How to find total no of records in DSO
How to find the total no of records in a DSO?
Hi,
To check the num of entries in DSO,
in DSO the data always comes from Active data table(Since DSO has 3 tables-> New data,Active data, Change log tables)
just right click on DSO and go to manage DSO, then select "Active data table" tab and go to Contents.. There u can see the data which you loaded in to DSO... So there u can get num of entries..
Or
go to TCODE : SE11 and give ur Active DATA table name.. and click display....
then press ctrlshiftF5 to see the contents of tha table....
Thanks And Regars
MAnjunath P
Similar Messages
-
How to find total no of record in cube
Hi Experts,
How to find total no of records in a cube.
Thanks in Advance.Hi
If you want total number of records in a CUBE then you have to check in both F Table and E table.
Go to LISTSCHEMA tcode in your system, give your CUBE name and execute.
You will fine two table E and F table
goto SE16 -->give the table name and click on number of entries.You will get number of records.
Check the below thread
No of records in /size of Info cube
Regards,
Venkatesh -
How to find total number of records in a BDoc?
Dear all,
I have replicated about BP 1088 records from ISU into CRM system with block size 100. Technically on SMW01, for each successfully processed BDoc, there will be 100 records (corresponds to 100 block size). But due to some failed BDocs, not all "successfully" BDocs will have 100 records each, some may have only 1 record inside...or 30...or 88 for example. So, may i know how to find or is there a report i can look into to find the total number of records clearly shown for each of the successfully processed green status BDocs???
Please help and points will be rewards!!
Thank You
Best Regards,
CKI am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
SQL> create table emp_crap as select * from emp where 1 = 2;
Table created.
SQL> declare
2 v_cnt number := 0;
3 zero_rows exception;
4 begin
5 for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
6 loop
7 if v_cnt = 0 then
8 v_cnt := rec.rn;
9 end if;
10 end loop;
11 if v_cnt = 0 then
12 raise zero_rows;
13 end if;
14 exception
15 when zero_rows then
16 dbms_output.put_line('No rows');
17 end;
18 /
No rows
PL/SQL procedure successfully completed.
-- Now, let us use the table, which has the data
SQL> declare
2 v_cnt number := 0;
3 zero_rows exception;
4 begin
5 for rec in (select * from
6 (select rownum rn, e.ename from emp e)
7 order by 1 desc)
8 loop
9 if v_cnt = 0 then
10 v_cnt := rec.rn;
11 dbms_output.put_line(v_cnt);
12 end if;
13 end loop;
14 if v_cnt = 0 then
15 raise zero_rows;
16 end if;
17 exception
18 when zero_rows then
19 dbms_output.put_line('No rows');
20 end;
21 /
14
PL/SQL procedure successfully completed.Thx,
Sri -
How to find total count of records in a cursor
Aassume below is the cursor i defined
cursor c1 is select * from emp;
now, i want to find the total count of records in this cursor using an existing function etc., using one line statement.
FYI: c1%rowcount is always giving 0, so i cant rely on this.
Any thoughts, please share.
Thanks in advance.I am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
SQL> create table emp_crap as select * from emp where 1 = 2;
Table created.
SQL> declare
2 v_cnt number := 0;
3 zero_rows exception;
4 begin
5 for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
6 loop
7 if v_cnt = 0 then
8 v_cnt := rec.rn;
9 end if;
10 end loop;
11 if v_cnt = 0 then
12 raise zero_rows;
13 end if;
14 exception
15 when zero_rows then
16 dbms_output.put_line('No rows');
17 end;
18 /
No rows
PL/SQL procedure successfully completed.
-- Now, let us use the table, which has the data
SQL> declare
2 v_cnt number := 0;
3 zero_rows exception;
4 begin
5 for rec in (select * from
6 (select rownum rn, e.ename from emp e)
7 order by 1 desc)
8 loop
9 if v_cnt = 0 then
10 v_cnt := rec.rn;
11 dbms_output.put_line(v_cnt);
12 end if;
13 end loop;
14 if v_cnt = 0 then
15 raise zero_rows;
16 end if;
17 exception
18 when zero_rows then
19 dbms_output.put_line('No rows');
20 end;
21 /
14
PL/SQL procedure successfully completed.Thx,
Sri -
Hw to find total number of records
Hi All,
Can anyone help from these
1. how to find total number of reports for a particular cube/ods... need step - step solution
2. how to find total number of records for a particular Cube and ODS and Aggr's to till date.
3.what is sandbox,mirror sys,instance of a sys..?
4.what r TWS(Tivoli Workload Scheduler) jobs? how these r different to standard schedulers?
Thanks in ADv
LindaHello Linda,
As you have lots of answers on first 2 so i'll start from 3rd onward.
3. Sandbox is mostly practice system where you can do all kind of R&D, mirror sys can be mirror image of any system depends on the organization and instance of system is again mirror image of one system.
4. TWS is third party tool for scheduling which doesn't come along with SAP like standard scheduler as TWS has been prepared specially for this purpose so it has some more features than standard.
Hope it helps.
San. -
How to find total recs in a local table for a particular condition
Hi,
How to find total recs in a local table for a particular condition?
Thanks,
CDWell, you may want to try this as well, and compare to the LOOP way. Not sure what kind of overhead you may get doing this way. Here ITAB is our main internal table, and ITAB_TMP is a copy of it. Again I think there may be some overhead in doing the copy. Next, delete out all records which are the reverse of your condition. Then whatever is left is the rows that you want to count. Then simply do a LINES operator on the internal table, passing the number of lines to LV_COUNT.
data: itab type table of ttab.
data: itab_tmp type table of ttab.
itab_tmp[] = itab[].
delete table itab_tmp where fld1 <> 'A'.
lv_count = lines( itab_tmp ).
Regards,
Rich Heilman -
How to find the number of records per months in cube
Hi,
how to find the number of records per months for my all cubes?
Can i use the ListCube transaction to find totl number f records per cube monthwise ?
JimmyHi,
Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
1.Copy the code into your Z<programname> from Se38.
2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
3.Save program.
4.Schedule the program in background as required
5.Create cube with infoobjects to hold no of records and Infoprovider name
6.Load this cube based on event after the program job is done.
Hence you can report on this cube to see no of records in CUBE or ODS in your box.
Please find the code below.
Cheers,
Kavitha Kamesh.
types: begin of itabs ,
tabname type dd02l-tabname,
end of itabs.
data: itab type itabs occurs 0 with header line.
data: counter type i.
data: begin of itab1 occurs 0,
tabname type dd02l-tabname,
counter type i,
end of itab1.
DATA: ITABTABNAME TYPE STRING.
DATA: LENGTH TYPE I.
DATA: OBJECT(30).
data: str(6) type c.
select tabname from dd02l into table itab where ( tabname LIKE '/BIC/F%' or tabname LIKE '/BIC/A%00' )
and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
loop at itab.
select count(*) from (itab-tabname) into counter.
str = itab-tabname.
if str = '/BIC/F'.
LENGTH = STRLEN( ITAB-TABNAME ).
SHIFT itab-tabname BY 6 PLACES LEFT.
ELSEIf str = '/BIC/A'.
SHIFT itab-tabname BY 6 PLACES LEFT.
LENGTH = STRLEN( ITAB-TABNAME ).
LENGTH = LENGTH - 2.
endif.
itab1-tabname = itab-tabname(LENGTH).
append itab1.
itab1-counter = counter.
clear itab-tabname.
clear: COUNTER.
endloop.
*********** itab1
loop at itab1.
write:/ itab1-tabname, itab1-counter.
endloop.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
* BIN_FILESIZE =
FILENAME = 'c:records.xls'
FILETYPE = 'ASC'
* APPEND = ' '
WRITE_FIELD_SEPARATOR = ','
* HEADER = '00'
* TRUNC_TRAILING_BLANKS = ' '
* WRITE_LF = 'X'
* COL_SELECT = ' '
* COL_SELECT_MASK = ' '
* DAT_MODE = ' '
* CONFIRM_OVERWRITE = ' '
* NO_AUTH_CHECK = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* WRITE_BOM = ' '
* TRUNC_TRAILING_BLANKS_EOL = 'X'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* IMPORTING
* FILELENGTH =
TABLES
DATA_TAB = itab1
* FIELDNAMES =
* EXCEPTIONS
* FILE_WRITE_ERROR = 1
* NO_BATCH = 2
* GUI_REFUSE_FILETRANSFER = 3
* INVALID_TYPE = 4
* NO_AUTHORITY = 5
* UNKNOWN_ERROR = 6
* HEADER_NOT_ALLOWED = 7
* SEPARATOR_NOT_ALLOWED = 8
* FILESIZE_NOT_ALLOWED = 9
* HEADER_TOO_LONG = 10
* DP_ERROR_CREATE = 11
* DP_ERROR_SEND = 12
* DP_ERROR_WRITE = 13
* UNKNOWN_DP_ERROR = 14
* ACCESS_DENIED = 15
* DP_OUT_OF_MEMORY = 16
* DISK_FULL = 17
* DP_TIMEOUT = 18
* FILE_NOT_FOUND = 19
* DATAPROVIDER_EXCEPTION = 20
* CONTROL_FLUSH_ERROR = 21
* OTHERS = 22
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
How to find the number of records in ods?
how to find the number of records in ods?
Pls suggest the solution apart going to the table of ods and seeing the number of records.
Is there any program or function module to see the number of records in ods?
For eg: SAP_INFOCUBE_DESIGNS is a program which gives the detail (number of records) of infocube.Hi,
I was looking at this and found the following tables that may be of help.
One of these tables will include a summary of the record count of all the tables in your system based on the last time each table had it's database statistics calculated:
DBSTATTADA
DBSTATTDB2
DBSTATTDB4
DBSTATTDB6
DBSTATTINF
DBSTATTMSS
DBSTATTORA
We run on an Oracle database so the table record counts can be taken from DBSTATTORA. Type in AZ in table selection field in SE16 to restrict the output to ODS (or DSO) tables only.
The record count is at the time indicated in the timestamp field. Obviously this is not real time but should not be too out of date - if it is you may be having performance issues and should get your DBA / Basis to run a full refresh of DB stats.
Hope this helps, alhtough not real time the table should give you a decent indication of the size of all your ODS objects (or any other table for that matter!) -
Hi ,
How to find out the latest Record in per_all_people_f and per_all_assignments_f
Requirement : Need to find out the latest record in per_all_people_f and per_all_assignments_f to update the attribute column with pre defined value . Its not possible to track only with person_id / assignment_id and effective end date
SELECT pp_id
FROM (SELECT app.person_id pp_id,
asf.*
FROM apps.per_all_people_f app,
apps.per_all_assignments_f asf
WHERE --app.person_id=123568 and
asf.person_id = app.person_id AND
app.effective_end_date = to_date('31-dec-4712') AND
asf.effective_end_date = to_date('31-dec-4712')
GROUP BY app.person_id)
HAVING COUNT(pp_id) > 1
GROUP BY pp_id
This query also returns more than 1 value for person_id .
It would be great if you put comment on this .. Thanks in advance ,
AryaI am getting more records with asf.primary_flag='Y' . If you give ur mail id , i will send the sample data
ASSIGNMENT_ID EFFECTIVE_START_DATE EFFECTIVE_END_DATE BUSINESS_GROUP_ID RECRUITER_ID GRADE_ID POSITION_ID JOB_ID ASSIGNMENT_STATUS_TYPE_ID PAYROLL_ID LOCATION_ID PERSON_REFERRED_BY_ID SUPERVISOR_ID SPECIAL_CEILING_STEP_ID PERSON_ID RECRUITMENT_ACTIVITY_ID SOURCE_ORGANIZATION_ID ORGANIZATION_ID PEOPLE_GROUP_ID SOFT_CODING_KEYFLEX_ID VACANCY_ID PAY_BASIS_ID ASSIGNMENT_SEQUENCE ASSIGNMENT_TYPE PRIMARY_FLAG APPLICATION_ID ASSIGNMENT_NUMBER CHANGE_REASON COMMENT_ID DATE_PROBATION_END DEFAULT_CODE_COMB_ID EMPLOYMENT_CATEGORY FREQUENCY INTERNAL_ADDRESS_LINE MANAGER_FLAG NORMAL_HOURS PERF_REVIEW_PERIOD PERF_REVIEW_PERIOD_FREQUENCY PERIOD_OF_SERVICE_ID PROBATION_PERIOD PROBATION_UNIT SAL_REVIEW_PERIOD SAL_REVIEW_PERIOD_FREQUENCY SET_OF_BOOKS_ID SOURCE_TYPE TIME_NORMAL_FINISH TIME_NORMAL_START BARGAINING_UNIT_CODE LABOUR_UNION_MEMBER_FLAG HOURLY_SALARIED_CODE REQUEST_ID PROGRAM_APPLICATION_ID PROGRAM_ID PROGRAM_UPDATE_DATE ASS_ATTRIBUTE_CATEGORY ASS_ATTRIBUTE1 ASS_ATTRIBUTE2 ASS_ATTRIBUTE3 ASS_ATTRIBUTE4 ASS_ATTRIBUTE5 ASS_ATTRIBUTE6 ASS_ATTRIBUTE7 ASS_ATTRIBUTE8 ASS_ATTRIBUTE9 ASS_ATTRIBUTE10 ASS_ATTRIBUTE11 ASS_ATTRIBUTE12 ASS_ATTRIBUTE13 ASS_ATTRIBUTE14 ASS_ATTRIBUTE15 ASS_ATTRIBUTE16 ASS_ATTRIBUTE17 ASS_ATTRIBUTE18 ASS_ATTRIBUTE19 ASS_ATTRIBUTE20 ASS_ATTRIBUTE21 ASS_ATTRIBUTE22 ASS_ATTRIBUTE23 ASS_ATTRIBUTE24 ASS_ATTRIBUTE25 ASS_ATTRIBUTE26 ASS_ATTRIBUTE27 ASS_ATTRIBUTE28 ASS_ATTRIBUTE29 ASS_ATTRIBUTE30 LAST_UPDATE_DATE LAST_UPDATED_BY LAST_UPDATE_LOGIN CREATED_BY CREATION_DATE TITLE OBJECT_VERSION_NUMBER
931510 7-Nov-08 31-Dec-12 122 (null) (null) (null) 3978 1 (null) 14402 (null) 220150 (null) 734956 (null) (null) 476 (null) (null) (null) (null) 2 E Y (null) 100035417-2 (null) (null) (null) 45948739 (null) (null) (null) (null) (null) (null) (null) 868007 (null) (null) (null) (null) 449 (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null)
797386 26-Aug-08 26-Aug-08 122 (null) (null) (null) 3980 3 (null) 14402 (null) 218925 (null) 734956 (null) (null) 476 (null) (null) (null) (null) 1 E Y (null) 100035417 (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) 740071 (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null)
916076 26-Aug-08 31-Dec-12 122 (null) (null) (null) 3980 1 4 14402 (null) 218925 (null) 734956 (null) (null) 476 (null) (null) (null) (null) 1 B Y (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null)
797386 25-Feb-08 25-Aug-08 122 (null) (null) (null) 3980 1 (null) 14402 (null) 218925 (null) 734956 (null) (null) 476 (null) (null) (null) (null) 1 E Y (null) 100035417 (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) 740071 (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) (null) -
Urgent!! how to find the recent committed record
how to find the recent commited record
if the records are inserted at the same time?Use ORDER BY(DateColumn)...
I don't have any other idea... -
How to find total memory for Oralce Memory utilization
Hi,
How to find total amount of memory utilized by oracle including SGA+PGA+PROCESS
Thanks,
AbkIs you OS 32-bit ? If you add /3gb in boot.ini , then it will limit oracle.exe to go only upto 3gb.
Add /PAE in the boot.ini and remove /3gb.
then use db_block_buffers parameter instead of db_cache_size
for using db_block_buffers, you need to set another parameter also.
use_indirect_data_buffers=true
db_block_buffers=<number of blocks
db_block_buffers=db_cache_size in kilobytes /db_block_size
(since db_block_size is 8 kllobytes by default in Windows..
{color:blue}Please refer Metalink Note : [373602.1|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=373602.1]{color}
Edited by: Mahesh Menon on Apr 29, 2009 2:56 PM -
How to find the recent committed record
how to find the recent commited record
if the records are inserted at the same time?Use ORDER BY(DateColumn)...
I don't have any other idea... -
How to find latest load information for a DSO?
Hello, I would like to know how to find the number of records loaded in the most recent load to a DSO without counting the records in the active table of the DSO. Is there some table that keep stats on requests loaded in a DSO?
Thanks.I already tried that (where used) and had trouble finding the right table. Does anyone know which table holds this information that's shown on the "Requests" screen of the DSO management screen?
I was able to do it this way:
find the most recent load for the DSO in table RSICCONT
Find all the entries in RSMONICDP WHERE RNR = RSICCONT-RNR
SUM REC_INSERT COLUMN
I didn't want to count the entries in the active table of the DSO, since it's huge DSO.
Still looking for any better way of doing this. Possibly a single table that holds the information that's shown on the Manage screen?
Thanks. -
How can i find total no of records in a cursor
Hi
Its very helpful if anybody reply my doubt
I have a cursor declared in a procedure.
i opened that cursor, i want to know the count of records in the opened cursor, means total count of records.
is it possible??
Pls reply ASAPHI,
this is a simple example with a cursor over user_tables view:
set serveroutput on
DECLARE
CURSOR c_test IS
SELECT table_name FROM user_tables;
type t_reg is table of varchar2(30);
l_reg t_reg;
BEGIN
OPEN c_test;
fetch c_test bulk collect into l_reg;
dbms_output.put_line(c_test%ROWCOUNT);
END;
/Output:
SQL>
SQL> set serveroutput on
SQL> DECLARE
2 CURSOR c_test IS
3 SELECT table_name FROM user_tables;
4 type t_reg is table of varchar2(30);
5 l_reg t_reg;
6 BEGIN
7 OPEN c_test;
8
9 fetch c_test bulk collect into l_reg;
10
11 dbms_output.put_line(c_test%ROWCOUNT);
12 END;
13 /
42
PL/SQL procedure successfully completed
SQL> Regards,
Edited by: Walter Fernández on Nov 29, 2008 8:59 AM - Adding output... -
How to find total in-use connection of a connection pool in Sun apps 8.1 ur
Hi
Thank you for reading my post.
how i can find total open (in-use)connection of a connection pool ?
sometimes my application take some longer time to do an specefic job , now i want to see how much connection of the pool is open and in use
thanksHi,
Sun app.server provides monitoring facility using which we can find how many connections are in use, how many clients are in wait-queue etc.,
You can refer the following URL of
Sun Java System Application Server 8 - Administration guide.
http://docs.sun.com/app/docs/doc/819-2554/6n4r8s7ti?a=view
for enabling monitoring and getting monitoring values for a particular conn. pool
Thanks,
-Jagadish
Maybe you are looking for
-
Problem deploying sample web dynpro application.
I am not able to deploy and run a sample code of Web Dynpro. It gives the following error. <b>Caught exception while checking the login credentials for SAP J2EE Engine. Check your login information. Exception is: com.sap.engine.services.jndi.persiste
-
How to export report IN CSV format through JAVA.
how to export report in csv format.when try to export in csv format.its exporting into csv but report not containing column heading , report heading and it showing all the data in a single line.we have integrated the reports with java.
-
Need help with iPod in a Lexus (2010)
I am trying to get help making my iPod work correctly in my Lexus using USB. When I restart the car, the iPod does not start back at the same place as when I turned the car off. It backs up several minutes.
-
My laptop loads up and comes to the sign on page but after I have put my password in the screen goes blank and black This question was solved. View Solution.
-
Update to iOS 5 without Factory Reset?
Is it possible? Cause so far it just seems like i'm ******...