How to find in SCCM 2012, Which(sccm admin) deployed Application on machines.

Hi,
Looking log files, to find who(sccm 2012 admin) deployed applications on machines.
Deployment has been deleted from console, However in database it is shwoing number of machines having with particular application.
Some sccm 2012 admin deployed application on machines by mistake, how to check from server or client logs, who(sccm admin) deployed application on machines.
Please let me, if anyone know about this.

Likely would want to run the "Deployments Created, Modified, or Deleted" status message query ":-)
Wally Mead
Wally is right but watch out for these status message, I have not check in CM12 yet but in CM07 just open and click "ok" to close the package/ advert/ etc. would create a status message saying it was modified.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

SCCM 2012 and SCCM 2007 Shared Distribution Points

I am building a new SCCM 2012 site (primary and 4 secondaries) besides a SCCM 2007 site (primary, 3 secondaries and 65 DPs).
I migrated all objects from SCCM 2007 to SCCM 2012 which worked well.
I migrated a client from SCCM 2007 to my SCCM 2012 environment and that worked well. Then i push some packages from SCCM 2012 to my migrated client which worked as well either.
Then I switch on the SHARED DISTRIBUTION option in the migration section and now my migrated SCCM 2012 client only can access the SCCM 2007 DPs and packages from SCCM 2012 DP can't be accessed anymore...in Software Center the packages will stay at 0% downloading....
Is that normal behavior after enabling shared DPs ?

Did you ever find a solution for this? I am experiencing the same issue.
I have an IP address range boundary for testing SCCM 2012. After enabling shared distribution option SCCM 2012 migrated boundaries from SCCM 2007. My test IP address range boundary has two boundary groups... One is the SCCM 2012 Boundary group
pointing towards the SCCM 2012 DPs. The 2nd is the automatically created "Boundary Group for SCCM 2007 distribution point."
With both of those in there I can only push SCCM 2007 packages to the SCCM 2012 clients. SCCM 2012 packages come back in the logs as "Calling back with empty distribution points list." If I remove the automatically created "Boundary Group for SCCM 2007 distribution
point" from the test IP boundary then SCCM 2012 clients will properly download from the SCCM 2012 DPs, but now the SCCM 2007 packages fail to download to the SCCM 2012 test clients.
I assume I have some kind of boundary issue but am at a loss of resolving it. Either that or I have the shared dp concept down incorrectly. Shouldn't I be able to have a boundary that has SCCM 2012 clients that uses the 2012 DP for 2012 content but the 2007
DP for 2007 content while I am migrating?
Thanks for any help
- Ryan

Cross Forset Migration from sccm 2012 to sccm 2012RS

Hi all,<o:p></o:p>
We have a plan to migrate
sccm 2012 to sccm 2012 R2 on trusted forest (cross forest migration)<o:p></o:p>
Please share possibility...<o:p></o:p>
Thanks, Mariappan Shanmugavel

Possibility for what?
Migration only works from ConfigMgr 2007 SP2 or from the same version of ConfigMgr 2012 thus will not be able to migrate from 2012 to 2012 R2. You will need to upgrade your 2012 site to 2012 R2 first and then perform the migration. The TechNet docs clearly
show this: http://technet.microsoft.com/en-us/library/gg699364.aspx
ANd, as Torsten pointed out, if you are simply planning on moving the existing site server, that isn't supported and won't work either.
Jason | http://blog.configmgrftw.com | @jasonsandys

Is there any report in SCCM 2012 to list out all the physcial machine and all the virtual machine?

Is there any report in SCCM 2012 to list out all the physcial machine and all the
virtual machine?
and list all VMs for each physical server.

Hi,
there is no such builtin report but you can easily crete one as all information is in the database.
http://www.scconfigmgr.com/2014/01/24/create-custom-reports-for-configmgr-2012-with-report-builder/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

SCCM 2012 - Project 2010 Standard deployment failed with error 1603

Hi everyone,
I’m in the progress to roll out a software deployment via SCCM 2012, it’s to remove the current Project 2010 Professional we installed and reinstall the Standard version. We got a task sequence for the job, which is Reboot>Un-install Project 2010 Pro>Reboot>Install
Project 2010 Std.
The Un-installation process uses this command: setup.exe /uninstall PrjPro /config "PrjPro.WW\uninstall.xml"
The Installation process uses this command: setup.exe /adminfile project_silent_install.MSP
But the deployment result is quite random, some of the PCs would succeed without any issue, some of them with fail at the installation process with 1708/1603 error. As far as I know we use standard Win 7 64bits SOE across the environment, so everyone should
have same system baseline.
I reviewed some of the failed Project 2010 Standard installation logs as it shows the following:
Executing chained package: PrjStdWW
05/09/2014 20:16:14 Installing chained package: PrjStdWW
PERF: TickCount=530512 Name=Verify MSI local install source Description=Begin function
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
LIS: wait for package "{90140000-003A-0000-0000-0000000FF1CE}" to complete caching
LIS: package "{90140000-003A-0000-0000-0000000FF1CE}" caching completed
PERF: TickCount=530528 Name=Completed verify local install source Description=End function
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Use Shell UI transform : LIS\{90140000-0115-0409-0000-0000000FF1CE}\ShellUI.MST
Current transform is at path: LIS\{90140000-0115-0409-0000-0000000FF1CE}\ShellUI.MST
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
Using transform at path: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\ShellUI.MST
Catalyst Package Install...
Package: PrjStdWW
File: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi
Command Line: PATCH="\\SCCM2012\SMSPKGE$\PC100139\project_silent_install.MSP" ADDLOCAL=C.35347883.0E64.45B4.88A0.1881DE05E259,OSpp_Core,Project_PIA,SetupExeArpEntry,Office10Fix1,ProductFiles,InternationalSupportFiles_JPN,AceFiles,IMNFiles,OfficeIntlRDC,AceOdbc,OArt_DocTheme,OSetupController,WISPFiles,TCDRegistration,SetLanguageFiles,TCWorks7Files,ClviewFiles,VBAFiles,OfficeAppSupport,TextConverters,ProductNonBootFiles,dummy_Office_PIA,CAGOffice10,VSCommonPIAHidden,WebDiscussFiles,CAGCat10,CAGCat10Clips,MsoInstalledPackagesScoped,WxpFiles,SetupControllerFiles,Forms_PIA,dummy_MSCOMCTL_PIA,AlwaysInstalled,Gimme_OnDemandData,AceRepl,OISFiles,OfficeOLESupport,OfficeMSProof6,CAGFiles,InternationalSupportFiles_ArialUni,OSpp,Ace_PIA,GraphicsFiltersFile,WebDriveFiles,PROJECTFiles,ProductFiles_B2TR,SetupXmlFiles,OfficePostBoot,DocumentImagingUtils,VSTOCLR35,CAGCategoryFiles,ProjectCommon,VSTO,ProofingParent,MsoCommonShellHandler,OfficeDigitalSFiles,CARegistryFeature,OfficeCoreRDC,SetupExeAddRegistry,NonC2R_ProductFiles,MSSOAP3,TranslationCore,CAGOffice10Clips REMOVE=WISPHidden ARPENTRY_NOMODIFY="#0" ARPENTRY_MODIFYPATH="""C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe"" /modify PRJSTD /dll OSETUP.DLL" INSTALLLOCATION="C:\Program Files (x86)\Microsoft Office\" SLD_OEMPIDKEY="0" ARPENTRY_NOELEVATEONMODIFY="#0" SETUP_REBOOT="never" COMPANYNAME=" " ARPENTRY_SKUCOMPONENTS="[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Office.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Proofing.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Project.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Office64.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\PRJSTD\setup.xml[~]" ARPENTRY_HELPLINK="" ARPENTRY_DISPLAYICON="C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\OSETUP.DLL,1" ARPENTRY_DISPLAYNAME="Microsoft Project Standard 2010" ACCEPTEDEULA="1" ARPENTRY_DISPLAYVERSION="14.0.4763.1000" BRANDING_XML="C:\Windows\TEMP\Setup00001048\BRANDING.XML" SLD_SUPPORTSBYPASS="0" SLD_ACID="5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE" SLD_TRIALTYPE="0" ARPENTRY_PACKAGEREFS="[~]OfficeMUISet.en-us[~]OfficeMUI.en-us[~]Proofing.en-us[~]Proof.en-us[~]Proof.es-es[~]Office64MUISet.en-us[~]PrjStdWW[~]Office64WW[~]Office64MUI.en-us[~]ProjectMUI.en-us[~]Proof.fr-fr[~]" SLD_DPID="#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en-US" ARPENTRY_SHELLUITRANSFORMLANGUAGE="en-US" USERNAME=" " ARPENTRY_CONTACT="" ARPENTRY_HELPTELEPHONE="" ARPENTRY_PRODUCTCODES="[~]{90140000-00B4-0409-0000-0000000FF1CE}[~]{90140000-002C-0409-0000-0000000FF1CE}[~]{90140000-003A-0000-0000-0000000FF1CE}[~]{90140000-002A-0000-1000-0000000FF1CE}[~]{90140000-001F-0C0A-0000-0000000FF1CE}[~]{90140000-001F-0409-0000-0000000FF1CE}[~]{90140000-001F-040C-0000-0000000FF1CE}[~]{90140000-0115-0409-0000-0000000FF1CE}[~]{90140000-006E-0409-0000-0000000FF1CE}[~]{90140000-002A-0409-1000-0000000FF1CE}[~]{90140000-0116-0409-1000-0000000FF1CE}[~]" ARPENTRY_INSTALLLOCATION="C:\Program Files (x86)\Microsoft Office\" SETUPEXE_DOARPWRITE="1" ACIDS="11B39439-6B93-4642-9570-F2EB81BE2238;5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE;B6E9FAE1-1A0E-4C61-99D0-4AF068915378" ARPENTRY_SPPSKUID="[~]5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE[~]" ARPENTRY_NOREMOVE="#0" SLD_PKU="0" SLD_PID="82503-001-0000106-49615" LICTYPE="ltKMS" ARPENTRY_UNINSTALLSTRING="""C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe"" /uninstall PRJSTD /dll OSETUP.DLL" ARPENTRY_NOREPAIR="#1" ARPENTRY_URLUPDATEINFO="" ARPENTRY_URLINFOABOUT="" REMOVEPREVIOUS="" ARPENTRY_CACHELOCATION="C:\MSOCache\All Users" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\" ARPSYSTEMCOMPONENT=1 TRANSFORMS="C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\ShellUI.MST" ALLUSERS="1"
PERF: TickCount=530543 Name=MsiPackage::Install Description=Calling OMsiInstaller::InstallProduct for package file "C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Error: Failed to install product: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi ErrorCode: 1603(0x643).
Log level changed from: Standard to: Verbose
Rolling back chain
05/09/2014 20:18:47 Rolling back package: PrjStdWW
There appears to be no rollback work to do for package: PrjStdWW path: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi
05/09/2014 20:18:47 Rolling back package: Office64WW
Package Office64WW was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64WW
File: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\Office64WW.msi
Command Line: ADDLOCAL=AcePiaReg64,VSTO64,WordXmlEditVerb64,ExcelXmlEditVerb64,GrooveShellIntegration64,Project64Files,OSpp64_Core,ExcelPiaReg64,GraphPiaReg64,FormsPiaReg64,SmartTagPiaReg64,PPTXmlEditVerb64,MsoInstalledPackagesScoped,OfficeExample64bitFilesA,WAC_XmlEditVerb64SPD,SetupXmlFiles,WordPiaReg64,Outlook64Files,AlwaysInstalled64,VBEPiaReg64,VisioPiaReg64,Outlook64SearchShellReg,OneNote64Files,SetupControllerFiles,ProjectPiaReg64,SearchFilters64Files,OutlookPiaReg64,Gimme_OnDemandData,Visio64ShapeSearch,WAC_PIARegSPD64,ProductNonBootFiles64,XDocsPiaReg64,PublisherPiaReg64,OneNotePIAReg64,ProductFiles64,OfficeExample64bitFilesB,OfficePiaReg64,Visio64Files,TCDRegistration64,OSpp64,XDOCSFiles64,XDocsXmlEditVerb64,MsoCommonShellHandler64bit,AccessPiaReg64,PowerPointPiaReg64 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64WW ProductCode:{90140000-002A-0000-1000-0000000FF1CE}
05/09/2014 20:18:56 Rolling back package: ProjectMUI.en-us
Package ProjectMUI.en-us was installed in the chain... uninstalling as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Install Rollback (uninstall)...
Package: ProjectMUI.en-us
Product Code: {90140000-00B4-0409-0000-0000000FF1CE}
Command Line: REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back install of package: ProjectMUI.en-us path:C:\MSOCache\All Users\{90140000-00B4-0409-0000-0000000FF1CE}-C\ProjectMUI.msi
05/09/2014 20:19:00 Rolling back package: Proofing.en-us
Package Proofing.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proofing.en-us
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proofing.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proofing.en-us ProductCode:{90140000-002C-0409-0000-0000000FF1CE}
05/09/2014 20:19:04 Rolling back package: Proof.en-us
Package Proof.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.en-us
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.en\Proof.msi
Command Line: ADDLOCAL=FindAllWordFormsFiles_1033,Gimme_OnDemandData,SpellingAndGrammarFiles_1033,ThesaurusFiles_1033,MsoInstalledPackagesScopedIntl_1033,HyphenationFiles_1033,OCR_1033,SetupControllerFiles,SetupXmlFiles REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.en-us ProductCode:{90140000-001F-0409-0000-0000000FF1CE}
05/09/2014 20:19:05 Rolling back package: Proof.fr-fr
Package Proof.fr-fr was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.fr-fr
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.fr\Proof.msi
Command Line: ADDLOCAL=MsoInstalledPackagesScopedIntl_1036,Gimme_OnDemandData,SpellingAndGrammarFiles_1036,SetupControllerFiles,FindAllWordFormsFiles_1036,TranslationFiles_1036,ThesaurusFiles_1036,HyphenationFiles_1036,SetupXmlFiles,OCR_1036 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.fr-fr ProductCode:{90140000-001F-040C-0000-0000000FF1CE}
05/09/2014 20:19:11 Rolling back package: Proof.es-es
Package Proof.es-es was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.es-es
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.es\Proof.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SpellingAndGrammarFiles_3082,OCR_3082,FindAllWordFormsFiles_3082,HyphenationFiles_3082,ThesaurusFiles_3082,MsoInstalledPackagesScopedIntl_3082,SetupControllerFiles,SetupXmlFiles,TranslationFiles_3082 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.es-es ProductCode:{90140000-001F-0C0A-0000-0000000FF1CE}
05/09/2014 20:19:12 Rolling back package: Office64MUISet.en-us
Package Office64MUISet.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64MUISet.en-us
File: C:\MSOCache\All Users\{90140000-0116-0409-1000-0000000FF1CE}-C\Office64MUISet.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64MUISet.en-us ProductCode:{90140000-0116-0409-1000-0000000FF1CE}
05/09/2014 20:19:19 Rolling back package: Office64MUI.en-us
Package Office64MUI.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64MUI.en-us
File: C:\MSOCache\All Users\{90140000-0116-0409-1000-0000000FF1CE}-C\Office64MUI.msi
Command Line: ADDLOCAL=OfficeExample64bitFilesBIntl_1033,OfficeExample64bitFilesAIntl_1033,Gimme_OnDemandData,Outlook64SearchShellRegIntl_1033,ProductFilesIntl64_1033,MsoInstalledPackagesScopedIntl_1033,OneNoteToLinkedNotesIEAddin64Intl_1033,GrooveFiles64Intl_1033,SetupControllerFiles,SetupXmlFiles REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64MUI.en-us ProductCode:{90140000-002A-0409-1000-0000000FF1CE}
05/09/2014 20:19:20 Rolling back package: OfficeMUISet.en-us
Package OfficeMUISet.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: OfficeMUISet.en-us
File: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\OfficeMUISet.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: OfficeMUISet.en-us ProductCode:{90140000-0115-0409-0000-0000000FF1CE}
05/09/2014 20:19:20 Rolling back package: OfficeMUI.en-us
Package OfficeMUI.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: OfficeMUI.en-us
File: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\OfficeMUI.msi
Command Line: ADDLOCAL=MetricConverterIntl_1033,AlwaysInstalledIntl_1033,MSTagPluginStockFilesIntl_1033,WebDiscussFilesIntl_1033,GraphicsFiltersPNGFilesIntl_1033,EquationEditorFilesIntl_1033,GraphicsFiltersEPSFilesIntl_1033,MSTagPluginNamesFilesIntl_1033,TCWP5FilesIntl_1033,CAGOffice10Intl_1033,OISFilesIntl_1033,WxpFilesIntl_1033,XDOCSEditorFilesIntl_1033,CAGFilesIntl_1033,WISPHiddenIntl_1033,CAGCat10Intl_1033,SetLanguageFilesIntl_1033,OSetupControllerIntl_1033,MsoInstalledPackagesScopedIntl_1033,TCRecoverFilesIntl_1033,SetupControllerFiles,ClviewFilesIntl_1033,GraphHelpFilesIntl_1033,ProductNonBootFilesIntl_1033,MSTagPluginPlacesFiles_1033,VisioPreviewerIntl_1033,ProductFilesIntl_1033,AceReplIntl_1033,GraphicsFiltersCGMFilesIntl_1033,GraphicsFiltersWPGFilesIntl_1033,Gimme_OnDemandData,TCWP6FilesIntl_1033,GraphicsFiltersGIFFilesIntl_1033,GRAPHFilesIntl_1033,MSTagPluginDateFilesIntl_1033,WebDriveFilesIntl_1033,LOBiFilesIntl_1033,LISTFilesIntl_1033,UICaptionsCompanionIntl_1033,SetupXmlFiles,AceFilesIntl_1033,TOOLSFilesIntl_1033,MSSOAP3Intl_1033,VBAHelpFilesIntl_1033,GraphicsFiltersPICTFilesIntl_1033,OfficeDigitalSFilesIntl_1033,VBAFilesIntl_1033,GraphicsFiltersJPEGFilesIntl_1033,QueryFilesIntl_1033,SetLanguageHelpFilesIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: OfficeMUI.en-us ProductCode:{90140000-006E-0409-0000-0000000FF1CE}
Error attaching to OSE, error 0x00000000
Stopping running ose
LIS: start uncaching for download "{90140000-002C-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-002C-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-003A-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-003A-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-00B4-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-00B4-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-0115-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-0115-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-0116-0409-1000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-0116-0409-1000-0000000FF1CE}-C"
Error attaching to OSE, error 0x00000000
Stopping running ose
SystemRestore : Attempting to cancelling System-Restore-Point for Product [Microsoft Project Standard 2010] (with RestorePointType [0, Installed]).
SystemRestore : Successfully cancelled System-Restore-Point for Product [Microsoft Project Standard 2010] (with RestorePointType [0, Installed]).
Not showing completion dialog because it was not requested.
Catalyst execution finished: 05/09/2014 20:19:25. Return code: 1603.
PERF: TickCount=722128 Name=RunSetup Description=End function
Can onyone enlighten me what's went wrong, and why did I get this inconsitent installation behaviour?
Thank you very much!!!

1603 means there is a fatal error during installation process.
Take a look at the article below. It may help on finding cause.
Hi Juke,
I did do fair a bit of Googling before I started the post. I have increased the logging level on one of the machines failed on the installation. Apparently Project installation log doesn't throw the "return value 3", I think it's pointing to a particular
updating item, anyone knows what is it?
Microsoft Office Project Standard 2010 - Update '{35347883-0E64-45B4-88A0-1881DE05E259}' could not be installed.
The following is the detailed installation log.
MSI (s) (8C:B4) [20:31:33:122]: Executing op: SetTargetFolder()
MSI (s) (8C:B4) [20:31:33:122]: Executing op: FontRegister(Title=Arial Unicode MS (TrueType),File=ARIALUNI.TTF)
MSI (s) (8C:B4) [20:31:33:122]: SHELL32::SHGetFolderPath returned: C:\WINDOWS\Fonts
MSI (s) (8C:B4) [20:31:33:122]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0)
MSI (s) (8C:B4) [20:31:33:122]: Error in rollback skipped. Return: 5
MSI (s) (8C:B4) [20:31:33:746]: Entering MsiProvideAssembly. AssemblyName: Policy.12.0.Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:746]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:777]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:777]: Entering MsiProvideAssembly. AssemblyName: Policy.11.0.Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:777]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:808]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:808]: Entering MsiProvideAssembly. AssemblyName: Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:808]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:840]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:840]: Note: 1: 2318 2:
MSI (s) (8C:B4) [20:31:33:840]: No System Restore sequence number for this installation.
MSI (s) (8C:B4) [20:31:33:840]: Unlocking Server
MSI (s) (8C:B4) [20:31:33:980]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Note: 1: 2262 2: InstallExecuteSequence 3: -2147287038
MSI (s) (8C:B4) [20:31:34:011]: Product: Microsoft Office Project Standard 2010 - Update '{35347883-0E64-45B4-88A0-1881DE05E259}' could not be installed. Error code 1603. Additional information is available in the log file C:\WINDOWS\TEMP\MSI1f79e.LOG.
MSI (s) (8C:B4) [20:31:34:011]: Windows Installer installed an update. Product Name: Microsoft Office Project Standard 2010. Product Version: 14.0.4763.1000. Product Language: 0. Manufacturer: Microsoft Corporation. Update Name: {35347883-0E64-45B4-88A0-1881DE05E259}. Installation success or error status: 1603.
MSI (s) (8C:B4) [20:31:34:011]: Note: 1: 1708
MSI (s) (8C:B4) [20:31:34:011]: Product: Microsoft Office Project Standard 2010 -- Installation operation failed.
MSI (s) (8C:B4) [20:31:34:011]: Windows Installer installed the product. Product Name: Microsoft Office Project Standard 2010. Product Version: 14.0.4763.1000. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202cf.msp
MSI (s) (8C:B4) [20:31:34:011]: Unable to delete the file. LastError = 32
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202d0.mst
MSI (s) (8C:B4) [20:31:34:011]: Unable to delete the file. LastError = 32
MSI (s) (8C:B4) [20:31:34:011]: Deferring clean up of packages/files, if any exist
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202cf.msp
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202d0.mst
MSI (s) (8C:B4) [20:31:34:011]: MainEngineThread is returning 1603
MSI (s) (8C:24) [20:31:34:011]: No System Restore sequence number for this installation.
MSI (s) (8C:24) [20:31:34:011]: User policy value 'DisableRollback' is 0
MSI (s) (8C:24) [20:31:34:011]: Machine policy value 'DisableRollback' is 0
MSI (s) (8C:24) [20:31:34:011]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (8C:24) [20:31:34:011]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:24) [20:31:34:011]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:24) [20:31:34:027]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (8C:24) [20:31:34:027]: Restoring environment variables
MSI (s) (8C:24) [20:31:34:027]: Destroying RemoteAPI object.
MSI (s) (8C:48) [20:31:34:027]: Custom Action Manager thread ending.
MSI (c) (F4:1C) [20:31:34:027]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (F4:1C) [20:31:34:027]: MainEngineThread is returning 1603
=== Verbose logging stopped: 7/05/2014 20:31:34 ===

SCCM 2012 R2 - Management Point deployment to untrusted domain

Hi all,
we've got two domains in our environment which have no trust relationship. I have sccm 2012 r2 installed on a Windows 2012 R2 server in the larger domain
and have just installed a DP and MP on a Windows 2008 R2 server in the second, smaller domain. The Management Point installed ok according to mpmsi.log but the problem i'm having is that the mpcontrol.log is now repeatedly throwing up the following message:
Call to HttpSendRequestSync failed for port 80 with status code 500, text:Internal Server Error
On the dp/mp server in the smaller domain i can browse to http://sccm-dp1/ ok. I can also browse to http://sccm-dp1/sms_mp/.sms_aut?MPCert ok. I cannot
browse to http://sccm-dp1/sms_mp/.sms_aut?MPList (receive a HTTP 500 error).
In additon to this, every now and again the MP tries to connect to the SQL DB in the other domain. This fails with the following errors:
MPStart(): RegisterWithWINS() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
CMPControlManager::PublishInDNS: DnsReplaceRecordsInSet() failed with status 9002.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
MPStart(): PublishInDNS() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
EnableBranchCache(): configuration has not been changed.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
MPStart(): EnableBranchCache() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
Successfully Registered for IP Address Change notifications.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
MPStart(): RegisterForIPAddressChangeNotification() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
Attempting to register the SQL connection type for the configured SQL database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
Registered connection type for SQL Server 'xxxxxxxxx' and database 'xxxx\xxx_xxx'.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
MPStart(): RegisterSqlDatabaseConnectionType() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
Checking the current CLR Enabled configuration setting for the configured SQL Server hosting the database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04 1924 (0x0784)
Getting the CLR Enabled value from the configured SQL database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
Attempting to connect to the configured SQL database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
Impersonating using the SQL connection account; user name is now 'xxxxxxxxx'.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:23:04
1924 (0x0784)
*** [08001][10060][Microsoft][SQL Server Native Client 11.0]TCP Provider: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to
respond.        SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
*** [HYT00][0][Microsoft][SQL Server Native Client 11.0]Login timeout expired
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
*** [08001][10060][Microsoft][SQL Server Native Client 11.0]A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL
Server is configured to allow remote connections. For more information see SQL Server Books Online.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
*** Failed to connect to the SQL Server, connection type: MP_CONTROL_ACCESS.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Failed to get connection to the configured SQL database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Failed to connect to the configured SQL database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Reverting back from using the SQL connection account.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Failed to get the current CLR Enabled configuration setting for the configured SQL Server hosting the database.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
MPStart(): CheckSqlDatabaseClrEnabled() returned 0x800720d9
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Waiting up to 300 seconds for the SMS Agent Host service to be running.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
Stopped waiting for the SMS Agent Host service to be running; Result = 0x0.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
MPStart(): WaitOnSmsAgentHostRunning() returned 0x0
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10
1924 (0x0784)
MPStart(): CreateThread() succeeded with id 0x2fc.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10 1924 (0x0784)
SMS_MP_CONTROL_MANAGER successfully STARTED.
SMS_MP_CONTROL_MANAGER
01/04/2015 17:28:10 1924 (0x0784)
Can anyone provide any suggestions as to where i should begin troubleshooting this issue? When i deployed the MP to the smaller domain i ensured it
had a Management Point Connection Account which could access the SQL DB in the larger domain. I'm wondering if the two error messages i'm receiving are related or whether i have two separate issues here?
Thanks for the help!

Hi Paul,
thanks for taking the time to help. I registered asp.net v4 with IIS as per your suggestion, unfortunately it hasn't made much difference and i'm still seeing the "Call
to HttpSendRequestSync failed for port 80 with status code 500, text:Internal Server Error"
message repeating in mpcontrol.log. Have you got any further suggestions of things
to try? Seems like an error message i really need to fix!
As far as the MP to SQL issue goes, the network team assured me the connection is allowed
but i might get them to double check this just in case.
Thanks

SCCM 2012 NO SP - Reporting for application deployments not up to date

Hello,
We have a problem when deploying applications with our SCCM 2012 NO SP.
The reports for the application deployments and sup deployment are not up to date.
The applications have been deployed on the clients but the information is not in sccm servers.
The reporting for the package deployment are working correctly.
Do you have an idea ?
Thanks

Hi,
How are things going? Please let us know if there is any progress.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Collection in SCCM 2012 of SCCM 2007 clients?

Hi,
I'd need to make a collection of SCCM 2007 clients in SCCM 2012. This way I know which clients need to be updated.
Can that be done?
I guess queries can only be run on what sccm 2012 client return on info (I tried a simple query: configuraiton manager client state - version but it only return versions 5.x).
Pls advise.
J
Jan Hoedt

I'd need to make a collection of SCCM 2007 clients in SCCM 2012. This way I know which clients need to be updated.
Can that be done?
Can't you just add the column '(client) version' in the console? Are they displayed then? (Also keep in mind that it's theoretically not possible that CM07 clients can be assigned to a CM12 site)
Torsten Meringer | http://www.mssccmfaq.de

SCCM 2012: OSD to VHDX, deploy VHDX bare metal via TS?

Hi,
I wonder what your point of view is on the following scenario:
1.Deploy ts to vhdx
2.Deploy this vhdx to pc (bare metal) via another ts, this ts would then:
-wipe the disk
-make bootpartition
-add vdisk via bcdboot
It would give a lot of flexibility in terms of deployment speed (only 1 file to deploy, not that many reboots)backup (mount vhd to recover data),adding extra os, running clients vhd on hyperv host ...
Only issue would be how to add machine specific drivers.
Please advise.
J.
Jan Hoedt

Hello,
Only issue would be how to add machine specific drivers.
The answer is to this question. And in order to deploy VHD, you can follow this blog:
SCCM 2012 R2 – Create Virtual Hard Disk (VHD)

How to find the table in which data from a structure sits

Hi,
I want to know how to find the exact table where data sitting in various structures during runtime are stored.
For instance,in ME23N we have various tabs and data in those are held in various structures. This we can see by checking the technical setting of each field.
I want to know in which table the data is actually stored for each field and how to find them.
Any other means other than using "WHERE USED" option?
Thanks
CM

After checking for technical field from the screen, when you reach out to structure, you can dbl click on the particular field's data element. From this data-element you can get to know in which tables it is used. Also if the data element refers to some master data field then you can check out its domain and in the domain you can refer the<b> value table</b> for that domain. This is what i will do if i am not sure about anything.
Hope it will help a little.
Jignesh.

How to find out the columns which has 16 digit credit card number

Hi All,
I have a requirement where in i need to find out the columns which has 16 digit credit number in it and create a report with owner, table name and column name.
The issue is that the credit card number can be entered in any columns of any table of any schema. For example the credit card number can be entered in any description field(eg: The number is 4001412134642881), in that case i need to filter only the numbers and do the LUHN check to validate the credit card number.
Please provide me a suggestion on how to scanl the values of all the columns to know the column which has credit card number.
Regards,
Raj.

Tell me this - how the hell do you have a database with credit card number data and NOT know which columns of which tables contain credit card numbers? (and how on earth is this data NOT encrypted!?)
How is what you want to do, NOT a fishing expedition to hack a database that may or may not be storing credit card details?
And do you honestly think that we should simply trust that once you have extracted these numbers, performed a Luhn algorithm to verify these as credit card numbers, you are not going to fraudulently use these credit card numbers!?
I have marked your posting as an attempt to hack an Oracle database for fraudulent use of credit card data. I hope that your OTN account is terminated soon and trust that your too much of a coding idiot to actually succeed in this endevour.

How to find out the values which are assigned in authority group

Hi to all
Please tell me where can I find out the values which are assigned in authority object according to roles.
for ex :
         Changed    Customer: Account Authorization                              F_KNA1_BED
          Changed    Customer: Account Authorization                              T-DR50175601
            Activity                       01, 02, 03, 08                                                              ACTVT
            Authorization Group            5100                                                                        BRGRU
F_KNA1_BED is the authority object , assigned to one user.
He can access the authorization group 5100. I want to check that value in my program.
How ?
Where it is stored.
Please help me....
Regards
Anubhav Gupta

Hi Anubhav,
Please use this FM "SUSR_USER_AUTH_FOR_OBJ_GET" and pass the object name in it . You would get the values for that particular object.
Thanks
Nitin Sachdeva

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

SCCM 2012 R2 CU2 Admin Console Connects But Closes In A Few Seconds

I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. There are four servers: site server, secondary DP, WSUS/SUP, and a SQL server. On the first three the SCCM Admin Console will open. But when logged into the SQL server, the Admin Console opens
for a couple seconds, then closes. The SQL box can connect via wbemtest to
\\server\root\sms\site_ABC. I have checked all the items that show on the screen when your console won't connect. There are no errors in the smsprovl.log on the site server. I think this problem is on the SQL server.
This is one of three problems I've had a lot of difficulty with on this network. I'm making separate threads for all three
Ben JohnsonWY

I have been able to verify this problem generates 4 entries in Event Viewer/System logs. In the order they get generated by first in time:
1st - A fatal error was generated and sent to a remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 43. The Windows Schannel error state is 552.
2nd - The certificate received from the remote server does not contain the expected name. It is therefore not possible to determine whether we are connecting to the correct server. The server name we were expecting was (the IP of the SQL server). The
SSL connection request has failed. The attached data contains the server certificate.
3rd - DCOM was unable to communicate with the server servername.fqdn using any of the configured protocols; requested by PID 3cb8 (C:Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\Microsoft.ConfigurationManagement.exe)
4th - an exact repeat of the 3rd entry.
Ben JohnsonWY

How to find list of accounts which are moved out?

Hello Experts,
Can anyone please tell me how to find inactive accounts i.e. which are moved out.
following logic has been given but i am not able to find the inactive accounts.
The inactive accounts can be identified by the Move-In/Out dunning procedure.
is there any table where i can find out?
Thanks,
Sarang
Edited by: sarang gujrati on Dec 30, 2008 10:26 AM

Query on table : EVER.
select vertrag from ever where auszdat(move-out) = sy-datum.
EVER table
EINZDAT ( Move-in date)
AUSZDAT( Move-out-date)
EAUS :: Move-in Doc. for Cont Account.
EAUSV :: Move-in Doc. for Cont.
You can query on these tables also.
Let me know if you need more information on this.
Regards,
Shiva Kumar

How to find in SCCM 2012, Which(sccm admin) deployed Application on machines.

Similar Messages

Maybe you are looking for