How to find out which keywords were used to create a smart album?

Hi,
I actually have 2 questions;
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Thanks guys,
Raphael
<Edited by Host>

b) With annoying regularity when I try to get to this forum and choose Aperture, I get the following message - in pink, no less: It appears you're not allowed to view what you requested. You might contact your administrator if you think this is a mistake.
Any clues?
Raphael,
that message may occur for four reasons at least:
Most frequently, when you are using an outdated link to a post that no longer exists, for example from an email notofication. Sometimes our community host will remove posts, that are in violation of the terms of use: see:
Apple Support Communities Terms of Use
Or you are using the edit button or a bookmark to an "Edit" window, after the fifteen minutes allowed for editing are up.
Or you want to view a page in a restricted section of the ASC - soem perta are only open for members of level 6 or higher.
Or it is one of the unexplained problems with the forum software right now.
a) Short of scrolling down my very long list of password on the HUD - is there an elegant way to do it - How to find out which passwords were used to create an existing smart album? It's a recurring challenge for me.\ 'cause I like using smart albums, but once in a while need to check or chane the passwords.
I really like Kirby's suggestion with the IPTC rule Keyword is. This is very useful for smart albums global to the library.
Frequently a different approach helps for my smart albums. Many of my smart albums are local to projects or folders. In this case the smart HUD will only show those keywords that have been used for the images in the selection. So if I only have tagged the images with the keywords "birds" and "slideshow", the smart settings HUD will only show these two keywords and the list is very short.
My Keywords HUD, is organized hierarchically; this way I can collapse large sections at once, and it is easier to focus on the keywords needed for a specific task.
I use the search field in HUD a lot, to filter the set of keywords shown.

Similar Messages

How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?

Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.

You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level.

ADF table: How to find out which rows were modified by the user

Hi,
I am using ADF table to display data that can be modified by the user (ReadOnly = false in the input text). I need to find out which rows were modified by the user, and only update (persist) those rows in the database.
Is there an easy way to find out which rows were modified by the user.
I am NOT particularly concerned with which columns were modified as I would update the entire row (if any data in that row is modified).
I am using Oracle JDeveloper version 11.1.1.3.
Thanks,
Ash K

Thanks Timo.
I am using ADF Data Control (which are created from Web Service proxy) to display/update the data.
In the backing bean, the operation that is invoked at the time persisting data is as follows:
public void commitOperation {
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("operationA");
DCIteratorBinding dciter = (DCIteratorBinding)bindings.get("someIterator");
for(int i=0; i<dciter.getViewObject().getEstimatedRowCount(); i++)
Row row=dciter.getRowAtRangeIndex(i);
SomeObject someObject= new SomeObject ();
someObject.setAttr1(row.getAttribute("Attrbute1").toString());
someObject.setAttr2(row.getAttribute("Attribute2").toString());
objectList.add(someObject);
operationBinding.getParamsMap().put("param1", objectList);
ResultObject result = (ResultObject) operationBinding.execute();
Inside the for loop (or any other place in the backing bean), I would like to figure out if the row was modified by the user. Please let me know if how to get that. If ADF provides this automatically, that would be GREAT.
Thanks,
Ash K

How to find out which lists are using email enabled feature in my SP 2010? Any script? Anything else?

Hi there,
How to find out which lists are email enabled in my SP 2010?
Any script? Anything else?
Thank you.

Hi frob,
check this script that is stated on this link
$SPwebApp = Get-SPWebApplication "http://migration.Company.com"
<# If it is MOSS 2007, You can use:
$SPWebApp = [Microsoft.SharePoint.Administration.SPWebApplication]::Lookup(http://sharepoint.com)
To get SPWebApplication Object
#>
#create a CSV file
"E-Mail,List,Site" > "EMail-Enabled.txt" #Write the Headers in to a text file
foreach ($SPsite in $SPwebApp.Sites) # get the collection of site collections
foreach($SPweb in $SPsite.AllWebs) # get the collection of sub sites
foreach ($SPList list in $SPweb.Lists)
if ( ($splist.CanReceiveEmail) -and ($SPlist.EmailAlias) )
# WRITE-HOST "E-Mail -" $SPList.EmailAlias "is configured for the list "$SPlist.Title "in "$SPweb.Url
$SPList.EmailAlias + "," + $SPlist.Title +"," + $SPweb.Url >> EMail-Enabled.txt #append the data
http://www.sharepointdiary.com/2011/06/find-all-incoming-email-enabled-lists.html
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation. Please remember to mark the reply as answer if it helps.

How to find out which BADIs are used

Hi Experts,
Is there any tcode where I can give the transaction or program name and find out which BADIs are used in that transaction.
thanks
sankar

Dear Sankar,
You can first check available BAdis and then go to SE19 to see what all have been implemented.
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Hope this will help.
Regards,
Naveen.

How to find out which feed is used by iTunes

Hi!
I've tested several feeding methods before i made submitted my podcast to itunes store, now i don't know which feed is used by itunes..
Is there a way to determine this?
Thank you!

The image which appears in the Store is referenced in the feed, but the images which appear when you select each episode after subscribing are not - they have to be actually embedded in the media files. Please see this page:
http://www.wilmut.webspace.virginmedia.com/notes/coverart.html
I'm not sure there is anything you can do about the text display in the Store if it isn't recognizing the characters. Are you using the actual characters in the feed or the html code equivalents? (although I don't see code for what you have, only for o and u with umlauts, e.g. ö = ö ). I rather suspect that the Store isn't using a font setting which will allow this.

How to find out what software was used to create a document?

Hello:
I was sent a file to work with and it was supposedly made using a Mac computer, but I can't open it. How can I find out what program was actually used to create this document. It ends with xxxxx.rsrc. I even tried to open it on my PC and it says there is no default application specified to open the document.
Thanks for your help.
Susan
Mac OS X (10.4.7)

Have you tried opening your file with Textedit?
Also, if you select the file from the Finder and type cmnd-I (Get Info), it should tell you what program can be used to open it.
Lita

How to find out which connection is used for access to Bex query?

Hello,
in our BO 4.0 environment we have a lot of different connections to Bex queries.
There exist more connections to one Bex query.
For example to Bexquery1 we can access with 2 connections, connection : BX1 (connection specific for one query) and connection DEVcubes(generic connection to all cubes)
How can I check in Webi report over Bex query which connection is currently used?
Thanks a lot !
Rudolf

Hi Rudolf,
Your requirement can be achieved using QueryBuilder.
Please refer to following QueryBuilder step-by-step post by Manikandan:
http://scn.sap.com/community/bi-platform/blog/2012/10/11/businessobjects-query-builder-queries
In bove post, Go to Universe Queries section -> All webi report using one connection
In case you dont know how to use QueryBuilder, please refer to following post:
http://scn.sap.com/docs/DOC-42952
Please let us know if you get any doubt.

How to find out which User id used to import Transport Request thru STMS ??

Dear Experts we have 6 BASIS Consultants in our org with STMS authroizations.
In every day we review Imported Transport request thry Import History Option in STMS.
Our requirement is which request is imported by which BASIS Consutlant thru STMS?
Thanks for your replies in advance
Regards

Hi,
You should be able to see the "owner" of a transport request under the import history in STMS. If you need the user too you can choose the menu "Edit --> Display More".
Best Regards,
Srividya.R

How to find out names of reports using a particular view

hi guys,
i am newbie here, i jsut want to know how to find out which reports are using a particular view
many thanks in advance for your help

If you go to the Properties for the Folder in Discoverer Administrator, there is a Dependents tab that should list any workbooks using the folder. This only works for workbooks saved to the database, so won't help with any created using Discoverer Desktop. If you are gathering statistics and have the The Discoverer V5 EUL business area and its workbooks installed, it can tell you about Folders Used as well. It contains information about queries run whether the workbook is saved to the database or to the file system, but wouldn't contain inforamation about workbooks that had been created but not run.

How to find out which type of the driver is used in our application?

Hi all,
can anyone tell me how to find out which type of the driver is used in our application?
Thanks in advance,
Phoeniox

Hi,
Check out this...
Class.forName("com.mysql.jdbc.Driver"); //if u r using MySql
List drivers = Collections.list(DriverManager.getDrivers());
               for(int i=0;i<drivers.size();i++)
                    Driver driver = (Driver)drivers.get(i);
                    String driverName = driver.getClass().getName();
                    System.out.println("Driver "+i+":::"+driverName);
you need to load the driver and display in the same program.
Then only you'l get the required result.
prakhyath

How to find out which sequence a certain column used?

you konw column C in table T is created by a sequence.
How to find out which sequence column C is using?

In the meantime I think it ought to becompulsory to
only assign sequence values in triggers.
Why? I can see no good reason for this. I think it's a good idea to have stuff like this
coded in only one placeI don't like your argument for compulsory using triggers for sequences for exactly the same reason as you, ie that I like to keep my code in one place. If I'm reading some pl/sql code which uses a sequence I like to see the fact that the sequence is used in the pl/sql code, rather than to check to see if theres a trigger on the table and then see which sequence that uses.
"naming conventions can work, provided they're enforced. Alas, like other standards, they can only be enforced by active policing".
Thats what code reviews are.
" there is also the special case of one sequence populating more than one table...."
This is My Pet hate. I don't think there's ever a case where this is absolutely necessary. Again code reviews
Unfortunately I have to live with a system which does this.
and I appreciate we can't all have code reviews, etc.

I have my personal music (not purchased from Itunes) stored in two locations, on my PC and on an external HD. How can I find out which directory itunes uses to access this music? I am using Itunes version 11.4.0.18. Thanks

I have my personal music (not purchased from Itunes) stored in two locations, on my PC and on an external HD. How can I find out which directory itunes uses to access this music? I am using Itunes version 11.4.0.18. Thanks

Many thanks JEM24 for your help. Ive just spent the best part of six hundred pounds on a new Sony Rx100m2 compact camera, so I have no interest in the Ipods camera at all really. I doubt Ill be watching many videos on it as Im very lucky in that I have a good Android tablet. Its more as a stock music player that Ill be buying the Ipod for, if indeed I do end up buying one. I dont like the idea of paying the exorbitant amount added for more memory space that Apple along with most other companies charge. In fact I read an article on this very subject just yesterday in the tech section of Flipboard. It stated in the article that in the case of the Iphone the actual cost of each additional gigabyte of storage to Apple et al is something in the order of 60p.. This is certainly not reflected in the price us the customer has to pay at the till.. Its for this reason primarily that Apple in particular, because their products do not allow adding expandable memory of your own in the form of cheap to buy cards, that nobody in their right mind buys the 64gig etc Iphones..I am aware that we are discussing my potential purchase of an Ipod Touch here but you see my point. Many thanks again though for helping me.

How do I find out which instruments are used by software instrument loops?

This isn't so much a problem, it's just something that's been bugging me - how do I find out which instruments are used by the software instrument loops?
Usually clicking on a track will bring up the instrument name in the track info pane, but if I do this after importing a software instrument loop into my song it doesn't show anything. Any ideas?
PS I have used the search function so I apologise in advance if there's an obvious answer.

in track info, under details, the instrument being used is displayed in the generator popUp menu

How find out which user is using which company code?

Hi Gurus,
I am having more than 500 users in Production System.I need to find out which user is using which company code?I can get the roles and users separately from two different SAP tables.
Is it possible to get it from a single table or Tcode?
Best Regards,
Rahman

Hi,
Thanks for the update.Yes I tried with SUIM.But I was unable to find any clue.
Regards,
Rahman

How to find out which keywords were used to create a smart album?

Similar Messages

Maybe you are looking for