How to find the Configuration Change History in GRC 10

Hi All,
Any one idea about Configuration settings (TCode =SPRO) change history in GRC 10 ?
I need to know, if any one change in Parameter settings or Connector settings in GRC10
1.I have tried with table DBTABLOG and CDHDR.
2.I have tried with front end Change log and Audit Logs options in Reports and Analytics
But i am not getting required output
Please help me regarding this
thanks,
Suresh

Hi Alessandro
I know this table,But in this table we can see the list of parameter ,But i want to see when this parameter is inserted/changed/updated with date and time
Ex :
Param :1028
I need this info
1.When this param (1028) is inserted ?
2.Any change made on this Param 1028 ?
3.If any change happened on this param 1028, Who made the change and when its changed(date and time)?
we didn't find these info with this table GRACCONFIGSET
thanks,
Suresh

Similar Messages

  • How to find the recent changes done in the workflow by user id ?

    Hello all,
    How to find the recent changes done in the workflow by user id ?
    I have made changed in Production system .
    Like changing the status ,
    changing the agent ,
    but for these it will , not ask for any request .
    So i want to know is there any method to find what are the changes done by me ?
    Thanks and regards
    Prem

    Hi,
    This is caused by mandant settings in scc4. It's better not to make changes in PRD, because then your DEV en QA systems differ.
    Kind regards, Rob Dielemans

  • How to find the configuration use the Z message class.

    Usually when I do some configuration, it may need to create some message. such as the Validation.
    It raise a message when I run some standard t-code. So when I check some Z message class to find what program use this message, i can not find anything. So I assume there might two situation:
    1、we can not trace it dome when the program didn't write like this way:    MESSAGE E003(ZFI).
    2、this message might be used in some configuration,not in program.
    so how do we find the configuration use this message? or Is there any way can trace all message ?
    Thank you so much for your sincere answer.

    Hi,
    Case 1:  Message is defined correctly with message number & message class.
         Example - Message E003(ZFI).
      Easy to locate the message using whereused list.
    Case 2 :
    There are some FM's like BALW_BAPIRETURN_GET where we pass the message details.
    For example : 
    call function 'BALW_BAPIRETURN_GET'
            exporting
                 type       = p_message-msgty
                 cl         = p_message-msgid
                 number     = p_message-msgno
                 par1       = p_message-msgv1
                 par2       = p_message-msgv2
                 par3       = p_message-msgv3
                 par4       = p_message-msgv4
    *          LOG_NO     = ' '
    *          LOG_MSG_NO = ' '
            importing
                 bapireturn = p_return
            exceptions
                 others     = 1.
    In these case, we won't be able to track the message number from where used list.  So, what we do is before calling these FM we use the below statement,
      IF 1 = 2. message e003(zfi). ENDIF. 
        so that message can be tracked using where used list.
    Case 3: Some messages can be configured in message control.( Table T100S ) . For those
      messages we search for table T100S in the program.
    Regards,
    DPM

  • How to find the configuration status of REDO logs files?

    I am in the process of moving the redo log files.
    Before that I want to find out whether it is set up as duplex or any other configurations.
    How to find the REDO log configurations.
    Oracle 10g R2
    Thank you,
    Smith

    Example:
    Not duplexed redo log - if number of member is 1, then it is not duplexed:
    SQL> select group#, members from v$log;
        GROUP#    MEMBERS
             1          1
             2          1
             3          1
    SQL> select group#, member from v$logfile;
        GROUP# MEMBER
             1 /u01/app/oracle/oradata/db1/redo01.log
             2 /u01/app/oracle/oradata/db1/redo02.log
             3 /u01/app/oracle/oradata/db1/redo03.log
    SQL> alter database add logfile member '/u01/app/oracle/oradata/db1/redo01_2.log' to group 1;
    Database altered.
    SQL> alter database add logfile member '/u01/app/oracle/oradata/db1/redo02_2.log' to group 2;
    Database altered.
    SQL> alter database add logfile member '/u01/app/oracle/oradata/db1/redo03_2.log' to group 3;
    Database altered.Duplexed redolog
    SQL> select group#, members from v$log;
        GROUP#    MEMBERS
             1          2
             2          2
             3          2
    SQL> select group#, member from v$logfile;
        GROUP# MEMBER
             1 /u01/app/oracle/oradata/db1/redo01.log
             2 /u01/app/oracle/oradata/db1/redo02.log
             3 /u01/app/oracle/oradata/db1/redo03.log
             1 /u01/app/oracle/oradata/db1/redo01_2.log
             2 /u01/app/oracle/oradata/db1/redo02_2.log
             3 /u01/app/oracle/oradata/db1/redo03_2.log

  • How to find the shape change of a curve

    Dear All,
    I need to find the point where the curve got deviated. I Tried Calculating Slope It Is Not useful. Share Some Ideas to sort out this problem.
    Find the attached vi and the TDMS file read the file with default group name and let me know the result.
    Thanks and regards,
    Rams.
    Attachments:
    Test.vi ‏38 KB
    Testdata.zip ‏293 KB

    You don't define what you mean by "deviate". Deviate from what? From zero? From a straight line?
    Your curve has a couple of places where the slope changes, can you tell us which one you want?
    First is it horizontal, then
    starts sloping upward. (x=~1.0)
    changes in slope (x=~1.4)
    another change in slope (x=~1.9)
    In what way is calculating the slope "not useful"?
    LabVIEW Champion . Do more with less code and in less time .

  • How to find the previous changed pay for an employee

    Hi,
    I have to get the previous changed pay for an employee.
    The problem is if the user enters a date range and if there is no change in the pay rate then i need to get the previous pay which is different from the current pay.
    HR experts please help on this.

    Please, read this weblog....
    <a href="/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports to deal with HR Payroll reports</a>
    Greetings,
    Blag.

  • How to find the Customer changes made to the standard transaction C223

    Hi,
    Greetings !
    My customer wants to find out whether any customer changes has been made to the standard transaction C223.
    As there is Badis, Programs, Function Group and its a kind of linked list going on.. on an on ...
    Could you please let me know that is there any easy way to find out whether Customer changes has been done to the standard transaction C223.
    (if not)
    Is there a way to find it manually or using some alternative ways.. ? My point is I should want to confirm it to the minute detail and finally confirm whether transaction is changed or not.
    Thanking you in anticipation.
    Thanks & Best Regards,
    L Raghunahth

    Hi,
    Thanks for the reply.
    Actually I want to list out all the programs functional modules, tables data elements etc responsible for the transaction C223.
    is there any program or transaction which will give me all the details.
    Thanks and Regards
    L Raghunahth

  • How to find who has changed SQL Server Agent 'Job History' settings.

    Hi all,
    I was searching from couple of days to know is there a way to find out who has changed the SQl agent property settings.
    Like if someone unchecks the SQL Agent History settings how i can find who has done that change?
    I searched for trace flags but there is nothing related to it, i searched for system tables and views of msdb but nothing which can give this information, even didn't find any audit setting that can monitor these activities.
    My sql version is SQL Server 2008. Please throw your ides on how to track the sql agent history setting changes!!!
    Thanks In Advance!!!!
    VVinayPrasad

    Hi,
    You might be able to AUDIT the execute on that SP but its not giving exactly what has been changed... i guess you are getting what i am looking for...
    whatever the property might be changed it only shows the sp name thats it.... but not the exact sql statement executed on background
    VVinayPrasad
    First of all: It's not about me, it's about you. And it's not a might, its a given fact. I
    tested it for you.
    Second: your question was:
    >>I was searching from couple of days to know is there a way to find out
    who has changed the SQl agent property settings.
    >>Like if someone unchecks the SQL Agent History settings how i can find who has done that change?
    So please first clear up, what you really need.
    Third: instead of Auditing I already gave the advise to use Tracing (be it SQLTrace or Extended Events). Both will give you the exact statement. SQLTrace may be easier on SQL2008
    Please try all of the provided first before doing guesswork.
    Andreas Wolter (Blog |
    Twitter)
    MCM - Microsoft Certified Master SQL Server 2008
    MCSM - Microsoft Certified Solutions Master Data Platform, SQL Server 2012
    www.andreas-wolter.com |
    www.SarpedonQualityLab.com

  • How to load the boot menu using the command line , after the configuration change ?

    how to load the boot menu using the command line , after the configuration change ?

    Hi @Bask-48 
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp you are trying to change the boot order.  Here is a link to Configuring the Boot Order in the System BIOS
    that will assist you.
    Good Luck and Happy Holidays!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • How to find the history of the sales order

    hi
    how to find the history of the sales order

    the history can be of two types:
    1) Changes to the Document:
        The changes made to the sales order which can be viewed using:
        Menu-> environment -> changes.
       the changes to the documents are shown from Change documents with selection on
       tables CDHDR with objectclas = 'VERKBELEG' and objectid = <document number>.
    2) Preceding or Follow-on Documents:
        The document flow for the sales order which can be viewed using:
        Menu-> environment ->Display Document flow.
        this is obtained from the table VBFA.
       Hope this solves ur Query.
       Please award points if u feel the answer was useful.
       thanks,
       Nivin Joseph
    Message was edited by:
            Nivin Joseph Varkey

  • How to find the workflow for Change Request for the PO's

    Hi All,
    We have a PO which is pending and we can't receipt it again nor make payment on this. After checking the Approval history for that PO we found that the change request has been made. The change request was to change the amount to be paid to R39196 instead of R58237.00. We don't know where to check the workflow for the change request to identify the cause.
    what i need to know is how to find the workflow for that change request? The other workflows can be checked using the po_header_id for the PO's but i am confused with the change request workflow
    Your input will be highly appreciated.
    Thanks in advance
    Rgds,
    Sonia

    For 11.5.10.2 run this query to determine the keys to search on:
    Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'PO' and Document_num = 'put-PO-number-here'
    Then use the keys returned by the query to look up the Workflow in
    Workflow Administrator Web Applications / Administrator Workflow / Status Monitor
    Search using the results returned in fields "Type Internal Name" and "Item Key" in Status Monitor
    The query for change requests on a specific Requisition would be:
    Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'REQ' and Document_num = 'put-Req-number-here'

  • May i ask how to find the history website from safari in the new Mavericks?

    may i ask how to find the history website from safari in the new Mavericks?

    Choose Show All History from the History menu.
    (93509)

  • How to find the reports/Txs that are affected by changes made in NA30

    Hi All,
    Does anyone know how to find the reports and transactions that are affected by ISH Billing (Interim Billing /Final billing) in hte Tx NA30. I need to modify the some functiionality of Interim billing at NA30 and still maintain the consitenecy of NA30.
    Many thanks & Regards,
    Vijaya

    No idea about any such report but from SAP help got following list of billing reports. It might be helpful
    RNAABGR0 IS-H: Revenue Accrual
    RNAABRKZ IS-H: Change Billing Indicator of a Case
    RNABD000  IS-H: Patient Billing
    RNABILB0   IS-H: Change Billing Block via Conditions
    RNABILB1   IS-H: Change Billing Block via Conditions (Outpatient Cases)
    RNADIN03   IS-H: Billing Document Mass Print Program
    RNAFSPER  IS-H: Change Billing Block
    RNANFAL0 IS-H: Set Cases Without Billable Services to "Final Billed"
    RNANFAL1 IS-H: Set Outpatient Cases Without Services to "Final Billed"
    RNANFAL2 IS-H: Set Fully Billed Cases to "Final Billed"
    RNASED00 IS-H: Delete Case Selections
    RNASEK00 IS-H: Copy Case Selection
    RNASELM0 IS-H: Billing - Process Messages
    RNASEL00 IS-H: Case Selection
    RNASEL01 IS-H: Case Selection via Outpatient Visits
    RNASTO01 IS-H: Cancel Billing Documents for Case [Live Mode]
    RNASTO02 IS-H: Cancel Billing Documents for Case: Mass Partial Cancellation [Live Mode]
    RNASTO03 IS-H: Cancel Invoice Items per Case (Partial Cancellation) [Live Mode]
    RNASTO04 IS-H: Cancel Provisional Invoice
    RNAPRV04 IS-H: Cost Reimbursement u2013 Direct Patient Billing
    RNAENT00 IS-H: Billing Status of Inpatient Cases
    RNA_CASCADE_BILLING IS-H: Cascade Bill Processing

  • How to find the date of Division creation in org structure

    Dear Gurus
    I want to know how to find the sales division creation date in organisation structure
    Regards
    Anand

    Hi,
    I checked it in my system and it is working.
    Please go to SPROEnterprise strDefinition-Log General-Define.......Division-
    Here go to the screen where the division can be created.
    In this screen, go to the menu Utilities---Change logs. Now select a date range and then execute. You will get all the creations/changes done.
    Ensure that you do this in your golden client where your configurations are done and not in any other systems. If this area is not enabled for logging, then again you cant see this history.

  • How to find the deleted data in tables

    guys,
    how to find the deleted data in tables example: i want to see whether anyone deleted data in MB5B report tables like mbew, etc.,
    regards,

    Hi,
    MBEWH is actually the history table of MBEW. It will record all the changes. As I have told you earlier if you have deleted the record dirctly from the table then it will not come even in the table MBEWH
    That means no changes have been made.
    regards

Maybe you are looking for

  • Error  while create payment in UI   F-53

    Hi Gurus, while creating payment in UI F-53   i got an Error. vendor:3730,plant:3000,company code:3000 invoice document number:5105608648. what is problem for this... ERROR: The difference is too large for clearing Message no. F5263 Diagnosis A non-a

  • New Feature I want to see in iOS 7

    A new feature I want to see in iOS 7 is the Forgot Passcode? feature. For example: If you forgot your normal passcode you use to sign in to your device, you can tap that button* and you will be prompted to sign in with your Apple ID. Once you do that

  • Drawing box in main window of sapscript form

    Hi all, I am developing a script for vendor balance confirmation report, in which I have to provide check boxes to allow the user to select an option. My problem is if I use the BOX statement to draw the box the alignment keeps changing when the size

  • Managing licenses

    We have a team that isn't set in stone - I need to know: if I purchase a CC for teams account with 4 licenses on a monthly subscription and then we no longer have a 4th person can we remove the 4th license and only pay for 3. Any help is appreciated!

  • WN 2000, Oracle 8.0 Forms 6i

    Can all these products be installed together? Any time I tried to install Forms 6i in a Wn 2000 OS running an Oracle 8.0 the Oracle Installer failed. What's wrong. Do i need to update to 8i?