How to find out which field belongs to which table

Dear all
         How to find out this "Field name:-  LFSNR" belongs to which table.
regards
M.Chandra mohan

Hi
You can go to SE84.
ABAP Dictionary --> Fields --> Table fields
Enter field name and execute. You will get list of table where this field is exist.
hope it helps
regards
Srinivas

Similar Messages

  • How to find out which table store historical data for V_T001B?

    dear all,
    how i want to trace and find out which table that store all maintenance data history from V_T001B?
    thanks.

    i already find out into both table... but the data not store there...

  • How to find out which table/column is causing an error

    Oracle database 10gR1.
    Whiling running a process in a commercial software, I got an error "ORA-01858 A non-numeric character was found where a numeric was expected".
    Are there anyway I can check the log file in the database to find out exactly which table/field is throwing this kind error?
    Thanks.

    Are there anyway I can check the log file in the database to find out exactly which table/field is throwing this kind error?This is an application error & is not logged by Oracle by default in alert_SID.log

  • How to find out which Tables have been accessed without looking at the SQL query ?

    Hi,
    I would like to know is there a way to find out what queries have been executed and on which tables without looking at the SQL query.
    I have an old C++ code which calls some library functions to access the Oracle database. The source code for the library is not available to me yet. The functions selects/updates/deletes and inserts based on some input parameters I give. I do not know which tables it affects. How do I find out the actual SQL query and/or the tables it accesses ? I was told about V$SQL table that
    has the most recently executed queries, but
    I did'nt see any queries connected to my process.
    Could anybody help me on this ?
    Thanks
    Jagdeep
    [email protected]
    null

    PRECISE/SQL can help you if you have access to it
    2nd option can be that turn on SQL_TRACE
    Run executable of ur c++ program
    it will create a trace file in user_dump_dest
    and then using TKPROF u can see all quesries and their plan also.
    HTH
    Gagan Deep Singh
    <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by (jagdeeps):
    Hi,
    I would like to know is there a way to find out what queries have been executed and on which tables without looking at the SQL query.
    I have an old C++ code which calls some library functions to access the Oracle database. The source code for the library is not available to me yet. The functions selects/updates/deletes and inserts based on some input parameters I give. I do not know which tables it affects. How do I find out the actual SQL query and/or the tables it accesses ? I was told about V$SQL table that
    has the most recently executed queries, but
    I did'nt see any queries connected to my process.
    Could anybody help me on this ?
    Thanks
    Jagdeep
    [email protected]<HR></BLOCKQUOTE>
    null

  • How to find out which tables are modified recently

    Hello all
    How can we find the tables which have been modified recently.

    this is good for DDL, not for DML.
    You cannot do that easily for DML (updates). Rather, you could use Log Miner to analyze your logs.
    Regards
    Laurent

  • How to find out which keywords were used to create a smart album?

    Hi,
    I actually have 2 questions;
    a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
    b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
    Any clues?
    Thanks guys,
    Raphael
    <Edited by Host>

    b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
    Any clues?
    Raphael,
    that message may occur for four reasons at least:
    Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
    Apple Support Communities Terms of Use
    Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
    Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
    Or it is one  of the unexplained problems with the forum software right now.
    a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
    I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
    Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders.  In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
    My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
    I use the search field in HUD a lot, to filter the set of keywords shown.

  • How to find out which data control do the page layout components come from?

    hi,
    work in Jdev 11.1.2.3
    After have drag and drop data control into pages designer, how to find out which data control do the page layout component (such as a field in form layout) come from?
    --i cannot find data control related information in the property pallete for the page layout component.
    Regards.

    This information can be found in the page definition file.
    Select the field in the page and then click the binding tab.

  • How to find out important fields in table like MARA?

    How to find out important fields in a table for example like MARA?
    Details: In R/3 or ECC table for example MARA;
    1) How to find out what are the important fields?
    2)Does the table have only key figures not characteristics right?
    3) There are so many tables in FI; Can you please tell me what are the important tables?
    4) There is any easy automatic way to figure out that the particular datasource for example 2lis_02_item is pulling data from so and so table. I like to know the process not the results please.
    Thanks in advance.
    York.

    Hi York,
       Let me go by points:
    1. There is nothing like important fields ... The question could be Key fields ... the fields which identify a record uniquely ... If you go to SE11, and go inot the dispaly of MARA table ... you will see that there is tick mark under key to indicate that the field is a key field ... All the fields which are so marked would identify a record in the table uniquely. If your question is otherwise ... (Important fields) ... then it depends on the purpose you wnat to meet ... Some fields might be important for me but not for you ... so there is not hard nad fast rule for important fields.
    2. No... Tables in R/3 or ECC would contain both Key figures and characteristics.
    3. Important tables in FI would be BKPF, BSEG and BSET.
    4. The procedure for finding out which table are used by say 2lis_02_item would be different from that of other non LO/LIS extractors.
    In case of LO/LIS turn on the trace (below process) while populating the setup tables and for thoers while executing RSA3.
    1. Open one session and go to ST05, click on "Activate Trace"
    2. Open another session and execute the transaction you want to track for the tables it is going to hit.
    3. Go to the session of point 1 above and click on DEACTIVATE TRACE
    4. Click on DISPLAY Trace
    This will show you all the tables that were hit while extracting data. Point to remember here is ... it will hit some standard tables as well ... so you will have to filter out what is relevant from what is not.
    Hope this helps.
    best regards,
    Kazmi

  • How to find out which type of the driver is used in our application?

    Hi all,
    can anyone tell me how to find out which type of the driver is used in our application?
    Thanks in advance,
    Phoeniox

    Hi,
    Check out this...
    Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
    List drivers = Collections.list(DriverManager.getDrivers());
                   for(int i=0;i<drivers.size();i++)
                        Driver driver = (Driver)drivers.get(i);
                        String driverName = driver.getClass().getName();
                        System.out.println("Driver "+i+":::"+driverName);
    you need to load the driver and display in the same program.
    Then only you'l get the required result.
    prakhyath

  • How to find out which server is running on which port

    hi all,
    how to find out which server is running on which port, i want to know both
    from front end and backend?
    thanks and regards
    srikanth

    The best source to get all the ports you have is the Context Files.
    All ports are defined in the Context Files through "AutoConfig Variable". You can get the list of those variables by referring to the following note under "What is the port pool? What if I want to give a specific value to a Server Port?"
    Note: 216664.1 - FAQ: Cloning Oracle Applications Release 11i
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=216664.1
    You can also get that list via OAM.
    Referring to the installation log file should also be helpful (Unless you have changed any of the ports after the installation).

  • How to find out which job is calling package

    Respected sir,
    How to find out which job is calling my package. Please help me regarding this.
    Regards,
    user570124

    Please read about [url http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_util.htm#i997163]DBMS_UTILITY.FORMAT_CALL_STACK in the manual.
    or [url http://asktom.oracle.com/tkyte/who_called_me/index.html]this routine from Tom Kyte may be what you are looking for.
    Regards,
    Rob.

  • How to find out which plugin is missing ( embed width="100%" height="100%" messagecallback="parent.frames.MANIPULATIONS.AppendMessage" spinfps="15" spiny="30")?

    How to find out which plugin is missing fro mthe website: http://web.it.nctu.edu.tw/~twli/interactive/scr_tutf.htm?
    After looking at one similar question found in mozilla support and answered by jscher2000 (https://support.mozilla.org/en-US/questions/957655), I have found out I have to look for either &lt;object or &lt;embed. What I found is : &lt;embed width="100%" height="100%" messagecallback="parent.frames.MANIPULATIONS.AppendMessage" spinfps="15" spiny="30"
    What do I have to do now?

    This big1.mol (and possibly big2.mol) file is loaded in the embed plugin object that is opened in a iframe, so you can right-click the plugin area to check the embed code.
    *http://web.it.nctu.edu.tw/%7Etwli/interactive/big1.mol
    *http://web.it.nctu.edu.tw/%7Etwli/interactive/big2.mol

  • How to find out which Badi is triggering in which transaction

    Hi SAP gurus,
    Can any one tell me How to find out  which Badi is triggering in which transaction.
    If I have a BADI . I want to know in how many transaction it will trigger.
    Can you help me in this issue. Its very important and urgent.
    Points will be rewarded.
    Thanks,
    Satish.

    Hi Satish,
    Check this blog -
    /people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
    Check Clemens reply in this thread, its great-
    BADI
    <b>Reward Points if this helps,</b>
    Satish

  • How to find out which object on a JPanel was clicked...

    I have a JPanel that contains about 200 other small JPanels(only 8 are visible at any one time), and a JButton(with Visible set to false).
    When one of the small JPanels is rightclicked i want to know which one was clicked so I can add the JButton to it (set theJButton Visible on the JPanel that was rightclicked). When the JButton is clicked, it will hide the JPanel it was on and hide itself again.
    I added a MouseListener(MousePressed) to the main Jpanel but I dont know how to find out which of the smaller JPanels was clicked. I would Also need to know how (in the ActionEvent for the JButton) the JButton knows which JPanel it is on so it knows which one to delete.
    ------------------------------------------------------------------CODE
    void JPanel1_mousePressed(MouseEvent e) {
    if ((e.getModifiers() & e.BUTTON3_MASK)!=0){
    ------------------------------------------------------------------CODE
    void JButton1_actionPerformed(ActionEvent e) {
    ------------------------------------------------------------------CODE
    Can this be done or should I add a MousePressed Listener to each of the 200 small JPanels and create a JButton for each of them??
    Any Info Appreciated... Thanks....

    Here you get a hint, hope have added all mouseListener as well and registered....addMouseLi...etc
    // many JPanels here...
    JPanel clickedPanel;  // a reference only
    // In mouse Click..
    public void mouseClicked( MouseEvent e ){
              clickedPanel = e.getSource( );
              clickedPanel.add(new JButton("Look, I am Added") );
    }  // it is Only HINT, a working HINT

  • How to find out Which SAP programs are affecting Which Z programs?

    Do we have a program/tool that can tell us the following:
    How to find out Which SAP programs are affecting Which Z programs in the entire development server?  
    We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level. 
    We need are looking for something a little larger u2013
    thanks in advance
    Vishnu

    Do we have a program/tool that can tell us the following:
    How to find out Which SAP programs are affecting Which Z programs in the entire development server?  
    We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level. 
    We need are looking for something a little larger u2013
    thanks in advance
    Vishnu

Maybe you are looking for