How to find Safari plug-in installed on a specific date?

I posted this question in the wrong community, so am re-posting here.
I want to remove a Safari plug-in. I know how to find the plug-ins that have been installed (Safari > Help > Installed Plug-Ins), but the names of the plug-ins mean nothing to me. I do know, however, when the plug-in (the one that I want to remove) was installed. Is there a way to see the list of installed plug-ins by install date? Thx

Do you back up with Time Machine? If so, scroll back through the snapshots of the plugin folders until you find the most recent change.

Similar Messages

How to find list of languages installed in the SAP system?

Hi All,
Please tell me, how to find list of languages installed in the SAP system?
Thanks and Regards,
Kumar.

Hi Virgo Rhyme
Hope the following info will be helpful
3rd - SAP is the 3rd largest software company in the world
30,000 - Total number of people employed by SAP
5,400 - Number of programmers employed by SAP
$7.024 billion - FY03 Revenue
$1.077 million - FY03 Net Income
12,000 - Number of companies using SAP
79,800 - Number of SAP installations
12,000,000 - Number of people using SAP
120,000,000 - Total number of people in the 12,000 companies who are using SAP
28 - Number of languages supported by SAP
46 - Number of country-specific versions of SAP
22 - Number of industry-specific versions of SAP
1,000 - Number of pre-defined best practices contained in the SAP system
10,000 - Number of tables requiring configuration in a full SAP implementation
55,000 - Number of SAP experienced consultants worldwide
28 - Number of years ago SAP was started
Reward if helpful
Regards
Lakshman

How to find out if someone installed a keylogger on my iPad 1

How to find out if someone installed a keylogger or malware on my iPad 1 with step by step directions for dummy's?

Is your iPad jailbroken ? If not then I'm not aware of any malware, viruses or keylogging software that could have been installed on it.

How to find Oracle drivers are installed in WAS

Hi
I am doing Proto type application using webdynpro.I want to create tables in Oracle database,because WAS is installed on Oracle.Now i went to Visual Admin tool and checked the "JDBC Connector" properties.I tried to create the new 'DataSource".While creating DataSource ,it is asking me DriverName,Driver ClassName,Version.I have following questions:
1.How to find the wheather Oracle drivers are installed or not?if not where to get these drivers?
2.Once DataSource is created ,how to test wheater it is working fine or not?please help
Thanks
Prasad

Hello Prasad,
Don't create a new datasource, but create a datasource alias for the existing SAP<sid>DB datasource with your new name.
(remember to restart the j2ee cluster)
Then in your application instatiate the datasource and use your create/update/select statements.
Once this is set up test from your java code as follows:
InitialContext ic = new InitialContext();
DataSource mySource = (DataSource)ic.lookup("java:comp/env/jdbc/YourDataSource");
or.. DataSource mySource = (DataSource)ic.lookup("java:jdbc/YourDataSource"); (can't remember which of the 2 worked)
if this throws a NamingException, then your alias doesn't work, or perhaps you forgot to restart the cluster.
After this executes successfully, use the datasource freely.
Connection con = mySource.getConnection();
con.executeQuery
con.executeUpdate
con.executeStatement
ect...
And forget about oracle, sapdb, informix, db2, or whatever drivers. This makes your application portable and independent from the DB layer.
Please feel free to reward points if this solves your problem.
Best regards,
Homer Vargas

How to find which type of installed (CS3)

I have question.
because our office have 25 computers was installed difference volume media.
(6x desgin standard, 4x design prem, 4x web standard, 11x web prem)
my boss ask me to verify that computer(s) installed Adobe Creative Suite 3 (which type of that...)
(1) How to find this is which type (desgin standard, design prem, web standard, web prem)
(2) also, how to known that "CS3", "which type of that" include what part(s) ?
any advince please!

Try looking in Control Panel/Add remove programs.

BCT - how to find the difference between installed BCT and the newest BCT?

Hi,
How do I find the difference between installed BCT and the newest BCT?
or find a description of the newest BCT?
Thank you.
- Gunnar

Hi,
Thank you for your answer.
I am aware of the possibilities you mention.
I am looking for a way to find the parts of the business content that has been modified since I installed our current version WITHOUT installing anything.
That is for example:
If F&R business content has been moved from 3.x technology to 7.0
If there is changes to the F&R content at all
-> if our current version of business content already contains the newest version of Business Content for F&R, then it is not a prerequirement to an F&R project that we update business content.
The possibility to see that the only changes might be in the area of SAP HCM ...
Thank you.
- Gunnar

How to Find whether JRE is installed in a system or not ?

I have to write an application in which I want my app to find whether jre is installed or not ?
Can any one help in this ? My E-Mail ID is
[email protected]
Kumanan.

For windows OS this is the solution.
Find out the following key in the registry.
HKEY_LOCALMACHINE/Software/javaSoft/Java Runtime Environment
if the key to javasoft is there then JRE is installed and to see the version of JRE look a level down further and you will find the versions.

How to find whether Oracle is installed on any server or not.

Hi,
I am trying to use the following command to check if Oracle is installed on any Unix server or not. I am not sure whether it is right way or not. If not, is there any other way to find installation of Oracle or not?
find . -name oraInst.loc >>/tmp/`uname -n`-swinv.txt
Thanks
Vipin Gupta

Every installation of Oracle RDBMS in *nix will contain a bin directory in which you find the oracle executable which must be setuid to the 'oracle' owner.
The inventory doesn't need to exist.
The oraInst.log doesn;t need to exist
The above are created when the Oracle Universal Installer has been used.
The oratab doesn't need to exist.
The above exists when the dbca has been used or the DBA was smart enough to plan for oraenv.
However, every Oracle database needs the oracle executable, named oracle, in the ORACLE_HOME/bin directory, and that must be owned by a userid in the 'OS_DBA' group - usually dba. So
find / -name oracle
to find that, and then check whether it is in a ?/bin directory, and finally verify that it is setuid to the owner and setgid to the group.
Of course that is the tip of the oracle iceberg - Oracle has a whale of a lot more products and the question to find whether 'Oracle' is installed might include Oracle App Server (look for opmnctl in ?/opmn/bin for the full install of Oracle App Server, or ?/bin/oc4j for just the J2EE engine) or Oracle JDeveloper (look for ?/bin/jdev) and so on.
In Windows, append .exe to the search target.

I have trouble finding the drivers to install a PCI-6024E data acquisition device.

I can't find which drivers I should get to install a PCI-6024E data acquisition device. I had NI-DAQ 7.1 and I just upgraded to version 7.2, but it still doesn't work. From what I read, this is a plug-and-play device, so, if the drivers are in my computer, Windows XP should be able to complete the installation without any problems; we have a PCI-6110, which was re-installed correctly.
Any help would be greatly appreciated.

Hello,
NI-DAQ is the correct driver for the PCI-6024E and PCI-6110 devices. Since you have two devices, you should try a combination of installations to see if you can narrow down the problem to a possible damaged board.
What I mean by this is the following:
Install the 6110. If it works, pull the device and plug the 6024E into the same PCI slot and see if it works. If it does not, then you may want to consider calling National Instruments at 866-275-6964 and requesting a Return Material Authorization to get your device repaired. If you call in, you will probably be asked to go through a few more troubleshooting steps with an Applications Engineer to try and determine exactly what it is that might need to be repaired.
If it does work after perfoming th
e above test, post back to his discussion so we can troubleshoot further.
Jared A

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

How to find table with colum that not support by data pump network_link

Hi Experts,
We try to import a database to new DB by data pump network_link.
as oracle statement, Tables with columns that are object types are not supported in a network export. An ORA-22804 error will be generated and the export will move on to the next table. To work around this restriction, you can manually create the dependent object types within the database from which the export is being run.
My question, how to find these tables with colum that that are object types are not supported in a network export.
We have LOB object and oracle spital SDO_GEOMETRY object type. our database size is about 300G. nornally exp will takes 30 hours.
We try to use data pump with network_link to speed export process.
How do we fix oracle spital users type SDO_GEOMETRY issue during data pump?
our system is 32 bit window 2003 and 10GR2 database.
Thanks
Jim
Edited by: user589812 on Nov 3, 2009 12:59 PM

Hi,
I remember there being issues with sdo_geometry and DataPump. You may want to contact oracle support with this issue.
Dean

How to find from which table we r fetching the data

Hi friends,
i got a requirement to design a query,in my transfer rules i check the info object related to the fiels.but in my crm the field name is different.
how to find from which table the field is fetched........
please tell me........
Regards
sridath

Dear Sridath,
In ST05 switch on the SQL Trace.
Goto RSA3.
Give your DataSource name > Execute
Goto ST05...Switch OFF the Trace
Analyze the Trace file
Gives you details about the fields and Tables from where you are fetching.
OR
Goto LBWE
Find your DataSource > Maintenance > Display mode
In right side window...expand ALL list box...
Exclude MC and take other words...they are the Source Tables.
Regards,
Ramkumar.

How to find Table Name and Field Names given a Data Source

Hi,
I tried ROOSOURCE table in R/3 to find the Extract Structure and Extractor names for a specific data source, let us say 2LIS_02_ITM (PO Item Level).
I know the extract structure for this data source is MCO2M_0ITM
I am not able to find where this structure is extracting the data for every field.. I wanted to know the corresponding table name and the respective field names.. Both the existing and Appended fields..
Thanks,
Naren

Hi,
Check in in LBWE and Click on Maintenance and see the table names
EKKO
EKPA
EKPO
Tables are use for this DS
Eg:
MCEKKO BEDAT Document Date
MCEKKO BSART Document Type
MCEKKO BSTYP Doc. Category
MCEKKO BUDAT Accounting date
MCEKKO EBELN Purchasing Doc.
MCEKKO EKGRP Purch. Group
Note: here EKKO is table
https://wiki.sdn.sap.com/wiki/display/BI/BW%20SD%20MM%20FI%20DATASOURCES
thanks
Reddy
Edited by: Surendra Reddy on Mar 10, 2010 8:18 AM
Edited by: Surendra Reddy on Mar 10, 2010 8:19 AM

How to full restore OS X state to a specific date from Time Machine backup?

Hello! Could someone please advice how to restore the state of my iMac to a specific date?
NOT to the latest backup?

The only way I found to make a full restoration of OS X to specific date from a TM backup is to launch OS X in recovery mode (Cmd+R during startup) and then choose "Recover from Time Machine". Full restoration took approx 2 hours.
Dislike it very much. During my being a Windows user I could roll back in a matter of minutes with system utilities

How to find out jre version installed ,using a java program?

Hello,
Is there any way to find out the installed JRE version using a java program ?
The requirement is as follows:
There is a html page with 4 steps to install a software. each step is a link, which upon clicking does its work.
the first step is to install jre 1.4.2_11 if its not installed in the system. But how can i find out whether jre 1.4.2_11 is installed or not ?
Thanks in advance

For the hell of it... here is a list of properties you can query:
java.version Java Runtime Environment version
java.vendor Java Runtime Environment vendor
java.vendor.url Java vendor URL
java.home Java installation directory
java.vm.specification.version Java Virtual Machine specification version
java.vm.specification.vendor Java Virtual Machine specification vendor
java.vm.specification.name Java Virtual Machine specification name
java.vm.version Java Virtual Machine implementation version
java.vm.vendor Java Virtual Machine implementation vendor
java.vm.name Java Virtual Machine implementation name
java.specification.version Java Runtime Environment specification version
java.specification.vendor Java Runtime Environment specification vendor
java.specification.name Java Runtime Environment specification name
java.class.version Java class format version number
java.class.path Java class path
java.library.path List of paths to search when loading libraries
java.io.tmpdir Default temp file path
java.compiler Name of JIT compiler to use
java.ext.dirs Path of extension directory or directories
os.name Operating system name
os.arch Operating system architecture
os.version Operating system version
file.separator File separator ("/" on UNIX)
path.separator Path separator (":" on UNIX)
line.separator Line separator ("\n" on UNIX)
user.name User's account name
user.home User's home directory
user.dir User's current working directory

How to find Safari plug-in installed on a specific date?

Similar Messages

Maybe you are looking for