How to find the workflow for Change Request for the PO's
Hi All,
We have a PO which is pending and we can't receipt it again nor make payment on this. After checking the Approval history for that PO we found that the change request has been made. The change request was to change the amount to be paid to R39196 instead of R58237.00. We don't know where to check the workflow for the change request to identify the cause.
what i need to know is how to find the workflow for that change request? The other workflows can be checked using the po_header_id for the PO's but i am confused with the change request workflow
Your input will be highly appreciated.
Thanks in advance
Rgds,
Sonia
For 11.5.10.2 run this query to determine the keys to search on:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'PO' and Document_num = 'put-PO-number-here'
Then use the keys returned by the query to look up the Workflow in
Workflow Administrator Web Applications / Administrator Workflow / Status Monitor
Search using the results returned in fields "Type Internal Name" and "Item Key" in Status Monitor
The query for change requests on a specific Requisition would be:
Select wf_item_type, wf_item_key from APPS.po_change_requests where document_type = 'REQ' and Document_num = 'put-Req-number-here'
Similar Messages
-
Usage of Company code field in the Change Request for Company
Hi,
Would like to know the usage of - Company code field in the UI for Change request for Company.
1. If a new Company is created, can i assign the company code directly in the UI, will the assignment also replicated to backend in this case?
2. In case of new Company creation, is it possible for multiple company code assignments?
3. Is it possible to to pick the existing Company from the F4 list in the CR and assign the company code in the CR? How about the replication work in this case?
Please share your comments, Thank you.Thanks Sanjay.
Just to summarize and a bit more specific, here is my understanding:
1. (a). You have mentioned that we can assign new company code also - does this mean i can select a company code which is not in the F4 list? In such case, how will be the assignment replicated? It should ideally create a company code in the backend before the assignment is processed.
(b). Usually, if a new company code is created in backend, i need to load that in to MDG tables such that it will be active in MDG F4 list, for Company assignments in the Change request.
2. Understood
3. In the Change request, if i pick existing company from F4 values and edit company related data, it will be replicated accordingly.
In the same CR, if i give some value in the company code data, the replication will result in one more assignment added to the company, so as on date, SAP has given the option of only additional assignments to the existing assignments. -
I am the administrator of my MacBook Pro, which I share with my kids. One of them forgot his password, so as the admin I changed it for his account, but when I try to see his account, it says I need to provide the keychain password. How can i get it? I have no idea how to sort this out...
First, make sure caps lock is not on.
You must back up all data before continuing, unless you've already done so. If you need to back up but can't log in, ask for instructions.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on -
How to find block free space and PCTUSED FOR THE TABLE
HI all,
Due to performance issues for my database , my management ask me to reset the PCTUSED and PCTFREE values , and my doubt is
1)How to find the current PCTUSED and PCTFREE values.
2)How to find block free space and PCTUSED FOR THE TABLE.
Please help me out regarding this.
Regards,
Vamsi.1)version is 10.2.0.4
2)output of query
tablespace extent_management allocation_type segment_space_management
SYSTEM LOCAL SYSTEM MANUAL
UNDOTBS1 LOCAL SYSTEM MANUAL
SYSAUX LOCAL SYSTEM AUTO
TEMP LOCAL UNIFORM MANUAL
USERS LOCAL SYSTEM AUTO
UNDOTBS2 LOCAL SYSTEM MANUAL
INS LOCAL SYSTEM AUTO
CONFTBS LOCAL SYSTEM AUTO
REINS LOCAL SYSTEM AUTO
ANALYST LOCAL SYSTEM AUTO
BI LOCAL SYSTEM AUTO
INTRFC LOCAL SYSTEM AUTO
COGNOS LOCAL SYSTEM AUTO
TS_INDX LOCAL SYSTEM AUTO
TS_CHOLAWEB LOCAL SYSTEM AUTO
TS_DASBOARD LOCAL SYSTEM AUTO -
my daughter has created an imovie for a school project, last time she did this and downloaded it onto her memory stick the teach could not play it on their windows pc, how do we convert it or change it so the teacher can play. thank you
Meg\'s Dad wrote:
… I assume this format is what is needed to play on the class "Smart Board" also? …
here in ol' Europe, school boards use chalk and are not smart …
h264.mp4 is actually the most common 'standard' (4000 video 'standards' aaaaand counting)
mp4 is indeed universal (Mac, Windows, Linux), and since YouTube, the h264 codec has a good installed base .....
you can bump into probs only when it comes to sheer amount of data:
for instance cheap 'digital frames' are sortof over-whelmed, if you try to playback 720/30p in high quality.
I'm not familiar with 21st cent devices as SmartBoards ... again, it could happen, you have to reduce resolution/fps/bit-rate to avoid clutter&stutter in the video.
I'm using such encoded files successfully on Playstation3, WD HD TV or flatscreenTVs with integrated usb-connection (via stick), etc
imho, it should work welll .............. < fingers-crossed > -
Vacancy Creation - System is Prompting for Change Request
Hi Gurus,
I am opening the vacancy for a particular position through T Code - PO13.
At the time of saving, Pop-Up for Change Request is coming.
Kindly let me know How to remove this Pop-Up.
Thanks a Lot in Advance.
Regards,
PKGIn addition to client setting (SCC4) being set at "No changes allowed", software component settings in System Change Option (SE06) should also be maintained correctly. I haven't worked in R/3 environment for years now but from what I recollect, J1ID is a CIN transaction and hence you should have a corresponding software component or namespace object in system change option that could be maintained. I suspect that your current settings say "Restricted Modifiability". You may have to change it to "modifiable".
Also, please note that settings in SE06 do not affect client-specific settings.
Ashutosh -
How Can I know about any change happened in the page??
........... I Use JDev 11g ........
How Can I know if any change happened in the page???
for example:
I have a page and I press a creation button that create a new row in view object I want when I press any button that will call another page the page ask a user Are you want to save changes? before leaving a page.
Or
I edit the value in a view object but not committed ( I didn't commit the data in database ) . When I want to leave the page I want to display a message say : Are you want to save changes?
How can I do that?
Thank You...
Sameh NassarCheck out http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html Example 60. Do not go by the 'on page load' name... This approach will allow you to plug in your custom code at any 'phase' of your adf life cycle. You can capture any request coming from your page, and check for pending transaction states and act accordingly.. I realize that the reply is a little abstruse, but this is not a drag-drop-smile requirement.. :-)
http://download.oracle.com/docs/html/B25947_01/bcdcpal005.htm#sm0271
Julian -
How I use standar Workflow "Approve Travel Request"?
Hi,
I implemented in ESS the "trips and Expenses" option run correctly, but I dont know how I use(or active) workflow (when section in IMG for example)
I found the link
http://help.sap.com/saphelp_erp60_sp/helpdata/en/04/928bc146f311d189470000e829fbbd/content.htm
but I dont know web, please excuse me if the question is beginner
thanks for your posts and helps
Ivanhi Arghadip and Any
I reviewed the inbox in sender of the travel request
http://img28.imageshack.us/img28/3489/inbox.jpg
I entered log the message and workflow
http://img175.imageshack.us/img175/5951/workflowlogtripnoagents.jpg
It shows message "no agents"
http://img198.imageshack.us/img198/6858/workflowtrip.jpg
http://img208.imageshack.us/img208/853/workflowlogtrip.jpg (View of the workflow)
Sometime ago in my SAP system implemented the workflow "Leave Request" (implementation is succesful)
http://img411.imageshack.us/img411/7945/workflowleave.jpg (Inbox the sender of the leave request)
http://img514.imageshack.us/img514/8268/workflowleaveagents.jpg (the leave requests included agents)
sometimes ago, In my sap systeme implemented the "leave request", at the beginning of the implementation required this action:
<i><b>
To copy the standard workflow, go to transaction PFTC.
Select the task type u201CWorkflow templateu201D and enter the workflow number in the task number. Click on u201CCopy tasku201D.
WS12300111
</b></i>
I can apply the same in my travel request? how?
in my Agent grid in the workflow of "Travel Request" shows agent WF-batch
http://img638.imageshack.us/img638/8432/agentswf.jpg
In case of the "leave request" shows wf-batch and Manager (Quiroz) definided en the PPOME
http://img532.imageshack.us/img532/4/agentswfleaverequest.jpg
How I use the workflow template? (in my case is WS200000050)
thanks your post and help
Ivan -
How to find bpel instance in 11g based on the index values
We have 10g BPEL process where we define 4 index values for all the instances. Whenever support request comes, we ask index values and based on that we search the process instance.
We have migrated this 10g bpel process to 11g now. How to find bpel instance in 11g based on the index values ???I have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???
-
Need to know how to find out when a friend request was sent?
I really need to know how to find out when a friend request was sent. if anyone knows please tell me
Btw. The original purchase information on your app is available in your computer, in your iTunes account.
Click apps and find the app you are looking for.
Right click on the app and "get info"
This will show when it was purchased and under what Apple ID. -
How do I set-up my Dataset to pull data for Service Requests for a report
I am using SQL Server 2012 Report Builder 3.0.
I have my Data Source added - DWDataMart
I want to build my Dataset to query and find a very specific item. Basically I am creating a daily report that will show what each "team" or Support Group (AD Object) Closed that day. He also wants the ability to open it by date, so if he misses
a day he can get it later.
I am totally new to this report building and only got this far by following a guide on a blog, but he used incident Reports in his example, and I do not know what objects to query for service requests.
Thanks for any information you can provide.First, you will need to get the support group ID's in the warehouse before you can run reports for them. I found that putting these queries in their own stored procedure was a better path.
select IR.IncidentTierQueuesId, IR.IncidentTierQueuesValue
from dbo.IncidentTierQueues as IR
where IR.IncidentTierQueuesId != 0
select SR.ServiceRequestSupportGroupId, SR.ServiceRequestSupportGroupValue
from dbo.ServiceRequestSupportGroup as SR
where sr.ServiceRequestSupportGroupId != 0
Enter the the support group ID's into your work item query.
Incident information is in dbo.IncidentDim and Service Requests are found in dbo.ServiceRequestDim. Both incidents and service requests link to relationship data through dbo.WorkItemDim. You can INNER JOIN on BaseManagedEntityId to link the incident
or service request to the workitem entry and from there to the Assigned Users, Affected Users, or Affected Configuration Items. Each relationship has it's own separate fact views.
If you poke about in the tables, you will find it pretty easy to pull back all sorts of information from the data warehouse. -
In the middle of changing my password the Internet crashed. Now I can't find my original apple id. When I enter my date of birth I get an error msg! I'm not receiving any e-mails, I don't know what e-mail address it is so I check them all...NOTHING. I was forced to create a new ID only to discover all the Apps I've paid for on iPod won't sync, songs..same thing. I've created a new apple id. When I type in the old ID a msg says it exists..BUT WHERE IS IT!????? Why the **** does APPLE MAKE IT SO DIFFICULT? I mean the amount of times you have to re-enter your password is bloody ridiculous. Security CRAP. Online banking is more user friendly. I have eyestrain from reading all the data they have so you can solve the problem. I don't have the TIME! If I can't fix this problem, iTunes will be history! Can ANYONE HELP ME PLEEEEEESE????
Try calling apple and tell them about it or make them give u a REFUND
-
Can anyone tell me how to find what OS I'm using on the Mac?
Tiger or Leopard?
Also, how do I update from 10.6.8 to the latest version?Go to the Apple menu and select "About This Mac". You will get a window similar to this one -
You current OS X version number will be shown as I've marked.
OS X 10.4.x is Tiger, 10.5.x is Leopard, 10.6.x is Snow Leopard, 10.7.x is Lion, and 10.8.x is Mountain Lion.
Whether or not you can go to the latest OS X version depends upon your hardware -
You will need to purchase the retail set for the OS X version you want; there is no pint in getting and installing any intermediate versions. Once the retail version has been installed, you can update it to the latest release for that version via download updater. -
Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enclosing folders." What on earth does it mean? How can I stop this message from appearing?
See here:
I cannot save recent images. -
How to find out query name using Elements of the query builder.
Hi SDNers,
how to find out query name using Elements of the query .
thanks,
satyaaHi,
For having a look at the relation between BEx tables,check the link below:
http://wiki.sdn.sap.com/wiki/display/BI/ExploretherelationbetweenBEx+Tables
-Vikram
Maybe you are looking for
-
Lenovo 3000 N200 (0769) | Windows 7 | What driver do I need?
Hello, fist of all I'd like to mention that I am german and consequently am not familiar with all the technical terms in their english incarnation. I am going to describe what I mean the best way I can. Here's what happened: I fell victim to a virus
-
So my family used to share an itunes account and I bought music on that account. Now I have my own itunes account and my own ipod but I'm having trouble authorizing my computer to play the music that I bought on this old account. The email address fo
-
Sublist by using ALV OO can not be refreshed
Hi Gurus, i met with a very strange problem. i created a interactive list by using ALV OO and if you double click on one of the rows, the screen will go to a sublist which displays the detail information of the row. My question is every time i chose
-
After installing Windows SP3 - no PC Suite connect...
Can anyone help? Have recently installed Windows Service Pack 3 and could then no longer synchronise my E90 with PC Suite. The Nokia Connections Manager has no connections even when the phone is connected by USB cable. Have reinstalled PC Suite but n
-
Anyone having problems with activating Lightroom with Adobe CC?
I'm new to Adobe CC and I'm having some troubles with activating my Lightroom with Adobe CC. I payed for Lightroom and Photoshop CC and I didn't have any problems the last month, but since the new month has begun, I cant seem to figure out how to act