How to find out the PO line items for which no GRN has been done
Dear Friends,
I need a report which will show all the fully open PO items for which no GRN has been done.
In ME2N when I give the selection parameter "open goods receipt" then it shows all the line items with partially & fully open. But my requirement is to get a report of only fully open items.
Regards
Rutabhadra Panda
Hi Friends,
Thanks a lot for your reply.
But this is a report which projects the expected GRNs & does not depend whether partial or full.
Is there any other way out?
Can I download from the table directly.
Regards
Rutabhadra Panda
Similar Messages
-
How to find out the last date & time on which a program has been run
Hi Experts,
Can anybody tell how to find out the last date on which a purticular program has been run.
Valuable answers will be rewarded.
Thanks & Regards,
Satish.Hi!
Try STAD transaction. Unfortunately it contains a huge amount of data, so it is available only for a few days backwards... Maybe some weeks, but you can't make yearly reports from its data... So it's not useful to see, which program is in use or not...
I planned once to download it weekly, but it was not so important...
Regards
Tamá -
How to find out the Number range object for Incident number
How to find out the Number range object for Incident number ?
CCIHT_IAL-IALID
regards,
lavanyaHI, an example.
data: vl_num type i,
vl_char(6) type c,
vl_qty type INRI-QUANTITY,
vl_rc type INRI-RETURNCODE.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
NR_RANGE_NR = '01'
OBJECT = 'ZRG0000001'
QUANTITY = '1'
SUBOBJECT = ' '
TOYEAR = '0000'
IGNORE_BUFFER = ' '
IMPORTING
NUMBER = vl_num
QUANTITY = vl_qty
RETURNCODE = vl_rc
EXCEPTIONS
INTERVAL_NOT_FOUND = 1
NUMBER_RANGE_NOT_INTERN = 2
OBJECT_NOT_FOUND = 3
QUANTITY_IS_0 = 4
QUANTITY_IS_NOT_1 = 5
INTERVAL_OVERFLOW = 6
BUFFER_OVERFLOW = 7
OTHERS = 8
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
vl_char = vl_num.
write vl_char.
Regard -
How to find out the Idoc number triggered for any material transfer frm SAP
Hi Folks,
Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
Do we have any navigation for that in MM03?
Thanks,
SPMD.Hi Shabbirmdpasha,
If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
Also would suggest to post the same in abap forums for more answers:
ABAP Development
Regards,
---Satish -
How to find out the last time login for a locked login account?
In ASE 15.4,there are many login account show as locked and unlocked. How to find out the last login time for those locked login account?
Thank you. The version of my ASE is 12.5.4.
This is what I got from select * from syslogins:
suid status accdate totcpu totio spacelimit timelimit resultlimit dbname name password language pwdate audflags fullname srvname logincount procid
1
30 2 10/25/2012 11:41:10.430 AM 0 0 0 0 0 . . ... us_english 02/24/2.0.08 12:55:38.640 PM 0 [NULL] [NULL] [NULL] [NULL]
this is what I got from exec sp_displaylogin 'mylogin':
1 Suid: 46
2 Loginame: mylogin
3 Fullname: FN LN
4 Default Database: mydb
5 Default Language: us_english
6 Auto Login Script:
7 Configured Authorization:
8 Locked: YES
9 Date of Last Password Change: Apr 17 2010 2:36PM
10 Password expiration interval: 0
11 Password expired: NO
12 Minimum password length: 6
13 Maximum failed logins: 0
14 Current failed login attempts:
15 Authenticate with: AUTH_DEFAULT
which one is for last login time? -
How to find out the selected line in list
Hi all,
Can any one tell me how to find out the selected event in the listYour subject said 'selected <b>line</b> in list' and your description says 'selected <b>event</b> in the list'. Which one is it you want to know?
For line you will use the event AT LINE-SELECTION and for event you will use AT USER-COMMAND.
Please reward and close if answered, if not, please revert back to the forum with more details.
Thanks,
Srinivas -
How to find out the idoc type required for our requirement
Hi,
How to find out the list of available idoc type in SAP. It will be good if i get to know the table name where all the idoc type definitions are gets stored.
Say i have some requirement and for that requirement how i can find the proper idoc type to be used. (assume functional consultant is not providing that information)
Points will be given for the useful answers
Thanks,
PrasannaHi prasanna,
we can get SAP idoc types in tcode we31.For every requirment there will be different message type.
For example we want idoc type for account invoice receipt.
First find out message type for that purpose which can be found in we81-ACC_INVOICE_RECEIPT.
Get this message type and search in we82 where we can find message type and idoc type linkage.
try this way.
Reward if it is usful.
Thanks,
Srikanth.A -
In DBI , how to find out the Source Query used for the Report
Hi All,
How to find out the Source Query used to display the data in the DBI Reports or Dashboards. We can get it in Apps Front end by Going to Help and Record Histroty. But DBI Runs in Internet Explorer so i dont know how to get the source query ( SELECT Query ) Used.
In IE we have View --> Source . But that does not help since it gives the HTML Coding and not the SELECT Query used.
If anyone has ever worked on it...Please help me in finding it.
Thanks,
Neeraj ShrivastavaHi neeraj,
You can see the query used to display reports.Follow these steps to get the query.
1)Login to oracle apps
2)Select "Daily Business Intelligence Administrator" responsiblity.
3)Now click on "Enable/Disable Debugging" (Now u enabled debugging)
4)now open the report which you want to see the query of
5)In view source it displays query along with the bind varilables.
Feel free to ping me if you have any doubts
thanks
kittu -
How to find out the standard info stucture for a customized IS in LIS
Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
SaddyHi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy -
How to find out the Last line of a page in Smart forms
Hi Experts,
I need to find out the <b>last line of a page in smartforms</b>.
I have <b>Heading in a text element</b> and its <b>text in another text element</b>.
If the heading falls in the last line, its contents will be displayed in the next page. I want to print the heading in the next page.
Please advise on this issue.
Thanks in advance,
VivenYou can put both the heading and contents in a Folder node and check the page protection checkbox of the Folder node. This way both will be displayed on the same page always.
-
How to find out the SET PARAMETER ID for FB02 transaction
hi masters,
i m working on a alv report and in that i have to make a BELNR field as a interactive field. i m using the 'user command' for this.
FORM user_command USING ucomm TYPE sy-ucomm
selfield TYPE slis_selfield.
IF selfield-value IS NOT INITIAL.
CASE selfield-fieldname.
WHEN 'BELNR'.
SET PARAMETER ID 'FBAS' FIELD selfield-value.
CALL TRANSACTION 'FB03' AND SKIP FIRST SCREEN.
WHEN OTHERS.
MESSAGE text-000 TYPE 'W'.
ENDCASE.
ENDIF.
ENDFORM. "user_command
i used this code using this. using this code my program goes to FB03 tc but it don't shows the data of BELNR what i was clicked. it always shows first BELNR no. in the table. plz anyone help me for this..
the SET PARAMETER ID 'FBAS' i m using is right? if not plz suggest me how to find out correct one?Hi Vicky,
To know the Parameter Id of any field in a transaction ,
you just press F1 onthe particular field then in technical settings under Field data
you can see the PARMATER ID.
So if you check like this you can see 'BLN' as parameter id for Document number in FB03
transaction
Regards,
Manoj Kumar P -
How to Find Out The Production Order Number For The Sales Order Line Items
Hi All,
I want to know the number of production orders for each sales order line item. I know the sales order number .Can anyone tell me how the tables can be linked to get all the production order numbers for each sales order line item.I think it depends on your configuration. But check fields KDAUF and KDPOS in table AUFK. or in table AFPO.
Regards,
Rich HEilman -
How to find out the Forms developer version for R12
Hi
We are using R12 Oracle Applications : 12.0.4. We needs to do small Forms development. Please let me know what version of Forms developer we needs to download 6i or any other version.
How we will find out what version of forms we needs to use?Open any screen in Oracle R12 Applications, then click on Help. There you will find the complete details including the version of Forms.
-
How to find out the Accounting document status for sales order
Hi
We have created the sales document by referring the billing document of contract no.Aftre that we have raised invoice for sales document. Now system is generated both invoice , accounting document and the value is appearing against the invoice document. However the status against the accounting document is showing as not cleared. I want to know where we could see this status in Table,
Normally we can see the status in FPLT for contracts since its having the billing plan no. Suppose if the billing plan is not available like S.O , How to check the status in table?
I have refered so many tables but not helping. Since i want to get the uncleared value of accouting document.
Please help me.
Regards
ThennaHi Thenna
The accounting document status in the document flow is determined dynamically when you display the document flow,
it's not saved in a specific table.
Here is the relevant logic:
LV05CF01 -> form BUCHHALTUNGSBELEG
IF vbrk-vbeln <> vbfa_tab-vbeln.
PERFORM vbrk_ermitteln USING vbfa_tab-vbeln.
REFRESH xbkpf.
CALL FUNCTION 'FI_DOCUMENT_READ'
LOOP AT xbseg WHERE bukrs EQ xbkpf-bukrs
AND belnr EQ xbkpf-belnr
AND gjahr EQ xbkpf-gjahr
AND ( koart EQ 'D' OR koart EQ 'K' ).
ENDLOOP.
IF NOT sy-subrc IS INITIAL.
SET STATUS TO 'No items are cleared'
l_xdoc_num-status = 'A'. <<<
ELSE.
LOOP AT xbseg WHERE augbl IS initial
AND umskz NE 'A'
AND vorgn NE 'AZUM'
AND ( koart EQ 'D' OR koart EQ 'K' ).
ENDLOOP.
IF NOT sy-subrc IS INITIAL.
Set status to 'All items are cleared'
l_xdoc_num-status = 'C'. <<<
ENDIF.
ENDIF.
Regards,
Alex -
How to find out the corresponding planning area for a given infosource?
Hi,
We are in the process of implementing BW-APO in our project.
We have got couple of standard BI infosources and now the task is to identify the corresponding planning area for a given infosource..
Let' say for 0APO_DP_ORDERANALYTICS_1
what is the planning area?
Any help is appreciatable!!!
Regards,
Swapna.GHi Swapna.
You are at risk of putting the cart before the horse here. As Sujay asks, it is important to understand whether you are using the standard provided planning areas. Even then there are a number of different planning areas that may be deployed depending upon the required planning functionality. There then may be the case where standard planning areas are not being used (this is very often the case) which means that your InfoSources might only be good as a template.
All this makes your question virtually impossible to answer.
Maybe if you gave some background as to the status of your project we could help more.
From your question it looks as if you are working on APO-BW outbound (i.e., reporting after the planning has taken place) which would suggest that the design and build of APO-BW inbound and the planning functionality has taken place. Is this the case?
If so, then you need to touch base with your APO technical guys to understand the design of the planning areas and whether your standard 0APO_* InfoSources are suitable.
If not, I suggest you are working back to front and you should be focussing on the APO-BW inbound required to support the planning requirements.
Regards, Mark.
Maybe you are looking for
-
How do i import contact from other sim to iphone5
How do i import contact from other sim to iphone5
-
How to insert data type information to oracle database
Hi, there, I want to insert date information to oracle database in a jsp page using JSTL. but always got wrong message: javax.servlet.jsp.JspException: INSERT INTO DATE_TEST (date_default,date_short,date_medium) values(?,?,?) : Invalid column type I
-
App Store always shows Account INformation
Since the last update, iTunes dumps me into the Account Information page every time I enter my password. I see this whether I'm upgrading an app or purchasing something new. There is no warning message on the Account Information page, and I have chec
-
Truncated Data Error when loading saved waveforms
After I save a waveform using the "Write Waveforms to File" VI (e.g. I save it as wave.lvm), I have tried to load it using the "Read Waveform from File" VI. I always get an error about truncated or unflattened data (error 116). Any suggestions? Solv
-
Reading contents of tar.gz file programatically
Hi, I have a file explorer type application, where I want the user to be able to double click on the tar.gz file and see the contents of the tar archive inside the .gz file. Of course, we dont want to have to extract the entire .gz file first. But it