How to find open item in bsik table

anyone can tell me how to find open items for vendor in bsik table or it will store only open item.
i debug the tcode fbl1n to see . but not able to find
Kumar

Hi
There is no specific field name for open item in the table BSIK.Yes BSIK include a structure named ABSIK_PSO and which is a "IS-PS: Data appendix of open items vendors".
Yes there is a field name
BUZEI - Line Item
EBELP - Item
You check with your requirement again and try to use these fields,if you still facing some probs than write back to me,i will try to give the appropriate solutions.
Thanks
Mrutyunjaya Tripathy

Similar Messages

  • How to find open item?

    Situation:
    Sales order has Two line items.
    During delivery or billing one line item is left.
    How to find the in which sales order this has happened?
    Anand.

    Dear Anand,
    You can check this through VA05 or VL10C
    Regards
    MBS

  • BDC - How to find line item index in table control?

    Hi guys,
    I am doing a BDC for VL02N, I am stuck up in positioning the line item index. For example, I have 10 line items, I want to fill quantity for the item 000060 which is in the third line. I am able position the cursor using button for locating item ( ok_code = 'POPO' ), but I could not find the index of the item in the table control, so that I can enter the quantity value as
    PERFORM bdc_field  USING 'LIPSD-G_LFIMG(03)' '100'.
    Any expert to help me on this?

    Depending on the message the line number might be in one of the fields:
    MESSAGE_V1
    MESSAGE_V2
    MESSAGE_V3
    MESSAGE_V4
    Although if the message simply is not meant to include the line number, it won't be there. That's the way it is. If there is a user exit available, you may add your custom messages with the line number. In some user exits (in sales order for sure) there is a special variable (flag), which is set when the BAPI runs the transaction.

  • How to find open item from sales order

    Hi all,
      my requirement is one sales order is there partial delivery is happened for some materials,take exampla matarial X has 100 quantity in sales order pratial delivery 50 is done, iwant to know the open order qunatity for a  material X from sales order.
    regards,
    kishore.

    hi kishore,
    in the partial delivery scenario, the sales order items always be a open.
    you can see the document flow of that document by using Tcode : VA03 then click on'update document flow' icon. then system will show the status.
    i.e  sales order is 'being processed'
      outbound delivery is completed
    billing document is completed
    and accounting document in not cleared.
    if it is helpful, then give me the points.
    Regards,
    somu.

  • How to find open sales orders.

    Hi Gurus,
    Can you please help me out How to find open Sales orders in SAP.
    Is there any transaction code available or we can get it through via tables.
    Your afforts are highly appriciated .
    SRavani.

    Dear SRAVANI,
    You can find open sales orders from the Transaction code "VA05N", You just run this report, Below the screen you can find open sales orders radio button , you select this and give execution parameters and execute(F8).
    You will get the all open orders.
    Hope it fixes your issue.
    Please check it and revert.
    Thanks&Regards
    Raghu.k

  • R12: How to filter Open Item Revaluation Report based on GL Date

    Hi,
    Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
    Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
    We need to run the report only for specific date only. Please share with me if anyone know about this.
    Thanks.

    Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

  • How To Find Opening Stock And Value For a Material

    Hi Experts,
    How To Find Opening Stock And Value For a Material  in Given Dates
    Moderator Message: Search.
    Edited by: kishan P on Sep 15, 2010 4:05 PM

    Thanks For Answering.....
    But I Need Any Function Module To Get Opening Stock And Value For Given Material With in Dates.

  • How to delete an item in the table

    hi all ,
    Is anyone there to give me an idea , how to delete the item in the table , by selecting the row. , for the what i have to do , is there any documentation to follow , guide me itys really urgent.

    Hai Madhu,
    It is pretty simple.
    First u define a button. and in onAction  Event of the button write the following code.
    process is as follows:
    1)get the node
    2)get the element
    3)using the method remove_element() ,remove the element.
    <u><b>The Sample Code is as follows</b></u>
    DATA:
          node_flighttab                      TYPE REF TO if_wd_context_node,
          elem_flighttab                      TYPE REF TO if_wd_context_element.
        node_flighttab = wd_context->get_child_node( 'FLIGHTTAB' ).
      get element via lead selection
        elem_flighttab = node_flighttab->get_element(  ).
        node_flighttab->remove_element( element = elem_flighttab ).
    Follow the above code ,it will definately help you.

  • How to find Transaction for a Known Table maintenance View

    Hello Friends,
    May I know how to find transaction for a known table maintenance View.
    Thanks,
    Best Regards,
    Sudhanshu Garg

    Goto SE16 Transaction and enter TSTCP Table
    Here PARAM = /SM30 VIEWNAME=Table name*;UPDATE=X;
    enter table name in bold.
    Thanks
    Seshu

  • How to find the list of existing tables in a schema using DB link?

    Hi
    I know how to find the list of existing tables in a schema using the following query
    SQL> select * from tab;
    but, how to list the tables using a DB link?
    For Example
    SQL> select * from tab@dblink_name;
    why this doesn't work?
    Pl advice me
    Thanks
    Reddy.

    ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
    The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

  • How to find out the Non Partitioned Tables used 2Gb on oracle

    Hi team
    how to find out the Non Partitioned Tables used > 2Gb on oracle where not is sys & system
    regards

    heres 1 I made earlier
    set pagesize 999
    set linesize 132
    col owner format a25
    col segment_name format a60
    select owner,segment_name,segment_type,(bytes/1024/1024)"MB size"
    from dba_segments
    where owner not in ('SYS','SYSTEM','XDB','MDSYS','SYSMAN') -- edit for taste
    and segment_type = 'TABLE'
    having (bytes/1024/1024) > 2000
    group by bytes, segment_Type, segment_name, owner
    order by 4 asc

  • How to post open item balance in mass ( ECC6.0)?

    Hi experts,
    In order to change alternative account in a principal account, I have to post a lot of open item to zero. After changing the alternative account, I have to reverse this open item and display the original open item.
    How to post open item balance in mass?
    For your information, my SAP system=ECC6.0
    Thanks for your feed back
    Rgds

    Hi,
    thanks for you information. I check also with Ecatt.

  • How to find the column name and table name with a value

    Hi All
    How to find the column name and table name with "Value".
    For Example i have value named "Srikkanth" This value will be stored in one table and in one column i we dont know the table how to find the table name and column name
    Any help is highly appricatable
    Thanks & Regards
    Srikkanth.M

    2 solutions by Michaels (the latter is 11g upwards only)...
    michaels>  var val varchar2(5)
    michaels>  exec :val := 'as'
    PL/SQL procedure successfully completed.
    michaels>  select distinct substr (:val, 1, 11) "Searchword",
                    substr (table_name, 1, 14) "Table",
                    substr (t.column_value.getstringval (), 1, 50) "Column/Value"
               from cols,
                    table
                       (xmlsequence
                           (dbms_xmlgen.getxmltype ('select ' || column_name
                                                    || ' from ' || table_name
                                                    || ' where upper('
                                                    || column_name
                                                    || ') like upper(''%' || :val
                                                    || '%'')'
                                                   ).extract ('ROWSET/ROW/*')
                       ) t
    --        where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'DEPARTMENTS')
           order by "Table"or
    SQL> select table_name,
           column_name,
           :search_string search_string,
           result
      from cols,
           xmltable(('ora:view("'||table_name||'")/ROW/'||column_name||'[ora:contains(text(),"%'|| :search_string || '%") > 0]')
           columns result varchar2(10) path '.'
    where table_name in ('EMP', 'DEPT')
    TABLE_NAME           COLUMN_NAME          SEARCH_STRING        RESULT   
    DEPT                 DNAME                ES                   RESEARCH 
    DEPT                 DNAME                ES                   SALES    
    EMP                  ENAME                ES                   JONES    
    EMP                  ENAME                ES                   JAMES    
    EMP                  JOB                  ES                   SALESMAN 
    EMP                  JOB                  ES                   SALESMAN 
    EMP                  JOB                  ES                   SALESMAN 
    EMP                  JOB                  ES                   PRESIDENT
    EMP                  JOB                  ES                   SALESMAN 
    9 rows selected.

  • How to find latest entry in the table according to time

    how to find latest entry in the table according to the time
    is there any function module to do so
    \[removed by moderator\]
    Regards
    Shashi
    Edited by: Jan Stallkamp on Aug 25, 2008 4:39 PM

    Hi,
    If you want to read the entry from an internal table,
    sort the internal table in the descending order by the time and
    delete adjacent duplicates by comparing the fields other than time and the internal table will have the latest record.
    Suggestion: instead of only time try to have one more field called date with the time combination
    Regards,
    Ramesh

  • How to find function module's and tables used for the particulat screen or TCODE?

    Hello Nation,
    I would like to know how to find the  function modules and tables used for the particular screen or TCODE or program.
    Example : I would like know the function module used in the program RDBGFT?
                     How can i find that?
    Thanks in advance ,Awaiting your reply.

    Make use of Find function  with the keyword "CALL FUNCTION".
    Make use of the same find function with the keyword "Select" to know the database tables used.
    Regards,
    Philip.

Maybe you are looking for

  • "One or more pages are in use and could not be deleted" - AGAIN.

    Open a PDF file. Save it under a different name Try to delete a page You'll get this error: "One or more pages are in use and could not be deleted" I've had this billions of times now and the only solution that works 100% of the time is closing and r

  • Problem with thumbnails loading on LR Gallery.

    Hi everyone. I am having difficulty getting galleries to upload properly, and show the jpg files after running them through Lightroom. I use the web gallery in LR, but then when I go to view a gallery online (it looks fine my the example given in LR)

  • Noise through Speakers when using Firewire 400 port.

    Can anyone explain to me why my G4 Powerbook would make squealing noises when I have anything plugged into the Firewire 400 port? It is driving my crazy!!

  • How do you get dvds to work on regular dvd players?  It works on PC dvd player just fine.

    I created a movie via Elements 13 (Using Windows 7) using video from my camcorder.  I added menus and such and then burned it to a DVD -R using Elements 13.  The dvd will play on a computer via the dvd player but it won't play on a regular dvd player

  • Photo resolution

    Hello all nokia users, Please give me some advice regarding my problem. HOW CAN I CHANGE the photo resolution for my Nokia E6? All my photos have a 3264 x 1832. Is to much, the photos are to big. Thanks` Best regards!