How to find the print program for a sap script

Hey Experts,
How to find the print program for a sap script (espicially when it is a custom script(Z*))?
Thanks a ton,

Thanx Vijay,
Actually when I searched for the program in both the tables it didnt show up ther.
But when I did check in the texts of script, I found it.
Good job.
Thanks all.
Vijay, a small doubt.
But why didn't it show up in those 2 tables when all the print programs for standard scripts show up usually?
thnx once again.
Message was edited by: dev a

Similar Messages

How to find standard print programs for ADOBE forms

Hi All,
My question is how to find the standard SAP print program for a SAP provided ADOBE form. For example - how to find what is the satndard SAP provided print program for the ADOBE form for payment advice 'F110_AVIS_INT'.
As by default in the transaction F110 (where the payment advice form configuration is done), a SAP Script form is attached and the print program assigned is an SAP Script (as it contains call to function module like open_form, write_form... ) program and not an ADOBE print program.

Hi Renu,
I have gone through the link provided by you but it only shows a list of standard PDF forms.
My question was how to find the standard SAP provided print program (or driver program which contains the data fetch logic and passing of the data to the interface of the ADOBE form) for these SAP provided ADOBE form.
If SAP has provided standard ADOBE form then definitely they would also have provided the standard print program too ?
@Srihari,
The path system --> Status --> program SAPLFPUIFB is the standard program for the SFP transaction and not for the payment advice form F110_AVIS_INT.
It will be same for all the ADOBE forms if we check in System --> Status --> Program.

How to find the outbound program for standard IDoc

Hi Folks,
Can anyone tell me how to find the outbound program/tcode for a standard IDoc? For e.g. IDoc - MATMAS05 can be generated & distributed using tcode BD10. Similarly how do I find the outbound program/tcode for any standard IDoc? Is there any procedure to find the same.
I have tried to search based on the package name, but unfortunately I didn't find the information for IDoc: COND_A04.
Thanks in advance.
Somu

You can do following steps if the idoc is generated based on change pointer concept (for masters)
- Identify the message type associated with idoc type (table EDIMSG).
- Function module for generating the IDOC will be available in table TBDME (pass message type as input).
Refer to the standard Outbound IDOC generation program RBDMIDOC for more details.
If the idoc is generated based on the process code concept (transaction data), get the process code information from table TMSG1 (pass message type as input), get the function module associated process code from table TEDE1 (pass process code as input).
Regards, Vinod
P.S: There is no standard way to find out the associated program / Tcode for generating idoc. The above process will be helpful to find out the underlying function modules to generate the idoc. For generating idocs based on change pointers the generic program RBDMIDOC can be used.
Edited by: Vinod Kumar on Jul 13, 2011 2:15 PM

To find the Calling Program of an sap script

Hi All,
Can any body please let me know how to find the calling program ( main program ) of an SAP Script Form.
Thanks and Regards,
Rupesh

Hi,
if it's possible to create the form online (no background job), this works:
From SE71 (Form painter), use menu Utilities-->activate debugger.
Then start the program creating the SAPscript form.
As soon as form processing starts, you are inside the SAPscript debugger. At this point, enter /h in command line to activate ABAP debugger. Continue to get into abap debugging. In ABAP debugger, use button 'calls' to see the call stack. The program at the bottom is the starting point, this or one of the more upwards program triggers the form.
Hope this helps.
regards,
C.

How to control the printer selection popup in SAP SCRIPT .

Hi all,
I have written a print program which is calling 5 different layouts forms and printing all the shipping related documents such as packing list, delivery note, shipping label etc . The print program is
attached to a single output type ZEDM.
The issue is that for printing every document a pop-up comes for the printer selection and i want
only one pop-up and all the document should be printed.
Can anyone tell how to control the pop-ups.
Thanks and Regards,
Syed

Hi,
Open the form with dialog once. and then other forms pass ' ' to dialog parameter in OPEN_FORM .
Open the form for printing
Capture the return code
Capture messages
Other froms
Open the form for printing
Capture the return code
Capture messages
Whenever you have a new form use START_FORM
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device                      = 'PRINTER'
      dialog                      = 'X'
      form                        = p_fname
      language                    = sy-langu
      OPTIONS                     = p_itcpo
    EXCEPTIONS
      canceled                    = 1
      device                      = 2
      form                        = 3
      OPTIONS                     = 4
      unclosed                    = 5
      mail_options                = 6
      archive_error               = 7
      invalid_fax_number          = 8
      more_params_needed_in_batch = 9
      spool_error                 = 10
      codepage                    = 11
      OTHERS                      = 12.
IF sy-subrc <> 0.
    w_retcode = 1.
    PERFORM protocol_update.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device                      = 'PRINTER'
      dialog                      = ' '
      form                        = p_fname
      language                    = sy-langu
      OPTIONS                     = p_itcpo
    EXCEPTIONS
      canceled                    = 1
      device                      = 2
      form                        = 3
      OPTIONS                     = 4
      unclosed                    = 5
      mail_options                = 6
      archive_error               = 7
      invalid_fax_number          = 8
      more_params_needed_in_batch = 9
      spool_error                 = 10
      codepage                    = 11
      OTHERS                      = 12.
IF sy-subrc <> 0.
    w_retcode = 1.
    PERFORM protocol_update.
ENDIF.
CALL FUNCTION 'START_FORM'
    EXPORTING
      form      = w_fname
      language = sy-langu
      startpage = 'PAGE'
      program   = sy-repid.
Regards
Krishna

More than one print program for one sap script

Hi Experts,
I have more than one print program which is attached to one sap script. There is standard text used in the script which has variable as date, i want that date to be converted into the previous date but only for one specific print program. For rest of the print program it should behave as it is.
I have tried it using ( s_date - 1 ) formula and it is working fine. But the variable s_date is used in other parts of the program which is affecting rest of the functionality when i am using above said formula. I can't use other variable in standard text as it is used by other programs.
Please guide me to resolve this, thanks in advance.

Well, I'm not sure if I understand the scenario 100%, but I think what you have is a standard text (that you cannot change) referring to variable &S_DATE&. You want this to display the previous day's date when the form is used by one print program but not when it's called by another.
Also, you don't want to change S_DATE to S_DATE - 1 for the whole printout, because apart from the text display, S_DATE is used elsewhere and you want to keep the date as S_DATE, not the previous day.
I assume that you can change the coding of the form.
If all of the above is correct, then you could change the value for S_DATE in the form to the previous day just before it calls the standard text and change it back after the output of the text is done. So right befor the INCLUDE for the standard text, you could use an IF statement in the form logic, query the value of SY-REPID (or SY-CPROG). You'll have to test which one shows the print program name. Depending on that, you can do S_DATE = S_DATE - 1 and after the INCLUDE, do the same thing and change it back to S_DATE = S_DATE + 1.
But honestly, this is a pretty shady programming technique... I mean, hard coding references to the print program name in the form logic is certainly not a very clean method

How to find the corresponding programs for a particular condition type

Hi experts,
I have one condition type( KSCHL ).
I need to find the programs where this condition type is used.
Thanks in Advance.

Dear Nagireddy,
You have to go further by using where-use list option(Arrow Direction Icon) from SE11 or from SE38 editor. Then the system will show you the places where the condition type KSCHL is being used.
Thanks & Regards,
Dinesh

How can i find the printing program?

hi
i have sap script how can i find the printing program ?
ami

ami bardogo wrote:
hi
what is the different between the commands 'break' and 'break-point'
thanks,
ami
h2 Breakpoints h2
Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
Directly set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statements
The Debugger stops the program immediately before the specified statement is executed.
Breakpoints
at subroutines
The Debugger stops the program immediately before the specified subroutine is called.
Breakpoints at function modules
The Debugger stops the program immediately before the specified function module is called.
Breakpoints at methods
The Debugger stops the program immediately before the specified method is called.
Breakpoints at exceptions and system exceptions
The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
·        You do not have to change the program code.
·        You can set them even when the program is locked by another programmer.
·        You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
For further information on special breakpoints, refer to:
Breakpoints at Statements
Breakpoints at Subroutines
Breakpoints at Function Module Calls
Breakpoints at Methods
Breakpoints at System Exceptions
h2 page break h2
WINDOW TYPES
When defining a layout set window, you must select a window type for the window. You can choose between three types:
Constant windows (CONST)
Variable windows (VAR)
Main windows (MAIN)
CONSTANT WINDOW
A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
VARIABLE WINDOW
The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
MAIN WINDOW
Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
It controls the page break.
It contains the text body that may cover several pages.
It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
HOW THE COMPOSER WORKS
The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
Page control in layout sets
Define subsequent page statically
Define subsequent page dynamically
Format a layout set page
PAGE CONTROL IN LAYOUT SETS
SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
DEFINE SUBSEQUENT PAGE STATICALLY
You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
DEFINE SUBSEQUENT PAGE DYNAMICALLY
The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
NEW-PAGE .
NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
FORMAT LAYOUT SET PAGE
The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
LAYOUT SET CONTROL
To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
Several print requests
Start a layout set again
Switch layout sets
Find layout sets
SEVERAL PRINT REQUESTS
Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'CLOSE_FORM'
You cannot combine ABAP/4 list output and SAPscript output in one print request.
START A LAYOUT SET AGAIN
Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
CALL FUNCTION 'OPEN_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION 'START_FORM'
CALL FUNCTION 'END_FORM'
CALL FUNCTION CLOSE_FORM
If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

How do I print a configuration page to find the printer code for my laserjet printer to eprint?

How do I print the configuration page to find the printer code for my laserjet p1102W?

Guide here:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Add-your-printer-to-your-ePC-account-Print-Web...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How to find the user exit for a screen..

Hi,
plz help me how to find the user exit for a screen..?
Regards
Anbu

Hi,
check this program this will give you the list of user-exit and BADI for the perticular Tcode.
REPORT zuserexit_badi.
TABLES : tstc,
tadir,
modsapt,
modact,
trdir,
tfdir,
enlfdir,
sxs_attrt ,
tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode,
p_pgmna LIKE tstc-pgmna .
DATA wa_tadir TYPE tadir.
START-OF-SELECTION.
IF NOT p_tcode IS INITIAL.
    SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
ELSEIF NOT p_pgmna IS INITIAL.
    tstc-pgmna = p_pgmna.
ENDIF.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
    WHERE pgmid = 'R3TR'
    AND object = 'PROG'
    AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
      WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
        WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
        WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
        WHERE pgmid = 'R3TR'
        AND object = 'FUGR'
        AND obj_name EQ enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir INTO TABLE jtab
    WHERE pgmid = 'R3TR'
    AND object IN ('SMOD', 'SXSD')
    AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
    WHERE sprsl EQ sy-langu
    AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(105) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
      SORT jtab BY object.
      DATA : wf_txt(60) TYPE c,
      wf_smod TYPE i ,
      wf_badi TYPE i ,
      wf_object2(30) TYPE c.
      CLEAR : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
      LOOP AT jtab INTO wa_tadir.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 'Enhancement/ Business Add-in',
          41 sy-vline ,
          42 'Description',
          105 sy-vline.
          WRITE:/(105) sy-uline.
        ENDAT.
        CLEAR wf_txt.
        AT NEW object.
          IF wa_tadir-object = 'SMOD'.
            wf_object2 = 'Enhancement' .
          ELSEIF wa_tadir-object = 'SXSD'.
            wf_object2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 sy-vline,
          2 wf_object2,
          105 sy-vline.
        ENDAT.
        CASE wa_tadir-object.
          WHEN 'SMOD'.
            wf_smod = wf_smod + 1.
            SELECT SINGLE modtext INTO wf_txt
            FROM modsapt
            WHERE sprsl = sy-langu
            AND name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
For BADis
            wf_badi = wf_badi + 1 .
            SELECT SINGLE text INTO wf_txt
            FROM sxs_attrt
            WHERE sprsl = sy-langu
            AND exit_name = wa_tadir-obj_name.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 sy-vline,
        2 wa_tadir-obj_name HOTSPOT ON,
        41 sy-vline ,
        42 wf_txt,
        105 sy-vline.
        AT END OF object.
          WRITE : /(105) sy-uline.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) sy-uline.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , wf_smod.
      WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : wf_object TYPE tadir-object.
CLEAR wf_object.
GET CURSOR FIELD field1.
CHECK field1(8) EQ 'WA_TADIR'.
READ TABLE jtab WITH KEY obj_name = sy-lisel+1(20).
MOVE jtab-object TO wf_object.
CASE wf_object.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD sy-lisel+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Reagards,
Bharat.

Where can we find the standard program for scripts and smartform for vl02

where can we find the standard program for scripts and smartform for vl02
regard,
anil

If it is a standard Script Output see that all config in NACE tcode was done correctly and in the Application document the output type was properly defined and attached to a medium, partner and all communication related things like printer name, when to print the output and number of messages etc are entered in the document
the go to the related application Tcode
(for sales order goto VA02 or VA03)
(delivery -VL02N or VL03N)
for Invoice VF02 or VF03
for PO -goto ME9F
enter doc number, Issue Output to -> screen/printer
then see the output
step 1 : copy the z layout into testing client thru SCC1.
step2 : go to se71 and check modified layout.
step3 : if it is under logistics.. go to TCODE "NACE".
u will see various applictions for each business process.
there u have configure ur related layout according to requirments,
for example u consider for Request fo Quatation..
there is APPLICATION called "EA"
click and enter into it. configure it with ur requirments, for help consult with ur functonal consaltant, and save it.
step 4 : goto tcode ME9A for requst for quatation(RFQ).
step 5 : enter test data avalable and check it with message display.
it is same for other applications like Contract agreament --> ME9k
invoice --> vl02n
and goes on..
Reward points for useful Answers

How to find the WhereUsed List for a Business Object Event?

How to find the WhereUsed List for a Business Object Event?

Can anybody let me know how to get which
Whereused function will get the data from
different Werks in multi-level?
Any sample program please!!!

How to use the print option for photos?

How to use the print option for photos. I have a wireless printer but how do I set it up?

http://www.apple.com/support/iphone/assistant/airprint/

How to find the text id for the text in the sales order

Hi all,
How to find the text id for the item-text in the sales order?
There are different Text available in the sales order under item like Warehouse instruction, CSR instruction...
I want to know the corresponding Text id for the text ELECTRONIC ORDER COMMENT.
Table TTXID contains the validation of the Text id.
Please help me in knowing the way to identify the text-id from the text list..
Thanks foryour help
Suresh Kumar

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

How to find the workflow admins for all costcenters ?

Dear SRM gurus
We are using Classic scenario with N th step workflow with BADI.
we have a requirement.
How to find the workflow admins for the particular costcenters.
we used HRV1222A where ATTRIB EQ <Z attribute>(This is our own attribute to group all the costcenters)
used table HRP1001 to find the Admins but results are not correct because it is not showing my user id(I have all authorisations).
Is there anyway to find all the admins for a cost center(users are more than 7000+)
can anybody send work flow related presentations or cookbook
Thanks in Advance.
srinu

hi
I have not received any thing.Please send again
[email protected]
[email protected]

How to find the print program for a sap script

Similar Messages

Maybe you are looking for