How to find out the idoc type required for our requirement

Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
Prasanna

Hi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A

Similar Messages

How to find out the Idoc number triggered for any material transfer frm SAP

Hi Folks,
Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
Do we have any navigation for that in MM03?
Thanks,
SPMD.

Hi Shabbirmdpasha,
If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
Also would suggest to post the same in abap forums for more answers:
ABAP Development
Regards,
---Satish

How to find out the condition type of the tax code in the PO document

Hi friends,
My questions is how to find out the condition type of the tax code in the PO document.
When you use me23n to display one PO document. In the invoice tab, there is one text field named 'tax code' whose value could be T1, T2, J1, J2 and so on. Beside the text field, there is one button named taxes. When you click the button taxes, it will show you the condition type of the tax code. For example, if the tax code is 'T1', then its condition type 'mwcn'.
I want to use the information on the PO to find out the value 'mwcn' of the tax code 'T1'. Could anybody help to describe the logic?it looks like the value is saved in the table konp. But I don't know the logic. Please describe. Thank you.

Hi,
Hope you have asked for select query..
select single knumh from a003 into wa_knumh
where mwskz = wa_itpotab-mwskz
and kappl = 'TX'
and aland = 'IN'.
select single kbetr from konp into wa_kbetr
where knumh = wa_knumh.
cheers,
Dep

How to find out the IDOC number(urgent)

hello every one,
i had recived all the data to BW from R/3 but the request is still running in the system
for this <b>i need to manually release the IDOC for BD87</b>
can any one please help me <b>How to find out the Idoc Number in R/3 and In BW for the particular load</b>
Regards
Sandy

hi Siva,
thanks for ur valuable answer,
it is showing IDoc num for the succeeded one....
my present error is Data pack 1 got error and Datapack 2 was success,
their 3IDocs are their in detail tab all are success
as per my knowledge it will for the Data pack 2 and it is showing 3different
how can i find the Idoc which was struck .....
that need to process manually in BD87..
please suggest if i am wrong
Regards
Sandy

How to find out the Number range object for Incident number

How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanya

HI, an example.
data: vl_num type i,
      vl_char(6) type c,
      vl_qty type INRI-QUANTITY,
      vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
    NR_RANGE_NR                   = '01'
    OBJECT                        = 'ZRG0000001'
   QUANTITY                       = '1'
SUBOBJECT                     = ' '
TOYEAR                        = '0000'
IGNORE_BUFFER                 = ' '
IMPORTING
   NUMBER                        = vl_num
   QUANTITY                      = vl_qty
   RETURNCODE                    = vl_rc
EXCEPTIONS
   INTERVAL_NOT_FOUND            = 1
   NUMBER_RANGE_NOT_INTERN       = 2
   OBJECT_NOT_FOUND              = 3
   QUANTITY_IS_0                 = 4
   QUANTITY_IS_NOT_1             = 5
   INTERVAL_OVERFLOW             = 6
   BUFFER_OVERFLOW               = 7
   OTHERS                        = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard

How to find out the last time login for a locked login account?

In ASE 15.4,there are many login account show as locked and unlocked. How to find out the last login time for those locked login account?

Thank you. The version of my ASE is 12.5.4.
This is what I got from select * from syslogins:
suid status accdate totcpu totio spacelimit timelimit resultlimit dbname name password language pwdate audflags fullname srvname logincount procid
1
30 2 10/25/2012 11:41:10.430 AM 0 0 0 0 0 . . ... us_english 02/24/2.0.08 12:55:38.640 PM 0 [NULL] [NULL] [NULL] [NULL]
this is what I got from exec sp_displaylogin 'mylogin':
1 Suid: 46
2 Loginame: mylogin
3 Fullname: FN LN
4 Default Database: mydb
5 Default Language: us_english
6 Auto Login Script:
7 Configured Authorization:
8 Locked: YES
9 Date of Last Password Change: Apr 17 2010 2:36PM
10 Password expiration interval: 0
11 Password expired: NO
12 Minimum password length: 6
13 Maximum failed logins: 0
14 Current failed login attempts:
15 Authenticate with: AUTH_DEFAULT
which one is for last login time?

In DBI , how to find out the Source Query used for the Report

Hi All,
How to find out the Source Query used to display the data in the DBI Reports or Dashboards. We can get it in Apps Front end by Going to Help and Record Histroty. But DBI Runs in Internet Explorer so i dont know how to get the source query ( SELECT Query ) Used.
In IE we have View --> Source . But that does not help since it gives the HTML Coding and not the SELECT Query used.
If anyone has ever worked on it...Please help me in finding it.
Thanks,
Neeraj Shrivastava

Hi neeraj,
You can see the query used to display reports.Follow these steps to get the query.
1)Login to oracle apps
2)Select "Daily Business Intelligence Administrator" responsiblity.
3)Now click on "Enable/Disable Debugging" (Now u enabled debugging)
4)now open the report which you want to see the query of
5)In view source it displays query along with the bind varilables.
Feel free to ping me if you have any doubts
thanks
kittu

How to find out the standard info stucture for a customized IS in LIS

Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
Saddy

Hi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy

How to find out the parameter type of a parameterized object?

Hi,
I've got a list containing instances of a parameterized class. The parameters of the instances can be different. When using the instances, I need to know the types of the parameters. How can I find them out?
Regards,
Frank

Look at the first item in the List and see what it is?
I'm not trying to be funny. Generic information is compile time only, the types of the parameters are not generally available at run time.
You can find out the bounds on the types, if any, but not the actual types.
AndyT

How to find out the font type?

Is it possible to find out the type of the used fonts(like Open type (or) true type) in illustrator cs3 file through programmatically. Kindly share with me the possibilities and solution.
Thanks...

You can't consistently, but a lot of files have identifying characteristics in the first few bytes that make it easier.
There are utilities to do this, but I could have sworn that someone wrote a Java library to do it as well. As always, I suggest that you poke around http://jakarta.apache.org/commons/
Or do a Google if Jakarta doesn't pan out.
Message was edited by:
paulcw

How to find out the SET PARAMETER ID for FB02 transaction

hi masters,
i m working on a alv report and in that i have to make a BELNR field as a interactive field. i m using the 'user command' for this.
FORM user_command USING ucomm TYPE sy-ucomm
                    selfield TYPE slis_selfield.
IF selfield-value IS NOT INITIAL.
    CASE selfield-fieldname.
      WHEN 'BELNR'.
        SET PARAMETER ID 'FBAS' FIELD selfield-value.
        CALL TRANSACTION 'FB03' AND SKIP FIRST SCREEN.
      WHEN OTHERS.
        MESSAGE text-000 TYPE 'W'.
    ENDCASE.
ENDIF.
ENDFORM.                    "user_command
i used this code using this. using this code my program goes to FB03 tc but it don't shows the data of BELNR what i was clicked. it always shows first BELNR no. in the table. plz anyone help me for this..
the SET PARAMETER ID 'FBAS' i m using is right? if not plz suggest me how to find out correct one?

Hi Vicky,
To know the Parameter Id of any field in a transaction ,
you just press F1 onthe particular field then in technical settings under Field data
you can see the PARMATER ID.
So if you check like this you can see 'BLN' as parameter id for Document number in FB03
transaction
Regards,
Manoj Kumar P

How to find out the formatt type of a date.

hello iam getting the date from some content server..then iam updating the date..the problem is before update i should know the date formatt of returned date from server so that i can set that formatt to the user entered date while updation..so how can i know the date formatt of given date..
regards,

object dat1 ="some value";
when i modify these date and submit back through
connector its checking for format..
bcos iam not sure what date formatt server have..
i want to know can we no from dat1 about the
format..whether this dat1 is in dd/MM/yyyy format are
MM/dd/yyyy format..So you have a String that reprents a date? Or do you have a Date? If the latter, then, like somebody already said, there is no format.
Assuming it's a String...
Are dd/MM/yyyy and MM/dd/yyyy the actual formats you'll get? Let me ask you this: If somebody showed you the string (on a piece of paper) "12/05/2005" how would you know if it was Dec. 5 or 12 May?
Answer: You wouldn't. You can't without some additional information.
And if you can't know, then neither can Java.

How to find out the Forms developer version for R12

Hi
We are using R12 Oracle Applications : 12.0.4. We needs to do small Forms development. Please let me know what version of Forms developer we needs to download 6i or any other version.
How we will find out what version of forms we needs to use?

Open any screen in Oracle R12 Applications, then click on Help. There you will find the complete details including the version of Forms.

How to Find Out The Production Order Number For The Sales Order Line Items

Hi All,
I want to know the number of production orders for each sales order line item. I know the sales order number .Can anyone tell me how the tables can be linked to get all the production order numbers for each sales order line item.

I think it depends on your configuration. But check fields KDAUF and KDPOS in table AUFK. or in table AFPO.
Regards,
Rich HEilman

How to find out the Accounting document status for sales order

Hi
We have created the sales document by referring the billing document of contract no.Aftre that we have raised invoice for sales document. Now system is generated both invoice , accounting document and the value is appearing against the invoice document. However the status against the accounting document is showing as not cleared. I want to know where we could see this status in Table,
Normally we can see the status in FPLT for contracts since its having the billing plan no. Suppose if the billing plan is not available like S.O , How to check the status in table?
I have refered so many tables but not helping. Since i want to get the uncleared value of accouting document.
Please help me.
Regards
Thenna

Hi Thenna
The accounting document status in the document flow is determined dynamically when you display the document flow,
it's not saved in a specific table.
Here is the relevant logic:
LV05CF01 -> form BUCHHALTUNGSBELEG
IF vbrk-vbeln <> vbfa_tab-vbeln.
   PERFORM vbrk_ermitteln USING vbfa_tab-vbeln.
   REFRESH xbkpf.
   CALL FUNCTION 'FI_DOCUMENT_READ'
    LOOP AT xbseg WHERE bukrs EQ xbkpf-bukrs
                  AND   belnr EQ xbkpf-belnr
                  AND   gjahr EQ xbkpf-gjahr
                  AND   ( koart EQ 'D' OR koart EQ 'K' ).
    ENDLOOP.
            IF NOT sy-subrc IS INITIAL.
SET STATUS TO 'No items are cleared'
              l_xdoc_num-status = 'A'. <<<
            ELSE.
              LOOP AT xbseg WHERE augbl IS initial
                            AND   umskz NE 'A'
                            AND   vorgn NE 'AZUM'
                            AND   ( koart EQ 'D' OR koart EQ 'K' ).
              ENDLOOP.
              IF NOT sy-subrc IS INITIAL.
Set status to 'All items are cleared'
                l_xdoc_num-status = 'C'. <<<
              ENDIF.
            ENDIF.
Regards,
Alex

How to find out the idoc type required for our requirement

Similar Messages

Maybe you are looking for