How to find out the user-exits?
hi.
how to find out the user-exits?
regards
eswar.
Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards
Similar Messages
-
How to find out the user exit is implemented
Hi All,
Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
Thanks,Hi Krishna/TW,
Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
Example: In STO process user is able to increase the qty in delivery. As per the client requriement system should not allow.
This is not possible in standard to control even after maintainig check over delivery field in 0VLP.
For this comapny has already implemented one enahnceament.
User Exit : USER EXIT_READ_DOCUMENT
Program: MV50AFZ1
like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
I hope now am clear with my requirement.
Thanks in advance. -
How to find out appropriate user exit
Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
BasuLook for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM -
How to find out all user exits edited
Hi All,
Would you know how to find out all user exits have been ever edited?
Can we find out those user exit by some tcode or table?
Thank you very much
Best Regards,
Calvin
Edited by: Sam Sum on Mar 2, 2009 5:09 AMHi,
Just try this in your system.
Go to SE38 and give ZX* and press F4.
Have a look at table MODATTR to find the active projects in your system.
Regards
Edited by: Rajvansh Ravi on Mar 2, 2009 5:17 AM -
How to find out the user who has created a new field in the custom table.
How to find out the user details who has created a new field in the custom table.
Thanks,
JoanHi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani -
How to find out the users currently logged into ODI
Hi all,
How to find out the users currently logged into ODI Work Repository?
Thanks.Hi,
It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
Thanks,
katukota -
Sub:find out the user exit report for any tc
Hi,
i want to find out the user exit report for any tc
Thanks,
jayarajHi,
Pls go through it the following coding. It will helps u.
*& Report YMS_USEREXITTEST *
REPORT YMS_USEREXITTEST no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname = tfdir-funcname.
select single * from tadir where pgmid = 'R3TR' and object = 'FUGR' and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab where pgmid = 'R3TR' and object = 'SMOD' and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt where sprsl = sy-langu and name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
-End of Program-
Thanks,
Shankar -
How to find out FICO user exits that are used by User
How to find out the FICO user exits that are used by user.
Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks. -
How to find out whether USER-EXIT is active or not
Hello!
How can I find out whether USER-EXIT is active or not ?
I set a break-point at these points and nothing happens
if I want save my daocument ???
Why
PERFORM USEREXIT_SAVE_DOCUMENT.
PERFORM USEREXIT_SAVE_DOCUMENT_PREPARE.
Ragards
IlhanHi Ilhan
The easiest way, I guess, is by going to transaction SMOD, sticking in your enhancement name and pressing the test button.
When placing breakpoints, don't use <b>Breakpoints > Breakpoint at > Statement...</b> and enter
PERFORM USEREXIT_SAVE_DOCUMENT
because you won't get any hits since the function module names are stored dynamically.
Rather use <b>Breakpoints > Breakpoint at > Function Module...</b> and enter
USEREXIT_SAVE_DOCUMENT
for a better chance of hitting the breakpoint.
Cheers
Lyal
Message's terrible grammar was edited by:
Lyal Schumann -
How to find out the user iD that previously deleted?
Hi,
My client has deleted some user ID in SBO v2004b. HOwever, when the client did that, he forgot to "deselect" the license that granted to the users going to be deleted. What's worse, he forgot the user ID that he deleted.
It makes the license available decrease. So, how can i find out the user ID that i previously deleted? Or any method to retrieve the correct number of license originally. ?
Thanks for your adviceHi,
Have a look at the FAQ weblog, Missing licence topic:
/people/ibai.pea/blog/2006/07/26/sbo-faq
Regards,
Ibai Peñ -
How to find out the User Details for the particular transaction
Hi,
Actually AJAB -Asset Year closing was done by One User.How and Where to find out the User details who executed the Transaction.Kindly tell me the T-code for this.
Thanks
Sap GuruHi:
Please contact you basis administrator.Give him the T.code and date when Year closing was done. He may resolve your problem.
Please let me know if you need more information,
Assign points if useful.
Regards
MSReddy -
How to find out the user from the Jobs queue in Report server
Hello All!
I have a doubt about finding out the user from the scheduled jobs queue. Say I go ahead and schedule a report on Reports Server how can I find out the user name. When I view the jobs using showjobs I could see that the DBMS_JOBS table has a column under "Job Owner". But it invariantly shows it is "rwuser". So is there a way to find out which user has scheduled which job?
Regards
Shobhahi,
The below tables will give only the name .
USER_ADDRS
USER_ADDR
USER_ADDRP
USR02
i think you need email address .
you can use this Tcode : su01d
and give the user name and excute it
i hope it will help you.
Ram
Edited by: Ram velanati on Jun 30, 2008 6:57 PM -
How to find out the user list that created by someone?
Hi all:
Now I want to develop a program that can find out the user list created by someone.
such as :
John create 3 user in SAP ,they are u1,u2,u3.
Susan create 2 user in SAP , they are s1,s2.
I input the the parameter such as John , the program can give me the list :u1,u2,u3.
Could you tell me which table should I use in this program?
Thanks .
Elisa.Hi Ling,
As per my understanding, you are looking for listing down the number of Users created by a particular users of the System. Like a System Administrator has created some 30 users. If this is correct, then you can use the table
USR02 - Logon Data (Kernel-Side Use). This table has 2 fields which are of importance - BNAME - User Name in User Master Record & ANAME - Creator of the User Master Record. You can query the ANAME with the username of the system and you will get the resultant users.
But I would reccomend to search the Table for a standard class, function module or RFC or BAPI so that you can reuse the same and need not to develop from the scratch.
Hope this will help.
Thanks,
Samantak. -
How to find out the user name and email address from SAP user id?
Hi experts,
In sto3n I find out the the user id with most navigations. I like to know his name or email address to contact him. Which table stores the user details? how to do it?
Thanks in advance.
Sharat.hi,
The below tables will give only the name .
USER_ADDRS
USER_ADDR
USER_ADDRP
USR02
i think you need email address .
you can use this Tcode : su01d
and give the user name and excute it
i hope it will help you.
Ram
Edited by: Ram velanati on Jun 30, 2008 6:57 PM -
How can find out the User name?
Hi Gurus,
I have created one sales order with my user name. some one has changed order quantity in that sales order, so can u tell how can v find out thier user name?
CHeers,
SumithHi Sumith,
Go to VA02 and click on Environment at the top and click on changes. Now based on your line item where you feel changes have been made give your item number and tick overview , and additional info and execute.
Now double click where you want to drill down and find out for the user name.
I am sure this will help you. If it does dont forget to reward points for contribution.
Regards
Ravi
Maybe you are looking for
-
I am using Oracle Developer6.0 . I am facing problem with reports. I am invoking reports from form using run_product. 1. I could not able to save the report in text file . Whenever i try to save the report output in a text file.It gives dump and appl
-
[CS3 JS] Getting a page item by its script label
I have a text frame on a master page with its script label set. In my script, I am trying to get a reference to the text frame with this: var doc = app.activeDocument; var spread = doc.masterSpreads[0]; var tabFrame = spread.allPageItems.item("TabLef
-
Problem in UpdateStats(update database statistics)
Hello Experts, I am getting this problem while running job UpdateStats, job failed with this error in Job Log: BR0301E SQL error -20000 at location stats_ind_collect-3, SQL statement: 'BEGIN DBMS_STATS.GATHER_INDEX_STATS (OWNNAME => '"SAPSR10"', INDN
-
Hello: We currently use a 7301 router as an LNS and have it configured to use a local IP pool and dynamically assigns an IP address to connecting DSL modems. We would like to start providing a static IP to a username that autheticates to a radius se
-
Photoshop cs4 rectangle tool error
Hi I am using photoshop cs4. In my cs4, rectangle tool having a problem see this image