How to find the correct SR of MAM3.0 and SP Level of MI Client
Hi All,
My Backend is ECC 6.0 - 604 SP03
My WAS is 7.01 SP04
I want to Implement a MAM 3.0 Solution. For MAM, I have various SR Releases, SR6 being the latest I think.
For MI Client also, there are lot of SPs available.
My Question is that for the given version of Backend and WAS, How can I know which SR of MAM3.0 we need to pick?
And which MI Client SP is the minimum to be used and what does it depend on?
Thanks & Regards,
Ankur Malhotra
1) So the Backend's version doesnt effect anything, right?
Mostly NO.
2) I followed the path you gave till -
-> Entry by Application Group -> SAP NetWeaver -> SAP NETWEAVER
-> SAP EHP1 FOR SAP NETWEAVER 7.0 -> Entry by Component -> MI Client
But then I didn't see a MI Client 7.01.
I only saw a MI Client 7.00. Where shall I look?
May be your SMP id did not have the rights.
3) I can still see a SR6 - MAMLAPTOP3006_0-20001490.ZIP.
i was not knowing that. Thanks for the update.
4)So even if I go ahead and dowload SR4, Is there a Minimum SP of the MI Client which I need to use for SR4. Where to find this relation?
There is no relation between xMAM SR release and client. The MI server and Client versions have to match as I mentioned earlier.
For xMAM you always have SR (Service Releases) and the patches say PL5 and so on.
But for major products like SAP NetWeaver MI, BI you have SP level say SP15 and so on.
The terminolgoes in SAP world are more often confusing, I agree
Chintan
Similar Messages
-
How I find the correct iTunes account?
I just reloaded my pc laptop and when I tried to sync my iPad a message said I was on a different account and if I continued to sync my iPad was going to be erased. How can I find the correct iTunes account?
By "reloaded my pc laptop" I take it you mean you wiped the PC and restored it back to factory settings? If so did you backup all your documents and data first? Normally your user profile contains a Music folder which in turn holds the iTunes folder. All the important details of your library are in there, with the media below in a folder called iTunes Media. If you lose this information and then connect your device to an empty iTunes library it will want to clean it out and start over.
You should be able to recover the media with the tips in this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into an authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That might switch the assocation of the device to the new machine but I couldn't say for sure.
tt2 -
How to find the mapping between External Object Name and Business Obj.
Hello Gurus
Anyone who can help me? I would like to know is there any way to know Business Object is behind object associated to Context Node, it seems that for some cases is easy but for instance for object BuilHeader is not the case, at least for me. View BP_ADDR/StandardAddress, which belongs to UI Component BP_ADDR, has context node HEADER which is associated to BuilHeader. In case to enhance that object (to add new attributes), using EEWB, I need to know what is the business object behind that external name. Somehow I cannot find the mapping between external name BuilHeader and Business Object.
Kind regards
AleksandarHi Aleks,
If you want to enhance Business Partner, the object you are looking at should be "BUPA" in EEWB. To my knowledge, there is no place where this kind of mapping is maintained.
Note 484597 describes where to find the Cookbook which describes the enhanceable objects and the enhancement process.
In case your requirement is to add table attributes, you can also take a look at the wiki link:
http://wiki.sdn.sap.com/wiki/display/CRM/EEWB-AddingTableattribute
Regards,
Nisha -
After deployment got "404 Not Found". How to find the correct URL?
To the experienced:
In preparing to deploy my application, I am using JDeveloper 10.1.3.4 to deploy the application to the standalone oc4j server that is included in JDeveloper. After the deployment, I get the "404 Not Found" error when trying to invoke the application in a browser. The deployment looks OK, becasue the log window in JDeveloper showed no error when running deployment from inside JDeveloper. Therefore I guess the question is how to find out the correct URL to invoke the application. The steps I took in doing the deployment are as follows.
I first installed the standalone oc4j by running the <jdev_home>\jdev\bin\start_oc4j .bat file. The installation is OK because I deployed the SRTutorial applcation and invoked it in a browser successfully.
The WAR file was created by right-clicking the ViewController project and select to create a WAR file. To the application's Context Root its own name, I typed "ZB" in the box for the context root.
Then in ViewController -> Resources, right_click the deployment file (ZBOV.deploy) and chose "Deploy to" the local_standalone_oc4j. The messages in JDeveloper's log window for the deployment are all clean without errors.
I then used this url to invoke the deployed application in a browser:
http://localhost:8888/ZB/faces/staff/login.jspx
But I got an "404 Not Found" error. Right away I tried invoking the SRTutorial application, and it runs fine.
login.jspx is one of the pages for the appllication. In the application navigator, it is located with other files in the ViewController/Web Content/staff folder, therefore I used /staff/login.jspx after ZB/faces.
What could be wrong? If the deployment is actually successful, how to find out the correct url to invoke the application?
Many thanks for your help!
NewmanHi, Arun,
Thank you for the suggestion. I tried it but got the same error.
I tried it by first undeploying the application using the enterprise manager page (which is also part of the oc4j included in JDeveloper). I select the application and clicked the undeploy link, confirmed that I wanted to remove it. And it was removed.
Then in JDeveloper, I right-clicked the ViewController, and in the properties of the probject selected "J2EE Application" and then selected "Use Custom Settings", then in the "J2EE Web Context Root" box I entered "ZB". Created the deployment profile again, overwriting the existing one, and then right-clicked the ZB.deploy node to deploy to the standalone oc4j on the localhost. And I used the url:
http://localhost:8888/ZB/faces/staff/login.jspx
And I got the same "404 Not Found" error.
There was no error at the time of deployment using the ZB.deploy profile. On the enterprise manager page, the path of the deployed application is given as /C:/jdev10134/j2ee/home/applications/ZB.ear, and the folder of the deployed application is there. Question is: if the deployment is actually OK, can the correct URL be found in some file somewhere in the folder?
All ideas and suggestions are very much appreciated!
Newman -
How to find the correct Parameter Id
hi
below is my code...
i have the report in ALV grid display...
wn i double click on the materail number i want to get the "Basic data 1" screen but my problm is wn i click on the material it is displaying the view selections tab i dont want it to be displayed...
i hav written below code..
wt is wrong in my code?
and tell me exactly how can i find the Parameter ID for a perticular screen....
FORM F01_ALV_EVENT_USER_COMMAND
USING COMMAND LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
ENDIF.
CLEAR wa_final-aufnr.
WHEN 'PLNBEZ'.
READ TABLE IT_FINAL INTO WA_FINAL INDEX SELFIELD-TABINDEX.
IF SY-SUBRC EQ 0.
SET PARAMETER ID 'MAT' FIELD WA_FINAL-PLNBEZ.
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
ENDIF.
Regards
SmithaHi Smitha,
I worked on the similar example that you have stated.....
You try using this way...
You are assinging the parameter id write....i think the field that you are clicking check the value and then compare that value and proceed this way....it will work....
get cursor field fs_lips-vbeln value w_data.
if fs_lips-vbeln ne 'FS_LIPS-VB'.
message 'Click on Delivery Number Only'(004) type 'E'.
endif.
set parameter id 'VL' field w_data.
call transaction 'VL02N' and skip first screen.
commit work.
wait up to 10 seconds.
Regards. -
[http://picasaweb.google.com/anuuj123/TechnicalScreenhots]
Hi Can anyone help me to find the exact CO for my concerned page. In the above link i have uploaded some screenshots of the page.
Link 1 - [http://picasaweb.google.com/anuuj123/TechnicalScreenhots#5345307209851247634]
This is page in which there is a button called "Derive Batch Info". i want to find the code snippet it is calling or tyhe correct CO where the processFormRequest is coded for the same.
Link 2 - [http://picasaweb.google.com/anuuj123/TechnicalScreenhots#5345307209817855218]
Link 3 - [http://picasaweb.google.com/anuuj123/TechnicalScreenhots#5345307211289399426]
are the screenshots of the about the page giving the details of all the items and regions on the page. I have highlighted the Button region. And I have also checked the EgoFunctionRendererCO but could not find the code to handle this button click.
Could anyone Please help me find out the correct CO to handle the button click.Why dont you start by checking out the Controller just above the region which has the buttons. Ideally if a controller handles a button event then the controller must be associated to a region which directly or indirectly has the button as its child. So you must start bottom up if you are searching for the code.
Also check whether the button is a submit button or a plain button. For this purpose you should download the page defintion from mds (eg jdr_utils.printdocument('<page path>')). In case its a button there might be a destination url property which might be forwarding the navigation to some other page. So please check on these fronts and revert.
Regards
Sumit -
How to find a correct User-Exit
Hi All
I need to make changes in the user exit and there are many user-exits in the standard program here my question is how to find the correct user-exit which suits our requirement.
Thanks
srinirun this program by giving ur t code...and click the exit it will go to SMOD there u read the documentation of that exit..if ur requirement satisfies try to use that one..
REPORT ZUSEREXIT.
*report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : devclass like tadir-devclass.
parameters : tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname = tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
How to find the specific build of Oracle9i Jdeveloper??
Hi All
I am quite new to OAF, Please help How to find the specific build of Oracle9i Jdeveloper that corresponds to the specific OA Framework release installed in the runtime environment. I would like to know two things here.. how to find 1)what is the patchset installed in environment 2) which Jdeveloper ARU corresponds to that.
Thanks in Advance !
SavithaPl see MOS Doc 416708.1 (How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12.x)
HTH
Srini -
Hi All,
How to find the tables in Oracle order mangement and what are the links of the tables in oracle OM
Thanks & Regards
srikkanth.MHow to find the tables in Oracle order mangement and what are the links of the tables in oracle OMeTRM
http://etrm.oracle.com
Thanks,
Hussein -
How to find the difference between Project costs & Cost center costs?
Hi all,
Can you please explain me ? What is project Cost & Cost center cost and which are the tables having those fields of project cost & cost center Costs? And how to find the difference between their costs ? And please give me the functional Idea about it?
Thanking you all in Advance...
Regards,
ChandruHi,
goto table COSP:
1) object-no. beginning with 'KS' refer to cost-centre
example: 'KSKOKA4711'
with KS, KOKA = controlling area and 4711 = cost centre
2) OBJNR beginning with 'PR' refer to projects / WBS-element
example PR00001234
Message was edited by: Andreas Mann -
Hi,
I searched in google i could not get proper anser.
my question is
how to find the varient is created are not. and also i am intrested to learn how to creat the variant...
Thanks and regards,
Kesava.hi ,
i am intrested to learn how to creat the variant...
For creating varient just run ur program,
And enter the values into the inpur parameters or select-options.
then press the save button,
after it will display another screen which will ask about the varient name and its discription, fill it and save it,
your varient will created.
Same way u can create another varient also
how to find the varient is created are not
please refer below blogs:
[Blog1|Create variants through ABAP;
[Blog2|How to set up standard variant in ABAP report;
thanks, -
How to find the relevant extractor
Hi guys,
can anyone suggest how to find the relevant extractors for table ZZ0IHEDA and all its fields.
Thanks.
--MonicaHi!
it looks like a custom created table. There will not be any extractor in business content available for extracting from custom table. you have to create generic datasource for this. You can use transaction RSO2. there is a how to called "how to generic delta" which explains the procedure for creating your own extractor on a table.
with regards
ashwin -
Could any one tell me how to find the tables for this Datasource 0GLACCEXT_T011_HIER and theExtract structure is ROHIEROS.But I did'nt see any fields on it.
In the Extract structure there is only one fields is OLTPSOURCE.
Could any one explain me how this hierarchy data get populated into BW. Its very urgent
Thanks in advance
Tajhttp://help.sap.com/saphelp_bw33/helpdata/en/64/032de5ff014c4c86bc15272216a5e2/frameset.htm
table RFDT.. check the link
and also http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/6837bb0e954b7ab47aca5d9fce1101/frameset.htm
null -
I have OS X Yosemite - my current version of iPhoto is not compatible with it / how do i find the correct version of iPhoto? The APP Store keeps sending me back to the same 'current version' that is NOT Compatible...
If you have Yosemite you need iphoto 9.6 from the App store - what is the exact error message you are getting?
Try dragging the iphoto Application to the trash from your applications folder (wait tot empty the trash) and then install iPhoto 9.6 from the App store
LN -
Does any body can tell me hoy can i find the correct driver, i tried everything, unistall de actual drver, and let windows tu search for the driver and nothing, it seems keep telling me it doesnt find the driver, itunes doesnt recognize mi appletv, what can i do?
Hi:
Install the above driver and that will install both the ethernet driver and co-processor driver.
You have a problem with the wireless card...could be minor, could be major.
The wireless card is missing from the device manager.
Install this software, reboot, and see if you can turn on the wireless card by using this software.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=3357379&swItemId=ob_76368_1&swEnvOid=4052
If that doesn't get the Network Controller device to show up so that you can post the hardware ID for it, then the motherboard is shot. Power to the slot that the wireless card is connected to has been cut.
Very common problem with the Nvidia chipset motherboards with the amd processors.
Maybe you are looking for
-
Error while registering RMAN from primary to catalog database
Hi all, Here we have a 10g dataguard environment with db1(db_unique_name) as primary and db2(db_unique_name) as physical standby database. Also we configured one schema on a third machine as catalog database using following steps. The steps executed
-
I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas? I am on Windows 8.1 and m
-
Problem connecting to internet
Hi, Just bought a macbook air and am having trouble connecting to wireless internet. It can detect and connect to the network, but when i try and use safari, it says "you are not connected to the internet". Have tried network diagnostics to no avail
-
JAVA arithmetic problem with double ?
If I try to work double precision numbers I get a unintelligible result, but what do I do wrong ? Are there any inaccuracy in the JAVA double precision numbers arithmetic or what's the problem with this very simple example code ? How can I get correc
-
I've recently been given a PowerMac G5 and as soon as I turn it on, the fans spin for a couple seconds and then it shuts off...Any idea at whats going on with it?