How to find the existing hierarchy variable?

Dear SAP gurus,
In this existing query, there is a Cost Element hierarchy variable created. When I run the query (second attempt by refreshing the query selection screen), the Cost Element Node variable field was not available to be changed again. Believe this has to do with the option 'Changeable with query navigation' option in the variable created. I was trying to confirm on this via the variable properties, but I had trouble identifying where it is located, because there are just too many cost element hierarchies available for reporting.
Anyone can help me? Thank you in advance.
Regards,
Adelynn

HI Nagesh,
Thanks for your highlight, I found the variable, however, I didnt see any option "Changeable with query navigation" for this hierarchy variable. Any reason for this?
The issue I am facing was, say, when I run the query for the first time with Cost Element Node 1, and i was trying to change my selection to CE node 2, so I refreshed my variable screen but the field to select CE hierarchy Node was no longer there. Normally this happens to variable that has the option "Changeable with query navigation" unchecked.
But in this case, I did not see this option for the hierarchy variable used, how do we justify the scenario in this case?
Please kindly assist, thanks again.
Regards,
Adelynn

Similar Messages

How to find the existing START ROUTINEs in Transfer Rules in whole system ?

Hi all,
 How to find the existing Start Routines in Transfer Rules in BW System, please ?
 I know that we could find from the Transfer Rules.
 Is there any way to find instead of looking at Transfer Rules for each InfoSource?
Thanks,
Venkat.

Hi Venkat
You can find it in these tables
RSTRAN
RSUPDROUT
RSAROUT
RSAABAP
RSAABAPINV
Thanks
Tripple k

How to find the existing workflows

Hi Gurus,
How to find the existing workflows, and assign a user to a role.
Suitably rewarded for helpful answers.
B S B

Hi,
You can find existing workflow in Transaction PFTC.
Select Task Type as Workflow Template(WS) and either do F4 on Task
or put some description and press enter.
For assigning a user to a role, check transaction PPOCW. (If in an Org. Unit) or through SU01.
Regards,
Ashish

How to find the existing request no for Smart form

Hi Experts,
plz tell me how to find the existing request no for Smart form in ABAP.
thanks in advance.
regards,
radhika.

Radhika,
Choose Goto > Object Directory Entry> Lock Overview On the Initial screen of the "smartforms" transaction, after entering the actual smartform. This would give you the request number for the smartform.
Regards
Narasimhan

How to find the existing Idoc...

Hi all
How to find the existing Idoc...
in tranction we02..?

Please find the function module that is being used to generate the inbound/outbound IDoc.
Then you go to inside the FM and search for 'CUSTOMER-FUNCTION' in the main program.
This is the place that provided by SAP to modify the IDoc segments.
CALL CUSTOMER-FUNCTION '012'
EXPORTING
 DEKKO = EKKO
 DPEKKO = PEKKO
TABLES
 DEKPO = XEKPO
 DPEKPO = XPEKPO
 DEKET = XEKET
 DH_APPL = APPL.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

How to find the definition for variable creation in report painter

Hi expert,
How/where I can find information about the variable created in basis key figure in the report painter?
What is the mean for basis key figure and variable (set variable on/off check ) in the basis key figure?
Please advice.
thank you.
Regards,
Karen

Hi chinks ,
Thank you for the prompt reply.
My question is how to display the plan data for fiscal year 2012 with the version 6 without explicit/hard code to input version 6 when user just only key in the fiscal year 2011?Any method or variable can be done in report painter which do not appear in the input screen?And How ?
I have try include the variable for version in the column but it appear in the selection input screen where i do not want the version to be appear in the selection input screen where everytime need to remember which version.
I also have try to include the version in the column without variable and I need to key in the value version 6 which this is hard coded where I can't analyst for plan data for budget 2011 where it required me every time need to change the value in report painter for version 5 in order to be able to view the plan data for budget 2012.
Please help.
Many thanks.
KH

How to find the existing function module is used in another function module

Hi all,
I created a function module and the same one is called from another function module.
When I tried to find where the first function module is used using Where-used List , I am getting the message "function module not found in selected areas" .
Please guide me what is other method to find whether the function module is used in another one.
Thanks,
Vengal Rao.

hi,
Go to UTILITIES-> Update Navigation index.
or go to fucntion group and Generate the Funtion group once.
it will detect all fucntion modules under that function group.
regards,
Rama

How to find the existing sql server backup plan/schedule is there a script for that?

Friends,
Is there a easy way to find out in SQLServer (for All DB's) what is the current backup plan/schedule ? is there a script for that?
Thanks,
Karthikeyan Jothi

To check the database backup
Select
SERVERPROPERTY('ServerName'),
db.name,
CONVERT(VARCHAR(10), b.backup_start_date, 103) + + convert(VARCHAR(8), b.backup_start_date, 14) backup_start_date,
CONVERT(VARCHAR(10), b.backup_finish_date, 103) + + convert(VARCHAR(8), b.backup_finish_date, 14) backup_finish_date,
case
when (DATEDIFF(hour, b.backup_start_date, getdate())<24)then 'Success'
when (DATEDIFF(hour, b.backup_start_date, getdate())>=24)then 'Failed'
end Status,
DATEDIFF(hh, b.backup_finish_date, GETDATE())BackupAgeInHours,
(b.backup_size/1024/1024/1024 )BackupSize,
case b.[type]
WHEN 'D' THEN 'Full'
WHEN 'I' THEN 'Differential'
WHEN 'L' THEN 'Transaction Log'
END Type,
ISNULL(STR(ABS(DATEDIFF(day, GetDate(),(Backup_finish_date)))), 'NEVER')DaysSinceLastBackup
FROM sys.sysdatabases db
Left OUTER JOIN (SELECT * , ROW_NUMBER() OVER(PARTITION BY database_name ORDER BY backup_finish_date DESC) AS RNUM
FROM msdb.dbo.backupset) b ON b.database_name = db.name AND RNUM = 1
where dbid<>2
OR
SELECT
DISTINCT
a.Name AS DatabaseName ,
CONVERT(SYSNAME, DATABASEPROPERTYEX(a.name, 'Recovery')) RecoveryModel ,
COALESCE(( SELECT CONVERT(VARCHAR(12), MAX(backup_finish_date), 101)
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'd'
AND is_copy_only = '0'
), 'No Full') AS 'Full' ,
COALESCE(( SELECT CONVERT(VARCHAR(12), MAX(backup_finish_date), 101)
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'i'
AND is_copy_only = '0'
), 'No Diff') AS 'Diff' ,
COALESCE(( SELECT CONVERT(VARCHAR(20), MAX(backup_finish_date), 120)
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'l'
), 'No Log') AS 'LastLog' ,
COALESCE(( SELECT CONVERT(VARCHAR(20), backup_finish_date, 120)
FROM ( SELECT ROW_NUMBER() OVER ( ORDER BY backup_finish_date DESC ) AS 'rownum' ,
backup_finish_date
FROM msdb.dbo.backupset
WHERE database_name = a.name
AND type = 'l'
) withrownum
WHERE rownum = 2
), 'No Log') AS 'LastLog2'
FROM sys.databases a
LEFT OUTER JOIN msdb.dbo.backupset b ON b.database_name = a.name
WHERE a.name <> 'tempdb'
AND a.state_desc = 'online'
GROUP BY a.Name ,
a.compatibility_level
ORDER BY a.name
To check the schedule you can try the below script
https://gallery.technet.microsoft.com/SQL-Jobs-Complete-eabe0050
--Prashanth

How to find full tables hierarchy in schema

Hi,
How to find the table hierarchy list from oracle schema by using Reference Key constraint?
In my schema I am having many tables, approximate 4000 and from there I needs to get a single list which should be based in the Foriegn key based (Parent tables should be first then child tables)
Regards
Anee

You can start with this
select A.table_name children,
         B.TAble_name Father
from DBA_CONSTRAINTS A,
        DBA_CONSTRAINTS B
WHERE A.CONSTRAINT_TYPE = 'R'
     And B.Constraint_name = a.r_Constraint_name

How to find the value of a variable in other program

How to find the value of a variable in other program say I am in a FM and this FM is being called in from other program and I want to know some of the variable details of the program from the FM itself. Imagine if this is a txn. and I need to know the details from some of the programs while executing the same transaction
Regards
Vin

Hi Vinayak,
 you will be having your first program values in internal table or some variables,
 when you are calling the second program you wii use like this,
 SUBMIT <Second Program Name> USING SELECTION-SCREEN '1000'
 WITH s_emp(second program select-options) IN t_emp(first program variables)
 WITH p_chk EQ t_chk
 WITH p_r1 EQ t_r1
 WITH p_month EQ t_month
 WITH s_cust1 IN t_cust1
 WITH p_r2 EQ t_r2
 WITH s_cust2 IN t_cust2
 WITH s_week IN t_week
 AND RETURN.
you have pas like this to get your first program details.

How to find the list of existing tables in a schema using DB link?

Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

How to find the Variable

Hi,
I searched in google i could not get proper anser.
my question is
how to find the varient is created are not. and also i am intrested to learn how to creat the variant...
Thanks and regards,
Kesava.

hi ,
i am intrested to learn how to creat the variant...
For creating varient just run ur program,
And enter the values into the inpur parameters or select-options.
then press the save button,
after it will display another screen which will ask about the varient name and its discription, fill it and save it,
your varient will created.
Same way u can create another varient also
how to find the varient is created are not
please refer below blogs:
[Blog1|Create variants through ABAP;
[Blog2|How to set up standard variant in ABAP report;
thanks,

How to find the level of each child table in a relational model?

Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
 O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
 /↑\ Fks
 O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
 ↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
 child.constraint_name fk,
 child.table_name child,
 child.r_constraint_name pk,
 father.table_name father
 from all_constraints father, all_constraints child
 where child.r_owner = father.owner
 and child.r_constraint_name = father.constraint_name
 and father.constraint_type in ('P', 'U')
 and child.constraint_type = 'R'
 and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
 and child.table_name = aux.child
 and father.constraint_name = aux.pk
 and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbility

Justin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, IN RED):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
 identified by philips';
select granted_role bulk collect
 into cRoles
 from user_role_privs
 where username = user;
for i in cRoles.first .. cRoles.count loop
 execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
 constraint root1_id_pk primary key(root1_id)
 enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
 before delete or insert or update on philips.root1
 begin
 null;
 end;
create table philips.root2(root2_id number,
 constraint root2_id_pk primary key(root2_id)
 enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
 before delete or insert or update on philips.root2
 begin
 null;
 end;
create table philips.node1(node1_id number,
 root1_id number,
 node2_id number,
 node4_id number,
 constraint node1_id_pk primary key(node1_id)
 enable,
 constraint n1_r1_id_fk foreign key(root1_id)
 references philips.root1(root1_id) enable,
 constraint n1_n2_id_fk foreign key(node2_id)
 references philips.node2(node2_id) enable,
 constraint n1_n4_id_fk foreign key(node4_id)
 references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
 before delete or insert or update on philips.node1
 begin
 null;
 end;
create table philips.node2(node2_id number,
 root1_id number,
 node3_id number,
 constraint node2_id_pk primary key(node2_id)
 enable,
 constraint n2_r1_id_fk foreign key(root1_id)
 references philips.root1(root1_id) enable,
 constraint n2_n3_id_fk foreign key(node3_id)
 references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
 before delete or insert or update on philips.node2
 begin
 null;
 end;
create table philips.node3(node3_id number,
 root2_id number,
 constraint node3_id_pk primary key(node3_id)
 enable,
 constraint n3_r2_id_fk foreign key(root2_id)
 references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
 before delete or insert or update on philips.node3
 begin
 null;
 end;
create table philips.node4(node4_id number,
 node2_id number,
 constraint node4_id_pk primary key(node4_id)
 enable,
 constraint n4_n2_id_fk foreign key(node2_id)
 references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
 before delete or insert or update on philips.node4
 begin
 null;
 end;
-- out of the relational model
create table philips.node5(node5_id number,
 constraint node5_id_pk primary key(node5_id)
 enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
 before delete or insert or update on philips.node5
 begin
 null;
 end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
 aExportTablesPhilips utl_file.file_type := null; -- file to write DDL of tables
 aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
 aExportIndexesPhilips utl_file.file_type := null; -- file to write DDL of indexes
 aExportGrantsPhilips utl_file.file_type := null; -- file to write DDL of grants
 aExportTriggersPhilips utl_file.file_type := null; -- file to write DDL of triggers
 sDirectory varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
 cTables udt_tables; -- collection to store table names for the relational depth
begin
 -- omits all referential constraints:
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
 -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
 -- append a SQL terminator (; or /) to each DDL statement:
 dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
 -- create/open files for export DDL:
 aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
 aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
 aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
 aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
 aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
 select d.table_name bulk collect
 into cTables -- collection with the names of tables in the schema philips
 from all_tables t, philips.dictionary d
 where owner = 'PHILIPS'
 and t.table_name = d.table_name;
 -- execution
 sp_seeks_ddl(aExportTablesPhilips,
 aExportReferencesPhilips,
 aExportIndexesPhilips,
 aExportGrantsPhilips,
 aExportTriggersPhilips,
 cTables);
 -- closes all files
 utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips in utl_file.file_type,
 aExportReferencesPhilips in utl_file.file_type,
 aExportIndexesPhilips in utl_file.file_type,
 aExportGrantsPhilips in utl_file.file_type,
 aExportTriggersPhilips in utl_file.file_type,
 cTables in out nocopy udt_tables) is
 cDDL clob := null; -- colletion to save DDL
 plIndex pls_integer := null;
 sTableName varchar(30) := null;
begin
 for i in cTables.first .. cTables.count loop
 plIndex := i;
 sTableName := cTables(plIndex);
 * Retrieves the DDL and the dependent DDL into cDDL clob *
 * for the selected table in the collection, and writes to file.*
 begin
 cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportTablesPHILIPS, cDDL);
 exception
 when dbms_metadata.object_not_found then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportReferencesPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportIndexesPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportGrantsPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 begin
 cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
 sp_writes_ddl(aExportTriggersPhilips, cDDL);
 exception
 when dbms_metadata.object_not_found2 then
 null;
 end;
 end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
 cDDL in out nocopy clob) is
 pLengthDDL pls_integer := length(cDDL);
 plQuotient pls_integer := null;
 plRemainder pls_integer := null;
begin
 * Register variables to control the amount of lines needed *
 * for each DDL and the remaining characters to the last row. *
 select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
 into plQuotient, plRemainder
 from dual;
 * Join DDL in the export file. *
 * ps. 32766 characters + 1 character for each line break. *
 -- if the size of the DDL is greater than or equal to limit the line ...
 if plQuotient >= 1 then
 -- loops for substring (lines of 32766 characters + 1 break character):
 for i in 1 .. plQuotient loop
 utl_file.put_line(aExport, substr(cDDL, 1, 32766));
 -- removes the last line, of clob, recorded in the buffer:
 cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
 end loop;
 end if;
 * If any remains or the number of characters is less than the threshold (quotient = 0), *
 * no need to substring. *
 if plRemainder > 0 then
 utl_file.put_line(aExport, cDDL);
 end if;
 -- record DDL buffered in the export file:
 utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?

Reg - how to find the purpose of methods in a class

hi everyone,
           can u plz help me with how to find the purpose of methods in a class???????
a description abt the methods in a class??????
                    thx in advance,
regards,
balaji.s

Hi Balaji
Pls find some stuff.
reward pts if help.
The following statements define the structure of a class:
·        A class contains components
·        Each component is assigned to a visibility section
·        Classes implement methods
The following sections describe the structure of classes in more detail.
Class Components
The components of a class make up its contents. All components are declared in the declaration part of the class. The components define the attributes of the objects in a class. When you define the class, each component is assigned to one of the three visibility sections, which define the external interface of the class. All of the components of a class are visible within the class. All components are in the same namespace. This means that all components of the class must have names that are unique within the class.
There are two kinds of components in a class - those that exist separately for each object in the class, and those that exist only once for the whole class, regardless of the number of instances. Instance-specific components are known as instance components. Components that are not instance-specific are called static components.
In ABAP Objects, classes can define the following components. Since all components that you can declare in classes can also be declared in interfaces, the following descriptions apply equally to interfaces.
Attributes
Attributes are internal data fields within a class that can have any ABAP data type. The state of an object is determined by the contents of its attributes. One kind of attribute is the reference variable. Reference variables allow you to create and address objects. Reference variables can be defined in classes, allowing you to access objects from within a class.
Instance Attributes
The contents of instance attributes define the instance-specific state of an object. You declare them using the DATAstatement.
Static Attributes
The contents of static attributes define the state of the class that is valid for all instances of the class. Static attributes exist once for each class. You declare them using the CLASS-DATA statement. They are accessible for the entire runtime of the class.
All of the objects in a class can access its static attributes. If you change a static attribute in an object, the change is visible in all other objects in the class.
The technical properties of instance attributes belong to the static properties of a class. It is therefore possible to refer in a LIKE addition to the visible attributes of a class through the class component selector or through reference variables, without prior creation of an object.
Methods
Methods are internal procedures in a class that define the behavior of an object. They can access all of the attributes of a class. This allows them to change the data content of an object. They also have a parameter interface, with which users can supply them with values when calling them, and receive values back from them The private attributes of a class can only be changed by methods in the same class.
The definition and parameter interface of a method is similar to that of function modules. You define a method meth in the definition part of a class and implement it in the implementation part using the following processing block:
METHOD meth.
ENDMETHOD.
You can declare local data types and objects in methods in the same way as in other ABAP procedures (subroutines and function modules). You call methods using the CALL METHOD statement.
Instance Methods
You declare instance methods using the METHODSstatement. They can access all of the attributes of a class, and can trigger all of the events of the class.
Static Methods
You declare static methods using the CLASS-METHODSstatement. They can only access static attributes and trigger static events.
Special Methods
As well as normal methods, which you call using CALL METHOD, there are two special methods called constructor and class_constructor that are automatically called when you create an object or when you first access the components of a class.
reward pts if help.
deepanker

How to find the number of links in a website

hi every body
can any one clear my doubt
my doubt is that
in a website how to find the number of links the hole website contains
is there any navigation tool to find that
plz help me yar
i am waiting for the reply

If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
Hope this helps.

How to find the existing hierarchy variable?

Similar Messages

Maybe you are looking for