How to find BAPI for Transaction Code

Hi everyone!
I'm just wondering how to get the name of the corresponding BAPI for a given transaction code - is there a way to search from within SAP?
When I open transaction "BAPI", I can create a list of BAPIs. But how can I find information about transactions - let's say XD03?

If you mean that you need to know what BAPI's a particular transaction uses, follow the below said example.
Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this.
1. Start va01 go to system-->status
2. Double click transaction VA01
3. Double click on package
4. Read the application component. (this is SD-SLS Sales)
5. Then open the transaction BAPI
6. Sales and distribution>Sales>sales order
createfromdat2
Hope this helps you to find a BAPI for a particular transaction.
Regards,
D.Veeralakshmi

Similar Messages

How to implement bapi for transaction code f-02 for multiple line items

Hi All,
I am having one requirement to of implementing bapi for tcode f-02.
I have identified the name of the badi e.i. BAPI_ACC_GL_POSTING_POST.
but i dont have any idea how implement it.
i have multiple line items for one header.
Please help me in this.
Regards,
Shoaib.

HI
In recording once u save, the recording comings out the transaction.
If u want the pop-up to display before save. Then in recording also
after entering all data and before Save press enter or do check.Try
this way after that save the transaction.
Regards,
Raghu.

BAPI for Transaction Codes FMV1 and FMZ1

hi,
is there any bapi for transaction codes FMV1 and FMZ1?!
please advice!
thanks JE

HI,
For FMZ1
use this
FMFR_CREATE_FROM_DATA
FMFR_CHANGE_FROM_DATA
FMFR_CHANGE_COMPLETION_FLAG
Regards
Hiren K.Chitalia

Do we have BAPI for Transaction code 'CX50'

Dear All,
Do we have any BAPI to execute Transaction code 'CX50'.
Thanks in advance.
Best Regards
Sreedhar

Hi,
use the following steps to find a BAPI for any transaction
1.Open transaction SE24.
2.Now open the object CL_EXITHANDLER in display mode.
3.Go to the method tab and double click on the method GET_INSTANCE.
4.Put a break point on cl_exithandler=>get_class_name_by_interface.
5.Now execute the transaction you want to find BAPI for, it will take you to the above method.
6.Write EXIT_HANDLER in fieldnames and hit enter, it will tell you the BAPI used for your transaction.
7.Hit F8 and it will tell you all the BAPIu2019s for your transaction.
Hope it helps.
Regards
Rajesh Kumar

How to find out obsolete transaction codes?

Hi,
Is there any way we can find the obsolete transaction codes in a system.
Thank you.
Regards,
Soumya

You can try using these tables.
PRGN_CORR2
RODIR.

How to create varient for transaction code

hello expert,
I created one Mod. pool program and transaction code.
while run this tcode, Save button is disable and unable to create varient.
could you please guide me hw to enable this save button and create varient. please
with best regards
srinivas

Hi,
You can create variants for transaction using transaction variants. That is meant to simplify these kinda scenarios.
The tcode for transaction variants is SHD0. You can create variants as you wish. It is simple only. No coding required. Just take SHD0. Give your transaction name.
Then press create variant.
It will guide you.
Regards,
Renjith Michael.

BAPI for Transaction code VL01NO?

Hi
Can any one suggest me the available BAPIs for the Tcode VL01NO.
Thanks in advance.
Phani.

Hi,
Check this example for how to create a delivery from an order.
PARAMETERS: p_vbeln LIKE vbak-vbeln.
DATA: BEGIN OF t_vbap OCCURS 0,
        vbeln LIKE vbap-vbeln,
        posnr LIKE vbap-posnr,
        kwmeng LIKE vbap-kwmeng,
        matnr LIKE vbap-matnr,
        werks LIKE vbap-werks,
      END OF t_vbap.
DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest
      WITH HEADER LINE.
DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems
      WITH HEADER LINE.
DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
SELECT vbeln posnr kwmeng matnr werks
       INTO TABLE t_vbap
       FROM vbap
       WHERE vbeln = p_vbeln.
LOOP AT t_vbap.
t_request-document_numb = t_vbap-vbeln.
t_request-document_item = t_vbap-posnr.
t_request-quantity_sales_uom = t_vbap-kwmeng.
t_request-id = 1.
t_request-document_type = 'A'.
t_request-delivery_date      = sy-datum.
t_request-material = t_vbap-matnr.
t_request-plant = t_vbap-werks.
t_request-date = sy-datum.
t_request-goods_issue_date = sy-datum.
t_request-goods_issue_time = sy-uzeit.
APPEND t_request.
ENDLOOP.
CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
TABLES
    request               = t_request
    createditems          = t_created
    return                = t_return
READ TABLE t_return WITH KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE e208(00) WITH 'Delivery creation error'.
ENDIF.
COMMIT WORK.
THanks,
Naren

How to find tables in transaction codes.

hi guru,
suppose i want to findout tables for mm01,xk01,t-codes.
then how can we find tables from above t-codes.
subhasis.

HI,
From the TCODE Use the menu option System-Status.
There you can see the relevent program. Double click to navigate to the program.
Then Goto the package of the program. The relevent table most probably will be there in this package.
Also if you know the table name then goto SE11 and check the where used list by restricting the search to the package.
Regards,
Sesh

Bapi for TRANSACTION CODE CO15

Dear all,
Any BAPI available for creat production order confirmation (T.CODE = CO15)
Regards
Das

Hi,
Check this function modules
BAPI_PRODORDCONF_CREATE_ACT
BAPI_PRODORDCONF_CREATE_HDR
Regards,
Dwaraka.S

BAPI for Transaction Code MIGO

Hi ,
Can i use BAPI_GOODSMVT_CREATE to create goods issue of type OTHER like the way done using the TCode MIGO?
Thanks,
Deep.

Hi,
Yes,We can create type 'Other' goods.
Please check the Documentation for the BAPI,You can get clear info.
Thanks,
Pradeep

How to find currently editing transaction code details using ABAP code

Hi,
if some user is using VA02 tcode.i want to know for which sales order(i.e Sales order number)he is making changes.
i want ABAP code sample for this scenario.
Cheers,
Jag

Hi,
              For this you need to create Lock Object from se11 .It will automatically crate Two Function modules for enque and deque.
In you case If you want to see the Details for Va02 use.
    CALL FUNCTION 'ENQUEUE_EVVBAKE'
         EXPORTING
              VBELN          = VBELN
         EXCEPTIONS
              FOREIGN_LOCK   = 1
              SYSTEM_FAILURE = 2.
    CASE SY-SUBRC.
      WHEN 1.
        MESSAGE E042(V1) WITH vbeln RAISING ERROR_IN_COPY.
    ENDCASE.
Regds,

For transaction code MD61, I want to upload data using BAPI

Hi,
for transaction code MD61, I want to upload data using BAPI.
Which BAPi I ll call ?
Can anyone suggest me how to do it with any simple example program ?

Refer the thread for details about coding-
BAPI_REQUIREMENTS_CREATE
Reards,
Amit

How to find TCodes for Config Transactions

Hi All,
How do I find the TCode for a Config Activitity node?
For example.
OX09 is for "Maintain Storage Location"
OB52 is for FI Period closing/opening
I know these from google search, but how do find tcodes for other IMG activity nodes?
Thanks in advance!

Go to SPRO and in Menu Additional Information Click Display key and IMG activity then Sytem will show the SPRO Transaction along with path
Else Go to Particular Node say Create Purchasing Group and Right Click on Node and Select Display Technical Info and in ID tab the Last four Charecters wud be the Trxn code.
In SPRO-IMG screen Only Few Nodes will Show / have the Transaction codes.

BAPI for Transaction VA01?

How to Develope an interface program to upload the sales order data from legacy system to SAP using BAPI for Transaction VA01.Explain me clearly?

VA01:
BAPI_SALESORDER_CREATEFROMDAT1
BAPI_SALESORDER_CREATEFROMDAT2
steps for bapi creation
STEP 1 - Define a structures for the BAPI
In this step a structures for the parameters and tables of the function module used for the BAPI are defined.
Use Data type -> Structure
Define the following structures:
ZBAPI_ORDER_STATUS_IMPORT which contains the following fields:
ORDERID Order number (Keyfield)
SPRAS Language
ExcludeInactive - Checkbox - Exclude inactive status
ZBAPISTAT:
STEP 2 - Write Function Module
Important notes:
Each BAPI must have its own function group.
Under the attributes tab remember to select Processing Type Remote Enabled module, otherwise the function module cannot be invoked via RFC and used as a BAPI
Import/Export parameters can only be BY VALUE for an RFC enabled function module
We are only creating one BAPI in this example, but you can create related BAPIs in the same function pool, so they will be able to share global data.
Code
Notes:
The subroutine SET_RETURN_MESSAGE is a standard routine used for BAPIs that use the BAPIRETURN structure
In form Z_BAPI_GET_ORDER_SYSTEM_STATUS there is a test IF 1 = 2. If the test is true a message is displayed. The condition will obviously never be true, and we will never want to display a message in a BAPI. The reason why it is included is, that it create a reference for the message, so that the WHERE USED functionality can be used for the message. This is the SAP standard way to handle it, copied from the Company Code GetList BAPI.
INCLUDE LZBAPISTATUSUXX
THIS FILE IS GENERATED BY THE FUNCTION LIBRARY.             *
NEVER CHANGE IT MANUALLY, PLEASE!                           *
INCLUDE LZBAPISTATUSU02.
                    "Z_BAPI_GET_ORDER_SYSTEM_STATUS
INCLUDE LZBAPISTATUSTOP - Global data
FUNCTION-POOL ZBAPISTATUS.                  "MESSAGE-ID Z3
Types:
begin of Type_tj02t,
    istat like tj02t-istat,
    txt04 like tj02t-txt04,
    txt30 like tj02t-txt30,
end of type_tj02t.
DATA:
Declarations for TABLE parameter
T_BAPISTAT like ZBAPISTAT occurs 0,
G_BAPISTAT like ZBAPISTAT,
Table for object texts
t_tj02t    type type_tj02t occurs 0,
g_tj02t    type type_tj02t.
Structure for return messages
DATA:
BEGIN OF MESSAGE,
    MSGTY LIKE SY-MSGTY,
    MSGID LIKE SY-MSGID,
    MSGNO LIKE SY-MSGNO,
    MSGV1 LIKE SY-MSGV1,
    MSGV2 LIKE SY-MSGV2,
    MSGV3 LIKE SY-MSGV3,
    MSGV4 LIKE SY-MSGV4,
END OF MESSAGE.
INCLUDE LZBAPISTATUSF01 - Subroutines
***INCLUDE LZBAPISTATUSF01 .
*&      Form SET_RETURN_MESSAGE
This routine is used for setting the BAPI return message.
The routine is a standard routine for BAPIs that handles the message
structure for the BAPIRETURN structure. It has been copied from the
BAPI Company Code Getlist
     -->P_MESSAGE text
     <--P_RETURN text
form SET_RETURN_MESSAGE USING    VALUE(P_MESSAGE)   LIKE MESSAGE
                        CHANGING P_RETURN LIKE BAPIRETURN.
CHECK NOT MESSAGE IS INITIAL.
CALL FUNCTION 'BALW_BAPIRETURN_GET'
       EXPORTING
            TYPE       = P_MESSAGE-MSGTY
            CL         = P_MESSAGE-MSGID
            NUMBER     = P_MESSAGE-MSGNO
            PAR1       = P_MESSAGE-MSGV1
            PAR2       = P_MESSAGE-MSGV2
            PAR3       = P_MESSAGE-MSGV3
            PAR4       = P_MESSAGE-MSGV4
         LOG_NO     = ' '
         LOG_MSG_NO = ' '
       IMPORTING
            BAPIRETURN = P_RETURN
       EXCEPTIONS
            OTHERS     = 1.
endform.                    " SET_RETURN_MESSAGE
FUNCTION Z_BAPI_GET_ORDER_STATUS
FUNCTION z_bapi_get_order_system_status.
""Local interface:
*" IMPORTING
*"     VALUE(I_AUFNR) TYPE AUFNR
*"     VALUE(I_SPRAS) TYPE SPRAS DEFAULT SY-LANGU
*"     VALUE(I_EXCLUDEINACTIVE) TYPE CHAR1 OPTIONAL
*" EXPORTING
*"     VALUE(RETURN) TYPE BAPIRETURN
*" TABLES
*"      T_BAPISTAT STRUCTURE ZBAPISTAT
DATA:
   l_aufnr LIKE afko-aufnr,
   l_objnr LIKE jest-objnr.
Check if order exists
SELECT SINGLE aufnr
    FROM afko
    INTO l_aufnr
    WHERE aufnr = BAPI_ORDER_STATUS_IMPORT-orderid.
IF sy-subrc NE 0.
    CLEAR message.
    message-msgty = 'E'.
    message-msgid = 'Z3'.
    message-msgno = '000'.
    message-msgv1 = BAPI_ORDER_STATUS_IMPORT-orderid.
    PERFORM set_return_message USING    message
                               CHANGING return.
    IF 1 = 2.
    The only reason to include this statement, that will obviously
    never execute, is that it will create a referecence so that you
    can find out where a particular message is being used. This
    functionality is used by the BAPIs programmed by SAP
      MESSAGE e000(z3).
    ENDIF.
ENDIF.
CHECK return IS INITIAL.
Read order status
CONCATENATE 'OR' BAPI_ORDER_STATUS_IMPORT-orderid INTO l_objnr.
IF BAPI_ORDER_STATUS_IMPORT-i_excludeinactive = 'X'.
    SELECT objnr stat inact
      FROM jest
      INTO TABLE t_bapistat
      WHERE objnr = l_objnr AND
            inact 'X'.
ELSE.
    SELECT objnr stat inact
      FROM jest
      INTO TABLE t_bapistat
      WHERE objnr = l_objnr.
ENDIF.
IF sy-subrc 0.
No object status found
    CLEAR message.
    message-msgty = 'E'.
    message-msgid = 'Z3'.
    message-msgno = '001'.
    message-msgv1 = BAPI_ORDER_STATUS_IMPORT-orderid.
    PERFORM set_return_message USING    message
                               CHANGING return.
    IF 1 = 2.
      MESSAGE e001(z3).
    ENDIF.
ENDIF.
CHECK return IS INITIAL.
Read order status texts
SELECT istat txt04 txt30
    FROM tj02t
    INTO TABLE t_tj02t
    FOR ALL ENTRIES IN t_bapistat
    WHERE istat = t_bapistat-stat AND
          spras = BAPI_ORDER_STATUS_IMPORT-i_spras.
SORT t_tj02t BY istat.
LOOP AT t_bapistat INTO g_bapistat.
    READ TABLE t_tj02t
      WITH KEY istat = g_bapistat-stat BINARY SEARCH
     INTO g_tj02t.
    IF sy-subrc = 0.
      MOVE:
        g_tj02t-txt04 TO g_bapistat-txt04,
        g_tj02t-txt30 TO g_bapistat-txt30.
      MODIFY t_bapistat FROM g_bapistat TRANSPORTING txt04 txt30.
    ENDIF.
ENDLOOP.
ENDFUNCTION.
OBJNR like JEST-OBJNR
STAT like JEST-STAT
INACT like JEST-INACT
TXT04 like TJ02T-TXT04
TXT30 likeTJ02T-TXT30
Important note:
You will have to define a structure for every parameter in the BAPI. You cannot use the same structures used in existing applications because BAPI structures are frozen when BAPIs are released and then there are restrictions on changing them.
STEP 3 - Create the API Method Using the BAPI WIZARD
The BAPI wizard is used toTo expose the remote function module as a BAPI. The wizard will generate some additional code, so the function module is a valid method of the BOR. This allows the BAPi to be called as a workflow method in addition to be called by an outside program.
Note: Each function module corresponds to a method in the BOR
Go to the Business Object Builder SWO1.
You can either create the new Object type as a subtype of an existing business object or create a new business object from scratch. In this example it would be obvious to create the Object type as a subtype of BUS2005 Production order. However, to illustrate how to create a new Object type from scratch, we will do this.
In the Object/Interface type field write the name of the new Business Object: ZORDERSTAT. Press enter and fill in the additional fields necessary to create the object type.
Supertype: Not relevant because we are creating our object from scratch
Program. This is the name of the program where the wizard generates code for the Object type, NOT the function module we created earlier. The program name must not be the name of an existing program.
Press enter and create the new business object. Note that when you create the business object a standard interface, an attribute ObjectType and the methods ExistenceCheck and Display are automatically generated. These cannot be changed !
The next step is to add the Z_BAPI_GET_ORDER_STATUS method to the business object. Select Utilities -> API methods -> Add method and write the name of the function module in the dialog box. Next the dialog ox show below will be shown. This is the start screen of the BAPI wizard. Proceed with wizard by pressing the button.
After you have finished the wizard, you will notice that the ZGetOrderStatus has been added to the business object:
You can double-click on the method to see its properties. To use the business object you must change the Object type status to Implemented. Use menu Edit->Change releases status->Object type->To implemented. No you can test the object (Press F8).
Note that the BAPI wizard has added a wrapper class for the function module so it can be sued as method in the business object. Choose menu Goto->Program to display the program:
          Implementation of object type ZORDERSTAT           *****
INCLUDE <OBJECT>.
BEGIN_DATA OBJECT. " Do not change.. DATA is generated
only private members may be inserted into structure private
DATA:
" begin of private,
"   to declare private attributes remove comments and
"   insert private attributes here ...
" end of private,
      KEY LIKE SWOTOBJID-OBJKEY.
END_DATA OBJECT. " Do not change.. DATA is generated
BEGIN_METHOD ZGETORDERSTATUS CHANGING CONTAINER.
DATA:
      BAPIORDERSTATUSIMPORT LIKE ZBAPI_ORDER_STATUS_IMPORT,
      RETURN LIKE BAPIRETURN,
      TBAPISTAT LIKE ZBAPISTAT OCCURS 0.
SWC_GET_ELEMENT CONTAINER 'BapiOrderStatusImport'
       BAPIORDERSTATUSIMPORT.
SWC_GET_TABLE CONTAINER 'TBapistat' TBAPISTAT.
CALL FUNCTION 'Z_BAPI_GET_ORDER_STATUS'
    EXPORTING
      BAPI_ORDER_STATUS_IMPORT = BAPIORDERSTATUSIMPORT
    IMPORTING
      RETURN = RETURN
    TABLES
      T_BAPISTAT = TBAPISTAT
    EXCEPTIONS
      OTHERS = 01.
CASE SY-SUBRC.
    WHEN 0.            " OK
    WHEN OTHERS.       " to be implemented
ENDCASE.
SWC_SET_ELEMENT CONTAINER 'Return' RETURN.
SWC_SET_TABLE CONTAINER 'TBapistat' TBAPISTAT.
END_METHOD.
STEP 4 - Final stepsWhen the Business object has been checked and the documentation created, the following steps must be carried out:
Release the BAPI function module (in the Function Builder).
Release the business object type (in the BOR ObjectType -> Change release status to -> Implemented ).
Release the BAPI as a method in the BOR (Release the methods you has created - Set the cursor on the method then
Edit -> Change release status -> Object type component -> To released )
For potential write BAPIs: Release the IDoc and its segments
You can now display the BAPI in the BAPI Explorer:
for detailed expalnation
http://www.erpgenie.com/abap/bapi/example.htm
do reward if helpful

How to find out the Transactions used per month & the USER who used that

Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.

You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type          : Report                                 *
*****& Title                 : Z_ABAP_TCODE_MONITOR                   *
*****& Transaction code      : ZTCODE_USAGE                           *
*****& Developer name        : Shailendra Kolakaluri                  *
*****& Deveopment start date : 26 th Dec 2011                         *
*****& Development Package   : ZDEV                                   *
*****& Transport No          : DEVK906086                                       *
*****& Program Description   : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
      fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      layout TYPE slis_layout_alv,
      variant TYPE disvariant,
      events TYPE slis_t_event WITH HEADER LINE,
      heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date   TYPE swncdatum,
user   TYPE swncuname,
mandt     TYPE swncmandt,
tcode     TYPE swnctcode,
report TYPE swncreportname,
count     TYPE swncshcnt,
END OF zusertcode.
*data   : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
      wa_usertcode TYPE swncaggusertcode,
      wa           TYPE zusertcode,
      t_ut         TYPE STANDARD TABLE OF zusertcode,
      wa_result    TYPE zusertcode,
      t_result     TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
    EXPORTING
      component     = 'TOTAL'
      ASSIGNDSYS    = 'DEV'
      periodtype    = 'M'
      periodstrt    = month
    TABLES
      usertcode     = t_usertcode
    EXCEPTIONS
      no_data_found = 1
      OTHERS        = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
    wa-user = wa_usertcode-account.
    IF wa_usertcode-entry_id+72 = 'T'.
      wa-tcode = wa_usertcode-entry_id.
      wa-report = space.
    ELSE.
      wa-tcode = space.
      wa-report = wa_usertcode-entry_id.
    ENDIF.
    COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'DATE'.
fcat-seltext_l   = 'Date'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'MANDT'.
fcat-seltext_l   = 'Client'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'USER'.
fcat-seltext_l   = 'User Name'.
fcat-key         = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname     = 't_ut'.
fcat-fieldname   = 'TCODE'.
fcat-seltext_l   = 'Transaction Code'.
fcat-key         = 'X'.
APPEND fcat.
ENDFORM.
*&      Form SET_LAYOUT
      text
--> p1        text
<-- p2        text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM.                    " SET_LAYOUT
*&      Form GET_EVENT
      text
--> p1        text
<-- p2        text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM.                    " GET_EVENT
**&      Form GET_COMMENT
      text
--> p1        text
<-- p2        text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM.                    " GET_COMMENT
**&      Form top_of_page
      text
--> p1        text
<-- p2        text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     it_list_commentary       = heading[]
I_LOGO                   =
I_END_OF_LIST_GRID       =
*ENDFORM.                    " top_of_page
*&      Form DISPLAY_DATA
      text
--> p1        text
<-- p2        text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-cprog
      is_layout          = layout
      it_fieldcat        = fcat[]
      i_save             = 'A'
      is_variant         = variant
      it_events          = events[]
    TABLES
      t_outtab           = t_ut
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " DISPLAY_DATA

How to find BAPI for Transaction Code

Similar Messages

Maybe you are looking for