How to find the target system landscape

How to find the target system landscape - the clients present in the target system. Please explain in detail.
regards,
ravikiran

this FM is giving only the current system id. I want to find the target system details.

Similar Messages

  • How to find the Source system table

    Hi Experts,
    How to find table name in SCM APO system, because I am getting error in process chain, the corresponding  table in the source system does contain any data. check the data basis in the source system.
    Please provide the solutions how to find the table in APO (DP scm bi).
    Thanks in advance.
    Bye,
    Bharathi.

    Hi
    I guess you knew that in APO, apart from APO tables.. it is Livecache where the actual transaction data is stored. 
    But, if you just want to find some of the existing table in APO.. simply go to se11 and in the table name put the pattern as /SAPAPO/* and press F4. It will give a list of tables with the descriptions. 
    You can find out yourself all APO tables application wise with the following steps:
    Use transaction SE11 or SE16
    - Press F4 in the selection field 
    - You will get popup... in the below line of the popup selection SAP Applications.
    Here you will get the Application list.  In that select your own application for which you want to get the table details
    e.g. SCM- Supply Chain Management --> SCM-APO --> Advanced Planning and Optimization --->SCM-APO-MD - Master Data --> /SAPAPO/00_PRODUCT 
    Here are some examples:
    /SAPAPO/v_matloc - material, material number location view
    /SAPAPO/TSAREAKO - Planning Area details
    /SAPAPO/TSAREATE - Planning Area technial fields
    Since there are thousands of tables, I cannot list them all here. 
    or
    You can use transaction ST05 (database trace) to help you find the tables you are looking for. You can turn on the trace function, run an APO transaction, and looks at the ST05 logs for the tables

  • How to find the target host

    Hi All,
    I need to configure ADS for that I am following steps given in 'ADS configuration guide', according to 5.3.2 step 6 I need to enter the target host ( j2ee engine that runs adobe document services) and  service no. I am not able to find it.
    Can someone tell me how can we find the target host and service no.

    Hi All,
    I need to configure ADS for that I am following steps given in 'ADS configuration guide', according to 5.3.2 step 6 I need to enter the target host ( j2ee engine that runs adobe document services) and  service no. I am not able to find it.
    Can someone tell me how can we find the target host and service no.

  • How to find the local system name in remote desktop through oracle

    Hi all,
    i am useing oralce 9i,D2K (Forms 6i) ,Presently i had a small problem when ever i am useing the application through the remote desktop i can not able to find the local system name .If i am accessing from the local system name then i can get the system name but when the user accessing the application through remote desktop i want to find from which local system he is accessing the remote desktop through the application is there any way to find it .If please let me know .
    Thanks in advance
    Srini

    Hi,
    Not sure of what you want.
    Have a look at v$session view. Machine column is maybe what you're looking for.
    If you want to retrieve the local host executing remote desktop, it's actually not possible natievely, since it's still remote host that is connecting to the database.
    Hope it helps.

  • How to determine the target system during runtime of a Generic DS?

    Hi Experts, good afternoon.
    I am coding a Generic Extractor using Function Module. I have to select the field TIMESTAMP on table ROOSPRMSC. To do so, I need the value of RLOGSYS that is the BW system that is calling the Extractor.
    Do anybody knows how to determine via ABAP the RLOGSYS (Remote Logical System) during the runtime of the Generic DataSource Function Module?
    The table ROOSPRMSC keep the TIMESTAMPs values of the last delta upload for each DataSource and for each BW target system. As I have 2 BW's loading data from the same SAP ECC system, I need to know, during runtime of my Generic DataSource, the actual system that is requesting the delta. That's the reason why I need to know the BW's logical system name that is "runnig" the delta InfoPackage.
    Plese, help!!!
    Thanks in advance!
    Leandro Vani

    Leandro,
    The calling program of your FM should have a local variable I_RLOGSYS which is populated with the BW server ID.
    If you don't know how to access a variable in a program that is in call stack using field symbols, search SDN.
    I haven't tested this, so you may have to explore a little.
    Good luck.

  • How to find the backend system in portals

    Hi Gurus,
    How to determine the number of backend systems referred in portals.
    Higher points will be rewarded for useful inputs.
    Thanks in Advance,
    Dharani

    Hi Dharani,
    if u have the system Administration role,
    u navigate thro System administration -> System configuration -> System landscape Overview.
    this iview will list all the system created for connection.
    If u want further clarification , feel free to raise q in forum

  • How to find the BW system / version details - Urgent Please

    Hi,
    Our BW system version is 3.0b.  I would like to know other details like portal version,IGS and other associated details. Can anyone help me to find the details please.
    Thanks,
    David.

    ON your menu: Go to System >status > under the sap system box there is a icon like a glass. click on it. you will see all the details.
    HOpe this helps.
    BK

  • How to find the backend systems from the CRM?

    Hi!
    I just get a CRM system. I wonder whether there is any backend
    system connected to it.
    Could you tell how to do that? SM59?
    Thanks!

    Hi Jennifer,
    Go to:
    Customizing /SPRO/
    SAP Implementation Guide\Integration with Other mySAP Components\Strategic Enterprise Management\Define Target System (SAP R/3, SAP BW)
    Allot points, if helps.
    Martin Kuma

  • How to find The Operating System is idle

    hi,
    form last one month I am looking for a method or technique that provides me the system is idle or not,basically it will help me to dynamic log out from the system when the user is idle
    thanks & regards,

    You can only determine if the user is idle for your application.
    You can reset timer each time the user performs an action and have a periodic check that a timeout is not reached.
    You could warn the user that they are about to be timed out if they don't click on something in the app.

  • How to find the source and target systems of an imported Transport Request?

    Hello,
    How to find the source and target systems of an imported Transport Request?
    chinna.

    Hi Chinna,
    In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
    DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
    Regards
    Ashok

  • BASED ON QUEUE NAME HOW CAN WE FIND THE SENDER SYSTEM IN ECC

    Based on queue name how to identify the sender system
    the issue is
    Messages are  are coming from pi to ecc , check below queues. These are incoming queues
    to Ecc from PI. We are trying to find what these queues are. Sometimes these
    are failing and we are not able to process,
    Based on the above information we need to find  the sender system from where it is coming.
    Regards
    MADHU

    Hi srinivas- Thanks for your reply and there is no issue on pi side after reaching to ecc the entries got stucking in smq2 of  ecc system now the target system wants to know on which sender system these messges are coming we are not finding sender system detials from smq2 of ecc system .
    Regards
    Madhus

  • How to use FTP_COMMAND to put a file in the target system

    Hi All,
    I have the requirement to put an excel file from apllication server to another remote system for this i am using the function modules
    1) FTP_CONNECT to connect to the sourece as well as the destination systems  --- Here i am able to hit the both systems.
    2) for sending the data to the target system i am using FTP_COMMAND by passing the 'put' statement along with the soruce and destinations  for the command parameter.
    See the bellow code
    CONCATENATE 'put' v_fname '
    ' 'wbrs1\' folder
    into cmd separated by space.
    CALL FUNCTION 'FTP_COMMAND'
      EXPORTING
       HANDLE                = dhdl
        command              = cmd
       COMPRESS              = 'N'
      VERIFY                =
      RFC_DESTINATION       =
    IMPORTING
      FILESIZE              =
      FILEDATE              =
      FILETIME              =
      tables
        data                  = result
    EXCEPTIONS
       TCPIP_ERROR           = 1
       COMMAND_ERROR         = 2
       DATA_ERROR            = 3
       OTHERS                = 4
    Here v_name is the file path and name in the application server suppose say :
    /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
    and wbrs1 is the target system and 'Waynesboro DFS' is the folder name i ma passing to the command .
    Also I tried with the following statement
    CONCATENATE 'put' v_fname '
    ' dhost  folder
    into cmd separated by space.
    Here v_name is the file path and name in the application server suppose say :
    /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS,
    Dhost is wbrs1.wb.na.webdti.com
    And Waynesboro DFS is the folder .
    Here i am getting the error as invalid argument.
    See the bellow messages from result internal table.
    put /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
    wbrs1\ Waynesboro DFS
    open /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS errno 22: Invalid argument
    Please let me know how i can resolve this problem and how can I put this file in the destination system.
    Thanks in advance.
    Regards,
    Venkat

    check this code....here data is transferred from SAP to Informatica box..
    REPORT zfo_phoenix_acc_reconciliation NO STANDARD PAGE HEADING
                                                    MESSAGE-ID zz
                                                    LINE-SIZE  255
                                                    LINE-COUNT 65.
                            PROGRAM DECLARATION
    PROGRAM ID            : ZFO_PHOENIX_ACC_RECONCILIATION
    DESCRIPTION           : Phoneix Account Reconcilation Program-Feed
                            Balance sheet account balances from GL
                            3 files needed to be enhanced. The files are " Master
                  Attribute File" & "Transaction File(GL Balance)". For
                  Master Attribute File, data needs to be retrieved from
                  T001, ZDATSRC_T, SKA1, T003, T856. The corresponding
                  data from all the tables is downloaded into file
                  according to the condition specified. For Transaction
                  File, data needs to be retrieved from ZGEIST based on
                  Ledger(GG), Record Type(0), Fiscal Year, Period(016).
                  Then the current period is used to determine which TSLxx
                  & KSLxx needs to be used. Also, the conditions are
                  specified in specs which have been used accordingly.
                  The final data fetched will need to processed as files
                  which neednot be downloaded to Presentation/Application
                  server. Instead the files are been FTPed to the
                  Informatica Server using FTP. The location where the
                  files need to be located is ERC\GLOBALSAP.
                         TABLES
    TABLES : ADR6.
                         TYPES
    Output File - Master COA(Chart of Account)
    TYPES : BEGIN OF ty_coacode ,
             coa_code(20),         "COA Code
             coa_description(50),  "COA Description
             field11 TYPE x,       "Line Feed
             END OF ty_coacode.
    Output File - Master Account
    TYPES : BEGIN OF ty_acctcode ,
             act_code(20),         "GL Account Number
             act_desc(60),         "GL Account Description
             act_act_flag(1),      "Account marked for deletion indicator
             glact_type(1),        "GL Account type
             fi_line(20),          "Corporate Financial Statement Line
             coa_code(20),         "COA Code
             act_defcode(3),       "Account Defination Code
             field11 TYPE x,       "Line Feed
           END OF ty_acctcode.
    Output File - Master Entity
    TYPES : BEGIN OF ty_entitycode,
             entity_code(12),     "Entity Code
             com_desc(40),        "Company Name
             coa_code(20),        "COA Code
             field11 TYPE x,      "Line Feed
            END OF ty_entitycode.
    Output File - Master Attribute
    TYPES : BEGIN OF ty_attribcode,
             attrib_code(5),       "Attribute Code
             attrib_value(20),     "Attribute Value
             attrib_desc(60),      "Attribute Description
             field11 TYPE x,       "Line Feed
            END OF ty_attribcode.
    Output File - Transaction GL Balance
    TYPES : BEGIN OF ty_glbal,
             gl_reccode(2),        "GL Reconciliation Code
             gl_entity(12),        "GL Entity - Company Code
             gl_accnum(20),        "Gl Group Account Number
             site(4),              "Site
             currency_type(6),     "Transaction Currency Code
             year(4) TYPE n,       "Year
             month(2) TYPE n,      "Month
             as_of_date(8),        "Date Account Balance
             tran_cur_amt(21),     "Transaction Currency Amount
             usd_amount(21),       "USD Amount
             racct(20),            "GL Account Number
             zzbewar(20),          "Consolidation Transaction Type
             zzdatsrc(20),         "Data Source
             zzblart(20),          "Document Type
             rassc(20),          "Trading Partner
             field1(20),           "Attribute field1
             field2(20),           "Attribute field2
             field3(20),           "Attribute field3
             field4(20),           "Attribute field4
             field5(20),           "Attribute field5
             field11 TYPE x,       "Line Feed
           END OF ty_glbal.
    Output File - Control
    TYPES :BEGIN OF ty_globalsap,
            clnt_name(6),          "Client Name
            source_name(12),       "Source Name
            as_of_date(8),         "AS of Date
            time_stamp(6),         "Time Stamp
            time_zone(8),          "Time Zone
            num_of_files(3),       "Number of Files
            num_of_records(9),     "Number of Records
            user_ids(60),          "User ID(s)
            field11 TYPE x,        "Line Feed
           END OF ty_globalsap.
    Int'table to hold ZGEIST Data
    TYPES : BEGIN OF ty_zgeist_data,
              rldnr    TYPE rldnr,      "Ledger
              rrcty    TYPE rrcty,      "Record Type
              rvers    TYPE rvers,      "Version
              ryear    TYPE gjahr,      "Fiscal Year
              rbukrs   TYPE bukrs,      "Company Code
              racct    TYPE racct,      "Account Number
              robjnr   TYPE gobjnr_r,   "Object Number for objects
              cobjnr   TYPE gobjnr_c,   "Object Number for transaction
              sobjnr   TYPE gobjnr_s,   "Object Number for partner
              rtcur    TYPE rtcur,      "Currency Key
              runit    TYPE meins,      "Base Unit of Measure
              drcrk    TYPE shkzg,      "Debit/Credit Indicator
              rpmax    TYPE rpmax,      "Period
              rzzstagr TYPE stagr,      "Statistical key figure
              zzaltkt  TYPE altkt,      "Account Number in Group
              zzdatsrc TYPE zdatsrc,    "Data Source code
              zzbewar  TYPE rmvct,      "Transaction Type
              zzblart  TYPE blart,      "Document Type
              rassc    TYPE rassc,       "Trading Partner
              zzvbund  TYPE rassc,      "Trading Partner
              tslvt    TYPE tslvt9,     "Transactional Currency
              kslvt    TYPE kslvt9,     "Group Currency
            END   OF ty_zgeist_data.
    Int'table to hold ZGEIST Error Data based on conditions
    TYPES : BEGIN OF ty_zgeist_error_data,
              rldnr    TYPE rldnr,      "Ledger
              rrcty    TYPE rrcty,      "Record Type
              rvers    TYPE rvers,      "Version
              ryear    TYPE gjahr,      "Fiscal Year
              rbukrs   TYPE bukrs,      "Company Code
              robjnr   TYPE gobjnr_r,   "Object Number for objects
              cobjnr   TYPE gobjnr_c,   "Object Number for transaction
              sobjnr   TYPE gobjnr_s,   "Object Number for partner
              rtcur    TYPE rtcur,      "Currency Key
              runit    TYPE meins,      "Base Unit of Measure
              drcrk    TYPE shkzg,      "Debit/Credit indicator
              rpmax    TYPE rpmax,      "Period
            END   OF ty_zgeist_error_data.
                         FIELD SYMBOLS
    FIELD-SYMBOLS : <fs> TYPE ANY.
                         CONSTANTS
    DATA : c_selected    TYPE c VALUE 'X',  "Field for constant value 'X'
           c_y           TYPE c VALUE 'Y',  "For Acc marked for deletion
           c_n           TYPE c VALUE 'N',  "For Acc not marked for deletion
           c_a           TYPE c VALUE 'A',  "For GL Account type Asset
           c_l           TYPE c VALUE 'L',  "For GL Account type Liability
           c_q           TYPE c VALUE 'Q',  "For GL Account type Equity
           c_r           TYPE c VALUE 'R',  "For GL Account type Revenue
           c_e           TYPE c VALUE 'E',  "For GL Account type Expense
           c_t           TYPE c VALUE 'T',  "For GL Account type
           c_userid(60)  TYPE c ,
           c_curtp       TYPE curtp VALUE '10', "Currency type
           c_curtp1      TYPE curtp VALUE '30', "Currency type
           c_rassc(5)    TYPE c VALUE 'RASSC',  "Trading Partner
           c_dtsrce(6)   TYPE c VALUE 'DTSRC',  "Data Source
           c_sacct(5)    TYPE c VALUE 'SACCT',  "GL Account
           c_docty(5)    TYPE c VALUE 'DOCTY',  "Document Type
           c_trxtp(5)    TYPE c VALUE 'TRXTP',  "Transaction Type
           c_tradptn(15) TYPE c VALUE 'Trading Partner',  "Trading Partner
           c_datsrc(11)  TYPE c VALUE 'Data Source',      "Data Source
           c_glacc(10)   TYPE c VALUE 'GL Account',       "GL Account
           c_doctyp(13)  TYPE c VALUE 'Document Type',    "Document Type
           c_trantyp(16) TYPE c VALUE 'Transaction Type'. "Transaction Type
                         DATA (Simple Fields)
    DATA: w_cnt1         TYPE i, "No Of records in output file COA Code
          w_cnt2         TYPE i, "No Of records in output file Account
          w_cnt3         TYPE i, "No Of records in output file Entity
          w_cnt4         TYPE i, "No Of records in output file attribute
          w_cnt5         TYPE i, "No Of records in output file GL Balance
          w_tot_recs     TYPE i, "TOtal number of records downloaded
          w_date         LIKE sy-datum, "System date
          w_timediff     LIKE sy-uzeit, "Time Difference to GMT
          w_timezone(10) TYPE c,       "Time Difference to GMT
          w_file_count(3) TYPE n,       "File Count
          w_period TYPE poper,          "To hold Period Value
          w_year LIKE t009b-bdatj,      "To hold Fiscal Year Value
          w_outfile       TYPE char64,  "FTPed file path
          w_hdl           TYPE i.       "Handle for FTP
                         INTERNAL TABLES
    Intenal table for GL Account details
    DATA: BEGIN OF it_gl_detail OCCURS 0,
              saknr      TYPE saknr,
              txt50_skat TYPE txt50_skat,
              xloev      TYPE xloev,
          END OF it_gl_detail.
    DATA: it_company_list LIKE bapi0014_1  OCCURS 0 WITH HEADER LINE,
          it_coacode TYPE STANDARD TABLE OF ty_coacode  WITH HEADER LINE,
          it_acctcode TYPE STANDARD TABLE OF ty_acctcode WITH HEADER LINE,
          it_entitycode TYPE STANDARD TABLE OF ty_entitycode
                                            WITH HEADER LINE,
          it_attribcode TYPE STANDARD TABLE OF ty_attribcode
                                            WITH HEADER LINE,
          it_glbal TYPE STANDARD TABLE OF ty_glbal WITH HEADER LINE,
          it_globalsap TYPE STANDARD TABLE OF ty_globalsap WITH HEADER LINE,
          it_t001 TYPE STANDARD TABLE OF t001 WITH HEADER LINE,
          it_zdatsrc TYPE STANDARD TABLE OF zdatsrc_t WITH HEADER LINE,
          it_ska1 TYPE STANDARD TABLE OF ska1 WITH HEADER LINE,
          it_t003 TYPE STANDARD TABLE OF t003 WITH HEADER LINE,
          it_t856 TYPE STANDARD TABLE OF t856 WITH HEADER LINE,
          it_zgeist_data    TYPE STANDARD TABLE OF ty_zgeist_data
                                 WITH HEADER LINE,
          it_zgeist_data1   TYPE STANDARD TABLE OF ty_zgeist_data
                                 WITH HEADER LINE,
          it_zgeist_data_all TYPE STANDARD TABLE OF zgeist,
          wa_it_zgeist_data1 TYPE ty_zgeist_data,
          wa_it_zgeist_data TYPE zgeist,
          it_zgeist_error_data TYPE STANDARD TABLE OF ty_zgeist_error_data,
          wa_it_zgeist_error_data TYPE ty_zgeist_error_data.
                         SELECTION-SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-009.
    SELECTION-SCREEN : BEGIN OF LINE,
                COMMENT 1(30) TEXT-006,
                POSITION POS_LOW.
    PARAMETERS :       P_USER(30) TYPE C LOWER CASE OBLIGATORY.
    SELECTION-SCREEN : END OF LINE.
    SELECTION-SCREEN : BEGIN OF LINE,
                COMMENT 1(30) TEXT-007,
                POSITION POS_LOW.
    PARAMETERS :       P_PWD(30) TYPE C LOWER CASE OBLIGATORY.
    SELECTION-SCREEN : END OF LINE.
    SELECTION-SCREEN : BEGIN OF LINE,
                COMMENT 1(30) TEXT-008,
                POSITION POS_LOW.
    PARAMETERS :       P_HOST(64) TYPE C LOWER CASE OBLIGATORY.
    SELECTION-SCREEN : END OF LINE.
    SELECTION-SCREEN : BEGIN OF LINE,
                COMMENT 1(30) TEXT-010,
                POSITION POS_LOW.
    SELECT-OPTIONS :   S_EMAIL FOR ADR6-SMTP_ADDR NO INTERVALS.
    SELECTION-SCREEN : END OF LINE.
    SELECTION-SCREEN END OF BLOCK B1.
    -- Password not visible--
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF screen-name = 'P_PWD'.
          screen-invisible = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    I N I T I A L I Z A T I O N                                         *
    INITIALIZATION.
      w_date0(2) = sy-datum4(2).
      w_date2(2) = sy-datum6(2).
      w_date4(4) = sy-datum0(4).
      S_EMAIL-SIGN = 'I'.
      S_EMAIL-OPTION = 'EQ'.
      S_EMAIL-LOW = '[email protected]'.
      APPEND S_EMAIL.
      S_EMAIL-SIGN = 'I'.
      S_EMAIL-OPTION = 'EQ'.
      S_EMAIL-LOW = '[email protected]'.
      APPEND S_EMAIL.
                         START - OF - SELECTION
    START-OF-SELECTION.
    Geting Company Details
      PERFORM get_company_list.
    Geting GL Account Details
      PERFORM get_gl_acc_detail.
    Geting GL Balance Details
      PERFORM get_zgeist_data.
                         END - OF - SELECTION
      PERFORM process_coacode.
      PERFORM process_acctcode.
      PERFORM process_entitycode.
      PERFORM process_attribcode.
      PERFORM process_glbal.
      PERFORM process_ftp_file.
      IF NOT it_zgeist_error_data[] IS INITIAL.
        PERFORM write_error_report.
      ENDIF.
    *&      Form  GET_COMPANY_LIST
               Form to get Company List                                 *
    FORM get_company_list.
      CALL FUNCTION 'BAPI_COMPANY_GETLIST'
        TABLES
          company_list = it_company_list.
    ENDFORM.                    "GET_COMPANY_LIST
    *&      Form  GET_GL_ACC_DETAIL
          Form to get the GL Account details                            *
    FORM get_gl_acc_detail.
      DATA : l_txt50 LIKE skat-txt50,
             l_tabix LIKE sy-tabix.
      SELECT saknr xloev
        INTO TABLE it_gl_detail
        FROM ska1
        WHERE ktopl = 'G001'
        AND   ( saknr GE '1000000000' AND saknr LE '4500000000' ).
      LOOP AT it_gl_detail.
        l_tabix = sy-tabix.
        SELECT SINGLE txt50
          INTO l_txt50
          FROM skat
          WHERE spras = 'EN'
          AND   ktopl = 'G001'
          AND   saknr = it_gl_detail-saknr.
        it_gl_detail-txt50_skat = l_txt50.
        MODIFY it_gl_detail INDEX l_tabix.
        CLEAR l_txt50.
      ENDLOOP.
    ENDFORM.                    "GET_GL_ACC_DETAIL
    *&      Form  PROCESS_COACODE
    Form to Populate COA data to Output internal table  IT_COACODE *
    FORM process_coacode.
      it_coacode-coa_code          =  text-023.     "GLOBAL.
      it_coacode-coa_description   =  text-022.     "Global SAP for ERC
      it_coacode-field11           =  '11'.
      APPEND it_coacode.
      CLEAR it_coacode.
    ENDFORM.                    "PROCESS_COACODE
    *&      Form  PROCESS_ACCTCODE
    Form to Populate Account data to Output Internal table IT_ACCTCODE *
    FORM process_acctcode.
      DATA:l_saknr(10).
      DATA : it_gl_detail2 LIKE it_gl_detail OCCURS 0 WITH HEADER LINE.
      IF NOT it_gl_detail[] IS INITIAL.
        it_gl_detail2[] = it_gl_detail[].
        SORT it_gl_detail2 BY saknr.
        DELETE ADJACENT DUPLICATES FROM it_gl_detail2 COMPARING saknr.
      ENDIF.
      IF NOT it_gl_detail2[] IS INITIAL.
        LOOP AT it_gl_detail2.
          MOVE it_gl_detail2-saknr      TO it_acctcode-act_code.
          MOVE it_gl_detail2-txt50_skat TO it_acctcode-act_desc.
    Check GL Account is marked for deletion or not
          IF it_gl_detail2-xloev     = c_selected.
            it_acctcode-act_act_flag = c_n.
          ELSE.
            it_acctcode-act_act_flag = c_y.
          ENDIF.
    Determine GL Account type based on GL account number
          l_saknr = it_gl_detail2-saknr.
          SHIFT l_saknr LEFT DELETING LEADING '0'.
          IF l_saknr CP '1*'.
            it_acctcode-glact_type = c_a.
          ELSEIF l_saknr CP '2*'.
            it_acctcode-glact_type = c_l.
          ELSEIF l_saknr CP '3*'.
            it_acctcode-glact_type = c_q.
    Start of Addition by C.Ramesh Babu on 11/04/2005   "DR1K907900
          ELSEIF l_saknr CP '4*'.
            it_acctcode-glact_type = c_l.
    End of Addition by C.Ramesh Babu on 11/04/2005   "DR1K907900
          ELSEIF l_saknr CP '5*'.
            it_acctcode-glact_type = c_r.
          ELSEIF l_saknr CP '6*'.
            it_acctcode-glact_type = c_e.
          ELSEIF l_saknr CP '7*'.
            it_acctcode-glact_type = c_t.
          ENDIF.
          it_acctcode-fi_line      = 'CDR'.
          it_acctcode-coa_code     = 'GLOBAL'.
          it_acctcode-act_defcode  = '001'.
          it_acctcode-field11      = '11'.
          APPEND :it_acctcode.
          CLEAR  :it_acctcode,it_gl_detail2.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    "PROCESS_ACCTCODE
    *&      Form  PROCESS_ENTITYCODE
      Form to Populate Entiti data to Output file internal table        *
    FORM process_entitycode.
      IF NOT it_company_list[] IS INITIAL.
        LOOP AT it_company_list.
          SHIFT it_company_list-company LEFT DELETING LEADING '0'.
          MOVE it_company_list-company TO it_entitycode-entity_code.
          MOVE it_company_list-name1   TO it_entitycode-com_desc.
          it_entitycode-coa_code    = 'GLOBAL'.
          it_entitycode-field11     = '11'.
          APPEND it_entitycode.
          CLEAR : it_company_list,it_entitycode.
        ENDLOOP.
      ENDIF.
    ENDFORM.                    "PROCESS_ENTITYCODE
    *&      Form  PROCESS_ATTRIBCODE
        Form to Populate Attribute data to output file internal table   *
    FORM process_attribcode.
    Getting data from T001.
      SELECT * FROM t001 INTO TABLE it_t001.
      LOOP AT it_t001.
        MOVE c_rassc TO it_attribcode-attrib_code.
        MOVE it_t001-bukrs TO  it_attribcode-attrib_value.
        MOVE c_tradptn TO it_attribcode-attrib_desc.
        it_attribcode-field11 = '11'.
        APPEND it_attribcode.
        CLEAR it_attribcode.
      ENDLOOP.
    Getting data from table ZDATSRC_T.
      SELECT * FROM zdatsrc_t INTO TABLE it_zdatsrc.
      LOOP AT it_zdatsrc.
        MOVE c_dtsrce TO it_attribcode-attrib_code.
        MOVE it_zdatsrc-zdatsrc TO  it_attribcode-attrib_value.
        MOVE c_datsrc TO it_attribcode-attrib_desc.
        it_attribcode-field11 = '11'.
        APPEND it_attribcode.
        CLEAR it_attribcode.
      ENDLOOP.
    Getting data from table SKA1.
      SELECT * FROM ska1 INTO TABLE it_ska1.
      LOOP AT it_ska1.
        MOVE c_sacct TO it_attribcode-attrib_code.
        MOVE it_ska1-saknr TO  it_attribcode-attrib_value.
        MOVE c_glacc TO it_attribcode-attrib_desc.
        it_attribcode-field11 = '11'.
        APPEND it_attribcode.
        CLEAR it_attribcode.
      ENDLOOP.
    Getting data from table T003.
      SELECT * FROM t003 INTO TABLE it_t003.
      LOOP AT it_t003.
        MOVE c_docty TO it_attribcode-attrib_code.
        MOVE it_t003-blart TO  it_attribcode-attrib_value.
        MOVE c_doctyp TO it_attribcode-attrib_desc.
        it_attribcode-field11 = '11'.
        APPEND it_attribcode.
        CLEAR it_attribcode.
      ENDLOOP.
    Getting data from table T856.
      SELECT * FROM t856 INTO TABLE it_t856.
      LOOP AT it_t856.
        MOVE c_trxtp TO it_attribcode-attrib_code.
        MOVE it_t856-trtyp TO  it_attribcode-attrib_value.
        MOVE c_trantyp TO it_attribcode-attrib_desc.
        it_attribcode-field11 = '11'.
        APPEND it_attribcode.
        CLEAR it_attribcode.
      ENDLOOP.
    ENDFORM.                    "PROCESS_ATTRIBCODE
    *&      Form  PROCESS_GLBAL
      Form to Populate GL Balance data to Output file internal table    *
    FORM process_glbal.
      DATA : l_ctran_amt(21),
             l_cusd_amt(21).
      LOOP AT it_zgeist_data INTO wa_it_zgeist_data1.
    *Start of change by 501030559 on 11/04/2005
       it_glbal-gl_reccode = '04'.
         it_glbal-gl_reccode = '05'.
    *End of change by 501030559 on11/04/2005
        it_glbal-gl_entity  = wa_it_zgeist_data1-rbukrs.
        it_glbal-gl_accnum  = wa_it_zgeist_data1-zzaltkt.
        it_glbal-site       = 'ERC'.
        it_glbal-currency_type = wa_it_zgeist_data1-rtcur.
        it_glbal-year = w_year.
        it_glbal-month = w_period.
        it_glbal-as_of_date = w_date.
        l_ctran_amt = wa_it_zgeist_data1-tslvt.
    Put sign to left side of the value
        IF l_ctran_amt LT 0.
          TRANSLATE l_ctran_amt USING ' 0'.
          CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
            CHANGING
              value = l_ctran_amt.
        ELSE.
    Trailing Zero's to the value
          SHIFT l_ctran_amt RIGHT DELETING TRAILING space.
          TRANSLATE l_ctran_amt USING ' 0'.
          REPLACE '0' WITH '' INTO l_ctran_amt.
        ENDIF.
        it_glbal-tran_cur_amt = l_ctran_amt.
        l_cusd_amt = wa_it_zgeist_data1-kslvt.
    Put Sign to leftside of the value
        IF l_cusd_amt LT 0.
          TRANSLATE l_cusd_amt USING ' 0'.
          CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
            CHANGING
              value = l_cusd_amt.
        ELSE.
    Trailing Zero's to the value
          SHIFT l_cusd_amt RIGHT DELETING  TRAILING space.
          TRANSLATE l_cusd_amt USING ' 0'.
          REPLACE '0' WITH '' INTO l_cusd_amt.
        ENDIF.
        it_glbal-usd_amount = l_cusd_amt.
        it_glbal-racct   = wa_it_zgeist_data1-racct.
        it_glbal-zzbewar = wa_it_zgeist_data1-zzbewar.
        it_glbal-zzdatsrc = wa_it_zgeist_data1-zzdatsrc.
        it_glbal-zzblart  = wa_it_zgeist_data1-zzblart.
        it_glbal-rassc  = wa_it_zgeist_data1-rassc.
        it_glbal-field11 = '11'.
        APPEND it_glbal.
        CLEAR : wa_it_zgeist_data1, it_glbal.
      ENDLOOP.
    ENDFORM.                    "PROCESS_GLBAL
    *&      Form  PROCESS_GLOBALSAP
       Form to Populate COntrol data to Output file internal table      *
    FORM process_globalsap.
      DATA :l_total(9),
            l_len(3) type c.
    Logic to get Time Zone
      w_timediff  = sy-tzone.
      IF sy-tzone LT '0'.
        w_timediff = sy-tzone * -1.
        CONCATENATE 'GMT-' w_timediff(4) INTO w_timezone.
      ELSE.
        w_timediff = sy-tzone.
        CONCATENATE 'GMT+' w_timediff(4) INTO w_timezone.
      ENDIF.
      LOOP AT S_EMAIL.
        CONCATENATE C_USERID S_EMAIL-LOW ',' INTO C_USERID.
      ENDLOOP.
      l_len = strlen( c_userid ).
      l_len = l_len - 1.
      c_userid = c_userid+0(l_len).
      it_globalsap-clnt_name    = 'ERC'.
      it_globalsap-source_name  = 'GLOBALSAP'.
      it_globalsap-as_of_date   = w_date.
      it_globalsap-time_stamp   = sy-uzeit.
      it_globalsap-time_zone    = w_timezone.
      it_globalsap-num_of_files = w_file_count.
      MOVE w_tot_recs TO l_total.
      SHIFT l_total RIGHT DELETING TRAILING space.
      TRANSLATE l_total USING ' 0'.
      it_globalsap-num_of_records = l_total.
      it_globalsap-user_ids = c_userid.
      it_globalsap-field11  = '11'.
      APPEND it_globalsap.
      CLEAR it_globalsap.
    ENDFORM.                  "PROCESS_GLOBALSAP
    *&      Form  COUNT_RECORDS
    Form to count total number of records Downlaoded                   *
    FORM count_records.
      DESCRIBE TABLE it_coacode    LINES w_cnt1.
      DESCRIBE TABLE it_acctcode   LINES w_cnt2.
      DESCRIBE TABLE it_entitycode LINES w_cnt3.
      DESCRIBE TABLE it_attribcode LINES w_cnt4.
      DESCRIBE TABLE it_glbal      LINES w_cnt5.
      w_tot_recs = w_cnt1 + w_cnt2 + w_cnt3 + w_cnt4 + w_cnt5.
    ENDFORM.                    "COUNT_RECORDS
    *&      Form  get_zgeist_data
    Form used to fetch data from ZGEIST table for the GL BAL file
    FORM get_zgeist_data .
      PERFORM get_period_year.
      SELECT * INTO TABLE it_zgeist_data_all
               FROM zgeist
               WHERE rldnr  EQ 'GG'
               AND   ryear  EQ w_year
               AND   rrcty  EQ 0
               AND   rpmax  EQ '016'
               AND  ( zzaltkt GE '1000000000' AND zzaltkt LE '4500000000' )
               AND   rzzstagr = space.
      sort it_zgeist_data_all by rbukrs rldnr zzaltkt racct
                                 zzdatsrc zzbewar zzblart rtcur rassc.
      LOOP AT it_zgeist_data_all INTO wa_it_zgeist_data.
        IF wa_it_zgeist_data-zzaltkt EQ space.
          wa_it_zgeist_error_data-rldnr = wa_it_zgeist_data-rldnr.
          wa_it_zgeist_error_data-rrcty = wa_it_zgeist_data-rrcty.
          wa_it_zgeist_error_data-rvers = wa_it_zgeist_data-rvers.
          wa_it_zgeist_error_data-ryear = wa_it_zgeist_data-ryear.
          wa_it_zgeist_error_data-rbukrs = wa_it_zgeist_data-rbukrs.
          wa_it_zgeist_error_data-robjnr = wa_it_zgeist_data-robjnr.
          wa_it_zgeist_error_data-cobjnr = wa_it_zgeist_data-cobjnr.
          wa_it_zgeist_error_data-sobjnr = wa_it_zgeist_data-sobjnr.
          wa_it_zgeist_error_data-rtcur = wa_it_zgeist_data-rtcur.
          wa_it_zgeist_error_data-runit = wa_it_zgeist_data-runit.
          wa_it_zgeist_error_data-drcrk = wa_it_zgeist_data-drcrk.
          wa_it_zgeist_error_data-rpmax = wa_it_zgeist_data-rpmax.
          APPEND wa_it_zgeist_error_data TO it_zgeist_error_data.
        ELSE.
          it_zgeist_data1-rbukrs   = wa_it_zgeist_data-rbukrs.
          it_zgeist_data1-rldnr    = wa_it_zgeist_data-rldnr.
          it_zgeist_data1-zzaltkt  = wa_it_zgeist_data-zzaltkt.
          it_zgeist_data1-racct    = wa_it_zgeist_data-racct.
          it_zgeist_data1-zzdatsrc = wa_it_zgeist_data-zzdatsrc.
          it_zgeist_data1-zzbewar  = wa_it_zgeist_data-zzbewar.
          it_zgeist_data1-zzblart  = wa_it_zgeist_data-zzblart.
          it_zgeist_data1-rassc  = wa_it_zgeist_data-rassc.
          it_zgeist_data1-rtcur    = wa_it_zgeist_data-rtcur.
          PERFORM get_tslvt_kslvt_values USING w_period.
          COLLECT it_zgeist_data1.
        ENDIF.
        CLEAR : wa_it_zgeist_data, wa_it_zgeist_error_data,
                it_zgeist_data1.
      ENDLOOP.
      it_zgeist_data[] = it_zgeist_data1[].
    ENDFORM.                    " get_zgeist_data
    *&      Form  write_error_report
    Form used to display error data for the GL BAL fetched data
    FORM write_error_report .
      DATA : l_text(80) TYPE c.
      CASE w_period.
        WHEN '001' OR '01'.
          l_text = text-e01.
        WHEN '002' OR '02'.
          l_text = text-e02.
        WHEN '003' OR '03'.
          l_text = text-e03.
        WHEN '004' OR '04'.
          l_text = text-e04.
        WHEN '005' OR '05'.
          l_text = text-e05.
        WHEN '006' OR '06'.
          l_text = text-e06.
        WHEN '007' OR '07'.
          l_text = text-e07.
        WHEN '008' OR '08'.
          l_text = text-e08.
        WHEN '009' OR '09'.
          l_text = text-e09.
        WHEN '010' OR '10'.
          l_text = text-e10.
        WHEN '011' OR '11'.
          l_text = text-e11.
        WHEN '012' OR '12'.
          l_text = text-e12.
        WHEN '013' OR '13'.
          l_text = text-e13.
        WHEN '014' OR '14'.
          l_text = text-e14.
        WHEN '015' OR '15'.
          l_text = text-e15.
        WHEN '016' OR '16'.
          l_text = text-e16.
      ENDCASE.
      SKIP 2.
      WRITE:/45 text-h01 COLOR COL_HEADING.
      SKIP 2.
      FORMAT COLOR 4.
      WRITE:/(234) sy-uline.
      WRITE:/1   sy-vline,
             2   text-h02,
             9   sy-vline,
             10  text-h03,
             19  sy-vline,
             20  text-h04,
             28  sy-vline,
             29  text-h05,
             41  sy-vline,
             42  text-h06,
             49  sy-vline,
             50  text-h07,
             69  sy-vline,
             70  text-h08,
             89  sy-vline,
             90  text-h09,
             109 sy-vline,
             110 text-h10,
             119 sy-vline,
             120 text-h11,
             130 sy-vline,
             131 text-h12,
             144 sy-vline,
             145 text-h13,
             152 sy-vline,
             153 text-h14,
             234 sy-vline.
      WRITE:/(234) sy-uline.
      FORMAT COLOR OFF.
      LOOP AT it_zgeist_error_data INTO wa_it_zgeist_error_data.
        FORMAT COLOR 2.
        WRITE:/1   sy-vline,
               4   wa_it_zgeist_error_data-rldnr,
               9   sy-vline,
               13  wa_it_zgeist_error_data-rrcty,
               19  sy-vline,
               22  wa_it_zgeist_error_data-rvers,
               28  sy-vline,
               32  wa_it_zgeist_error_data-ryear,
               41  sy-vline,
               42  wa_it_zgeist_error_data-rbukrs,
               49  sy-vline,
               50  wa_it_zgeist_error_data-robjnr,
               69  sy-vline,
               70  wa_it_zgeist_error_data-cobjnr,
               89  sy-vline,
               90  wa_it_zgeist_error_data-sobjnr,
               109 sy-vline,
               112 wa_it_zgeist_error_data-rtcur,
               119 sy-vline,
               123 wa_it_zgeist_error_data-runit,
               130 sy-vline,
               135 wa_it_zgeist_error_data-drcrk,
               144 sy-vline,
               147 wa_it_zgeist_error_data-rpmax,
               152 sy-vline,
               153 l_text,
               234 sy-vline.
        FORMAT COLOR OFF.
      ENDLOOP.
      WRITE:/(234) sy-uline.
    ENDFORM.                    " write_error_report
    *&      Form  get_tslvt_kslvt_values
    Form used to get TSLxx & KSLxx values for the period fetched
    FORM get_tslvt_kslvt_values USING period.
    FIELD-SYMBOLS : <f1> TYPE ANY,
                     <f2> TYPE ANY.
    DATA : l_tslvt_val(25) VALUE 'wa_it_zgeist_data-tsl',
            l_kslvt_val(25) VALUE 'wa_it_zgeist_data-ksl',
            l_tslvt TYPE tslvt9,
            l_kslvt TYPE kslvt9,
            l_period TYPE poper.
      clear l_period.
      l_period = period.
      DO l_period TIMES.
          CONCATENATE  l_tslvt_val  l_period+1(2) INTO  l_tslvt_val.
          CONCATENATE   l_kslvt_val l_period+1(2) INTO  l_kslvt_val.
        ASSIGN (l_tslvt_val) TO <f1>.
        l_tslvt = <f1>.
        it_zgeist_data1-tslvt = it_zgeist_data1-tslvt + l_tslvt.
        ASSIGN (l_kslvt_val) TO <f2>.
        l_kslvt = <f2>.
        it_zgeist_data1-kslvt = it_zgeist_data1-kslvt + l_kslvt.
        l_period = l_period - 1.
        clear : l_tslvt, l_kslvt, l_tslvt_val, l_kslvt_val.
        l_tslvt_val = 'wa_it_zgeist_data-tsl'.
        l_kslvt_val = 'wa_it_zgeist_data-ksl'.
        if l_period = 0.
          exit.
        endif.
      ENDDO.
    ENDFORM.                    "get_tslvt_kslvt_values
    *&      Form  process_ftp_file
    Form used to connect & disconnect to Informatica Server using FTP
    Also, used to transfer files to the Informatica location
    -->  p1        text
    <--  p2        text
    FORM process_ftp_file .
      DATA: l_slen     TYPE i,
            l_error,
            l_pwd(30)  TYPE c.
      CONSTANTS: c_dest TYPE rfcdes-rfcdest VALUE 'SAPFTP',
                 c_key  TYPE i              VALUE 26101957.
      l_error = 0.
    connect to ftp server
      l_pwd = p_pwd.
      l_slen = STRLEN( l_pwd ).
      CALL FUNCTION 'HTTP_SCRAMBLE'
        EXPORTING
          SOURCE      = l_pwd
          sourcelen   = l_slen
          key         = c_key
        IMPORTING
          destination = l_pwd.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING
          text = 'Connect to FTP Server'.
    To Connect to the Server using FTP
      CALL FUNCTION 'FTP_CONNECT'
        EXPORTING
          user            = p_user
          password        = l_pwd
          host            = p_host
          rfc_destination = c_dest
        IMPORTING
          handle          = w_hdl
        EXCEPTIONS
          OTHERS          = 1.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CLEAR : w_outfile, w_file_count.
      MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_COACODE' TO w_outfile.
      PERFORM download_to_ftp TABLES it_coacode USING w_outfile.
      w_file_count = w_file_count + 1.
      CLEAR : w_outfile.
      MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ACCTCODE' TO w_outfile.
      PERFORM download_to_ftp TABLES it_acctcode USING w_outfile.
      w_file_count = w_file_count + 1.
      CLEAR : w_outfile.
      MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ENTITYCODE' TO w_outfile.
      PERFORM download_to_ftp TABLES it_entitycode USING w_outfile.
      w_file_count = w_file_count + 1.
      CLEAR : w_outfile.
      MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ATTRIBCODE' TO w_outfile.
      PERFORM download_to_ftp TABLES it_attribcode USING w_outfile.
      w_file_count = w_file_count + 1.
      CLEAR : w_outfile.
      MOVE 'ERC/GLOBALSAP/ERC_GLOBALSAP_GLBAL' TO w_outfile.
      PERFORM download_to_ftp TABLES it_glbal USING w_outfile.
      w_file_count = w_file_count + 1.
      CLEAR : w_outfile, w_tot_recs.
      PERFORM count_records.
      PERFORM process_globalsap.
      MOVE 'ERC/GLOBALSAP/C_ERC_GLOBALSAP' TO w_outfile.
      PERFORM download_to_ftp TABLES it_globalsap USING w_outfile.
    To disconnect the FTP
      CALL FUNCTION 'FTP_DISCONNECT'
        EXPORTING
          handle = w_hdl.
    To disconnect the RFC Connection
      CALL FUNCTION 'RFC_CONNECTION_CLOSE'
        EXPORTING
          destination = c_dest
        EXCEPTIONS
          OTHERS      = 1.
    ENDFORM.                    " process_ftp_file
    *&      Form  download_to_ftp
    Form to put the files in the Informatica Location using FTP
    Path is ERC\GLOBALSAP\<filename>
    FORM download_to_ftp TABLES it_tab
                         USING l_string TYPE char64.
      CALL FUNCTION 'FTP_R3_TO_SERVER'
        EXPORTING
          handle         = w_hdl
          fname          = l_string
          character_mode = 'X'
        TABLES
          text           = it_tab[]
        EXCEPTIONS
          tcpip_error    = 1
          command_error  = 2
          data_error     = 3
          OTHERS         = 4.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
                RAISING invalid_output_file.
      ENDIF.
    ENDFORM.                    " download_to_ftp
    *&      Form  get_period_year
    Form to fill the Period & Year based on the Sy-datum
    FORM get_period_year .
      DATA : l_month(2) TYPE c,
             l_day(2)   TYPE c,
             l_year(4)  TYPE c.
      l_year  = sy-datum+0(4).
      l_month = sy-datum+4(2).
      l_day   = sy-datum+6(2).
      CASE l_month.
        WHEN '01'.
          IF l_day <= '15'.
            w_period = '12'.
            w_year = l_year - 1.
          ELSE.
            w_period = '1'.
            w_year = l_year.
          ENDIF.
        WHEN '02'.
          IF l_day <= '15'.
            w_period = '1'.
            w_year = l_year.
          ELSE.
            w_period = '2'.
            w_year = l_year.
          ENDIF.
        WHEN '03'.
          IF l_day <= '15'.
            w_period = '2'.
            w_year = l_year.
          ELSE.
            w_period = '3'.
            w_year = l_year.
          ENDIF.
        WHEN '04'.
          IF l_day <= '15'.
            w_period = '3'.
            w_year = l_year.
          ELSE.
            w_period = '4'.
            w_year = l_year.
          ENDIF.
        WHEN '05'.
          IF l_day <= '15'.
            w_period = '4'.
            w_year = l_year.
          ELSE.
            w_period = '5'.
            w_year = l_year.
          ENDIF.
        WHEN '06'.
          IF l_day <= '15'.
            w_period = '5'.
            w_year = l_year.
          ELSE.
            w_period = '6'.
            w_year = l_year.
          ENDIF.
        WHEN '07'.
          IF l_day <= '15'.
            w_period = '6'.
            w_year = l_year.
          ELSE.
            w_period = '7'.
            w_year = l_year.
          ENDIF.
        WHEN '08'.
          IF l_day <= '15'.
            w_period = '7'.
            w_year = l_year.
          ELSE.
            w_period = '8'.
            w_year = l_year.
          ENDIF.
        WHEN '09'.
          IF l_day <= '15'.
            w_period = '8'.
            w_year = l_year.
          ELSE.
            w_period = '9'.
            w_year = l_year.
          ENDIF.
        WHEN '10'.
          IF l_day <= '15'.
            w_period = '9'.
            w_year = l_year.
          ELSE.
            w_period = '10'.
            w_year = l_year.
          ENDIF.
        WHEN '11'.
          IF l_day <= '15'.
            w_period = '10'.
            w_year = l_year.
          ELSE.
            w_period = '11'.
            w_year = l_year.
          ENDIF.
        WHEN '12'.
          IF l_day <= '15'.
            w_period = '11'.
            w_year = l_year.
          ELSE.
            w_period = '12'.
            w_year = l_year.
          ENDIF.
      ENDCASE.
    ENDFORM.                    " get_period_year

  • How to find the 1(one week) performance of the system

    HI every one
    in my recent interview he has asked this question
    i have checked the sar options through man pages but i couldnt understand ...
    can any one please tell me how to find the on week performance report of a system......
    please tell me how i can find the performnace reports
    Thanks in Advance

    Hi.
    crontab -l sys
    Show, activated or not collecting of performance statistics.
    man sa1
    The shell script sa1, a variant of sadc, is used to collect
    and store data in the binary file /var/adm/sa/sadd, where dd
    is the current day.
    So you need found file with correct date in /var/adm/sa
    Regards.

  • How to find the Project and wbs Element System Status

    Hi all,
      How to find the Project and wbs Element System Status.
      We can find the system status in the CJ20n transaction but I want the table and field name where it is stored.
    Regards
    Raghavendra

    Hi,
    try table <b>jest</b> with key = prps-objnr
    Andreas

  • How to find the Version of CRM system

    Hi All,
    I have to install CRM system and I dont have any other information other than the EWA Report, Can any one let me know how to find the Version of CRM system and we dont have Java installed in it (Generally we check WEBCUIF but as we dont have Java I cannot see the Package). Can I go with the CRMUIF ?? .
    I have Pasted the information of Support Package Maintenance, that is available in EWA Report.
    BBPCRM
    600
    4
    13
    SAP BBPCRM Server
    CRMUIF
    600
    4
    17
    SAPK-60004INCRMUIF
    SAP CRM User Interface Framework
    PI_BASIS
    2005_1_700
    16
    26
    SAP R/3 Basis Plug-In
    SAP_ABA
    700
    16
    29
    SAP Application Basis
    SAP_AP
    700
    13
    29
    SAP_BASIS
    700
    16
    29
    SAP Basis Component
    SAP_BW
    700
    18
    31
    SAP Business Information Warehouse
    ST-A/PI
    01P_700
    0
    SAPKITAB7I
    SAP Service Tools for Applications Plug-In
    ST-PI
    2008_1_700
    6
    8
    SAP Solution Tools Plug-In
    Please let me Know. Thanks in Advance.
    Vijay

    Hi,
    Logically your Status bar should show that.
    Login to gui. --> system -> Status
    and then you should see the crm version in your Component version.
    SAP CRM ABAP 6.0
    You should go with
    BBPCRM
    600
    Thanks
    Rishi abrol

Maybe you are looking for

  • Opinion of creating s/w for using JDBC

    Hi, Can anyone pls give opinion regarding this case. I plan to create a JDBC s/w which is used to connect to linux server.The Database that i m going to use is mySQL for storage and use red hat linux 9.0 for client platform. My questions are : 1) I h

  • TRANSFERRING PHONEBOOK TO PIONEER HEAD UNIT

    Just purchased a new Pioneer AVH-P4100DVD automobile head unit, and I have synched the my iPhone 3G, but I'm having problems transferring my phone's "contact information" to the head unit. Without access to the iPhone's phonebook, it's really annoyin

  • [LP 7.2] Tascam US-2400 detected as both Native and MCU + XT.  Help.

    I just purchased Logic Pro 7.2 last week and for whatever reason my Tascam Us-2400, which has the latest firmware and is set for Native (Send + AUX5) mode, is detected twice when I launch Logic Pro 7.2. LP sees it first as a US-2400 Native and then a

  • Qualify as a student

    I am a postgraduate student who is studying for a masters at university. Under the student eligibility it states that to qualify a you need to be enrolled on a course that takes a minimum of two years full study to complete. However, as I am enrolled

  • Passing parameters to function

    hi :) how can i pass acdm_Repeater.currentItem.@help to a OpenWindow() function? what would i put inside the ()? Thanks!