + number of lines in first include +
number of lines between first include and second include + number
of lines in second include + ... till you get to around 147. I say
"around" because you only have to know you're, say, between lines
140 and 155. Your error message should give you a clue which line
is the likely culprit.

Similar Messages

  • How to find related User commands when Use MSS PCR scenarios

    Hi
    We are using  MSS PCR Senarios with Web dynpro Business package.
    How to  know which command is fired when click on buttons PCR web dynpro screens like "Sumbit" "Resubmit" buttons.
    is there any document which tells about the all the standard buttons and its corresponding user commands in R/3 to handle in BADI.
    I have gone through the ISR cook book but not find much information
    Thanks in Advance
    Gopal

    Yes - it is a bit frightening... Had other Macs before this MacBook (Pro), and never experienced such a problem. Don't know - of course I look into the Preference settings from time to time, and maybe I have changed that setting on the other computers... it never occurred to me...
    What an annoyance such a simple decision to make the auto-shutdown after one hour a default can be! Probably, Apple reconsiders :-D I'd rather prefer an auto-lock of the account (instead of an auto-log off)... but I believe it has been expressed often enough that, in this particular case, the - pardon me - Windows-solution (to offer a simple lock of the account, the Windows-L-key combination, IIRC) is much more practical... to copy that behaviour under Mac OS X, You'd have to go through lengths...
    Anyway! Pondind, thank You very much!!! Solved a kind of embarassing, but huge problem of mine!
    Best,
    Björn

  • How to retain new line characters when using Node.getNodeValue()

    Hi,
    I have xml as shown bellow
    *<DETAILS>*
    this is line one
    this is line two
    thi is line three
    *</DETAILS>*
    when I parse this using dom( Node.getNodeValue() ), the value I am getting is as shown bellow
    this is line onethis is line twothis is line three
    but I wanted as is I have in my xml i.e,
    this is line one
    this is line two
    this is line three
    ( to show that as is in HTML page)
    can some body help me ??
    Thanks in advance .

    Hi,
    You could try this:
    replace(your_data, chr(10), '')

  • How to find the GL number(SAKNR) using Order number (AUFNR)

    I need to find out the GL number (SKB1-SAKNR) associated with the order (AUFK-AUFNR). Can somebody tell me to link the AUFNR to SKB1-SAKNR.
    Thanks,
    mini

    Hi,
    Orders are not associated with the G/Ls. The intersection between the two comes from the document itself; the documents are stored in CEOP table. However, you might have defaults for G/L; they are entered via KA02 or OKB9 transactions or via substitutions.
    Regards,
    Eli

  • How to find your modem speed when using Leopard

    This is a handy idea for those, like me, using dial up while running Leopard. Leopard does not display the connection speed of the modem. A user from these discussions suggested copying Internet Connect from Tiger and installing it within a Leopard system. I tried it and the app works great in the newer system.
    This helpful hint came from deep within another discussion thread and I wanted to share it with others who want to know the connection speed of their modem. Yes, yes, I know, who still uses modems. No need to comment on that, thanks.

    Thanks for the post. I still have to use dial up from time to time and was upset I could not see the connection speed.
    This still works in 10.5.7

  • HT4061 How can I find my IMEI number when my phone is already stolen. Do Apple keep a record?

    I had my iphone replpaced at the apple store in sydney on the 25 June and have since had it stolen.
    I do not have any receipts how do I find out what my IMEI number was??

    iOS- How to find the serial number, IMEI, MEID, CDN, and ICCID number
    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • HT1391 Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit

    Hi can anyone tell me how to find out what and when my last purchases were made from the App Store ? I think my kids used all my credit

    .from iTunes, go to View > Show sidebar
    From sidebar > Itunes Store > Click top left on your Apple ID email address > Account > ...scroll down > Purchase History > View All

  • I have no idea how to find my serial number to launch Lightroom. I have the student teacher edition and I'm using a mac

    I have no idea how to find my serial number to launch Lightroom. I have the student teacher edition and I'm using a mac.

    How did you purchase Lightroom? Download? Package?
    Have you followed the instructions to verify that you qualify for academic discount?

  • How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one?

    Based on http://forums.adobe.com/thread/1308132?tstart=0 I decided to add each question seperately:
    Hello, I'm quite interested in buying Lightroom 5.2. I tried the RC which ran out now. Yet, I have a several questions that I can't really find good conclusive answers to, that I'd like to get answered before buying LR. Please don't write maybe like this or that (assumptions), since I don't want to start my whole workflow and then realize that I have to change everything around, so please answer, if you know for sure that something works and you are, preferably, using that method too.
    This is the biggest question, where I mainly want a conclusive answer:  How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one of them, using the same photos for editing. I won't use DNG. Details: I mainly use my older MacBook Pro, but would like to be able to use my PC as it's way better (Specs: i5 2500K, 16GB RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HDs that I could use, one for Backup and one for the actual Photos/Edits. I'll probably need to use it as my internal HDs are quite full, and I can't just delete stuff or move it to an (Developer programs, Lossless music, etc.).
    Based on this, how do I back up the whole thing e.g. Photos folder (all photos and edits, and preferably presets too)?

    I believe it should be possible to work cross-platform without having to relink files each time, or without having to keep exporting/importing the catalog, by keeping the single catalog and the image library on the one external drive which is then switched between systems as needed.
    Obvious first requirement is an external drive that is formatted in such a way (e.g FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalog AND the images parent folder are both established at the same level in one overall parent folder, then it should be possible to take advatage of Lightroom's ability to use relative paths rather than absolute paths to detect the images, no matter if the drive is named (Mac) or lettered (PC). This is how "export as Catalog" works, i.e. it creates a "package", aka a parent folder, containing the catalog and a replica of the exported images folder hierarchy alongside the catalog. Take that "package" to another system (same OS or not) and "it just works" even if the drive letter is different or the OS is different....because the relative path from catalog to images is still the same.
    I haven't tested this cross-platform (though I have between different PC systems with different drive letters) so for me it's still just a theory, but there may be others who have done this successfully.

  • How to find out which keywords were used to create a smart album?

    Hi,
    I actually have 2 questions;
    a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
    b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
    Any clues?
    Thanks guys,
    Raphael
    <Edited by Host>

    b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
    Any clues?
    Raphael,
    that message may occur for four reasons at least:
    Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
    Apple Support Communities Terms of Use
    Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
    Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
    Or it is one  of the unexplained problems with the forum software right now.
    a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
    I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
    Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders.  In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
    My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
    I use the search field in HUD a lot, to filter the set of keywords shown.

  • How to find out if I am using a 32 bits or 64 bits version of JRE?

    How to find out if I am using a 32 bits or 64 bits version of JRE?
    If I have 2 instances of Java installed in 2 seperate directories, one 32 bits and other 64 bits on Linux. How do I identify which directory holds which version?
    Is there any command that can output this info?
    Regards,
    Billamama

    With a Sun JDK or JRE, you can use java -version:
    $ java -version
    java version "1.6.0"
    Java(TM) SE Runtime Environment (build 1.6.0-b105)
    Java HotSpot(TM) Server VM (build 1.6.0-b105, mixed mode)
    ... switch to the 64-bit JDK ...
    $ java -version
    java version "1.6.0"
    Java(TM) SE Runtime Environment (build 1.6.0-b105)
    Java HotSpot(TM) 64-Bit Server VM (build 1.6.0-b105, mixed mode)
    The last line says "64-Bit."

  • HT1338 Can anyone tell me how to find what OS I'm using on the Mac? Tiger or Leopard? Also, how do I update from 10.6.8 to the latest version?

    Can anyone tell me how to find what OS I'm using on the Mac?
    Tiger or Leopard?
    Also, how do I update from 10.6.8 to the latest version?

    Go to the Apple menu and select "About This Mac". You will get a window similar to this one -
    You current OS X version number will be shown as I've marked.
    OS X 10.4.x is Tiger, 10.5.x is Leopard, 10.6.x is Snow Leopard, 10.7.x is Lion, and 10.8.x is Mountain Lion.
    Whether or not you can go to the latest OS X version depends upon your hardware -
    You will need to purchase the retail set for the OS X version you want; there is no pint in getting and installing any intermediate versions. Once the retail version has been installed, you can update it to the latest release for that version via download updater.

  • How to find out asset number in SAP

    Hi,
    Please let me know how to find out asset number based on the depreciation document number.
    Regards,
    Bhaskar Suruvu

    In the FI document header text / line item text you found back the asset document number like:
    AFB01200900101-0000000001
    In the table ANLP you can found back the document number -0000000001
    On this way you can make the link

  • How to find the columns and tables used in a stored procedure?

    Hi,
    Can someone suggest how to find the columns and tables used within a stored procedure?
    Thanks
    VBK

    For example:
    SQL> create or replace
      2    procedure p1
      3      is
      4          cnt number;
      5      begin
      6          select count(*) into cnt from emp;
      7  end;
      8  /
    Procedure created.
    SQL> select  referenced_owner,
      2          referenced_name
      3    from  dba_dependencies
      4    where owner = 'SCOTT'
      5      and name = 'P1'
      6      and referenced_type = 'TABLE'
      7  /
    REFERENCED_OWNER               REFERENCED_NAME
    SCOTT                          EMP
    SQL> SY.

  • How to find ThinkPad serial number if label is worn?

    QuestionI'm having some trouble with my T500 ThinkPad and want to contact service, but am not sure how I can find out the machine type and serial number to provide to support when I call because the sticker on the bottom of the laptop is faded so I don't know what the S/N is. I do have one number though: [serial removed] was what I copied down from it before it became faded. I dont know what to do now, so if you have any ideas, that'd be great.
    Answer 
    Generally the label with type and serial information is found on the bottom of laptops and tablets and on the rear of desktop systems and on the back or along the edge of displays.   As noted by the question asked above, in some cases, the label may become worn.  To reduce / avoid this, the type / serial label was relocated to the battery compartment on some systems with removable batteries, along with the Win 7 COA.  As Win 8 does not have a COA lable, and print technologies for labels have improved, most current systems have the label on the bottom.
    Some tablets may have the type and serial information label on the inside of memory door / SD card slot covers as was the case with the ThinkPad tablet type 1838/1839.
    Here is a link to an article on the support site with examples of label locations for different model Lenovo systems.   If the system will not power up at all, finding the physical label is the best course of action when contacting service.
    If the label is missing and the system will power up, there are several ways to easily find this information as it is written into the BIOS on the system board.
    1) Command Prompt
    Run an elevated command prompt, Enter the command "wmic bios get serialnumber" (without the quotations).
    2) BIOS
    Boot to BIOS (press F1 on startup) and the model type and serial number will be listed.
    3) Diagnostics - Lenovo Solution Center (LSC) or the prior Lenovo ThinkVantage toolbox.

    wmic bios get serialnumber  does not work !!!!all your pages about how to find a serial number are disfunctuional !!! What a bed service

Maybe you are looking for